Search NASA⌕ Search

SEARCH · Search NASA

Results for “economic efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Some practical considerations for economical back contact formation on high efficiency solar cells

The back contact can detract from solar cell performance in a number of ways: high recombination, barrier, photovoltaic, minority carrier collection, resistance. These effects may act in a nonuniform fashion over the cell area, and complicate the analysis of photovoltaic performance aimed at a better understanding of the effects of device geometry and material and/or processing parameters. The back contact is tested by reproducing it on both sides of a substrate. The objective is to find a back contact which performs well as a back contact, can be applied cheaply to large area solar cells, fits well into a practical process sequence, does not introduce structural damage or undesirable impurities into the silicon substrate, is compatible with an effective front contact technology, permits low temperature solder contacting, adheres well to silicon, and is reliable.

Lesk, I. A.↗
NASA NTRS1989

Improving transient analysis technology for aircraft structures

Aircraft dynamic analyses are demanding of computer simulation capabilities. The modeling complexities of semi-monocoque construction, irregular geometry, high-performance materials, and high-accuracy analysis are present. At issue are the safety of the passengers and the integrity of the structure for a wide variety of flight-operating and emergency conditions. The technology which supports engineering of aircraft structures using computer simulation is examined. Available computer support is briefly described and improvement of accuracy and efficiency are recommended. Improved accuracy of simulation will lead to a more economical structure. Improved efficiency will result in lowering development time and expense.

Melosh, R. J.↗
NASA NTRS1978

Technical and Economic Evaluation of Advanced Air Cargo Systems

The current air cargo environment and the relevance of advanced technology aircraft in enhancing the efficiency of the 1990 air cargo system are discussed. NASA preliminary design studies are shown to indicate significant potential gains in aircraft efficiency and operational economics for future freighter concepts. Required research and technology elements are outlined to develop a better base for evaluating advanced design concepts. Current studies of the market operation are reviewed which will develop design criteria for a future dedicated cargo transport. Design features desirable in an all-freighter design are reviewed. NASA-sponsored studies of large, distributed-load freighters are reviewed and these designs are compared to current wide-body aircraft. These concepts vary in gross takeoff weight from 0.5 Gg (one million lbs.) to 1.5 Gg (three million lbs.) and are found to exhibit economic advantages over conventional design concepts.

Whitehead, A. H., Jr.↗
NASA NTRS1986

ECUT (Energy Conversion and Utilization Technologies Program). Biocatalysis Project

Presented are the FY 1985 accomplishments, activities, and planned research efforts of the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Program. The Project's technical activities were organized as follows: In the Molecular Modeling and Applied Genetics work element, research focused on (1) modeling and simulation studies to establish the physiological basis of high temperature tolerance in a selected enzyme and the catalytic mechanisms of three species of another enzyme, and (2) determining the degree of plasmid amplification and stability of several DNA bacterial strains. In the Bioprocess Engineering work element, research focused on (1) studies of plasmid propagation and the generation of models, (2) developing methods for preparing immobilized biocatalyst beads, and (3) developing an enzyme encapsulation method. In the Process Design and Analysis work element, research focused on (1) further refinement of a test case simulation of the economics and energy efficiency of alternative biocatalyzed production processes, (2) developing a candidate bioprocess to determine the potential for reduced energy consumption and facility/operating costs, and (3) a techno-economic assessment of potential advancements in microbial ammonia production.

Source record↗
NASA NTRS1976

The thermal efficiency and cost of producing hydrogen and other synthetic aircraft fuels from coal

A comparison is made of the cost and thermal efficiency of producing liquid hydrogen, liquid methane and synthetic aviation kerosene from coal. These results are combined with estimates of the cost and energy losses associated with transporting, storing, and transferring the fuels to aircraft. The results of hydrogen-fueled and kerosene-fueled aircraft performance studies are utilized to compare the economic viability and efficiency of coal resource utilization of synthetic aviation fuels.

Witcofski, R. D.↗
NASA NTRS1977

The thermal efficiency and cost of producing hydrogen and other synthetic aircraft fuels from coal

A comparison is made of the cost and thermal efficiency of producing liquid hydrogen, liquid methane and synthetic aviation kerosene from coal. These results are combined with estimates of the cost and energy losses associated with transporting, storing, and transferring the fuels to aircraft. The results of hydrogen-fueled and kerosene-fueled aircraft performance studies are utilized to compare the economic viability and efficiency of coal resource utilization of synthetic aviation fuels.

Witcofski, R. D.↗
NASA NTRSDate not supplied

NASA Aeronautics Sustainable Aviation Overview

We live in challenging but exciting times for aviation as the sector continues to emerge from the unprecedented impact of a global pandemic while addressing its contribution to global warming. This perfect storm provides opportunity and the drivers that can lead to the most substantial changes the aviation sector has seen since the convergence of jet engines and swept wings over 60 years ago. The reality is we are entering the dawn of a new era of sustainable aviation full of opportunities and challenges that must economically address the health and transportation needs of society with unprecedentedly low impact on local, regional, and global environments. Today, commercial aviation physically connects countries across the globe and is an integral, critical part of today’s expanding global economy. Commercial aviation relies almost entirely on subsonic transport aircraft to constantly move people and goods from one place to another across the globe. While an effective means of transportation providing an unmatched combination of payload, speed, and range, future subsonic aircraft must continue to improve to meet efficiency, environmental, and economic goals established around the world to sustain the substantial growth projected in this well-established market. Commercial supersonic transports have come and gone in the global market, but they are on the verge of reemerging. Vertical lift vehicles leveraging breakthroughs in autonomous systems and electrified propulsion are positioned for massive growth in local and regional markets leading to daily flights within metropolitan areas that may exceed that across countries. To succeed, these new aircraft must be sustainable from day 1. NASA Aeronautics has a long history of contributions to aviation, and today it continues to address the challenge of sustainable growth of the traditional air transportation system through the research and development of systems and technologies for future aircraft and airspace operations. Research programs over the last decade have set the stage to demonstrate key technologies offering step-change performance and environmental impact. Through a Sustainable Flight National Partnership, NASA will partner with industry, academia, and other government agencies to demonstrate the most promising technologies during the 2020s to enable revolutionary systems in the early 2030s. In parallel, NASA will explore systems and technologies for further benefits approaching zero environmental impact beyond the 2030s. Similarly, NASA programs are addressing the challenges of emerging markets enabled by vertical take-off/landing and low-boom supersonic cruise. This oral-only presentation will focus on opportunities and challenges in the traditional subsonic transport while touching on emerging vertical lift and supersonic commercial aviation markets. NASA’s recent contributions, ongoing research, and plans for sustainable aviation will be discussed, including airframe, propulsion, and integrated vehicle systems and technologies.

James A. Kenyon↗
NASA NTRS1977

Preliminary design study of advanced multistage axial flow core compressors

A preliminary design study was conducted to identify an advanced core compressor for use in new high-bypass-ratio turbofan engines to be introduced into commercial service in the 1980's. An evaluation of anticipated compressor and related component 1985 state-of-the-art technology was conducted. A parametric screening study covering a large number of compressor designs was conducted to determine the influence of the major compressor design features on efficiency, weight, cost, blade life, aircraft direct operating cost, and fuel usage. The trends observed in the parametric screening study were used to develop three high-efficiency, high-economic-payoff compressor designs. These three compressors were studied in greater detail to better evaluate their aerodynamic and mechanical feasibility.

Wisler, D. C.↗
NASA NTRS1977

Development and validation of purged thermal protection systems for liquid hydrogen fuel tanks of hypersonic vehicles

An economical, lightweight, safe, efficient, reliable, and reusable insulation system was developed for hypersonic cruise vehicle hydrogen fuel tanks. Results indicate that, a nitrogen purged, layered insulation system with nonpermeable closed-cell insulation next to the cryogenic tank and a high service temperature fibrous insulation surrounding it, is potentially an attractive solution to the insulation problem. For the postulated hypersonic flight the average unit weight of the purged insulation system (including insulation, condensate and fuel boil off) is 6.31 kg/sq m (1.29 psf). Limited cyclic tests of large specimens of closed cell polymethacrylimide foam indicate it will withstand the expected thermal cycle.

Helenbrook, R. D.↗
NASA NTRS1980

A study of mass production and installation of small solar thermal electric power systems

Technological constraints, materials availability, production capacity, and manufacturing and installations plans and costs at different production levels are included in a study of concentrating collector industrialization. As cobalt for the engine and receiver is supply limited, alternative lower temperature alloys and higher temperature materials such as ceramics are discussed. Economics and production efficiency favor co-location of cellular and thin glass production for reflectors. Assembly and installation are expensive for small sites and few alternatives exist to apply mass production techniques to lower these costs for the selected design. Stepping motors in the size and quantities required are not commercially available today but could be in the future.

Butterfield, J. F.↗
NASA NTRS1984

Energy-Saving Inverter

Commutation by field-effect transistor allows more efficient operation. High voltage field-effect transistor (FET) controls silicon controlled rectifiers (SCR's). Circuit requires only one capacitor and one inductor in commutation circuit: simpler, more efficient, and more economical than conventional inverters. Adaptable to dc-to-dc converters.

Rippel, W. E.↗
NASA NTRS1985

Research and technology

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safe, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to Space Station and other future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1985 Annual Report. The report contains brief descriptions of research and technology projects in major areas of Kennedy Space Center's disciplinary expertise.

Source record↗
NASA NTRS1985

Application of digital/electric systems to advanced technology aircraft

Potential improvements in weight and performance of the digital/electric airplane of the 1990s are investigated, using data based on the Integrated Digital/Electric Airplane (IDEA) study, a nine-month investigation of integrated digital/electric concepts. A baseline configuration was compared to these IDEA configurations in terms of economic performance, fuel efficiency, and significant system and aircraft configuration characteristics. The 1990 baseline configuration represents a six to eight percent performance improvement over current technology; however, the IDEA airplane shows an additional three percent improvement in fuel burn performance. This improvement is due to a reduction of over 3000 pounds in systems weight alone.

Bailey, A. R.↗
NASA NTRS1986

Research and technology

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation, and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1986 Annual Report.

Source record↗
NASA NTRS1987

A rudimentary database for three-dimensional objects using structural representation

A database which enables users to store and share the description of three-dimensional objects in a research environment is presented. The main objective of the design is to make it a compact structure that holds sufficient information to reconstruct the object. The database design is based on an object representation scheme which is information preserving, reasonably efficient, and yet economical in terms of the storage requirement. The determination of the needed data for the reconstruction process is guided by the belief that it is faster to do simple computations to generate needed data/information for construction than to retrieve everything from memory. Some recent techniques of three-dimensional representation that influenced the design of the database are discussed. The schema for the database and the structural definition used to define an object are given. The user manual for the software developed to create and maintain the contents of the database is included.

Sowers, James P.↗
NASA NTRS1987

Research and technology 1987 annual report of the Kennedy Space Center

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation, and is responsible for implementation of the majority of the projects of this Kennedy Space Center 1987 Annual Report.

Source record↗