Search NASA⌕ Search

SEARCH · Search NASA

Results for “detonation velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Non-solar UV produced ions observed optically from the 'Crit I' critical velocity ionization experiment

A critical velocity ionization experiment was carried out with a heavily instrumented rocket launched from Wallops Island on May 13, 1986. Two neutral barium beams were created by explosive shaped charges released from the rocket and detonated at 48 deg to B at altitudes near 400 km and below the solar UV cutoff. Critical velocity ionization was expected to form a detectable ion jet along the release field line, but, instead, an ion cloud of fairly uniform intensity was observed stretching from the release field line across to where the neutral barium jet reached sunlight. The process creating these ions must have been present from the time of the release; the efficiency is estimated to be equivalent to an ionization time constant of 1800 sec. This ionization is most likely from collisions between the neutral barium jet and the ambient atmospheric oxygen, and, if so, the cross section for collisional ionization is 9 x 10 to the -18th sq cm.

Stenbaek-Nielsen, H. C.↗
DOE OSTI2022

Revisiting the Kinematics of the Cylinder Test

The cylinder expansion experiment is a well-established performance test for condensed explosives that is utilized routinely to determine pressure-energy-volume relationships for detonation products. The modern cylinder test employs optical interferometric techniques to measure velocity, as opposed to older realizations where streak cameras were commonplace. Despite their widespread use, questions sometimes remain as to what kind of data the velocity diagnostics in a cylinder test provide along with how to interpret such measurements and relate them to physical quantities of interest. Here in this study, equations are derived that fully describe the kinematics of the cylinder wall during expansion. These equations are then applied to experimental as well as synthetic data generated via a hydrodynamic simulation in order to verify the mathematical framework developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1968

Continuous detonation reaction engine

Reaction engine operates on the principles of a controlled condensed detonation rather than on the principles of gas expansion. The detonation results in reaction products that are expelled at a much higher velocity.

Lange, O. H.↗
NASA NTRS1961

A Technique for Obtaining Hypervelocity Impact Data by using the Relative Velocities of Two Projectiles

A facility has been developed and put into operation to determine the feasibility of obtaining hypervelocity impact data by using the relative velocities of two projectiles. The facility utilizes the technique of firing a target toward an oncoming high-velocity projectile so that the impact velocity is equal to the sum of the projectile velocity and the target velocity. A 37-millimeter powder gun is utilized to accelerate the targets, and a specially designed 22-caliber light-gas gun accelerates the impacting projectiles. The light-gas gun is operated by detonating an explosive charge which permits it to be synchronized with the firing of the 37-millimeter gun. Impact velocities as great as 21,850 ft/sec have been obtained during development of the facility. After the oncoming projectiles impact the targets fired from the 37-millimeter gun, these targets are recovered by allowing them to impact into Celotex and soft wooden blocks. The craters formed in the targets then can be observed and measured. The results of several preliminary firings of the facility are included in this report.

Kinard, William H.↗
DOE OSTI2021

Measuring an Off-center Detonation through Infrared Line Profiles: The Peculiar Type Ia Supernova SN 2020qxp/ASASSN-20jq

In this study, we present and analyze a near-infrared (NIR) spectrum of the underluminous Type Ia supernova SN 2020qxp/ASASSN-20jq obtained with NIRES at the Keck Observatory, 191 days after B-band maximum. The spectrum is dominated by a number of broad emission features, including the [Fe ιι] at 1.644 μm, which is highly asymmetric with a tilted top and a peak redshifted by ≈2000 km s -1 . In comparison with 2D non-LTE synthetic spectra computed from 3D simulations of off-center delayed-detonation Chandrasekhar-mass (M ch ) white dwarf (WD) models, we find good agreement between the observed lines and the synthetic profiles, and are able to unravel the structure of the progenitor’s envelope. We find that the size and tilt of the [Fe ιι] 1.644 μm profile (in velocity space) is an effective way to determine the location of an off-center delayed-detonation transition (DDT) and the viewing angle, and it requires a WD with a high central density of ~4 × 10 9 g cm -3 . We also tentatively identify a stable Ni feature around 1.9 μm characterized by a “pot-belly” profile that is slightly offset with respect to the kinematic center. In the case of SN 2020qxp/ASASSN-20jq, we estimate that the location of the DDT is ~0.3M WD off center, which gives rise to an asymmetric distribution of the underlying ejecta. We also demonstrate that low-luminosity and high-density WD SN Ia progenitors exhibit a very strong overlap of Ca and 56 Ni in physical space. This results in the formation of a prevalent [Ca ιι] 0.73 μm emission feature that is sensitive to asymmetry effects. Our findings are discussed within the context of alternative scenarios, including off-center C/O detonations in He-triggered sub-M Ch WDs and the direct collision of two WDs. Snapshot programs with Gemini/Keck/Very Large Telescope (VLT)/ELT-class instruments and our spectropolarimetry program are complementary to mid-IR spectra by the James Webb Space Telescope (JWST).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Investigating growth to detonation in vapor-deposited hexanitrostilbene and pentaerythritol tetranitrate films using high-throughput methods

In this work, a high-throughput experimental setup was used to characterize initiation threshold and growth to detonation in the explosives hexanitrostilbene (HNS) and pentaerythritol tetranitrate (PETN). The experiment sequentially launched an array of laser-driven flyers to shock samples arranged in a 96-well microplate geometry, with photonic Doppler velocimetry diagnostics to characterize flyer velocity and particle velocity at the explosive–substrate interface. Vapor-deposited films of HNS and PETN were used to provide numerous samples with various thicknesses, enabling characterization of the evolution of growth to detonation. One-dimensional hydrocode simulations were performed with reactions disabled to illustrate where the experimental data deviate from the predicted inert response. Prompt initiation was observed in 144 μm thick HNS films at flyer velocities near 3000 m/s and in 125 μm thick PETN films at flyer velocities near 2400 m/s. This experimental setup enables rapid quantification of the growth of reactions in explosive materials that can reach detonation at sub-millimeter length scales. These data can subsequently be used for parameterizing reactive burn models in hydrocode simulations, as discussed in Paper II [D. E. Kittell, R. Knepper, and A. S. Tappan, J. Appl. Phys. 131, 154902 (2022)].

36 MATERIALS SCIENCE↗
NASA NTRS1974

L = 1.24 conjugate magnetic field line tracing experiments with barium shaped charges

Description of three experiments involving the injection of barium ions into magnetic flux tubes with the aid of high-explosive shaped charges with hollow conical liners of barium metal. In these experiments (called Alco, Bubia, and Loro, respectively) the explosive charges were detonated at altitudes above 500 km, producing jets of barium plasma with initial velocities ranging from 8 to 20 km/sec. The most interesting result of the experiments, which were carried out near L = 1.24 and were successful in tracing an entire field line some 7000 km to the conjugate ionosphere, was the observation that for Loro and probably Alco the direction and rate of drift of the two ends of the field line were identical, whereas those for Bubia differed significantly. In the case of the Bubia event significant differences in magnitude and direction at the conjugate points are noted, which lead to the conclusion that the field line could not have been equipotential during the interval of observation.

Wescott, E. M.↗
NASA NTRS1984

Deflagration plasma thruster

This paper introduces the application of the magnetized plasma deflagration process to space propulsion. The deflagration process has the unique capability of efficiently converting input energy into kinetic energy in the accelerating direction. To illustrate the totally divergent characters of 'snowplow' detonation and deflagration discharges, examples of the differences between deflagration and detonation 'snowplow' discharges are expressed in terms of current densities, temperature, and particle velocities. Magnetic field profiles of the deflagration mode of discharges are measured. Typical attainable plasma characteristics are described in terms of velocity, electron temperature, and density, as well as measurement techniques. Specific impulses measured by piezo-electric probe and pendulum methods are presented. The influence of the transmission line in the discharge circuits on plasma velocity is measured by means of a microwave time-of-flight method. The results for the deflagration thruster are compared with other space thrusters. Further research areas are identified.

Cheng, D. Y.↗
NASA NTRS1974

A technique for generating shear waves in cylindrical shells under radial impact

Experimental techniques are developed to study and measure the shear-wave velocity in an aluminum cylindrical shell subjected to a radial impact. The radial impact is obtained by exploding an electrical detonator inserted in plastic plugs mounted on the end of the shell. Strain gages, mounted on the outside surface of the shell at various axial locations, are used to obtain oscilloscope traces from which the shear-wave velocity can be calculated.

Blum, A.↗
NASA NTRS1986

Star of Condor - A strontium critical velocity experiment, Peru, 1983

'Star of Condor' was a critical velocity experiment using Sr vapor produced in a radial shaped charge, which was carried to 571.11 km altitude on a Taurus-Tomahawk rocket launched from Punto Lobos, Peru, and detonated in the plane of the magnetic field lines so that all ranges of pitch angles from parallel to B to perpendicular to B were covered. Sr has a critical velocity of 3.3 km/s, and from observation, 42.5 percent of the neutral Sr gas had a velocity component perpendicular to B exceeding that value. No Sr ion emissions were detected shortly after the burst with usual TV integration times. However, about 10 min after the detonation a faint field-aligned streak was discovered with long TV integration times. The brightness is estimated as 5 R, which, combined with the streak geometry, implies an ion production of 2.4 x 10 to the 19th ions. This is only 0.0036 percent ionization of the Sr vapor. All the ions could easily have been produced by thermal ionization from the original detonation thermal distribution. The breakup of the Sr gas into small bloblike structures may have allowed the high-energy electrons to escape before an ionization cascade could be produced. For whatever reason, the Alfven mechanism proposed for space plasmas in the absence of laboratory walls did not produce an ionization cascade in the experiment.

Wescott, E. M.↗
NASA NTRS1985

PN velocity beneath Western New Mexico and Eastern Arizona

The experiment involved observing Pn arrivals on an areal array of 7 seismic stations located in the transition zone and along the Jemez lineament. Explosions in coal and copper mines in New Mexico and Arizona were used as energy sources as well as military detonations at White Sands Missile Range, New Mexico, Yuma, Arizona, and the Nevada Test Site. Very preliminary results suggest a Pn velocity of 7.94 km/s (with a fairly large uncertainty) beneath the study area. The Pn delay times, which can be converted to estimates of crustal thickness given knowledge of the velocity structure of the crust increase both to the north and east of Springerville, Arizona. As a constraint on the velocity of Pn, researchers analyzed the reversed refraction line GNOME-HARDHAT which passes through Springerville oriented NW to SE. This analysis resulted in a Pn velocity of 7.9-8.0 km/s for the transition zone. These preliminary results suggest that a normal Pn velocity might persist even though the crust thins (from north to south) by 15 km along the length of the Arizona-New Mexico border. If the upper mantle is currently hot anywhere in western New Mexico or eastern Arizona then the dimensions of the heat source (or sources) might be small compared to the intra-station distances of the seismic arrays used to estimate the velocity of Pn.

Jaksha, L. H.↗
DOE OSTI2021

Multidimensional Parameter Study of Double Detonation Type Ia Supernovae Originating from Thin Helium Shell White Dwarfs

Despite the importance of Type Ia supernovae (SNe Ia) throughout astronomy, the precise progenitor systems and explosion mechanisms that drive SNe Ia are still unknown. An explosion scenario that has gained traction recently is double detonation, in which an accreted shell of He detonates and triggers a secondary detonation in the underlying white dwarf. Our research presents a number of high-resolution, multidimensional, full-star simulations of thin-He-shell, sub-Chandrasekhar-mass white dwarf progenitors that undergo a double detonation. This suite of thin-shell progenitors incorporates He shells that are thinner than those in previous multidimensional studies. We confirm the viability of the double detonation across a range of He-shell parameter space, as well as present bulk yields and ejecta profiles for each progenitor. The yields obtained are generally consistent with previous works and indicate the likelihood of producing observables that resemble SNe Ia. The dimensionality of our simulations allow us to examine features of the double detonation more closely, including the details of the off-center secondary ignition and asymmetric ejecta. We find considerable differences in the high-velocity extent of postdetonation products across different lines of sight. The data from this work will be used to generate predicted observables and may further support the viability of the double detonation scenario as an SN Ia channel, as well as show how the properties of the progenitor or viewing angle may influence trends in observable characteristics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Magnetic Velocity Gauges: Effects of Misalignment

Embedded velocity gauges are standardly used at LANL on gas gun experiments of a shock to-detonation transition. The experiments are intended to be one-dimensional with a planar shock driven by the projectile from a gas gun propagating along the axis of the HE cylinder. As disussed by Gustavsen et al. [1999], the accuracy of the gauges depends on the alignment of the directions of shock propagation, magnetic field and the active gauge element. A source of inaccuracies is from tilt or misalignment angle at impact between the projectile surface and the HE surface; typically a few milliradians. This leads to the shock propagating at a slight angle to the axis of the HE cylinder and can affect the shock rise time of the velocity gauges, the time offset between the tracker gauges for the trajectory of the lead shock, and the gauge positions in the direction of propagation. It is important to note that tilt is characterized by 2 parameters; the magnitude of the angle relative to the HE axis and the direction in the plane transverse to the HE axis. Here we derive the uncertainties from tilt to leading order in the tilt angle.

42 ENGINEERING↗
DOE OSTI2020

Wedding Cake Experiments Design and Data Packages (V.2)

This report documents the design and data for four related experiments known as the Wedding Cake shots. It is a revised version of LA-UR-17-28352. The basic designs of these four shots are the same. A high-explosive plane-wave lens launches a flyer towards an acceptor material with a smaller diameter. This acceptor is either another piece of high-explosive or a piece of polyethylene. A detonation or shock wave propagates through this material and launches a second flyer. The velocities of both flyers are recorded using Photon Doppler Velocimetry (PDV). The overall shape of the shots is reminiscent of a tiered wedding cake and, consequently, these shots are know as the Wedding Cake shots. Details of the shot assembly are shown in the Wedding Cake Assembly Drawing and component drawings that accompany this report.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1982

Dynamic effects of combustion

The dynamic effects of combustion are due to the evolution of exothermic energy and its deposition in the compressible medium where the process takes place. The paper examines the dynamics of combustion phenomena, including ignition, turbulent flame propagation (inflammation), explosion, and detonation, with emphasis on their exothermic characteristics. Ignition and explosion are treated as problems of nonlinear mechanics, and their dynamic behavior is described in terms of phase space models and cinematographic laser shear interferograms. The results of a numerical random vortex model of turbulent flame propagation are confirmed in a combustion tunnel experiment, where it was observed that a fresh mixture of burnt and unburnt gases can sustain combustion with a relatively small expenditure of overall mass flow, due to the increasing specific volume of burnt gases inside the flame front. An isentropic pressure wave is found to precede the accelerating flame in the process of detonation, and components of this presssure wave are shown to propagate at local sonic velocities.

Oppenheim, A. K.↗
NASA NTRS1991

Apparatus and method for explosive bonding to edge of flyer plate

The invention is an apparatus and a process for the explosive joining of a flyer plate and a base plate. The apparatus consists of a flyer plate positioned over a base plate. The flyer plate has a notch containing a filler material in intimate contact with the flyer plate. An adhesive means holds a ribbon explosive partially overlapping the notch in the flyer plate. A detonating means initiates the ribbon explosive that drives the flyer plate to accomplish a high velocity, angular collision between the mating surfaces. This collision creates surface melts and effacing bonding, resulting in electron sharing linkups between the plates. An unbonded tab fractures at a base of the notch leaving a bond to an edge of the attached flyer plate.

Bement, Laurence J.↗
NASA NTRS1991

Permanent wire splicing by an explosive joining process

The invention is an apparatus and method for wire splicing using an explosive joining process. The apparatus consists of a prebent, U-shaped strap of metal that slides over prepositioned wires. A standoff means separates the wires from the strap before joining. An adhesive means holds two ribbon explosives in position centered over the U-shaped strap. A detonating means connects to the ribbon explosives. The process involves spreading strands of each wire to be joined into a flat plane. The process then requires alternating each strand in alignment to form a mesh-like arrangement with an overlapped area. The strap slides over the strands of the wires, and the standoff means is positioned between the two surfaces. The detonating means then initiates the ribbon explosives that drive the strap to accomplish a high velocity, angular collision between the mating surfaces. This collision creates surface melts and collision bonding results in electron sharing linkups.

Bement, Laurence J.↗
NASA NTRS1997

Explosive Spot Joining of Metals

The invention is an apparatus and method for wire splicing using an explosive joining process. The apparatus consists of a prebend, U-shaped strap of metal that slides over prepositioned wires. A standoff means separates the wires from the strap before joining. An adhesive means holds two ribbon explosives in position centered over the U-shaped strap. A detonating means connects to the ribbon explosives. The process involves spreading strands of each wire to be joined into a flat plane. The process then requires alternating each strand in alignment to form a mesh-like arrangement with an overlapped area. The strap slides over the strands of the wires. and the standoff means is positioned between the two surfaces. The detonating means then initiates the ribbon explosives that drive the strap to accomplish a high velocity. angular collision between the mating surfaces. This collision creates surface melts and collision bonding resulting in electron-sharing linkups.

Bement, Laurence J.↗