Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse interface method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The Schottky barrier modulation at PtSi/Si interface by strain and structural deformation

We show, using density functional theory (DFT) calculations, that the Schottky barrier height (SBH) at the PtSi/Si interface can be lowered by uniaxial strain applied not only on Si but also on PtSi. The strain was applied to the (001) direction of Si and PtSi, which is normal for the interface. The SBH of the hole is lowered by 0.08 eV under 2% of tensile strain on Si and by 0.09 eV under 4 % of compressive strain on PtSi. Because the SBH at PtSi/Si contact is approximately 0.2 eV, this amount of reduction can significantly lower the resistance of the PtSi/Si contact; thus applying uniaxial strain on both PtSi and Si possibly enhances the performance of Schottky barrier field effect transistors. Theoretical models of SB formation and conventional structure model are evaluated. It is found that Pt penetration into Si stabilizes the interface and lowers the SBH by approximately 0.1 eV from the bulk-terminated interface model, which implies that conventionally used bulk-terminated interface models have significant errors. Among the theoretical models of SB formation, the model of strong Fermi level pining adequately explains the electron transfer phenomena and SBH, but it has limited ability to explain SBH changes induced by changes of interface structure.

36 MATERIALS SCIENCE↗

Orientation dependences of atomic structures in chemically heterogeneous Cu{sub 50}Ta{sub 50}/Ta glass-crystal interfaces

Molecular dynamics simulations based on an angular-dependent potential were performed to examine the structural properties of chemically heterogeneous interfaces between amorphous Cu{sub 50}Ta{sub 50} and crystalline Ta. Several phenomena, namely, layering, crystallization, intermixing, and composition segregation, were observed in the Cu{sub 50}Ta{sub 50} region adjacent to the Ta layers. These interfacial behaviors are found to depend on the orientation of the underlying Ta substrate: Layering induced by Ta(110) extends the farthest into Cu{sub 50}Ta{sub 50}, crystallization in the Cu{sub 50}Ta{sub 50} region is most significant for interface against Ta(100), while inter-diffusion is most pronounced for Ta(111). It turns out that the induced layering behavior is dominated by the interlayer distances of the underlying Ta layers, while the degree of inter-diffusion is governed by the openness of the Ta crystalline layers. In addition, composition segregations are observed in all interface models, corresponding to the immiscible nature of the Cu-Ta system. Furthermore, Voronoi polyhedra 〈0,5,2,6〉 and 〈0,4,4,6〉 are found to be abundant in the vicinity of the interfaces for all models, whose presence is believed to facilitate the structural transition between amorphous and body centered cubic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and dynamics of POPC bilayers in water solutions of room temperature ionic liquids

Molecular dynamics simulations in the NPT ensemble have been carried out to investigate the effect of two room temperature ionic liquids (RTILs), on stacks of phospholipid bilayers in water. We consider RTIL compounds consisting of chloride ([bmim][Cl]) and hexafluorophosphate ([bmim][PF{sub 6}]) salts of the 1-buthyl-3-methylimidazolium ([bmim]{sup +}) cation, while the phospholipid bilayer is made of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC). Our investigations focus on structural and dynamical properties of phospholipid and water molecules that could be probed by inelastic and quasi-elastic neutron scattering measurements. The results confirm the fast incorporation of [bmim]{sup +} into the lipid phase already observed in previous simulations, driven by the Coulomb attraction of the cation for the most electronegative oxygens in the POPC head group and by sizeable dispersion forces binding the neutral hydrocarbon tails of [bmim]{sup +} and of POPC. The [bmim]{sup +} absorption into the bilayer favours the penetration of water into POPC, causes a slight but systematic thinning of the bilayer, and further stabilises hydrogen bonds at the lipid/water interface that already in pure samples (no RTIL) display a lifetime much longer than in bulk water. On the other hand, the effect of RTILs on the diffusion constant of POPC (D{sub POPC}) does not reveal a clearly identifiable trend, since D{sub POPC} increases upon addition of [bmim][Cl] and decreases in the [bmim][PF{sub 6}] case. Moreover, because of screening, the electrostatic signature of each bilayer is only moderately affected by the addition of RTIL ions in solution. The analysis of long wavelength fluctuations of the bilayers shows that RTIL sorption causes a general decrease of the lipid/water interfacial tension and bending rigidity, pointing to the destabilizing effect of RTILs on lipid bilayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

V&V for turbulent mixing in the intermediate asymptotic regime

Turbulent fluid flow interacts nonlinearly with a number of processes, including reactive flow (chemistry), radiation, and the transport of particles embedded in the flow. Subgrid scale modeling of these nonlinear processes is a major challenge to computational science. To this end, turbulent mixing of dissimilar fluids is a driver. Here we study validation issues for a class of turbulent mixing simulations. In previous work, we have obtained agreement between simulation and experiment. The present paper addresses a remaining issue, the role of meniscus related boundary effects for immiscible fluids in the validation process. Validation and even verification has been controversial for turbulent mixing flows, as commonly used numerical models are diffusive and the resulting numerical diffusion modifies the parameters of the problem and its solution. Additionally, numerical diffusion of concentration and temperature is well documented in the scientific literature for Eulerian simulations. Lagrangian simulations, which might appear to avoid this problem, are subject to mesh tangling, ensuing regridding and use of Arbitrary Lagrangian Eulerian codes to substitute for a pure Lagrangian algorithm. In practice, Lagrangian methods are potentially subject to the same numerical diffusion issues when used to study complex interface instabilities.

97 MATHEMATICS AND COMPUTING↗

A Variational Nodal Approach to 2D/1D Pin Resolved Neutron Transport: I Diffusion Theory

The variational nodal method (VNM) as implemented in the VARIANT code has been widely employed to fast reactor cores, but much less so for thermal reactors. In what follows we report the initial phase of development of the PANX code (Purdue - Argonne - Northwestern - Xi'an) for three-dimensional pin resolved PWR transport calculations. In two dimensions, prototype modifications of VARIANT using finite elements to obtain heterogeneous nodes and quasi-reflected interface conditions to reduce the high angular-order interface conditions, have been successfully employed to the 2D C5G7 benchmark. In three dimensions, however, the polynomial interface conditions employed in VARIANT smear fuel and coolant at each axial interface, leading to lack of convergence as the axial mesh is refined. This problem is also encountered in the 2D/1D approximations in MOC based methods. The intent of this work is to eliminate these interface homogenization effects from VNM calculations. For clarity, in this work we examine these phenomena in diffusion theory. The next stage of development will incorporate spherical harmonic trial functions to achieve more accurate transport solutions. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electric current–assisted direct joining of silicon carbide

Conventional direct joining technologies are difficult to use with silicon carbide (SiC) materials, especially for fiber composite forms of SiC, because of the harsh conditions required. Therefore, to reduce the temperature and/or process time required for the direct joining process, an electric current–assisted joining (ECAJ) method was studied. Joining of low–resistivity grade, nitrogen doped β-SiC was demonstrated at a relatively low nominal temperature of 1750 °C with a 10 min hold by enhancing the passage of current through the material. The joining mechanism is discussed in terms of localized overheating and accelerated self-diffusion at the interface. In the case of joining at 2160 °C for 1 min, rapid crystal growth of textured SiC was found at the interface. This study indicates that rapid ECAJ-based direct joining is a practical and appropriate method for joining SiC-based materials.

36 MATERIALS SCIENCE↗

Smoothed Boundary Method for simulating bulk and grain boundary transport in complex polycrystalline microstructures

Grain boundaries have a major impact on material properties, but explicit consideration of the complex geometries of grain structures in simulations poses a challenge. In this paper, we present a general method for incorporating the effect of grain boundaries based on the Smoothed Boundary Method (SBM). By using multiple domain parameters to define the domains of different grains, this method circumvents time-consuming mesh generation steps that are associated with finite element calculations involving complex microstructures. To validate the approach, we evaluate the accuracy of the SBM against the sharp interface method. The capabilities of this approach were demonstrated through simulations of surface and grain boundary diffusion, as well as those of electrochemical impedance spectroscopy. We conclude this method is applicable to many material systems in which grain boundaries play a crucial role.

36 MATERIALS SCIENCE↗

Forced diffusion via electrically induced crystallization for fabricating ZnO–Ti–Si structures

Highlights: • ZnO–Ti–Si system is very important for the structural design. • The electrically induced crystallization method is useful to diffusion process. • Intermetallic compound characteristics have been presented using electrically induced crystallization. • Interface mechanism about diffusion of TZO–TiSi{sub x}–Si structure is presented. - Abstract: Electrically induced crystallization (EIC) is a recently developed process for material modification. This study is applied to EIC to fabricate ZnO–Ti–Si multi-layer structures of various thicknesses to dope Ti into ZnO thin film and to form TiSi{sub x} intermetallic compound (IMC) in a single step. The IMC layer was confirmed using transmission electron microscopy images. The Ti layer thickness was more than 40 nm, which enhanced electron transmission and decreased the total electrical resistance in the structure. Finally, the diffusion mechanisms of EIC and the annealing process were investigated. This study shows that the EIC process has potential for industrial applications.

36 MATERIALS SCIENCE↗

First-principles study of twin grain boundaries in epitaxial BaSi{sub 2} on Si(111)

Epitaxial films of BaSi{sub 2} on Si(111) for solar cell applications possess three epitaxial variants and exhibit a minority carrier diffusion length (ca. 9.4 μm) much larger than the domain size (ca. 0.2 μm); thus, the domain boundaries (DBs) between the variants do not act as carrier recombination centers. In this work, transmission electron microscopy (TEM) was used to observe the atomic arrangements around the DBs in BaSi{sub 2} epitaxial films on Si(111), and the most stable atomic configuration was determined by first-principles calculations based on density functional theory to provide possible interface models. Bright-field TEM along the a-axis of BaSi{sub 2} revealed that each DB was a twin boundary between two different epitaxial variants, and that Ba{sup (II)} atoms form hexagons containing central Ba{sup (I)} atoms in both the bulk and DB regions. Four possible interface models containing Ba{sup (I)}-atom interface layers were constructed, each consistent with TEM observations and distinguished by the relationship between the Si tetrahedron arrays in the two domains adjacent across the interface. This study assessed the structural relaxation of initial interface models constructed from surface slabs terminated by Ba{sup (I)} atoms or from zigzag surface slabs terminated by Si tetrahedra and Ba{sup (II)} atoms. In these models, the interactions or relative positions between Si tetrahedra appear to dominate the relaxation behavior and DB energies. One of the four interface models whose relationship between first-neighboring Si tetrahedra across the interface was the same as that in the bulk was particularly stable, with a DB energy of 95 mJ/m{sup 2}. There were no significant differences in the partial densities of states and band gaps between the bulk and DB regions, and it was therefore concluded that such DBs do not affect the minority carrier properties of BaSi{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A numerical method for the quasi-incompressible Cahn–Hilliard–Navier–Stokes equations for variable density flows with a discrete energy law

In this paper, we investigate numerically a diffuse interface model for the Navier–Stokes equation with fluid–fluid interface when the fluids have different densities [48]. Under minor reformulation of the system, we show that there is a continuous energy law underlying the system, assuming that all variables have reasonable regularities. It is shown in the literature that an energy law preserving method will perform better for multiphase problems. Thus for the reformulated system, we design a C{sup 0} finite element method and a special temporal scheme where the energy law is preserved at the discrete level. Such a discrete energy law (almost the same as the continuous energy law) for this variable density two-phase flow model has never been established before with C{sup 0} finite element. A Newton method is introduced to linearise the highly non-linear system of our discretization scheme. Some numerical experiments are carried out using the adaptive mesh to investigate the scenario of coalescing and rising drops with differing density ratio. The snapshots for the evolution of the interface together with the adaptive mesh at different times are presented to show that the evolution, including the break-up/pinch-off of the drop, can be handled smoothly by our numerical scheme. The discrete energy functional for the system is examined to show that the energy law at the discrete level is preserved by our scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithium Intercalation in Core-Shell Materials-Theoretical Analysis

Core-shell composite structures are potential candidates for Li-ion battery electrodes as they can take advantage of materials with higher energy density and materials with higher cyclability. This paper derives an analytical solution for isotropic 1-dimensional diffusion with galvanostatic boundary condition in composite slab, cylinder and sphere using separation of variables method. A general interfacial condition has been used to represent the dynamics at the interface of the composite material rendering the solution useful for wide variety of battery materials. Using the derived analytical solution for diffusion, intercalation induced stresses were estimated for spherical core-shell materials. (C) 2014 The Electrochemical Society. All rights reserved.

Suthar, B↗

Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation

A high cut-off voltage is required for nickel-rich layered oxide LiNixCoyMnzO2 (NCM) to meet the high energy density requirement of lithium-ion batteries in electric vehicles. However, such a high voltage application leads to an unstable interface between NCM and liquid electrolytes. To stabilize the interface, the facile wet impregnation method has been developed to apply an ultra-thin Al2O3 coating layer on the NCM particles. This coating layer was found to have a strong interaction with the NCM and resulted in Al-doped NCM at the surface structure of NCM. The change of surface structure can not only reduce the surface resistance of lithium diffusion of LiNi0.5Co0.2Mn0.3O2 (NCM523), but also stabilize the solid electrolyte interface between NCM523 and the electrolyte with the cut-off voltage of 4.5 V vs. Li/Li+. Compared to other coating methods, wet impregnation coating can provide an ultra-thin and uniform coating with surface doping on NCM particles. Furthermore, this scalable coating method can be applied to various electrode materials without adding much additional cost.

25 ENERGY STORAGE↗

A composite grid solver for conjugate heat transfer in fluid-structure systems

We describe a numerical method for modeling temperature-dependent fluid flow coupled to heat transfer in solids. This approach to conjugate heat transfer can be used to compute transient and steady state solutions to a wide range of fluid-solid systems in complex two- and three-dimensional geometry. Fluids are modeled with the temperature-dependent incompressible Navier-Stokes equations using the Boussinesq approximation. Solids with heat transfer are modeled with the heat equation. Appropriate interface equations are applied to couple the solutions across different domains. The computational region is divided into a number of sub-domains corresponding to fluid domains and solid domains. There may be multiple fluid domains and multiple solid domains. Each fluid or solid sub-domain is discretized with an overlapping grid. The entire region is associated with a composite grid which is the union of the overlapping grids for the sub-domains. A different physics solver (fluid solver or solid solver) is associated with each sub-domain. A higher-level multi-domain solver manages the entire solution process. We propose and analyze some centered discrete approximations to the interface equations that have some desirable stability properties. The coupled interface equations may be solved directly when using explicit time-stepping methods in the sub-domains, resulting in a strongly coupled approach. The stability of the interface treatment in this case is independent of the relative sizes of the material properties in the two domains with the time-step only depending on the usual von Neumann conditions for each sub-domain. For implicit time-stepping methods we solve the interface equations in a weakly coupled fashion to avoid forming a coupled implicit system across all sub-domains. The convergence of this approach does depend on the relative sizes of the thermal conductivities and diffusivities. We analyze different iteration strategies for solving these implicit equations including the use of mixed (Robin) approximations at the interface. Numerical results are presented to illustrate the method. The accuracy of the technique is verified using the method of analytic solutions and by computing the solution to some heat exchanger problems where the exact solution is known. The technique is also applied to the modeling of an inertial-confinement-fusion hohlraum target and the flow of coolant past an hexagonal array of heated fuel rods. The multi-domain solver runs in parallel on distributed memory computers and some parallel results are provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetics and Mechanism of Ce(IV) Phase Transfer by the Neutral Extractants Tributyl Phosphate and N,N -Di(2-ethylhexyl)isobutyramide

Tributyl phosphate and N,N-di(2-ethylhexyl)isobutyramide (DEHiBA) are uranium-selective extractants that could be used to recover low-enriched uranium from commercial used nuclear fuel. The economic viability of liquid-liquid extraction processes for chemical separations depends on both thermodynamic and kinetic considerations. Here we used microfluidic droplet extraction to measure interfacial phase transfer rate constants for the extraction and stripping of Ce(IV), a non-radioactive actinide surrogate. The Damkohler numbers for each system were calculated and the phase transfer processes were determined to be diffusion-limited under all conditions, contrary to prior studies using constant interface stirred cells and single drop methods. A well-extracted 2:1 DEHiBA/Ce(IV) complex in the organic phase was determined from batch distribution studies, suggesting a different extraction mechanism for Ce(IV) compared with poorly extracted Pu(IV). Finally, phase disengagement rates were found to be rapid in both systems, in agreement with other studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the magnetic profile of diluted magnetic semiconductors using polarized neutron reflectivity

Room temperature ferromagnetism has been observed in the Cu doped ZnO films deposited under an oxygen partial pressure of 10 -3 and 10 -5 torr on Pt (200 nm)/Ti (45 nm)/Si (001) substrates using pulsed laser deposition. Due to the deposition at relatively high temperature (873 K), Cu and Ti atoms diffuse to the surface and interface, which significantly affects the magnetic properties. Depth sensitive polarized neutron reflectometry method provides the details of the composition and magnetization profiles and shows that an accumulation of Cu on the surface leads to an increase in the magnetization near the surface. Our results reveal that the presence of the copper at Zn sites induces ferromagnetism at room temperature, confirming intrinsic ferromagnetism.

36 MATERIALS SCIENCE↗

Synthesis of L1{sub 0}-FePt perpendicular films with controllable coercivity and intergranular exchange coupling by interfacial microstructure control

A series of FePtBi/Au multilayers were fabricated by magnetron sputtering. The interfacial microstructure control of Bi and Au atoms and its effect on comprehensive properties of L1{sub 0}-FePt perpendicular films were carefully studied. Results show that: perpendicular magnetic anisotropy of the L1{sub 0}-FePt film can be remarkably enhanced with the epitaxial inducement of Au atoms. On the other hand, intergranular exchange coupling (IEC) of the film is greatly decreased due to the isolation of FePt particles by nonmagnetic Au particles. Moreover, the controllable coercivity of the film can be realized by adjusting ordering degree of the film through diffusion of Bi atoms. Thus, an L1{sub 0}-FePt perpendicular film with controllable coercivity and no IEC is realized with the interfacial microstructure control of surfactant Bi and Au atoms.

36 MATERIALS SCIENCE↗

Molecular dynamics study of Si(100)-oxidation: SiO and Si emissions from Si/SiO{sub 2} interfaces and their incorporation into SiO{sub 2}

Dynamics of Si(100)-oxidation processes at the Si/SiO{sub 2} interface and in the SiO{sub 2} region are investigated focusing on SiO and Si emissions from the interface and the following incorporation into the SiO{sub 2} and/or substrate. Classical molecular dynamics (MD) simulations with variable charge interatomic potentials are performed to clarify these atomic processes. By incorporating oxygen atoms, two-folded Si atoms are formed after structural relaxation at the interface and are emitted as SiO molecules into SiO{sub 2}. The energy barrier of the SiO emission is estimated to be 1.20 eV on the basis of the enthalpy change in an MD simulation. The emitted SiO molecule is incorporated into the SiO{sub 2} network through a Si-O rebonding process with generating an oxygen vacancy. The energy barrier of the SiO incorporation is estimated to be 0.79–0.81 eV. The elementary process of oxygen vacancy diffusion leading to the complete SiO incorporation is also simulated, and the energy barriers are found to be relatively small, 0.71–0.79 eV. The energy changes of Si emissions into the substrate and SiO{sub 2} are estimated to be 2.97–7.81 eV, which are larger than the energy barrier of the SiO emission. This result suggests that, at the ideally flat Si/SiO{sub 2} interface, the SiO emission into the SiO{sub 2} region occurs prior to the Si emission, which is consistent with previous theoretical and experimental studies. The above mentioned typical atomic processes are successfully extracted from some (or one) of MD simulations among many trials in which a statistical procedure is partly employed. Our results give a unified understanding of Si oxidation processes from an atomistic point of view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗