SEARCH · Search NASA

Results for “eddying model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1993

High Reynolds number calculations using the dynamic subgrid-scale stress model

The dynamic subgrid-scale eddy viscosity model was used in the large-eddy simulation of the turbulent flow in a plane channel for Reynolds numbers based on friction velocity and channel half-width ranging between 200 and 2000, a range including values significantly higher than in previous simulations. The computed wall stress, mean velocity, and Reynolds stress profiles compare very well with experimental and direct simulation data. Comparison of higher moments is also satisfactory. Although the grid in the near-wall region is fairly coarse, the results are quite accurate: the turbulent kinetic energy peaks at y(+) of about 12, and the near-wall behavior of the resolved stresses is captured accurately. The model coefficient is o(0.001) in the buffer layer and beyond, where the cutoff wave numbers are in the decaying region of the spectra; in the near-wall region, the cutoff wave numbers are nearer the energy-containing range, and the resolved turbulent stresses become a constant fraction of the resolved stresses. This feature is responsible for the correct near-wall behavior of the model coefficient.

Piomelli, Ugo↗

NASA NTRS1982

Effects of free stream turbulence intensity and integral length scale on heat transfer from a circular cylinder in crossflow

A model has been proposed for the momentum eddy diffusivity induced by free stream turbulence intensity and integral length scale. The eddy diffusivity model is applied to a cylinder situated in a uniform crossflow in the presence of free stream turbulence. Numerical solution of the governing momentum and energy equations with the proposed eddy diffusivity model yielded results for the skin friction coefficient and the Nusselt number. The numerical predictions of the present work are compared with experimental data and the agreement between the two is seen to be very good.

Gorla, R. S. R.↗

NASA NTRS1982

Stagnation point heat transfer augmentation due to free stream turbulence

A model has been proposed for the momentum eddy diffusivity induced by free stream turbulence intensity and integral length scale. The eddy diffusivity model is applied to the stagnation point of a cylinder situated in a uniform crossflow in the presence of free stream turbulence. A numerical solution of the governing momentum and energy equations with the proposed eddy diffusivity model yielded results for the skin friction coefficient and the Nusselt number. The numerical predictions of the present work are compared with experimental data and the agreement between the two is seen to be very good.

Gorla, R. S. R.↗

NASA NTRS2021

Improving the Representation of Subtropical Boundary Layer Clouds in the NASA GEOS Model with the Eddy-Diffusivity/Mass-Flux Parameterization

A systematic underestimation of subtropical planetary boundary layer (PBL) stratocu-mulus clouds by the GEOS model has been significantly improved by a new Eddy-Diffusivity/Mass-Flux (EDMF) parameterization. The EDMF parameterization representsthe subgrid-scale transport in the dry and moist parts of the PBL in a unified mannerand it combines an adjusted eddy-diffusivity PBL scheme from GEOS with a stochasticmulti-plume mass-flux model. The new EDMF version of the GEOS model is first com-pared against the CONTROL version in a single-column model (SCM) framework for twobenchmark cases representing subtropical stratocumulus and shallow cumulus clouds, andvalidated against large eddy simulations. Global simulations are performed and comparedagainst observations and reanalysis data. The results show that the EDMF version of theGEOS model produces more realistic subtropical PBL clouds. Noteworthy, the EDMF im-provements first detected in the SCM framework translate into similar improvements of theglobal GEOS model.

Kay Suselj↗

NASA NTRS1989

Numerical solution of a two-dimensional jet in a supersonic crossflow using an upwind relaxation scheme

A numerical scheme for predicting complex two-dimensional viscous flow fields is presented. The algorithm uses Roe's method for defining the inviscid fluxes and a line relaxation scheme to solve the resulting discrete approximation. The effects of turbulence are modelled using an algebraic eddy viscosity model. An adaptive grid scheme is employed to improve the resolution of complex flow field phenomena. The algorithm is applied to the solution of a sonic jet in a supersonic crossflow. Numerical results are compared with experimental data to validate the numerical approach.

Thompson, D. S.↗

NASA NTRS1990

PROTEUS two-dimensional Navier-Stokes computer code, version 1.0. Volume 1: Analysis description

A new computer code was developed to solve the two-dimensional or axisymmetric, Reynolds averaged, unsteady compressible Navier-Stokes equations in strong conservation law form. The thin-layer or Euler equations may also be solved. Turbulence is modeled using an algebraic eddy viscosity model. The objective was to develop a code for aerospace applications that is easy to use and easy to modify. Code readability, modularity, and documentation were emphasized. The equations are written in nonorthogonal body-fitted coordinates, and solved by marching in time using a fully-coupled alternating direction-implicit procedure with generalized first- or second-order time differencing. All terms are linearized using second-order Taylor series. The boundary conditions are treated implicitly, and may be steady, unsteady, or spatially periodic. Simple Cartesian or polar grids may be generated internally by the program. More complex geometries require an externally generated computational coordinate system. The documentation is divided into three volumes. Volume 1 is the Analysis Description, and describes in detail the governing equations, the turbulence model, the linearization of the equations and boundary conditions, the time and space differencing formulas, the ADI solution procedure, and the artificial viscosity models.

Towne, Charles E.↗

NASA NTRS1990

PROTEUS two-dimensional Navier-Stokes computer code, version 1.0. Volume 2: User's guide

A new computer code was developed to solve the two-dimensional or axisymmetric, Reynolds averaged, unsteady compressible Navier-Stokes equations in strong conservation law form. The thin-layer or Euler equations may also be solved. Turbulence is modeled using an algebraic eddy viscosity model. The objective was to develop a code for aerospace applications that is easy to use and easy to modify. Code readability, modularity, and documentation were emphasized. The equations are written in nonorthogonal body-fitted coordinates, and solved by marching in time using a fully-coupled alternating direction-implicit procedure with generalized first- or second-order time differencing. All terms are linearized using second-order Taylor series. The boundary conditions are treated implicitly, and may be steady, unsteady, or spatially periodic. Simple Cartesian or polar grids may be generated internally by the program. More complex geometries require an externally generated computational coordinate system. The documentation is divided into three volumes. Volume 2 is the User's Guide, and describes the program's general features, the input and output, the procedure for setting up initial conditions, the computer resource requirements, the diagnostic messages that may be generated, the job control language used to run the program, and several test cases.

Towne, Charles E.↗

NASA NTRS1990

PROTEUS two-dimensional Navier-Stokes computer code, version 1.0. Volume 3: Programmer's reference

A new computer code was developed to solve the 2-D or axisymmetric, Reynolds-averaged, unsteady compressible Navier-Stokes equations in strong conservation law form. The thin-layer or Euler equations may also be solved. Turbulence is modeled using an algebraic eddy viscosity model. The objective was to develop a code for aerospace applications that is easy to use and easy to modify. Code readability, modularity, and documentation were emphasized. The equations are written in nonorthogonal body-fitted coordinates, and solved by marching in time using a fully-coupled alternating-direction-implicit procedure with generalized first- or second-order time differencing. All terms are linearized using second-order Taylor series. The boundary conditions are treated implicitly, and may be steady, unsteady, or spatially periodic. Simple Cartesian or polar grids may be generated internally by the program. More complex geometries require an externally generated computational coordinate system. The documentation is divided into three volumes. Volume 3 is the Programmer's Reference, and describes the program structure, the FORTRAN variables stored in common blocks, and the details of each subprogram.

Towne, Charles E.↗

NASA NTRS1992

A numerical study of the effects of geometry on the performance of a supersonic combustor

A numerical study is conducted to investigate the effects of two combustor scale parameters, the expansion angle and the length of the constant area combustor section, on the mixing and combustion within a supersonic combustor. This study uses the SPARK 3D Navier-Stokes code. Turbulence is modeled utilizing an algebraic eddy viscosity model and the chemical mechanism is modeled with a 7-reaction, 7-species finite-rate chemistry model. The calculations show that, even at the relatively low flight Mach numbers (5-7) associated with the conditions examined, the chemical constituents are far from equilibrium, and therefore that kinetics effects are important.

Eklund, Dean R.↗

NASA NTRS2004

Meteorology and Wake Vortex Influence on American Airlines FL-587 Accident

The atmospheric environment surrounding the crash of American Airlines Flight 587 is investigated. Examined are evidence for any unusual atmospheric conditions and the potential for encounters with aircraft wake vortices. Computer simulations are carried out with two different vortex prediction models and a Large Eddy Simulation model. Wind models are proposed for studying aircraft and pilot response to the wake vortex encounter.

Proctor, Fred H.↗

NASA NTRS2011

Toward Supersonic Retropropulsion CFD Validation

This paper begins the process of verifying and validating computational fluid dynamics (CFD) codes for supersonic retropropulsive flows. Four CFD codes (DPLR, FUN3D, OVERFLOW, and US3D) are used to perform various numerical and physical modeling studies toward the goal of comparing predictions with a wind tunnel experiment specifically designed to support CFD validation. Numerical studies run the gamut in rigor from code-to-code comparisons to observed order-of-accuracy tests. Results indicate that this complex flowfield, involving time-dependent shocks and vortex shedding, design order of accuracy is not clearly evident. Also explored is the extent of physical modeling necessary to predict the salient flowfield features found in high-speed Schlieren images and surface pressure measurements taken during the validation experiment. Physical modeling studies include geometric items such as wind tunnel wall and sting mount interference, as well as turbulence modeling that ranges from a RANS (Reynolds-Averaged Navier-Stokes) 2-equation model to DES (Detached Eddy Simulation) models. These studies indicate that tunnel wall interference is minimal for the cases investigated; model mounting hardware effects are confined to the aft end of the model; and sparse grid resolution and turbulence modeling can damp or entirely dissipate the unsteadiness of this self-excited flow.

Kleb, Bil↗

NASA NTRS1990

Continuous assimilation of simulated Geosat altimetric sea level into an eddy-resolving numerical ocean model. I - Sea level differences. II - Referenced sea level differences

The optimal interpolation method of Lorenc (1981) was used to conduct continuous assimilation of altimetric sea level differences from the simulated Geosat exact repeat mission (ERM) into a three-layer quasi-geostrophic eddy-resolving numerical ocean box model that simulates the statistics of mesoscale eddy activity in the western North Pacific. Assimilation was conducted continuously as the Geosat tracks appeared in simulated real time/space, with each track repeating every 17 days, but occurring at different times and locations within the 17-day period, as would have occurred in a realistic nowcast situation. This interpolation method was also used to conduct the assimilation of referenced altimetric sea level differences into the same model, performing the referencing of altimetric sea sevel differences by using the simulated sea level. The results of this dynamical interpolation procedure are compared with those of a statistical (i.e., optimum) interpolation procedure.

White, Warren B.↗

NASA NTRS1986

The flowfield structure of the 3-D shock wave - Boundary layer interaction generated by a 20 deg sharp fin at Mach 3

The three-dimensional oblique shock wave-turbulent boundary layer interaction generated by a sharp fin attached to a flat plate is investigated experimentally and theoretically for Mach 3 and Reynolds number 9 x 10 to the 5th using two different models. Both models employ the three-dimensional compressible Navier-Stokes equations in mass-averaged variables; one model utilizes the algebraic turbulent eddy viscosity model of Baldwin and Lomax (1978), while the other model employs the two-equation turbulence model of Jones and Launder (1972) coupled with the wall function model of Viegas and Rubesin (1985). The computed surface pressure, surface streamlines, pitot pressure, and yaw angle profiles are found to be in good agreement with experimental data. The three-dimensional velocity fields computed by both models are in close agreement, although the eddy viscosity profiles differ significantly within the three-dimensional interaction. This result indicates that the overall structure of this three-dimensional sharp fin interaction is insensitive to the turbulence model.

Knight, D. D.↗

NASA NTRS1993

Mars atmospheric dynamics as simulated by the NASA Ames General Circulation Model. II - Transient baroclinic eddies

A large set of experiments performed with the NASA Ames Mars General Circulation Model is analyzed to determine the properties, structure, and dynamics of the simulated transient baroclinic eddies. There is strong transient baroclinic eddy activity in the extratropics of the Northern Hemisphere during the northern autumn, winter, and spring seasons. The eddy activity remains strong for very large dust loadings, though it shifts northward. The eastward propagating eddies are characterized by zonal wavenumbers of 1-4 and periods of about 2-10 days. The properties of the GCM baroclinic eddies in the northern extratropics are compared in detail with analogous properties inferred from Viking Lander meteorology observations.

Barnes, Jeffrey R.↗

NASA NTRS1999

Large Eddy Simulations and Turbulence Modeling for Film Cooling

The objective of the research is to perform Direct Numerical Simulations (DNS) and Large Eddy Simulations (LES) for film cooling process, and to evaluate and improve advanced forms of the two equation turbulence models for turbine blade surface flow analysis. The DNS/LES were used to resolve the large eddies within the flow field near the coolant jet location. The work involved code development and applications of the codes developed to the film cooling problems. Five different codes were developed and utilized to perform this research. This report presented a summary of the development of the codes and their applications to analyze the turbulence properties at locations near coolant injection holes.

Acharya, Sumanta↗

NASA NTRS1997

Annual Research Briefs

This report contains the 1997 annual progress reports of the research fellows and students supported by the Center for Turbulence Research (CTR). Titles include: Invariant modeling in large-eddy simulation of turbulence; Validation of large-eddy simulation in a plain asymmetric diffuser; Progress in large-eddy simulation of trailing-edge turbulence and aeronautics; Resolution requirements in large-eddy simulations of shear flows; A general theory of discrete filtering for LES in complex geometry; On the use of discrete filters for large eddy simulation; Wall models in large eddy simulation of separated flow; Perspectives for ensemble average LES; Anisotropic grid-based formulas for subgrid-scale models; Some modeling requirements for wall models in large eddy simulation; Numerical simulation of 3D turbulent boundary layers using the V2F model; Accurate modeling of impinging jet heat transfer; Application of turbulence models to high-lift airfoils; Advances in structure-based turbulence modeling; Incorporating realistic chemistry into direct numerical simulations of turbulent non-premixed combustion; Effects of small-scale structure on turbulent mixing; Turbulent premixed combustion in the laminar flamelet and the thin reaction zone regime; Large eddy simulation of combustion instabilities in turbulent premixed burners; On the generation of vorticity at a free-surface; Active control of turbulent channel flow; A generalized framework for robust control in fluid mechanics; Combined immersed-boundary/B-spline methods for simulations of flow in complex geometries; and DNS of shock boundary-layer interaction - preliminary results for compression ramp flow.

Spinks, Debra↗

NASA NTRS1979

Numerical simulation of supersonic cone flow at high angle of attack

A conical symmetry assumption is applied to the full Navier-Stokes equations resulting in an equation set containing time and two coordinate directions as independent variables. The set is integrated by use of a finite difference technique for the particular case of sharp cones at incidence. Solutions are obtained and compared with experiment for auxiliary conditions corresponding to both laminar and turbulent flows. Closure for the turbulent flow case is provided by use of a scalor eddy viscosity model based on the mixing length hypothesis. Modifications to the eddy viscosity model were found which led to excellent surface pressure and surface flow direction agreement for turbulent flow at low supersonic Mach numbers. It is apparent that further work on the turbulence model is necessary for agreement at higher supersonic Mach numbers.

Mcrae, D. S.↗

NASA NTRS1994

A 3-D model study of ozone eddy transport in the winter stratosphere

Calculations of the Northward eddy fluxes of stratospheric ozone in a three-dimensional chemical-dynamical model are discussed. It is shown that, although approximately 50 percent of the zonal mean flux is produced by stationary planetary wavenumbers 1 and 2, the wintertime flux due to the chemical eddies is substantially underestimated when a quasi-linear representation is used.

Hsu, N. C.↗