Search NASA⌕ Search

SEARCH · Search NASA

Results for “double sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Processing and microstructure of Nb-1 percent Zr-0.1 percent C alloy sheet

A systematic study was carried out to evaluate the effects of processing on the microstructure of Nb-1 wt. pct. Zr-0.1 wt. pct. C alloy sheet. The samples were fabricated by cold rolling different sheet bars that were single-, double- or triple-extruded at 1900 K. Heat treatment consisted on one- or two-step annealing of different samples at temperatures ranging from 1350 to 1850 K. The assessment of the effects of processing on microstructure involved characterization of the precipitates including the type, crystal structure, chemistry and distribution within the material as well as an examination of the grain structure. A combination of various analytical and metallographic techniques were used on both the sheet samples and the residue extracted from them. The results show that the relatively coarse orthorhombic Nb2C carbides in the as-rolled samples transformed to rather fine cubic monocarbides of Nb and Zr with varying Zr/Nb ratios upon subsequent heat treatment. The relative amount of the cubic carbides and the Zr/Nb ratio increased with increasing number of extrusions prior to cold rolling. Furthermore, the size and the aspect ratio of the grains appear to be strong functions of the processing history of the material. These and other results obtained will be presented with the emphasis on a possible relationship between processing and microstructure.

Uz, Mehmet↗
NASA NTRS2024

Combining Multi-Faceted Laboratory Studies of 74001-2 and Regional Remote Sensing to Address How Pyroclastic Eruptions Record and Affect the Lunar Volatile Budget

Basaltic magmatism is an efficient process for bringing volatiles from a planetary interior to its surface, with the possibility of generation of a transient lunar atmosphere as abundant volcanic materials de-gassed. However, pyroclastic deposits are locations where trapped gases may be studied [e.g., 2,3]. Volatile-rich pyroclastic deposits occur over a wide surface area of the Moon, indicating that the transport of volatiles and associated pyroclastic materials from the Moon’s mantle to the surface was a wide-spread phenomenon. Numerous studies analyzing remotely sensed data and using empirical modeling have demonstrated that various stages of pyroclastic eruptions significantly influence gas release patterns, morphology, and mineralogy of the deposit. Many observations based on mare basalts and pyroclastic deposits have identified potential histories of gas release [e.g., 2-10] and their influence on volatiles and their stable isotopes [e.g., 11-13]. The best representation of these pyroclastic deposits in the sample collection is core sample 74001-74002 that was collected during the Apollo 17 mission to the Taurus-Littrow Valley (TLV). The double drive tube penetrated a part of a regional-scale pyroclastic deposit and sampled approximately 68.1 cm of that deposit in the TLV. Remnants of this and other pyroclastic depos-its are represented throughout and beyond the TLV [e.g., 14-16]. The stratigraphy of this core has been investigated and defined by numerous studies. The CASA Moon SSERVI research team is conducting a multi-faceted analytical study of this deposit. Data generated from revisiting the stratigraphy of 74001-74002 will be used to place stable isotopes (H, B, Cl, S, Zn, Cu, Rb, Ga, Pb), Ar-Ar and U-Pb chronology, geochemistry, nanometer-scale observations of mineral surfaces, orbital observations, and experiments and modeling within a stratigraphic, eruptive, and geologic context. It is important to place these data into such a context. For example, recent S isotope measurements reported by Dottin et al. show differences within this core that may be related to either changes in source or eruptive process over the course of the eruption (vs. multiple eruptions). A fuller understanding of the stratigraphy is fundamental to resolving this interpretation. This comprehensive approach can only be achieved within the context of a program such as SSERVI. In addition, imaging produced in this project will be incorporated into a citizen scientist program to further identify many of the textural features of this double drive tube.

SSERVI↗
NASA NTRS1990

Measurements of radiated elastic wave energy from dynamic tensile cracks

The role of fracture-velocity, microstructure, and fracture-energy barriers in elastic wave radiation during a dynamic fracture was investigated in experiments in which dynamic tensile cracks of two fracture cofigurations of double cantilever beam geometry were propagating in glass samples. The first, referred to as primary fracture, consisted of fractures of intact glass specimens; the second configuration, referred to as secondary fracture, consisted of a refracture of primary fracture specimens which were rebonded with an intermittent pattern of adhesive to produce variations in fracture surface energy along the crack path. For primary fracture cases, measurable elastic waves were generated in 31 percent of the 16 fracture events observed; the condition for radiation of measurable waves appears to be a local abrupt change in the fracture path direction, such as occurs when the fracture intersects a surface flaw. For secondary fractures, 100 percent of events showed measurable elastic waves; in these fractures, the ratio of radiated elastic wave energy in the measured component to fracture surface energy was 10 times greater than for primary fracture.

Boler, Frances M.↗
NASA NTRS1992

An incremental strategy for calculating consistent discrete CFD sensitivity derivatives

In this preliminary study involving advanced computational fluid dynamic (CFD) codes, an incremental formulation, also known as the 'delta' or 'correction' form, is presented for solving the very large sparse systems of linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations in either the standard or the incremental form, in which case the two are equivalent. Iterative methods appear to be needed for future 3D applications; however, because direct solver methods require much more computer memory than is currently available. Iterative methods for solving these equations in the standard form result in certain difficulties, such as ill-conditioning of the coefficient matrix, which can be overcome when these equations are cast in the incremental form; these and other benefits are discussed. The methodology is successfully implemented and tested in 2D using an upwind, cell-centered, finite volume formulation applied to the thin-layer Navier-Stokes equations. Results are presented for two laminar sample problems: (1) transonic flow through a double-throat nozzle; and (2) flow over an isolated airfoil.

Korivi, Vamshi Mohan↗
NASA NTRS1996

Electromechanical Materials for Cryogenic Use

Electromechanical materials can be used in smart sensor and actuator devices. Yet none performing at low temperatures are available. To meet this need, Pb((MgNi)(1/3)Ta(2/3))03 was synthesized as an electrostrictive ceramic for applications in cryogenic environments. Employing the columbite precursor route, samples with 0% to 100% Ni substitution for Mg were prepared, but only samples with Ni-substitutions less than or equal to 20% yielded primarily the desired perovskite phase. For these compositions the temperature of highest permittivity decreased linearly with increasing Ni content to yield a minimum value of -124 C for 20% Ni-substitution. This composition showed good relaxor dielectric behavior with a maximum relative permittivity of 5890 at 1 kHz. Additionally, in samples with excess MgO, the magnitude of permittivity doubled. In this effort, Pb((MgNi)(1/3)Ta(2/3))03 (PMNiTa) was fabricated to lower its transition temperature by substituting Ni for Mg successively.

Leidinger, Peter↗
NASA NTRS1999

Tissue-engineered human bioartificial muscles expressing a foreign recombinant protein for gene therapy

Murine skeletal muscle cells transduced with foreign genes and tissue engineered in vitro into bioartificial muscles (BAMs) are capable of long-term delivery of soluble growth factors when implanted into syngeneic mice (Vandenburgh et al., 1996b). With the goal of developing a therapeutic cell-based protein delivery system for humans, similar genetic tissue-engineering techniques were designed for human skeletal muscle stem cells. Stem cell myoblasts were isolated, cloned, and expanded in vitro from biopsied healthy adult (mean age, 42 +/- 2 years), and elderly congestive heart failure patient (mean age, 76 +/- 1 years) skeletal muscle. Total cell yield varied widely between biopsies (50 to 672 per 100 mg of tissue, N = 10), but was not significantly different between the two patient groups. Percent myoblasts per biopsy (73 +/- 6%), number of myoblast doublings prior to senescence in vitro (37 +/- 2), and myoblast doubling time (27 +/- 1 hr) were also not significantly different between the two patient groups. Fusion kinetics of the myoblasts were similar for the two groups after 20-22 doublings (74 +/- 2% myoblast fusion) when the biopsy samples had been expanded to 1 to 2 billion muscle cells, a number acceptable for human gene therapy use. The myoblasts from the two groups could be equally transduced ex vivo with replication-deficient retroviral expression vectors to secrete 0.5 to 2 microg of a foreign protein (recombinant human growth hormone, rhGH)/10(6) cells/day, and tissue engineered into human BAMs containing parallel arrays of differentiated, postmitotic myofibers. This work suggests that autologous human skeletal myoblasts from a potential patient population can be isolated, genetically modified to secrete foreign proteins, and tissue engineered into implantable living protein secretory devices for therapeutic use.

Non-NASA Center↗
NASA NTRS2020

GLOBE Observer Data: 2016-2019

This technical report summarizes the GLOBE Observer dataset from 1 April 2016 to 1 December 2019. GLOBE Observer is an ongoing NASA-sponsored international citizen science project that is part of the larger Global Learning & Observations to Benefit the Environment (GLOBE) Program, which has been in operation since 1995. GLOBE Observer has the greatest number of participants and geographic coverage of the citizen science projects in the Earth Science Division at NASA. Participants use the GLOBE Observer mobile app (launched in 2016) to collect atmospheric, hydrologic, and terrestrial observations. The app connects participants to satellite observations from Aqua, Terra, CALIPSO, and MODIS. 38,000 participants have contributed 320,000 observations worldwide, including 1,000,000 georeferenced photographs. It would take an individual more than 13 years to replicate this effort. The GLOBE Observer app has substantially increased the spatial extent and sampling density of GLOBE measurements and more than doubled the number of measurements collected through the GLOBE Program. GLOBE Observer data are publicly available at observer.globe.gov.

Helen M Amos↗
NASA NTRS2020

SN2020bvc: A Broad-line Type Ic Supernova with a Double-peaked Optical Light Curve and a Luminous X-Ray and Radio Counterpart

We present optical, radio, and X-ray observations of SN 2020bvc (=ASASSN-20bs, ZTF 20aalxlis), a nearby (z = 0.0252; d = 114Mpc) broad-line (BL) Type Ic supernova (SN) and the first double-peaked Ic-BL discovered without a gamma-ray burst (GRB) trigger. Our observations show that SN 2020bvc shares several properties in common with the Ic-BL SN 2006aj, which was associated with the low-luminosity gamma-ray burst (LLGRB) 060218. First, the 10 GHz radio luminosity (L(radio) ≈ 10^(37) erg/s) is brighter than ordinary core-collapse SNe but fainter than LLGRB SNe such as SN 1998bw (associated with LLGRB 980425). We model our VLA observations (spanning 13–43 days) as synchrotron emission from a mildly relativistic (v ≳ 0.3c) forward shock. Second, with Swift and Chandra, we detect X-ray emission (L(X) ≈ 10^(41) erg/s) that is not naturally explained as inverse Compton emission or part of the same synchrotron spectrum as the radio emission. Third, high-cadence (6 × per night) data from the Zwicky Transient Facility (ZTF) show a double-peaked optical light curve, the first peak from shock cooling of extended low-mass material (mass Me < 10^(-2) Mꙩ at radius Re > 10^(12) cm) and the second peak from the radioactive decay of 56Ni. SN 2020bvc is the first double-peaked Ic-BL SN discovered without a GRB trigger, so it is noteworthy that it shows X-ray and radio emission similar to LLGRB SNe. For four of the five other nearby (z ≲ 0.05) Ic-BL SNe with ZTF high-cadence data, we rule out a first peak like that seen in SN 2006aj and SN 2020bvc, i.e., that lasts ≈1 day and reaches a peak luminosity M ≈ −18. Follow-up X-ray and radio observations of Ic-BL SNe with well-sampled early optical light curves will establish whether double-peaked optical light curves are indeed predictive of LLGRB-like X-ray and radio emission.

Anna Y. Q. Ho↗
NASA NTRS1995

Two Carrier Analysis of Persistent Photoconductivity in Modulation-Doped Structures

A simultaneous fit of Hall and conductivity data gives quantitative results on the carrier concentration and mobility in both the quantum well and the parallel conduction channel. In this study this method was applied to reveal several new findings on the effect of persistent photoconductivity (PPC) on free-carrier concentrations and mobilities. The increase in the two-dimensional electron-gas (2DEG) concentration is significantly smaller than the apparent one derived from single carrier analysis of the Hall coefficient. In the two types of structures investigated, delta doped and continuously doped barrier, the apparent concentration almost doubles following illumination, while analysis reveals an increase of about 20% in the 2DEG. The effect of PPC on mobility depends on the structure. For the sample with a continuously doped barrier the mobility in the quantum well more than doubles. This increase is attributed to the effective screening of the ionized donors by the large electron concentration in the barrier. In the delta doped barrier sample the mobility is reduced by almost a factor of 2. This decrease is probably caused by strong coupling between the two wells, as is demonstrated by self-consistent analysis.

Schacham, S. E.↗
NASA NTRS1972

Core sample depth relationships - Apollo 14 and 15.

The depth relationships for the Apollo 14 and 15 core tubes and the Apollo 15 drill core are presented, as determined from laboratory simulation studies. Sample at a depth of 40 cm in the Apollo 14 double core tube (virtually the same as the Apollo 12 tubes) represents material from a depth of approximately 58 cm in the lunar surface. The new design of the Apollo 15 core tube results in much less sample disturbance and the depth relationship is practically one-to-one, with sample recovery approaching 100%. The depth relationship for the drill core is also probably close to one-to-one, and its recovery ratio was also 100%.

Carrier, W. D., III↗
NASA NTRS1989

Resonance line transfer calculations by doubling thin layers. I - Comparison with other techniques. II - The use of the R-parallel redistribution function

A versatile and efficient technique for the solution of the resonance line scattering problem with frequency redistribution in planetary atmospheres is introduced. Similar to the doubling approach commonly used in monochromatic scattering problems, the technique has been extended to include the frequency dependence of the radiation field. Methods for solving problems with external or internal sources and coupled spectral lines are presented, along with comparison of some sample calculations with results from Monte Carlo and Feautrier techniques. The doubling technique has also been applied to the solution of resonance line scattering problems where the R-parallel redistribution function is appropriate, both neglecting and including polarization as developed by Yelle and Wallace (1989). With the constraint that the atmosphere is illuminated from the zenith, the only difficulty of consequence is that of performing precise frequency integrations over the line profiles. With that problem solved, it is no longer necessary to use the Monte Carlo method to solve this class of problem.

Yelle, Roger V.↗
NASA NTRS2015

Advances in Astromaterials Curation: Supporting Future Sample Return Missions

NASA's Astromaterials, curated at the Johnson Space Center in Houston, are the most extensive, best-documented, and leastcontaminated extraterrestrial samples that are provided to the worldwide research community. These samples include lunar samples from the Apollo missions, meteorites collected over nearly 40 years of expeditions to Antarctica (providing samples of dozens of asteroid bodies, the Moon, and Mars), Genesis solar wind samples, cosmic dust collected by NASA's high altitude airplanes, Comet Wild 2 and interstellar dust samples from the Stardust mission, and asteroid samples from JAXA's Hayabusa mission. A full account of NASA's curation efforts for these collections is provided by Allen, et al [1]. On average, we annually allocate about 1500 individual samples from NASA's astromaterials collections to hundreds of researchers from around the world, including graduate students and post-doctoral scientists; our allocation rate has roughly doubled over the past 10 years. The curation protocols developed for the lunar samples returned from the Apollo missions remain relevant and are adapted to new and future missions. Several lessons from the Apollo missions, including the need for early involvement of curation scientists in mission planning [1], have been applied to all subsequent sample return campaigns. From the 2013 National Academy of Sciences report [2]: "Curation is the critical interface between sample return missions and laboratory research. Proper curation has maintained the scientific integrity and utility of the Apollo, Antarctic meteorite, and cosmic dust collections for decades. Each of these collections continues to yield important new science. In the past decade, new state-of-the-art curatorial facilities for the Genesis and Stardust missions were key to the scientific breakthroughs provided by these missions." The results speak for themselves: research on NASA's astromaterials result in hundreds of papers annually, yield fundamental discoveries about the evolution of the solar system (e.g. [3] and references contained therein), and serve the global scientific community as ground truth for current and planned missions such as NASA's Dawn mission to Vesta and Ceres, and the future OSIRIS REx mission to asteroid Bennu [1,3]

Evans, C. A.↗
NASA NTRS2011

Processes to Open the Container and the Sample Catcher of the Hayabusa Returned Capsule in the Planetary Material Sample Curation Facility of JAXA

Japanese spacecraft Hayabusa, which returned from near-Earth-asteroid Itokawa, successfully returned its reentry capsule to the Earth, the Woomera Prohibited Area in Australia in Jun 13th, 2010, as detailed in another paper [1]. The capsule introduced into the Planetary Material Sample Curation Facility in the Sagamihara campus of JAXA in the early morning of June 18th. Hereafter, we describe a series of processes for the returned capsule and the container to recover gas and materials in there. A transportation box of the recovered capsule was cleaned up on its outer surface beforehand and introduced into the class 10,000 clean room of the facility. Then, the capsule was extracted from the box and its plastic bag was opened and checked and photographed the outer surface of the capsule. The capsule was composed of the container, a backside ablator, a side ablator, an electronic box and a supporting frame. The container consists of an outer lid, an inner lid, a frame for latches, a container and a sample catcher, which is composed of room A and B and a rotational cylinder. After the first check, the capsule was packed in a plastic bag with N2 again, and transferred to the Chofu campus in JAXA, where the X-ray CT instrument is situated. The first X-ray CT analysis was performed on the whole returned capsule for confirming the conditions of latches and O-ring seal of the container. The analysis showed that the latches of the container should have worked normally, and that the double Orings of the container seemed to be sealed its sample catcher with no problem. After the first X-ray CT, the capsule was sent back to Sagamihara and introduced in the clean room to exclude the electronic box and the side ablator from the container by hand tools. Then the container with the backside ablator was set firmly to special jigs to fix the lid of container tightly to the container and set to a milling machine. The backside ablator was drilled by the machine to expose heads of bolts, which combined the ablator to the outer lid of the container, and after the drilling had been finished, all the bolts were unscrewed and the backside ablator was removed from the container. Then, the container was sent to the Chofu X-ray facility again to examine in detail by a micro X-ray CT instrument in order to reconfirm that the condition of the latches of the lid of container was normal and that its double O-ring seemed to have been sealed after the last X-ray CT analysis.

Fujimura, A.↗
NASA NTRSDate not supplied

Summary of Apollo Next Generation Sample Analysis (ANGSA) and Insights for Artemis Preliminary Examination Activities

Analyses of Apollo samples have provided fundamental insights into the origin and history of the Earth-Moon system and the solar system broadly. With great foresight, a subset of samples from Apollo were left unprocessed so that they could be studied by future generations with their modern technology. To prepare for the return of samples from the Moon by the Artemis Program, NASA initiated the Apollo Next Generation Sample Analysis Program (ANGSA) to analyze a subset of the previously unprocessed Apollo samples. The ANGSA consortium consisted of 9 original teams funded by NASA that combined into a single science team referred to as the ANGSA Science Team. ANGSA was designed to function like the sample analysis phase of a sample return mission with a goal to investigate the lower portion of a double drive tube previously sealed on the lunar surface (73001), the upper portion of that drive tube that had remained unopened (73002), and a variety of Apollo 17 samples that had remained stored at -20 ºC for approximately 50 years.

Francis M. McCubbin↗
NASA NTRS1972

Investigations of lunar materials

The investigations were directed at determining the radiation history and surface chronology of lunar materials using the etched particle track technique. The major lunar materials studied are the igneous rocks and double core from Apollo 12, the breccia and soil samples from Apollo 14, and the core samples from Luna 16. In the course of this work two new and potentially important observations were made: (1) Cosmic ray-induced spallation-recoil tracks were identified. The density of such tracks, when compared with the density of tracks induced by a known flux of accelerator protons, yields the time of exposure of a sample within the top meter or two of moon's surface. (2) Natural, fine scale plastic deformation was found to have fragmented pre-existing charged particle tracks, allowing the dating of the mechanical event causing the deformation.

Comstock, G. M.↗
NASA NTRS1987

Nucleogenic noble gas components in the Cape York iron meteorite

The paper reports data on neutron capture products of the secondary cosmic ray component, the inferred proton and neutron fluences, and the identification of double beta decay of Se-82 in heavily shielded samples of the Cape York iron meteorite. One purpose of this study is to develop a new chronometer for cosmic ray exposure, based on the nuclides I-129 (16 My half-life) and Xe-129 from low energy cosmic ray reactions on Te. The abundance ratio of these two nuclides permits the determination of an (effective) exposure age of 93 + or - 16 My, which represents the first exposure age datum of Cape York. The very small concentrations of spallogenic Ar-38 = 6.5 x 10 to the -10th cu cm STP/g in the metal and troilite (per g Fe) document the heavily shielded locations of the sample. An excess of Xe-129 in the troilite is shown to be entirely due to the decay of cosmic-ray-produced I-129. On the other hand, an inclusion in the troilite reveals the presence of Xe-129 from extinct I-129 and documents its about 4.5 Gy formation age. Mono-isotopic excess of Kr-82 is identified as due to beta-beta-decay of Se-82 with an inferred half-life of 1.0 x 10 to the 20th y. This represents the first beta-beta-decay product observed in a meteorite.

Murty, S. V. S.↗
NASA NTRS1990

A design algorithm using Z-plane closed loop pole placement

It is argued that the design of a single input single output (SISO) control system is simplified if the designer has direct control over the closed loop poles. A space-laser-communications design example utilizing a two-transform algorithm that constructs a generic discrete compensator is presented. The plant in the example has an anti-aliasing filter, a double integrator, a torquer time constant, and a sample-and-hold as continuous elements, and a discrete proportional plus integral module. This fifth-order system is representative of many instrument pointing control systems. Poles resulting from the compensator are placed near the origin of the Z-plane so that the response is dominated by the closed loop poles from the plant. Root locus, time response, and frequency response data are given. Normalization by the sample interval is used to provide a dimensionless example.

Gatlin, James A.↗
NASA NTRS1993

Composition and Maturity of Apollo 16 Regolith Core 60013/14

Samples from every half-centimeter dissection interval of double drive tube 60013/14 (sections 60013 and 60014) were analyzed by magnetic techniques for Fe concentration and surface maturity parameter I(sub s)/ Fe(O), and by neutron activation for concentrations of 25 lithophile and siderophile elements. Core 60013/14 is one of three regolith cores taken in a triangular array 40-50 m apart on the Cayley plains during Apollo 16 mission to the Moon. The core can be divided into three zones based both on I(sub s)/FeO and composition. Unit A (0-44 cm depth) is compositionally similar to other soils from the surface of the central region of the site and is mature throughout, although maturity decreases with depth. Unit B (44-59 cm) is submature and compositionally more feldspathic than Unit A. Regions of lowest maturity in Unit B are characterized by lower Sm/Sc ratios than any soil obtained from the Cayley plains as a result of some unidentified lithologic component with low surface maturity. The component is probably some type of mafic anorthosite that does not occur in such high abundance in any of the other returned soils. Unit C (59-62 cm) is more mature than Unit B and compositionally equivalent to an 87: 13 mixture of soil such as that from Unit A and plagioclase such as found in ferroan anorthosite. Similar soils, but containing greater abundances of anorthosite (plagioclase), are found at depth in the other two cores of the array. These units of immature to submature soil enriched to varying degrees (compared to the mature surface soil) in ferroan anorthosite consisting of approx. 99% plagioclase are the only compositionally distinct subsurface similarities among the three cores. Each of the cores contains other units that are compositionally dissimilar to any soil unit in the other two cores. These compositionally distinct units probably derive from local subsurface blocks deposited by the event(s) that formed the Cayley plains. The ferroan anorthosite with approx. 99% plagioclase, however, must represent some subsurface lithology that is significant on the scale of tens of meters. The compositional uniformity of the surface soil (0-10 cm depth) over distances of kilometers reflects the large-scale uniformity of the plains deposits; the fine- structure reflects small-scale nonuniformity and the inefficiency of the impact-mixing process at depths as shallow as even one meter.

Korotev, Randy T.↗