Search NASA⌕ Search

SEARCH · Search NASA

Results for “device simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗

Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy Studies of Hole-Selective Molybdenum Oxide Contacts in Silicon Solar Cells

In this study, substochiometric hole-selective molybdenum oxide (MoO x ) contacts in crystalline silicon (c-Si) solar cells were investigated by a combination of transmission electron microscopy (TEM) and spatially resolved electron energy-loss spectroscopy (SR-EELS). It was observed that a ≈ 4 nm SiO x interlayer grows at the MoO x /c-Si interface during the evaporation of MoO x over a c-Si substrate. SR-EELS analyses revealed the presence of a 1.5 nm diffused MoO x /indium tin oxide (ITO) interface in both as-deposited and annealed samples. Moreover, the presence of a 1 nm thin layer with a lower oxidation state of Mo was detected at the SiO x /MoO x interface in an as-deposited state, which disappears upon annealing. Altogether, it was evident that no hole-blocking interlayer is formed at the MoO x /ITO interface during annealing and homogenization of the MoO x layer takes place during the annealing process. Furthermore, device simulations revealed that efficient hole collection is dependent on MoO x work function and that reduction in the work function of MoO x results in loss of band bending and negatively impacts hole selectivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light-Enhanced Ion Migration in Two-Dimensional Perovskite Single Crystals Revealed in Carbon Nanotubes/Two-Dimensional Perovskite Heterostructure and Its Photomemory Application

Two-dimensional (2D) hybrid perovskite sandwiched between two long-chain organic layers is an emerging class of low-cost semiconductor materials with unique optical properties and improved moisture stability. Unlike conventional semiconductors, ion migration in perovskite is a unique phenomenon possibly responsible for long carrier lifetime, current-voltage hysteresis, and low-frequency giant dielectric response. While there are many studies of ion migration in bulk hybrid perovskite, not much is known for its 2D counterparts, especially for ion migration induced by light excitation. Here, we construct an exfoliated 2D perovskite/carbon nanotube (CNT) heterostructure field effect transistor (FET), not only to demonstrate its potential in photomemory applications, but also to study the light induced ion migration mechanisms. We show that the FET I-V characteristic curve can be regulated by light and shows two opposite trends under different CNT oxygen doping conditions. Our temperature-dependent study indicates that the change in the I-V curve is probably caused by ion redistribution in the 2D hybrid perovskite. The first principle calculation shows the reduction of the migration barrier of I vacancy under light excitation. The device simulation shows that the increase of 2D hybrid perovskite dielectric constant (enabled by the increased ion migration) can change the I-V curve in the trends observed experimentally. Finally, the so synthesized FET shows the multilevel photomemory function. Our work shows that not only we could understand the unique ion migration behavior in 2D hybrid perovskite, it might also be used for many future memory function related applications not realizable in traditional semiconductors.

36 MATERIALS SCIENCE↗

Efficient Steplike Carrier Multiplication in Percolative Networks of Epitaxially Connected PbSe Nanocrystals

Here, carrier multiplication (CM) is a process in which a single photon excites two or more electrons. CM is of interest to enhance the efficiency of a solar cell. Until now, CM in thin films and solar cells of semiconductor nanocrystals (NCs) has been found at photon energies well above the minimum required energy of twice the band gap. The high threshold of CM strongly limits the benefits for solar cell applications. We show that CM is more efficient in a percolative network of directly connected PbSe NCs. The CM threshold is at twice the band gap and increases in a steplike fashion with photon energy. A lower CM efficiency is found for a solid of weaker coupled NCs. This demonstrates that the coupling between NCs strongly affects the CM efficiency. According to device simulations, the measured CM efficiency would significantly enhance the power conversion efficiency of a solar cell.

14 SOLAR ENERGY↗

Ion-specific phenomena limit energy recovery in forward-biased bipolar membranes

The ability for bipolar membranes (BPMs) to interconvert voltage and pH makes them attractive materials for use in energy conversion and storage. Reverse-biased BPMs, which use electrical voltage to dissociate water into acid and base, have become increasingly well studied. However, forward-biased BPMs (FB-BPMs), in which voltage is extracted from pH gradients through recombination, require further study. Here physics-based modeling elucidates how the complex coupling of transport and kinetics dictates the performance of FB-BPMs in electrochemical devices. Simulations reveal that the open-circuit potential of FB-BPMs is dictated by the balance of ion recombination and crossover, where recombination of buffering counter-ions attenuates the open-circuit potential. Counter-ion mass-transport limitations and uptake of ionic impurities limit achievable current densities by reducing the applied pH gradient or the available fixed-charge sites that mediate recombination. Further, the model highlights the importance of selective ion management in mitigating energy losses and provides insight into the rational material design of FB-BPMs for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of secondary electron cascades in single-crystalline plasma-deposited diamond upon exposure to femtosecond x-ray pulses

Secondary electron cascades were measured in high purity single-crystalline chemical vapor deposition (CVD) diamond, following exposure to ultrashort hard x-ray pulses (140 fs full width at half maximum, 8.9 keV energy) from the Sub-Picosecond Pulse Source at the Stanford Linear Accelerator Center. We report measurements of the pair creation energy and of drift mobility of carriers in two CVD diamond crystals. This was done for the first time using femtosecond x-ray excitation. Values for the average pair creation energy were found to be 12.17{+-}0.57 and 11.81{+-}0.59 eV for the two crystals, respectively. These values are in good agreement with recent theoretical predictions. The average drift mobility of carriers, obtained by the best fit to device simulations, was {mu}{sub h}=2750 cm{sup 2}/V s for holes and was {mu}{sub e}=2760 cm{sup 2}/V s for electrons. These mobility values represent lower bounds for charge mobilities due to possible polarization of the samples. The results demonstrate outstanding electric properties and the enormous potential of diamond in ultrafast x-ray detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Circular dichroism in the electron microscope: Progress and applications (invited)

According to theory, x-ray magnetic circular dichroism in a synchrotron is equivalent to energy loss magnetic chiral dichroism (EMCD) in a transmission electron microscope (TEM). After a synopsis of the development of EMCD, the theoretical background is reviewed and recent results are presented, focusing on the study of magnetic nanoparticles for ferrofluids and Heusler alloys for spintronic devices. Simulated maps of the dichroic strength as a function of atom position in the crystal allow evaluating the influence of specimen thickness and sample tilt on the experimental EMCD signal. Finally, the possibility of direct observation of chiral electronic transitions with atomic resolution in a TEM is discussed.

36 MATERIALS SCIENCE↗

Fluctuations in induced charge introduced by Te inclusions within CdZnTe radiation detectors

Recently, homogenization theory based on a multiple-scale perturbation of the electron transport equation has been used to derive a mathematical framework for modeling the excess charge lost to Te inclusions within radiation detectors based on semi-insulating cadmium zinc telluride (CdZnTe). In that theory, the heterogeneous material is mathematically replaced by a homogenized CdZnTe crystal whose effective electron attenuation length incorporates the additional uniform electron trapping caused by the inclusions. In this paper, the homogenization theory is extended to incorporate fluctuations in the induced charge (i.e., charge collection nonuniformities) introduced by the random position and size distributions of a noncorrelated population of small (i.e, <20 {mu}m) Te inclusions. Analysis of the effective parameters derived within the homogenized framework is used to develop a probability distribution of effective electron attenuation lengths, and therefore effective mobility-lifetime products, as a function of both the position and size distribution of Te inclusions. Example distributions are detailed for the case of an exponential size distribution at various number densities. Further, it is demonstrated that the inclusion-induced material nonuniformities derived in this paper can be numerically sampled efficiently, making them applicable to Monte Carlo device simulation of realistic CdZnTe detectors. Simulated charge induction maps and pulse-height spectra are presented and compared to recently published measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Defect formation in Cu(In,Ga)Se{sub 2} thin films due to the presence of potassium during growth by low temperature co-evaporation process

Doping the Cu(In,Ga)Se{sub 2} (CIGS) absorber layer with alkaline metals is necessary to process high efficiency solar cells. When growth of CIGS solar cells is performed on soda-lime glass (SLG), the alkaline elements naturally diffuse from the substrate into the absorber layer. On the other hand, when CIGS is grown on alkaline free substrates, the alkaline metals have to be added from another source. In the past, Na was believed to be the most important dopant of the alkaline elements, even though K was also observed to diffuse into CIGS from the SLG. Recently, the beneficial effect of a post deposition treatment with KF was pointed out and enabled the production of a 20.4% CIGS solar cell grown at low substrate temperature (<500 °C). However, possible negative effects of the presence or addition of the alkaline impurities during the low temperature growth process were observed for Na, but were not investigated for K so far. In this study, we investigate in detail the role of K on the defect formation in CIGS layers deposited at low temperature on alkaline free polyimide with intentional addition of K during selected time intervals of the CIGS layer growth. By means of admittance spectroscopy and deep level transient spectroscopy, we identify a deep minority carrier trap at around 280 meV below the conduction band E{sub C} in CIGS layers grown with K. Its influence on recombination and minority carrier lifetime in the absorber layer is investigated with external quantum efficiency measurements and time-resolved photoluminescence. Furthermore, to support the experimental findings device simulations were performed using the software SCAPS.

36 MATERIALS SCIENCE↗

On the importance of AlGaN electron blocking layer design for GaN-based light-emitting diodes

There has been confusion regarding the usefulness of AlGaN electron blocking layer (EBL) in GaN-based light-emitting diodes (LEDs) with some published experimental data indicating that the LEDs without EBL performed better than those with it. InGaN/GaN LEDs have been investigated numerically to analyze its actual effect in these devices. Simulation results show that hole blocking effect of EBL mainly determines the effectiveness of using it which is more sensitive to its Al composition, band offset ratio, and polarization charges. It is found that the choice of Al composition is critical for EBL to improve the optical performance of GaN-based LEDs.

36 MATERIALS SCIENCE↗

A methodology to identify and quantify mobility-reducing defects in 4H-silicon carbide power metal-oxide-semiconductor field-effect transistors

In this paper, we present a methodology for the identification and quantification of defects responsible for low channel mobility in 4H-Silicon Carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs). To achieve this, we use an algorithm based on 2D-device simulations of a power MOSFET, density functional simulations, and measurement data. Using physical modeling of carrier mobility and interface traps, we reproduce the experimental I-V characteristics of a 4H-SiC doubly implanted MOSFET through drift-diffusion simulation. We extract the position of Fermi level and the occupied trap density as a function of applied bias and temperature. Using these inputs, our algorithm estimates the number of possible trap types, their energy levels, and concentrations at 4H-SiC/SiO{sub 2} interface. Subsequently, we use density functional theory (DFT)-based ab initio simulations to identify the atomic make-up of defects causing these trap levels. We study silicon vacancy and carbon di-interstitial defects in the SiC side of the interface. Our algorithm indicates that the D{sub it} spectrum near the conduction band edge (3.25 eV) is composed of three trap types located at 2.8–2.85 eV, 3.05 eV, and 3.1–3.2 eV, and also calculates their densities. Based on DFT simulations, this work attributes the trap levels very close to the conduction band edge to the C di-interstitial defect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A hybrid nanoantenna for highly enhanced directional spontaneous emission

Spontaneous emission modulated by a hybrid plasmonic nanoantenna has been investigated by employing finite-difference time-domain method. The hybrid nanoantenna configurations constituted by a gap hot-spot and of a plasmonic corrugated grating and a metal reflector sandwiching a SiO{sub 2} thin layer which appears promising for high spontaneous emission enhancement devices. Simulation assays show that the coupling between the gap-antenna and plasmonic corrugations reaches an ultra-high near-field enhancement factor in the excitation process. Moreover, concerning the emission process, the corrugations concentrate the far-field radiated power within a tiny angular volume, offering unprecedented collection efficiency. In the past decades, many kinds of optical antennas have been proposed and optimized to enhance single molecule detection. However, the excitation enhancement effect for single individual or dimmer plasmonic nanostructure is limited due to intrinsic nonradiative decay of the nanoparticle plasmon and quantum tunneling effect. The proposed hybrid configuration overwhelms the enhancement limit of single individual plasmonic structure. The findings provide an insight into spontaneous emission high enhancement through integrating the functions of different metallic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Near surface inversion layer recombination in Al{sub 2}O{sub 3} passivated n-type silicon

On n-type silicon, negatively charged surface passivation layers create a near surface recombination channel, which could significantly reduce the effective carrier lifetime at low injection levels (Δn < 10{sup 14 }cm{sup −3}). This effect is described by Shockley Read Hall recombination at homogeneously distributed defects in the silicon wafer. In the near surface region, fixed charges in the dielectric layer significantly change the carrier concentrations and the recombination rate of defects. Sentaurus device simulations show that the contribution of the near surface recombination to the effective carrier lifetime depends on the properties of the involved defects. The lifetime reduction is strongest when the involved defects have an energy level in the lower half of the band gap and a very high electron to hole capture cross section ratio. For the simulation, a very low defect density in the order of 10{sup 8 }cm{sup −3} is assumed, which is a realistic value in highly pure float zone silicon. Quasi-steady state photoconductance measurements on n-type silicon with Al{sub 2}O{sub 3} passivation are done and fitted with the recombination model. Very good correlation between simulation and experiment is achieved when the involved recombination centers have an electron to hole capture cross section ratio of 10{sup 7} and an energy level of −0.2 eV w.r.t. the intrinsic level. The simulated defect properties are discussed in respect of transition metal and doping related defects reported in literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on the negative bias illumination stress-induced instability of amorphous indium-tin-zinc-oxide thin film transistors

The quantitative analysis of mechanism on negative bias illumination stress (NBIS)-induced instability of amorphous indium-tin-zinc-oxide thin-film transistor (TFT) was suggested along with the effect of equivalent oxide thickness (EOT) of gate insulator. The analysis was implemented through combining the experimentally extracted density of subgap states and the device simulation. During NBIS, it was observed that the thicker EOT causes increase in both the shift of threshold voltage and the variation of subthreshold swing as well as the hump-like feature in a transfer curve. We found that the EOT-dependence of NBIS instability can be clearly explicated with the donor creation model, in which a larger amount of valence band tail states is transformed into either the ionized oxygen vacancy V{sub O}{sup 2+} or peroxide O{sub 2}{sup 2−} with the increase of EOT. It was also found that the V{sub O}{sup 2+}-related extrinsic factor accounts for 80%–92% of the total donor creation taking place in the valence band tail states while the rest is taken by the O{sub 2}{sup 2–} related intrinsic factor. The ratio of extrinsic factor compared to the total donor creation also increased with the increase of EOT, which could be explained by more prominent oxygen deficiency. The key founding of our work certainly represents that the established model should be considered very effective for analyzing the instability of the post-indium-gallium-zinc-oxide (IGZO) ZnO-based compound semiconductor TFTs with the mobility, which is much higher than those of a-IGZO TFTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passivation of phosphorus diffused silicon surfaces with Al{sub 2}O{sub 3}: Influence of surface doping concentration and thermal activation treatments

Thin layers of Al{sub 2}O{sub 3} are well known for the excellent passivation of p-type c-Si surfaces including highly doped p{sup +} emitters, due to a high density of fixed negative charges. Recent results indicate that Al{sub 2}O{sub 3} can also provide a good passivation of certain phosphorus-diffused n{sup +} c-Si surfaces. In this work, we studied the recombination at Al{sub 2}O{sub 3} passivated n{sup +} surfaces theoretically with device simulations and experimentally for Al{sub 2}O{sub 3} deposited with atomic layer deposition. The simulation results indicate that there is a certain surface doping concentration, where the recombination is maximal due to depletion or weak inversion of the charge carriers at the c-Si/Al{sub 2}O{sub 3} interface. This pronounced maximum was also observed experimentally for n{sup +} surfaces passivated either with Al{sub 2}O{sub 3} single layers or stacks of Al{sub 2}O{sub 3} capped by SiN{sub x}, when activated with a low temperature anneal (425 °C). In contrast, for Al{sub 2}O{sub 3}/SiN{sub x} stacks activated with a short high-temperature firing process (800 °C) a significant lower surface recombination was observed for most n{sup +} diffusion profiles without such a pronounced maximum. Based on experimentally determined interface properties and simulation results, we attribute this superior passivation quality after firing to a better chemical surface passivation, quantified by a lower interface defect density, in combination with a lower density of negative fixed charges. These experimental results reveal that Al{sub 2}O{sub 3}/SiN{sub x} stacks can provide not only excellent passivation on p{sup +} surfaces but also on n{sup +} surfaces for a wide range of surface doping concentrations when activated with short high-temperature treatments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band offsets of n-type electron-selective contacts on cuprous oxide (Cu{sub 2}O) for photovoltaics

The development of cuprous oxide (Cu{sub 2}O) photovoltaics (PVs) is limited by low device open-circuit voltages. A strong contributing factor to this underperformance is the conduction-band offset between Cu{sub 2}O and its n-type heterojunction partner or electron-selective contact. In the present work, a broad range of possible n-type materials is surveyed, including ZnO, ZnS, Zn(O,S), (Mg,Zn)O, TiO{sub 2}, CdS, and Ga{sub 2}O{sub 3}. Band offsets are determined through X-ray photoelectron spectroscopy and optical bandgap measurements. A majority of these materials is identified as having a negative conduction-band offset with respect to Cu{sub 2}O; the detrimental impact of this on open-circuit voltage (V{sub OC}) is evaluated through 1-D device simulation. These results suggest that doping density of the n-type material is important as well, and that a poorly optimized heterojunction can easily mask changes in bulk minority carrier lifetime. Promising heterojunction candidates identified here include Zn(O,S) with [S]/[Zn] ratios >70%, and Ga{sub 2}O{sub 3}, which both demonstrate slightly positive conduction-band offsets and high V{sub OC} potential. This experimental protocol and modeling may be generalized to evaluate the efficiency potential of candidate heterojunction partners for other PV absorbers, and the materials identified herein may be promising for other absorbers with low electron affinities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the use of a charged tunnel layer as a hole collector to improve the efficiency of amorphous silicon thin-film solar cells

A new concept, using a negatively charged tunnel layer as a hole collector, is proposed and theoretically investigated for application in amorphous silicon thin-film solar cells. The concept features a glass/transparent conductive oxide/ultra-thin negatively charged tunnel layer/intrinsic a-Si:H/n-doped a-Si:H/metal structure. The key feature of this so called t{sup +}-i-n structure is the introduction of a negatively charged tunnel layer (attracting holes from the intrinsic absorber layer), which substitutes the highly recombination active p-doped a-Si:H layer in a conventional p-i-n configuration. Atomic layer deposited aluminum oxide (ALD AlO{sub x}) is suggested as a potential candidate for such a tunnel layer. Using typical ALD AlO{sub x} parameters, a 27% relative efficiency increase (i.e., from 9.7% to 12.3%) is predicted theoretically for a single-junction a-Si:H solar cell on a textured superstrate. This prediction is based on parameters that reproduce the experimentally obtained external quantum efficiency and current-voltage characteristics of a conventional processed p-i-n a-Si:H solar cell, reaching 9.7% efficiency and serving as a reference. Subsequently, the p-doped a-Si:H layer is replaced by the tunnel layer (studied by means of numerical device simulation). Using a t{sup +}-i-n configuration instead of a conventional p-i-n configuration will not only increase the short-circuit current density (from 14.4 to 14.9 mA/cm{sup 2}, according to our simulations), it also enhances the open-circuit voltage and the fill factor (from 917 mV to 1.0 V and from 74% to 83%, respectively). For this concept to work efficiently, a high work function front electrode material or a high interface charge is needed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density-dependent electron transport and precise modeling of GaN high electron mobility transistors

We report on the direct measurement of two-dimensional sheet charge density dependence of electron transport in AlGaN/GaN high electron mobility transistors (HEMTs). Pulsed IV measurements established increasing electron velocities with decreasing sheet charge densities, resulting in saturation velocity of 1.9 × 10{sup 7 }cm/s at a low sheet charge density of 7.8 × 10{sup 11 }cm{sup −2}. An optical phonon emission-based electron velocity model for GaN is also presented. It accommodates stimulated longitudinal optical (LO) phonon emission which clamps the electron velocity with strong electron-phonon interaction and long LO phonon lifetime in GaN. A comparison with the measured density-dependent saturation velocity shows that it captures the dependence rather well. Finally, the experimental result is applied in TCAD-based device simulator to predict DC and small signal characteristics of a reported GaN HEMT. Good agreement between the simulated and reported experimental results validated the measurement presented in this report and established accurate modeling of GaN HEMTs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗