Search NASA⌕ Search

SEARCH · Search NASA

Results for “developing countries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Stereotactic Radiotherapy of Primary Lung Cancer and Other Targets: Results of Consultant Meeting of the International Atomic Energy Agency

To evaluate the current status of stereotactic body radiotherapy (SBRT) and identify both advantages and disadvantages of its use in developing countries, a meeting composed of consultants of the International Atomic Energy Agency was held in Vienna in November 2006. Owing to continuous developments in the field, the meeting was extended by subsequent discussions and correspondence (2007-2010), which led to the summary presented here. The advantages and disadvantages of SBRT expected to be encountered in developing countries were identified. The definitions, typical treatment courses, and clinical results were presented. Thereafter, minimal methodology/technology requirements for SBRT were evaluated. Finally, characteristics of SBRT for developing countries were recommended. Patients for SBRT should be carefully selected, because single high-dose radiotherapy may cause serious complications in some serial organs at risk. Clinical experiences have been reported in some populations of lung cancer, lung oligometastases, liver cancer, pancreas cancer, and kidney cancer. Despite the disadvantages expected to be experienced in developing countries, SBRT using fewer fractions may be useful in selected patients with various extracranial cancers with favorable outcome and low toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hopes Beyond PET Recycling: Environmentally Clean and Engineeringly Applicable

Disposal of plastics in the environment has become a core of anxiety in developing countries, while in the developed countries the focus has additionally been placed on design and manufacture of emerging products from plastic wastes—a somewhat vague yet promising horizon. Central to environmental concerns are poly(ethylene terephthalate) (PET) wastes, mainly from post-consumer bottles. Because of a considerable drop in molecular weight in the course of recycling, recycled PETs are not suitable for engineering uses. An efficient yet reasonably green synthesis route is employed here to convert PET wastes into polyurethane, and then carbon nanotubes (CNTs) was added at different levels to obtain nanocomposites with high mechanical properties. The effects of isocyanate (NCO)/hydroxyl (OH) molar ratio and CNTs content on the morphology, physical and mechanical properties were discussed. Chemical/physical crosslink density was calculated from initial slope of stress–strain curves, Mooney–Rivlin plots, strain-hardening modulus, rubbery-plateau storage modulus and swelling data. High tensile strength (300 MPa) and breaking elongation (160%) of polyurethane/CNTs nanocomposites born from PET wastes seemed promising. Microscopic analyses by AFM, SEM, and TEM gave useful information about distribution of CNTs in polyurethane. Lastly, structural changes were correlated to mechanical properties improvement.

36 MATERIALS SCIENCE↗

Utility aspects of space power: Load management versus source management

Electrical power, as an area of study, is relatively young as compared to language, chemistry, physics, mathematics, philosophy, metallurgy, textiles, transportation, or farming. Practically all of the technology that has enabled the huge, continent-spanning power grids that have become ubiquitous in developed countries was developed in the last 150 years. In fact, Tesla's advocacy of alternating current for transmission just won out in the beginning of this century. Despite the novelty of the field as a whole, space power applications are, of course, much newer. This paper looks at the history of space power, and compares it to its older sibling on earth, forming a basis for determining appropriate transitions of technology from the terrestrial realm to space applications.

Walls, B.↗

International Assistance for Low-Emission Development Planning: Coordinated Low Emissions Assistance Network (CLEAN) Inventory of Activities and Tools--Preliminary Trends

The Coordinated Low Emissions Assistance Network (CLEAN) is a voluntary network of international practitioners supporting low-emission planning in developing countries. The network seeks to improve quality of support through sharing project information, tools, best practices and lessons, and by fostering harmonized assistance. CLEAN has developed an inventory to track and analyze internationaltechnical support and tools for low-carbon planning activities in developing countries. This paper presents a preliminary analysis of the inventory to help identify trends in assistance activities and tools available to support developing countries with low-emission planning.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Can Control Banding be better than traditional Industrial Hygiene?

The answer to this question should be 'no' if you can afford it and 'yes' if you cannot. However, Control Banding (CB) is proving itself in areas with uncertainties. This could be either a lack of knowledge--as with nanomaterials or when lacking an OEL--or with the lack or expertise, as can be seen with SMEs and in Economically Developing Countries (EDCs). Over 90% of the world's workers do not have access to occupational safety, health, and hygiene (OSHH) professionals and traditional quantitative risk assessment methods to achieve prevention from acquiring work-related illness and injury. Although risk factors for work-related illness and disease are well known, until the recent growth of CB there had yet to be designed and implemented a comprehensive OSHH process that focuses on achieving minimization of these occupational risk factors for the vast majority of the global workforce. This problem exists for three primary reasons: (1) There are not a sufficient number of trained and qualified OSHH professionals worldwide to attempt to offer comparable levels of traditional services necessary to achieve prevention; (2) The vast majority of OSHH professionals, and the funds to afford their conventional approaches, are concentrated in Developed Countries, such as those in the EU and the US, whereas the greatest need for work-related disease, illness, and injury prevention lies within EDCs; and (3) Even within Developed Countries, the funding to acquire the services of OSHH professionals sits primarily within the largest of industries and governmental institutions. This problem renders a void of occupational risk management for the professions and trades within EDCs and similarly the SMEs within even the richest of Developed Countries. Further, conventional means to achieve such prevention rely heavily on exposure assessment sampling strategies that, although proven successful, are cost-prohibitive in these arenas.

99 GENERAL AND MISCELLANEOUS↗

Embodied carbon in the U.S. manufacturing and trade

On average, one quarter of the global carbon footprint is embodied in traded goods. These emissions are a growing issue for global efforts to decarbonize the world economy. Embodied emissions in trade are not accounted for by existing greenhouse gas accounting systems. For example, countries only report their domestic carbon emissions (also known as production-based or territorial accounting) to the Intergovernmental Panel on Climate Change (IPCC). If the embodied carbon in trade were accounted for and reported, the promising climate trends depicted by many countries would be negated or reversed. For example, many achievements of reducing emissions by developed countries under the Kyoto Protocol would actually appear as emissions outsourced to developing countries. Like many other developed countries, the United States is a net importer of embodied greenhouse gas (GHG) emissions in trade. The goal of this study was to calculate the carbon footprint of various sectors of the U.S. economy using the latest available data and based on that, estimate the embodied carbon in certain manufacturing sector products imported and exported by the U.S. First, we conducted an input-output analysis to calculate the carbon footprint of 401 aggregate level sectors of the U.S. economy. After that, for a selected number of manufacturing subsectors /products(hereafter referred to as products),we collected their trade(import/export) data and combined that with their computed carbon footprint to estimate the embodied carbon in import and export of these products for the U.S. While we conducted the carbon footprint analysis for sectors covering the entire U.S. economy (401 sectors), we only conducted the embodied carbon in trade analysis for a few products within specific aggregate level manufacturing sectors,such as computer and electronic product manufacturing (NAICS 334), transport equipment manufacturing (NAICS 336), machinery manufacturing (NAICS 333), and chemical manufacturing (NAICS 325). It is possible to do the detailed embodied carbon analysis for all other products within the various aggregate level manufacturing sectors of the U.S. economy, but given the scope of this study and space constraint of this report, we only present the results for a few products. The results of our analysis for the selected products show the embodied carbon in trade for each product by country and also show the rankings of countries in terms of top importers and exporters of embodied carbon in trade with the U.S. Our results show that in majority of cases, the U.S. is a net importer of embodied carbon in trade. Unless consumption-based accounting is used, the U.S. and other net embodied carbon importing countries may continue to outsource their emissions to meet their climate change mitigation targets under the Paris Agreement, as observed previously with the Kyoto Protocol. Some countries reported reductions that exceeded their Kyoto targets, however, the changes in emissions embodied in imports were comparable to or larger than changes in domestic emissions. Traded emissions undermined emissions reductions in the Kyoto Protocol, and threaten to continue to do so for the Paris Agreement. New climate policies such as California’s Buy Clean act, EU’s proposed border carbon tax adjustment, as well as efforts in the private sector can help address the embodied carbon in traded products.

54 ENVIRONMENTAL SCIENCES↗

Importance of context in adoption and progress in application of strategic environmental assessment: Experience of Thailand

Following the example of other developed countries, strategic environmental assessment (SEA) tool is now being introduced in developing countries, with the expectations, among others, that it will influence decision-making process in planning, and also usher in the participatory and collaborative planning towards a more sustainable track in development. This article examines Thailand's own recent introduction of SEA. The authors underscore the particularity of the Thai planning context as well as the broader governance structure and processes in the country as the critical factor influencing the extent, substance and form of adoption of SEA. Top-down tradition of planning and serious limitation of public participation opportunity structures and institutional culture have minimized the tool's positive impact and influence in development planning. Thailand's experience in SEA introduction thus reaffirms the important lesson from a number of other developing countries: that legal framework for SEA is necessary and critical especially in its initial adoption; and, that public participation needs to be supported too and institutionalized for the tool to fulfill its promise of improving environmental governance and optimizing potentials of development projects vis-a-vis various social and environmental concerns.

54 ENVIRONMENTAL SCIENCES↗

Composting projects under the Clean Development Mechanism: Sustainable contribution to mitigate climate change

The Clean Development Mechanism (CDM) of the Kyoto Protocol aims to reduce greenhouse gas emissions in developing countries and at the same time to assist these countries in sustainable development. While composting as a suitable mitigation option in the waste sector can clearly contribute to the former goal there are indications that high rents can also be achieved regarding the latter. In this article composting is compared with other CDM project types inside and outside the waste sector with regards to both project numbers and contribution to sustainable development. It is found that, despite the high number of waste projects, composting is underrepresented and a major reason for this fact is identified. Based on a multi-criteria analysis it is shown that composting has a higher potential for contribution to sustainable development than most other best in class projects. As these contributions can only be assured if certain requirements are followed, eight key obligations are presented.

09 BIOMASS FUELS↗

Municipal solid waste management in India: From waste disposal to recovery of resources?

Unlike that of western countries, the solid waste of Asian cities is often comprised of 70-80% organic matter, dirt and dust. Composting is considered to be the best option to deal with the waste generated. Composting helps reduce the waste transported to and disposed of in landfills. During the course of the research, the author learned that several developing countries established large-scale composting plants that eventually failed for various reasons. The main flaw that led to the unsuccessful establishment of the plants was the lack of application of simple scientific methods to select the material to be composted. Landfills have also been widely unsuccessful in countries like India because the landfill sites have a very limited time frame of usage. The population of the developing countries is another factor that detrimentally impacts the function of landfill sites. As the population keeps increasing, the garbage quantity also increases, which, in turn, exhausts the landfill sites. Landfills are also becoming increasingly expensive because of the rising costs of construction and operation. Incineration, which can greatly reduce the amount of incoming municipal solid waste, is the second most common method for disposal in developed countries. However, incinerator ash may contain hazardous materials including heavy metals and organic compounds such as dioxins, etc. Recycling plays a large role in solid waste management, especially in cities in developing countries. None of the three methods mentioned here are free from problems. The aim of this study is thus to compare the three methods, keeping in mind the costs that would be incurred by the respective governments, and identify the most economical and best option possible to combat the waste disposal problem.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GHG emission factors developed for the collection, transport and landfilling of municipal waste in South African municipalities

Highlights: ► An average GHG emission factor for the collection and transport of municipal solid waste in South Africa is calculated. ► A range of GHG emission factors for different types of landfills (including dumps) in South Africa are calculated. ► These factors are compared internationally and their implications for South Africa and developing countries are discussed . ► Areas for new research are highlighted. - Abstract: Greenhouse gas (GHG) emission factors are used with increased frequency for the accounting and reporting of GHG from waste management. However, these factors have been calculated for developed countries of the Northern Hemisphere and are lacking for developing countries. This paper shows how such factors have been developed for the collection, transport and landfilling of municipal waste in South Africa. As such it presents a model on how international results and methodology can be adapted and used to calculate country-specific GHG emission factors from waste. For the collection and transport of municipal waste in South Africa, the average diesel consumption is around 5 dm{sup 3} (litres) per tonne of wet waste and the associated GHG emissions are about 15 kg CO{sub 2} equivalents (CO{sub 2} e). Depending on the type of landfill, the GHG emissions from the landfilling of waste have been calculated to range from −145 to 1016 kg CO{sub 2} e per tonne of wet waste, when taking into account carbon storage, and from 441 to 2532 kg CO{sub 2} e per tonne of wet waste, when carbon storage is left out. The highest emission factor per unit of wet waste is for landfill sites without landfill gas collection and these are the dominant waste disposal facilities in South Africa. However, cash strapped municipalities in Africa and the developing world will not be able to significantly upgrade these sites and reduce their GHG burdens if there is no equivalent replacement of the Clean Development Mechanism (CDM) resulting from the Kyoto agreement. Other low cost avenues need to be investigated to suit local conditions, in particular landfill covers which enhance methane oxidation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characteristics of healthcare wastes

A comprehensive understanding of the quantities and characteristics of the material that needs to be managed is one of the most basic steps in the development of a plan for solid waste management. In this case, the material under consideration is the solid waste generated in healthcare facilities, also known as healthcare waste. Unfortunately, limited reliable information is available in the open literature on the quantities and characteristics of the various types of wastes that are generated in healthcare facilities. Thus, sound management of these wastes, particularly in developing countries, often is problematic. This article provides information on the quantities and properties of healthcare wastes in various types of facilities located in developing countries, as well as in some industrialized countries. Most of the information has been obtained from the open literature, although some information has been collected by the authors and from reports available to the authors. Only data collected within approximately the last 15 years and using prescribed methodologies are presented. The range of hospital waste generation (both infectious and mixed solid waste fractions) varies from 0.016 to 3.23 kg/bed-day. The relatively wide variation is due to the fact that some of the facilities surveyed in Ulaanbaatar include out-patient services and district health clinics; these facilities essentially provide very basic services and thus the quantities of waste generated are relatively small. On the other hand, the reported amount of infectious (clinical, yellow bag) waste varied from 0.01 to 0.65 kg/bed-day. The characteristics of the components of healthcare wastes, such as the bulk density and the calorific value, have substantial variability. This literature review and the associated attempt at a comparative analysis point to the need for worldwide consensus on the terms and characteristics that describe wastes from healthcare facilities. Such a consensus would greatly facilitate comparative analyses among different facilities, studies and countries.

54 ENVIRONMENTAL SCIENCES↗

Orbital remote sensing - Space technology applications in south-east Asia

The evolution of remote sensing techniques in the developing countries of southeast Asia is reviewed. The use of the images for monitoring soil, water, and vegetation resources, in order to develop a national policy for conservation of the resources, is described. The remote sensing data are helpful in observing deforestation in southeast Asia; however, excessive cloud coverage does not allow accurate evaluation of the rice crop. The effects of the capabilities of the developing countries to process the data and remote sensing program of industrial countries on the future application of satellite imagery in developing countries are studied. The need for improved data banking and dissemination of the imagery is analyzed. Agreements on proprietary rights due to the improved ground resolution of orbital sensors are required. The designing of remote sensing equipment to meet the requirements of its users is discussed.

Malingreau, J.-P.↗

Electronic waste management approaches: An overview

Highlights: ► Human toxicity of hazardous substances in e-waste. ► Environmental impacts of e-waste from disposal processes. ► Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) to and solve e-waste problems. ► Key issues relating to tools managing e-waste for sustainable e-waste management. - Abstract: Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Global trend of methane abatement inventions and widening mismatch with methane emissions

Substantially reducing methane emissions is the fastest way to repress near-term warming and is an essential prerequisite for reaching the 1.5 °C target. However, knowledge about the global invention trend, sectoral and national distribution and international diffusion of methane-targeted abatement technologies (MTATs) remains limited. On the basis of patent data, we identify more than 175,000 MTAT inventions applied between 1990 and 2019 by 133 countries or dependent territories. Our results revealed that after sustained growth of more than fourfold, the number of global high-quality MTAT inventions declined by 3.5% annually from 2010 to 2019. The sectoral and national-level distributions of MTAT inventions and methane emissions are strongly mismatched. Additionally, the international diffusion of MTATs is 11.1% lower than that of overall climate change mitigation technologies and most transfers occur between developed countries or flow to China, South Korea and Brazil; however, other developing countries and the least developed countries are rarely involved.

54 ENVIRONMENTAL SCIENCES↗

Contribution of the conferences of the parties and the renewable energy role for the fight against climate change

The Kyoto Protocol, which entered into force on 16 February 2005, commits developed countries to reduce their emissions of greenhouse gases by 5% in 2012 compared to 1990. Due to the abstention of the United States and the absence of constraint on Southern countries, the protocol establishes obligations only to countries that represent only 33% of global CO{sub 2} emissions. All the diplomatic effort is therefore to seek the commitment of discussion for the period after 2012. The participation of the United States and emerging countries is imperative. The essential point of this second negotiation process is to search in the effort to integrate the United States and the developing countries and, more particularly, emerging economies such as China, India or Brazil, whose current emissions and / or projected should exceed those of developed countries during the first half of the twenty-first century. Real progress has been made in recent years. Indeed, a first universal historic agreement and legally binding was adopted after two weeks of intense negotiations by the Parties from 30 November to 12 December 2015, which aims to limit global warming by the end of this century well below 2 ° C while continuing efforts to not exceed 1.5 ° C. Moreover, the European Union, China and the United States have expressed their willingness to reduce their greenhouse gas. Because, one of the great hopes of the fight against the emission of greenhouse gases is the development of renewable energy, the IPCC (Intergovernmental Panel on Climate Change) report highlights the need to move towards renewable energy sources. The European Union, China and United States also expressed their willingness to increase the share of renewable energy. It is therefore necessary to develop the only inexhaustible energy, renewable energy, to fight against climate change.

54 ENVIRONMENTAL SCIENCES↗

Greenhouse gases accounting and reporting for waste management - A South African perspective

This paper investigates how greenhouse gases are accounted and reported in the waste sector in South Africa. Developing countries (including South Africa) do not have binding emission reduction targets, but many of them publish different greenhouse gas emissions data which have been accounted and reported in different ways. Results show that for South Africa, inventories at national and municipal level are the most important tools in the process of accounting and reporting greenhouse gases from waste. For the development of these inventories international initiatives were important catalysts at national and municipal levels, and assisted in developing local expertise, resulting in increased output quality. However, discrepancies in the methodology used to account greenhouse gases from waste between inventories still remain a concern. This is a challenging issue for developing countries, especially African ones, since higher accuracy methods are more data intensive. Analysis of the South African inventories shows that results from the recent inventories can not be compared with older ones due to the use of different accounting methodologies. More recently the use of Clean Development Mechanism (CDM) procedures in Africa, geared towards direct measurements of greenhouse gases from landfill sites, has increased and resulted in an improvement of the quality of greenhouse gas inventories at municipal level.

54 ENVIRONMENTAL SCIENCES↗

Emerging trends in informal sector recycling in developing and transition countries

Highlights: • Reviewed emerging trends in Informal Sector Recycling (ISR) in developing countries. • In some countries we found that ISR is the key factor in the recycling of waste materials. • Overall impact of ISR upon the urban economy and environment is positive. • In some instances ISR subsidises large areas of the formal sector. • Ignoring the informal sector could result in unsustainable interventions. - Abstract: Optimistic estimates suggest that only 30–70% of waste generated in cities of developing countries is collected for disposal. As a result, uncollected waste is often disposed of into open dumps, along the streets or into water bodies. Quite often, this practice induces environmental degradation and public health risks. Notwithstanding, such practices also make waste materials readily available for itinerant waste pickers. These ‘scavengers’ as they are called, therefore perceive waste as a resource, for income generation. Literature suggests that Informal Sector Recycling (ISR) activity can bring other benefits such as, economic growth, litter control and resources conservation. This paper critically reviews trends in ISR activities in selected developing and transition countries. ISR often survives in very hostile social and physical environments largely because of negative Government and public attitude. Rather than being stigmatised, the sector should be recognised as an important element for achievement of sustainable waste management in developing countries. One solution to this problem could be the integration of ISR into the formal waste management system. To achieve ISR integration, this paper highlights six crucial aspects from literature: social acceptance, political will, mobilisation of cooperatives, partnerships with private enterprises, management and technical skills, as well as legal protection measures. It is important to note that not every country will have the wherewithal to achieve social inclusion and so the level of integration must be ‘flexible’. In addition, the structure of the ISR should not be based on a ‘universal’ model but should instead take into account local contexts and conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Highlights: Black-Right-Pointing-Pointer Literature of WEEE generation in developing countries is reviewed. Black-Right-Pointing-Pointer We analyse existing estimates of WEEE generation for Brazil. Black-Right-Pointing-Pointer We present a model for WEEE generation estimate. Black-Right-Pointing-Pointer WEEE generation of 3.77 kg/capita year for 2008 is estimated. Black-Right-Pointing-Pointer Use of constant lifetime should be avoided for non-mature market products. - Abstract: Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated. This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products. The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the 'boom' in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗