Search NASA⌕ Search

SEARCH · Search NASA

Results for “directed assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Structures Self-Assembled Through Directional Solidification

Nanotechnology has created a demand for new fabrication methods with an emphasis on simple, low-cost techniques. Directional solidification of eutectics (DSE) is an unconventional approach in comparison to low-temperature biomimetic approaches. A technical challenge for DSE is producing microstructural architectures on the nanometer scale. In both processes, the driving force is the minimization of Gibb's free energy. Selfassembly by biomimetic approaches depends on weak interaction forces between organic molecules to define the architectural structure. The architectural structure for solidification depends on strong chemical bonding between atoms. Constituents partition into atomic-level arrangements at the liquid-solid interface to form polyphase structures, and this atomic-level arrangement at the liquid-solid interface is controlled by atomic diffusion and total undercooling due to composition (diffusion), kinetics, and curvature of the boundary phases. Judicious selection of the materials system and control of the total undercooling are the keys to producing structures on the nanometer scale. The silicon-titanium silicide (Si-TiSi2) eutectic forms a rod structure under isothermal cooling conditions. At the NASA Glenn Research Center, directional solidification was employed along with a thermal gradient to promote uniform rods oriented with the thermal gradient. The preceding photomicrograph shows the typical transverse microstructure of a solidified Si-TiSi2 eutectic composition. The dark and light gray regions are Si and TiSi2, respectively. Preferred rod orientation along the thermal gradient was poor. The ordered TiSi2 rods have a narrow distribution in diameter of 2 to 3 m, as shown. The rod diameter showed a weak dependence on process conditions. Anisotropic etch behavior between different phases provides the opportunity to fabricate structures with high aspect ratios. The photomicrographs show the resulting microstructure after a wet chemical etch and a dry plasma etch. The wet chemical etches the silicon away, exposing the TiSi2 rods, whereas plasma etching preferentially etches the Si-TiSi2 interface to form a crater. The porous architectures are applicable to fabricating microdevices or creating templates for part fabrication. The porous rod structure can serve as a platform for fabricating microplasma devices for propulsion or microheat exchangers and for fabricating microfilters for miniatured chemical reactors. Although more work is required, self-assembly from DSE can have a role in microdevice fabrication.

Dynys, Frederick W.↗

Adsorption and diffusion of Ru adatoms on Ru(0001)-supported graphene: Large-scale first-principles calculations

Large-scale first-principles density functional theory calculations are performed to investigate the adsorption and diffusion of Ru adatoms on monolayer graphene (G) supported on Ru(0001). The G sheet exhibits a periodic moiré-cell superstructure due to lattice mismatch. Within a moiré cell, there are three distinct regions: fcc, hcp, and mound, in which the C{sub 6}-ring center is above a fcc site, a hcp site, and a surface Ru atom of Ru(0001), respectively. The adsorption energy of a Ru adatom is evaluated at specific sites in these distinct regions. We find the strongest binding at an adsorption site above a C atom in the fcc region, next strongest in the hcp region, then the fcc-hcp boundary (ridge) between these regions, and the weakest binding in the mound region. Behavior is similar to that observed from small-unit-cell calculations of Habenicht et al. [Top. Catal. 57, 69 (2014)], which differ from previous large-scale calculations. We determine the minimum-energy path for local diffusion near the center of the fcc region and obtain a local diffusion barrier of ∼0.48 eV. We also estimate a significantly lower local diffusion barrier in the ridge region. These barriers and information on the adsorption energy variation facilitate development of a realistic model for the global potential energy surface for Ru adatoms. This in turn enables simulation studies elucidating diffusion-mediated directed-assembly of Ru nanoclusters during deposition of Ru on G/Ru(0001)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directed Self‐Assembly Pathways of Active Colloidal Clusters

Abstract Despite the mounting interest in synthetic active particles, too little is known about their assembly into higher‐order clusters. Here, mixing bare silica particles with Janus particles that are self‐propelled in electric fields, we assemble rotating chiral clusters of various sorts, their structures consisting of active particles wrapped around central “hub” particles. These clusters self‐assemble from the competition between standard energetic interactions and the need to be stable as the clusters rotate when the energy source is turned on, and fall apart when the energy input is off. This allows one to guide the formation of intended clusters, as the final structure depends notably on the sequence of steps in which the clusters form.

Zhang, Jie↗

Directed Self–Assembly Pathways of Active Colloidal Clusters

Despite the mounting interest in synthetic active particles, too little is known about their assembly into higher-order clusters. Here, mixing bare silica particles with Janus particles that are self-propelled in electric fields, we assemble rotating chiral clusters of various sorts, their structures consisting of active particles wrapped around central “hub” particles. These clusters self-assemble from the competition between standard energetic interactions and the need to be stable as the clusters rotate when the energy source is turned on, and fall apart when the energy input is off. Furthermore, this allows one to guide the formation of intended clusters, as the final structure depends notably on the sequence of steps in which the clusters form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Write Assembly of Graphene/Poly(ε-Caprolactone) Composite Scaffolds and Evaluation of Their Biological Performance Using Mouse Bone Marrow Mesenchymal Stem Cells

Scaffold and mesenchymal stem cell–based cartilage tissue engineering offers a favorable way for the repair and regeneration of injured cartilage. In this study, poly (ε-caprolactone) PCL scaffolds with grid-like structure having periodic lattice was manufactured by robocasting method in the presence of graphene nanoplatelets for cartilage tissue engineering applications. For this purpose, a PCL solution (20 wt%) containing pristine graphene nanopowders in the form of platelets was prepared as printing ink and it was dispensed through a nozzle at room temperature to an ethanol bath at 4 °C. The construction of porous scaffolds was made by a layer-by-layer assembly. Results revealed that graphene additions were not detrimental to deposition process and the structure of the resultant scaffolds. In vitro cell tests indicated that the prepared grid-like graphene/PCL composite scaffolds have good cytocompatibility and non-toxicity for mouse bone marrow mesenchymal stem cells. The stem cells attached and proliferated well on the scaffolds and they also demonstrated a chondrogenic differentiation in the absence of transforming growth factors.

60 APPLIED LIFE SCIENCES↗

Directing Anisotropic Assembly of Metallic Nanoclusters by Exploiting Linear Trio Interactions and Quantum Size Effects: Au Chains on Ag(100) Thin Films

Discovery and understanding of mechanisms for kinetically controlled growth of metal nanoclusters can be enabled by realistic atomistic-level modeling with ab initio kinetics. KMC simulation of such a model for Au deposition on Ag(100) films reveals the formation of single-atom-wide Au chains below 275 K, even though 2D islands are thermodynamically preferred. Chain formation is shown to reflect a combination of strong linear trio attractions guiding assembly and a weak driving force and slow rate of transformation of 1D chains to 2D islands (or sometimes irreversible rounding of adatoms from chain sides to ends). Behavior can also be tuned by quantum size effects: chain formation predominates on 2-monolayer Ag(100) films supported on NiAl(100) at 250 K for low coverages but not on 1- or 3-monolayer films, and longer chains form than on bulk Ag(100). Finally, our predictive kinetic modeling shows the potential for simulation-guided discovery and analysis of novel self-assembly processes.

ab initio periphery diffusion kinetics↗

Laser-Directed Hierarchical Assembly of Liquid Crystal Defects and Control of Optical Phase Singularities

Topological defect lines are ubiquitous and important in a wide variety of fascinating phenomena and theories in many fields ranging from materials science to early-universe cosmology, and to engineering of laser beams. However, they are typically hard to control in a reliable manner. Here we describe facile erasable 'optical drawing' of self-assembled defect clusters in liquid crystals. These quadrupolar defect clusters, stabilized by the medium's chirality and the tendency to form twisted configurations, are shaped into arbitrary two-dimensional patterns, including reconfigurable phase gratings capable of generating and controlling optical phase singularities in laser beams. Our findings bridge the studies of defects in condensed matter physics and optics and may enable applications in data storage, singular optics, displays, electro-optic devices, diffraction gratings, as well as in both optically- and electrically-addressed pixel-free spatial light modulators.

36 MATERIALS SCIENCE↗

Self-assembled photonic-plasmonic nanotweezers for directed self-assembly of hybrid nanostructures

We demonstrate a technique for assembling photonic-plasmonic nanotweezers by optically driving the adsorption of multi-walled carbon nanotubes onto a silicon waveguide. The nanotweezers are then used to trap and release individual polystyrene beads. Additionally, we demonstrate the ability to localize the deposition of metallic nanoparticles to the intersection points between multiple carbon nanotubes with the goal of forming more complex hybrid nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Device-quality, reconfigurable metamaterials from shape-directed nanocrystal assembly

Significance Colloidal nanocrystals with defined sizes and shapes are ideal building blocks for nanofabrication. However, the ability to arbitrarily arrange them on surfaces with control over their orientation remains elusive. Here we report a shallow-template-assisted DNA-mediated assembly strategy to precisely arrange colloidal nanocrystals on surfaces, with single-particle control across submillimeter areas. In addition, the oligonucleotide bonds between the nanocrystals and substrate can be reversibly expanded and contracted enabling postsynthetic tunability of the assembled structures. Using this approach, we synthesized a nanocrystal-based, dynamically tunable metasurface (an anomalous reflector), thereby illustrating the potential for unique device construction via DNA programmable assembly.

59 BASIC BIOLOGICAL SCIENCES↗

Directing Colloidal Assembly and a Metal-Insulator Transition Using a Quench-Disordered Porous Rod Template

Replica and effective-medium theory methods are employed to elucidate how to massively reconfigure a colloidal assembly to achieve globally homogeneous, strongly clustered, and percolated equilibrium states of high electrical conductivity at low physical volume fractions. A key idea is to employ a quench-disordered, large-mesh rigid-rod network as a templating internal field. By exploiting bulk phase separation frustration and the tunable competing processes of colloid adsorption on the low-dimensional network and fluctuation-driven colloid clustering in the pore spaces, two distinct spatial organizations of greatly enhanced particle contacts can be achieved. As a result, a continuous, but very abrupt, transition from an insulating to metallic-like state can be realized via a small change of either the colloid-template or colloid-colloid attraction strength. Furthermore, the approach is generalizable to more complicated template or colloidal architectures.

36 MATERIALS SCIENCE↗

Investigation of Ruthenium Dissolution in Advanced Membrane Electrode Assemblies for Direct Methanol Based Fuel Cell Stacks

Dissolution of ruthenium was observed in the 80-cell stack. Duration testing was performed in single cell MEAs to determine the pathway of cell degradation. EDAX analysis on each of the single cell MEAs has shown that the Johnson Matthey commercial catalyst is stable in DMFC operation for 250 hours, no ruthenium dissolution was observed. Changes in the hydrophobicity of the cathode backing papers was minimum. Electrode polarization analysis revealed that the MEA performance loss is attributed to changes in the cathode catalyst layer. Ruthenium migration does not seem to occur during cell operation but can occur when methanol is absent from the anode compartment, the cathode compartment has access to air, and the cells in the stack are electrically connected to a load (Shunt Currents). The open-to-air cathode stack design allowed for: a) The MEAs to have continual access to oxygen; and b) The stack to sustain shunt currents. Ruthenium dissolution in a DMFC stack can be prevented by: a) Developing an internally manifolded stacks that seal reactant compartments when not in operation; b) Bringing the cell voltages to zero quickly when not in operation; and c) Limiting the total number of cells to 25 in an effort to limit shunt currents.

alternative power sources↗