SEARCH · Search NASA

Results for “edge instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Development and application of an optimization procedure for flutter suppression using the aerodynamic energy concept

An optimization procedure is developed based on the responses of a system to continuous gust inputs. The procedure uses control law transfer functions which have been partially determined by using the relaxed aerodynamic energy approach. The optimization procedure yields a flutter suppression system which minimizes control surface activity in a gust environment. The procedure is applied to wing flutter of a drone aircraft to demonstrate a 44 percent increase in the basic wing flutter dynamic pressure. It is shown that a trailing edge control system suppresses the flutter instability over a wide range of subsonic mach numbers and flight altitudes. Results of this study confirm the effectiveness of the relaxed energy approach.

Nissim, E.↗

NASA NTRS1979

Accretion by rotating magnetic neutron stars. II - Radial and vertical structure of the transition zone in disk accretion

The radial and vertical structure of the transition zone at the magnetospheric boundary of an aligned rotating neutron star accreting matter from a Keplerian disk are calculated. The results obtained indicate that: (1) the inner edge of the disk is located where the integrated magnetic stress acting on the disk plasma becomes comparable to the integrated material stress associated with its inward radial drift and orbital motion; (2) the stellar magnetic field threads the disk near its inner edge via the Kelvin-Helmholtz instability, turbulent diffusion, and reconnection, producing a broad transition zone between the unperturbed disk flow and corotating magnetosphere; (3) the transition zone consists of two qualitatively different regions, viz., a broad outer transition zone where the motion is Keplerian and a narrow inner zone, or boundary layer, where the departure from Keplerian motion is substantial; (4) the stellar magnetic field is largely but not entirely screened by currents flowing in the boundary layer; and (5) there are no steady-flow solutions for sufficiently fast stellar rotation.

Ghosh, P.↗

NASA NTRS1988

Cross-B convection of artificially created, negative-ion clouds and plasma depressions - Low-speed flow

A negative-ion, positive-ion plasma produced by the release of an electron attachment chemical into the F region becomes electrically polarized by collisions with neutrals moving across magnetic field lines. The resulting electric field causes E x B drift of the two ion species and the residual electrons. The cross-field flow of the modified ionosphere is computed using a two-dimensional numerical simulation which includes electron attachment and mutual neutralization chemistry, self-consistent electric fields, and three-species plasma transport. The velocity of the plasma is initially in the direction of the neutral wind because the negative-ion cloud is a Pedersen conductivity enhancement. As the positive and negative ions react, the Pedersen conductivity becomes depressed below the ambient value and the velocity of the plasma reverses direction. A plasma hole remains after the positive and negative ions have mutually neutralized. The E x B gradient drift instability produces irregularities on the upwind edge of the hole.

Bernhardt, Paul A.↗

NASA NTRS2022

Linear Disturbance Amplification Over Blunted Flat Plates in High-Speed Flows

Modal and nonmodal instability characteristics of cylindrically blunted flat plates with varying leading edge radii are described for Mach 4 and Mach 6 freestream conditions. The selection of leading edge radii and freestream parameters is informed by experimental conditions. The investigation of this 2D problem provides a slow entropy layer swallowing which allows for an isolated development of perturbations seeded upstream within different wall-normal regions of the flow. At both Mach numbers, a decrease in modal instability amplification was seen as the leading edge radius was increased. Nonmodal analysis reveals amplifying perturbations in the boundary layer as well as in the entropy layer. The medium bluntness regime exhibits the strongest amplification of nonmodal disturbances that is nonmonotonic in character. Small amplitude boundary forcing at the plate surface or volumetric forcing at various wall-normal heights was used to account for receptivity effects. While wall forcing effectively induced modal instabilities, only an actuation above the boundary layer captured disturbances that amplify within the entropy layer. The optimal nonmodal theory’s entropy-layer disturbance evolution exhibited outstanding agreement with controlled forcing, including receptivity effects. The evolution of entropy-layer disturbances from the optimal nonmodal theory showed excellent agreement with the results of receptivity to controlled forcing. Therefore, the nonmodal optimal growth analysis may provide a useful as well as efficient technique to identify the complete disturbance spectrum in blunt hypersonic configurations, where both modal and nonmodal disturbances can amplify in the boundary-layer and entropy-layer regions.

Boundary layer transition↗

DOE OSTI2021

Magnetic-Confinement Fusion—Plasma Theory: Tokamak Magnetohydrodynamic Equilibrium and Stability

Magnetohydrodynamics (MHD) provides a useful model to describe the crucial plasma macroscopic equilibrium and stability behaviors in toroidal tokamak devices by considering the plasma as a conducting fluid interacting with a surrounding confining electromagnetic field. MHD is the most basic plasma model, incorporating most large-scale phenomena, including plasma equilibrium and all major instabilities. MHD equations are obtained by taking moments of the Boltzmann equations for different plasma species. They provide a set of comprehensive physics constrains to compute and optimize the equilibrium plasma shape and pressure and current profiles that are critical to its stability and performance. In the ideal case, the equations have special properties that lead to efficient numerical calculation schemes, the most important of which is the ideal MHD energy principle for linear stability against small departures from equilibrium. In a tokamak plasma, equilibrium pressure is mostly destabilizing for MHD modes, whereas equilibrium current is also often a major driving force. Plasma resistivity creates new freedom for a MHD instability to grow, but there are also cases where the plasma resistivity plays a stabilizing role. Equilibrium toroidal flow and/or flow shear can affect MHD instabilities. Principal MHD instabilities include the internal kink mode, sawtooth, fishbone, external kink, resistive wall mode, resistive interchange, tearing and neoclassical tearing modes (NTMs), locked modes, toroidal Alfven eigenmodes (TAEs), and edge localized modes (ELMs). Fast-growing MHD instabilities can lead to an abrupt plasma disruption and termination that can potentially damage the device plasma facing components (PFCs) and in-vessel structures. Furthermore, an important MHD application is to develop robust techniques to mitigate and control MHD instabilities.

Dispersive pellet injection↗

DOE OSTI2023

A first principles analysis of potential-dependent structural evolution of active sites in Fe-N-C catalysts

Fe-N-C (iron–nitrogen–carbon) electrocatalysts have emerged as potential alternatives to precious metal-based materials for the oxygen reduction reaction (ORR). However, the structure of these materials under electrochemical conditions is not well understood, and their poor stability in acidic environments poses a formidable challenge for successful adoption in commercial fuel cells. To provide molecular-level insights into these complex phenomena, we combine periodic density functional theory (DFT) calculations, exhaustive treatment of coadsorption effects for ORR reaction intermediates, including O and OH, and comprehensive analysis of solvation stabilization effects to construct voltage-dependent ab initio thermodynamic phase diagrams that describe the in situ structure of the active sites. These structures are further linked to activity and stability descriptors that can be compared with experimental parameters such as the half-wave potential for ORR and the onset potential for carbon corrosion and CO 2 evolution. The results indicate that pyridinic Fe sites at zigzag carbon edges, as well as other edge sites, exhibit high activity for ORR compared to sites in the bulk. However, edges neighboring the active sites are prone to instability via overoxidation and consequent site loss. The results suggest that it could be beneficial to synthesize Fe-N-C catalysts with small sizes and large perimeter edge lengths to enhance ORR activity, while voltage fluctuations should be limited during fuel cell operation to prevent carbon corrosion of overoxidized edges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2022

Linear Disturbance Amplification Over Blunted Flat Plates in High-Speed Flows

Boundary layer transition↗

DOE OSTI2023

AToM: Advanced Tokamak Modeling Environment

Stability constraints play an important role in integrated modeling. The global plasma stability and macro-instabilities such as internal kink modes, neoclassical tearing modes, and edge localized perturbations limit the plasma performance and can result in large-scale transient events and plasma disruptions. These macro-instabilities can be also beneficial to the plasma performance. For example, the peeling models often lead to the edge localized modes (ELMs). However, the formation of stationary edge harmonic oscillations (EHOs) due to nonlinear interaction of peeling modes can result in a transition to the Quiescent H-mode (QH-mode) without ELMs. The profiles predicted with transport models need to be refined using the MHD stability constraints. This is important especially for transient and nonlinear stages of discharges such as ramp-up access to hybrid and steady state operation, and L- to H-mode transition as well as transition to the QH-mode. Several stability and MHD codes are already included in the OMFIT framework. These codes include BALOO, ELITE, GATO, M3DC1, MARS, and NIMROD. However, the verifications of stability constraints are currently mostly excluded from transport modeling workflows. The only exception is the EPED module which includes the ELITE predictions to limit the pedestal height. Here, we improved the OMFIT workflow to include stability calculations. Including the stability conditions to the integrated modeling workflow improved the robustness of the predictive modeling discharges. Being implemented in the workflow, the stability conditions can be also used for the stability analysis of experimental data. This improved the physics understanding of various discharge scenarios and can be used in experiment planning.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1983

Vortical flow management for improved configuration aerodynamics: Recent experiences

Recent progress in vortex-control applications for alleviating the adverse consequences of three dimensional separation and vortical interactions on slender body/swept wing configurations is reported. Examples include helical separation trip to alleviate the side force due to forebody vortex asymmetry; hinged strakes to avoid vortex breakdown effects; compartmentation of swept leading edge separation to delay the pitch-up instability; under wing vortex trip and vortex trip and vortex flaps for drag reduction at high lift; and an apex-flap trimmer to fully utilize the lift capability of trailing-edge flaps for take off and landing of delta wings. Experimental results on generic wind-tunnel models are presented to illustrate the vortex-management concepts involved and to indicate their potential for enhancing the subsonic aerodynamics of supersonic-cruise type vehicles.

Rao, D. M.↗

NASA NTRS1990

On the instability of hypersonic flow past a flat plate

The instability of hypersonic boundary-layer flows over flat plates is considered. The viscosity of the fluid is taken to be governed by Sutherland's law, which gives a much more accurate representation of the temperature dependence of fluid viscosity at hypersonic speeds than Chapman's approximate linear law; although at lower speeds the temperature variation of the mean state is less pronounced so that the Chapman law can be used with some confidence. Attention is focussed on the so-called (vorticity) mode of instability of the viscous hypersonic boundary layer. This is thought to be the fastest growing inviscid disturbance at hypersonic speeds; it is also believed to have an asymptotically larger growth rate than any viscous or centrifugal instability. As a starting point the instability of the hypersonic boundary layer which exists far downstream from the leading edge of the plate is investigated. In this regime the shock that is attached to the leading edge of the plate plays no role, so that the basic boundary layer is non-interactive. It is shown that the vorticity mode of instability of this flow operates on a significantly different lengthscale than that obtained if a Chapman viscosity law is assumed. In particular, it is found that the growth rate predicted by a linear viscosity law overestimates the size of the growth rate by O(M(exp 2). Next, the development of the vorticity mode as the wavenumber decreases is described, and it is shown that acoustic modes emerge when the wavenumber has decreased from it's O(1) initial value to O(M (exp -3/2). Finally, the inviscid instability of the boundary layer near the leading edge in the interaction zone is discussed and particular attention is focussed on the strong interaction region which occurs sufficiently close to the leading edge. It is found that the vorticity mode in this regime is again unstable, and that it is concentrated in the transition layer at the edge of the boundary layer where the temperature adjusts from its large, O(M(exp 2), value in the viscous boundary layer, to its O(1) free stream value. The existence of the shock indirectly, but significantly, influences the instability problem by modifying the basic flow structure in this layer.

Blackaby, Nicholas↗

DOE OSTI2021

MARS-Q modeling of kink-peeling instabilities in DIII-D QH-mode plasma

In quiescent H-mode (QH-mode) regime, edge harmonic oscillations (EHOs) are believed to provide necessary radial transport to prevent occurrence of large edge localized modes. A systematic modeling study is performed here on the low- n EHOs in a DIII-D QH-mode plasma (Chen et al 2016 Nucl. Fusion 56 076011), by utilizing the MARS-Q code (Liu et al 2013 Phys. Plasmas 20 042503). Both the n = 1 and n = 2 instabilities are found to be strongly localized near the plasma edge, exhibiting the edge-peeling characteristics. The DIII-D resistive wall is found to have minor effects on these instabilities. The plasma resistivity is found to strongly modify the mode growth rate. Assuming the Spitzer model for the plasma resistivity, the computed mode growth rate scales as S sup>-1/3 with S being the Lundquist number. Toroidal flow of the plasma slightly stabilizes these edge localized kink-peeling modes. Drift kinetic effects all have a destabilization effect on these modes. Non-perturbative magneto-hydrodynamic-kinetic hybrid computations find that the drift kinetic effects associated with thermal particle species push the peak location of the eigenmode radially inward but still in the pedestal region. The modeled plasma temperature and density fluctuations in the plasma edge region, as well as the poloidal magnetic field perturbations along both the low and high field sides of the plasma surface, are in good agreement with experimental measurements. Finally, the quasi-linear initial value simulations find a strong non-linear interplay between the kink-peeling instability and the toroidal flow near the plasma edge. The combined effect of the damping of the flow amplitude and change of the edge flow shear is found to be the stabilizing factor for the kink-peeling mode, leading to the mode saturation and thus EHOs.

Physics↗

DOE OSTI2021

Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas

JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1973

An auroral breakup mechanism

A purely growing electrostatic drift instability driven by the electron temperature gradient at the inner edge of the plasma sheet can grow for large enough values of the temperature gradient. The parallel electric field associated with the instability is localized near the magnetic equator. The growth of the drift instability leads to enhanced whistler noise and increased electron pitch angle diffusion. If the current limit is exceeded in the ionosphere while the parallel electric field of the drift instability exists along the field line, rapid electron precipitation (the auroral breakup) can result.

Maggs, J. E.↗

NASA NTRS1984

An Analysis of Wave Interactions in Swept-Wing Flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. Streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. The crossflow/Tollmien-Schlichting wave interaction was modeled as a secondary instability. The effects of suction are included, and different stability criteria are examined. The results are applied to laminar flow control wings characteristic of energy-efficient aircraft designs.

Reed, H. L.↗

DOE OSTI2021

Decoupling Lattice and Magnetic Instabilities in Frustrated CuMnO2

The AMnO 2 delafossites (A = Na, Cu) are model frustrated antiferromagnets, with triangular layers of Mn 3+ spins. At low temperatures (T N = 65 K), a C2/m → P$\bar1$ transition is found in CuMnO 2 , which breaks frustration and establishes magnetic order. In contrast to this clean transition, A = Na only shows short-range distortions at T N . Here, we report a systematic crystallographic, spectroscopic, and theoretical investigation of CuMnO 2 . We show that, even in stoichiometric samples, nonzero anisotropic Cu displacements coexist with magnetic order. Using X-ray/neutron diffraction and Raman scattering, we show that high pressures act to decouple these degrees of freedom. This manifests as an isostuctural phase transition at ~10 GPa, with a reversible collapse of the c-axis. This is shown to be the high-pressure analogue of the c-axis negative thermal expansion seen at ambient pressure. Density functional theory (DFT) simulations confirm that dynamical instabilities of the Cu + cations and edge-shared MnO 6 layers are intertwined at ambient pressure. However, high pressure selectively activates the former, before an eventual predicted reemergence of magnetism at the highest pressures. Our results show that the lattice dynamics and local structure of CuMnO 2 are quantitatively different from nonmagnetic Cu delafossites and raise questions about the role of intrinsic inhomogeneity in frustrated antiferromagnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Editorial for the 28th Workshop on Magnetohydrodynamic (MHD) Stability Control

This special issue contains four papers which were presented at the 28th Workshop on Magnetohydrodymanic (MHD) Stability Control. The workshop was held at Auburn University and on Zoom from 3–5 October 2024. Furthermore, this annual workshop covers the active and passive control of MHD instabilities such as kink, tearing and edge-localized modes in tokamaks, reversed field pinches, spherical tori or other magnetic confinement devices.

Yang, J. [Princeton Plasma Physics Laboratory (PPP↗

NASA NTRS1993

Spatial simulation of boundary layer instability - Effects of surface roughness

The effects of an isolated, two-dimensional roughness element on the spatial development of instability waves in boundary layers are investigated by numerically integrating the two-dimensional, time-dependent, incompressible Navier-Stokes equations, using a finite difference/Chebyshev discretization. It is shown that (high) inviscid frequencies have higher growth rates than Tollmien-Schlichting frequencies, indicating that disturbances growing in the separation zone are controlled by the inviscid instability of the shear layer at the edge of the separation zone.

Danabasoglu, G.↗

NASA NTRS1992

Characterization of dynamic stall phenomenon using two-dimensional unsteady Navier-Stokes equations

Among the new significant aspects of the present work are: (1) the treatment of the far-field boundary; (2) the use of C-grid topology, with the branch-cut singularity treated analytically; (3) evaluation of the effect of the envelope of prevailing initial states, and finally; (4) the ability to employ streakline/pathline 'visualization' to probe the unsteady features prevailing in vortex-dominated flows. The far-field boundary is placed at infinity, using appropriate grid stretching. This contributes to the accuracy of the solutions, but raised a number of important issues which needed to be resolved; this includes determining the equivalent time-dependent circulation for the pitching airfoil. A secondary counter-clockwise vortex erupts from within the boundary layer and immediately pinches off the energetic leading-edge shear layer which then, through hydrodynamic instability, rolls up into the dynamic stall vortex. The streakline/pathline visualization serves to provide information for insight into the physics of the unsteady separated flow.

Ghia, K. N.↗