Search NASA⌕ Search

SEARCH · Search NASA

Results for “effect size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Phase field simulation of grain size effects on the phase coexistence and magnetostrictive behavior near the ferromagnetic morphotropic phase boundary

The grain size effects on the phase coexistence and magnetostrictive response of Tb 1-x Dy x Fe 2 polycrystals near the ferromagnetic morphotropic phase boundary (MPB) are revealed through phase-field modeling. It shows that phase coexistence is a universal phenomenon in polycrystals for both ferromagnetic and ferroelectric MPB and that the range of compositions for phase coexistence increases with decreasing grain sizes. A large, reversible, and anhysteretic magnetostrictive response at low external fields is also found in the fine-grained polycrystals around the ferromagnetic MPB, which offers us a route to developing nanocrystalline magnetostrictive materials.

42 ENGINEERING↗

Specimen size effects on Zr-based bulk metallic glasses investigated by uniaxial compression and spherical nanoindentation

Specimen size effects on the mechanical behavior of Zr-based bulk metallic glasses (BMGs) were investigated by compression and nanoindentation tests. In compression, even at the 1- to 10-mm scale, stable shear band propagation and extensive plastic deformation can be achieved in small (2 mm) specimens, in contrast to large (6.5 mm) specimens, which fail catastrophically after limited plastic deformation. The yield strength is independent of specimen size in this range, and plastic deformation remains highly localized in a few shear bands even in those specimens that exhibit stable shear sliding. The fracture surfaces of small specimens are smooth, without the vein patterns normally observed as characteristic features on the fracture surfaces of BMGs. During spherical nanoindentation, it is found that the upper bound of the maximum shear stress to initiate plasticity (yielding) in a Zr-based BMG is almost constant for indenter radii smaller than {approx}90 {micro}m. However, the lower bound of this maximum shear stress decreases with increasing indenter radius, probably due to the increased probability of finding defects underneath larger indenters.

36 MATERIALS SCIENCE↗

Grain size effect on corrosion behavior of Inconel 625 film against molten MgCl 2 -NaCl-KCl salt

This study evaluated the grain size effect of Inconel 625 film against molten chloride salt. It is found that larger grain size Inconel 625 exhibits better corrosion resistance by reducing Cr depletion. ~ 2 nm surface NiO layer of Inconel 625 is incapable of compensating the negative effects from more initiation corrosion sites. Mo is the least likely leached element and its enrichment occurs in Cr-depleted regions as a result of Mo diffusion. Mg and Cl are two most seen salt elements in all corroded samples, while K and Na only attack Inconel 625 with the smallest grain size.

14 SOLAR ENERGY↗

Finite-size effects of hysteretic dynamics in multilayer graphene on a ferroelectric

The origin and influence of finite-size effects on the nonlinear dynamics of space charge stored by multilayer graphene on a ferroelectric and resistivity of graphene channel were analyzed. In this paper, we develop a self-consistent approach combining the solution of electrostatic problems with the nonlinear Landau-Khalatnikov equations for a ferroelectric. The size-dependent behaviors are governed by the relations between the thicknesses of multilayer graphene, ferroelectric film, and the dielectric layer. The appearance of charge and electroresistance hysteresis loops and their versatility stem from the interplay of polarization reversal dynamics and its incomplete screening in an alternating electric field. These features are mostly determined by the dielectric layer thickness. The derived analytical expressions for electric fields and space-charge-density distribution in a multilayer system enable knowledge-driven design of graphene-on-ferroelectric heterostructures with advanced performance. We further investigate the effects of spatially nonuniform ferroelectric domain structures on the graphene layers’ conductivity and predict its dramatic increase under the transition from multi- to single-domain state in a ferroelectric. Finally, this intriguing effect can open possibilities for the graphene-based sensors and explore the underlying physical mechanisms in the operation of graphene field-effect transistor with ferroelectric gating.

36 MATERIALS SCIENCE↗

Study of Size Effect in Sheet-stringer Panels

An investigation was conducted to determine whether there are significant size effects in compressive strength of large Z-stiffened sheet-stringer panels as compared with geometrically similar smaller models and thus to ascertain whether the prediction of the strength of large panels by model tests is reliable. The specimens studied were manufactured from 7075-T6 aluminum alloy and included four representative types of panel designs, with full- and one-quarter-scale panels of each type.

LOADS AND STRESSES, STRUCTURAL - COMPRESSION↗

Modeling Study of Reduced Tubing Size Effects on Flow in Depleted Reservoir Natural Gas Storage Wells

This report explores the effects of tubing size reductions on natural gas flow from representative depleted reservoir underground storage wells and fields using basic models for coupled reservoir and pipe flow. This work was motivated by interest at the U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration, in evaluating the effects of tubing and packer as a potential safety upgrade to implement double-barrier systems to existing underground natural gas storage wells. Reservoir and well flow models were developed from widely accepted industry equations, verified against a commercial process simulator model, and validated against field data. The study utilized U.S. operator survey data to provide context and assure that modeling parameters including aver age deliverability rates for wells and fields, operating pressures, well depths, and storage capacities were all carefully considered to keep the modeling relevant to the known range of U.S. operations. The models generally found that wells and fields with inherently low deliverability were relatively insensitive to reductions in tubing diameter, primarily because the hydraulics in those cases were controlled by reservoir properties. For the high-producing wells and fields, the models found that reducing tubing diameter could produce significant reductions in deliverability, both at the field- and well-level. When put into context with occurrence data regarding average deliverability of fields and wells, it appears that most wells and most fields across the U.S. would experience deliverability reductions on the low end of what was simulated here, generally below 20%. For fields with moderate to high deliverability, reductions were generally larger, and could reach as high as 60% for the highest-producing wells and fields.

03 NATURAL GAS↗

Systematic study of finite-size effects in quantum Monte Carlo calculations of real metallic systems

We present a systematic and comprehensive study of finite-size effects in diffusion quantum Monte Carlo calculations of metals. Several previously introduced schemes for correcting finite-size errors are compared for accuracy and efficiency, and practical improvements are introduced. In particular, we test a simple but efficient method of finite-size correction based on an accurate combination of twist averaging and density functional theory. Our diffusion quantum Monte Carlo results for lithium and aluminum, as examples of metallic systems, demonstrate excellent agreement between all of the approaches considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size effect on multiferroic TbMn{sub 2}O{sub 5} nanorods

The effect of the size of TbMn{sub 2}O{sub 5} on their magnetoelectric properties is studied using a field emission transmission electron microscope, ac magnetic susceptibility, relative dielectric constant, specific heat capacity, and x-ray diffraction at various temperatures. A bulk sample and nanorods with two axial lengths, 〈L{sub C}〉, are investigated. Nanorods with 〈L{sub C}〉 of 216 nm and 64 nm crystallize with orthorhombic Pbam symmetry as the bulk material. The axial direction of the two sizes of nanorod is parallel to the c axis of the crystal. No particular radial direction is observed. The critical size for the magnetic ordering of TbMn{sub 2}O{sub 5} is found to be between 〈L{sub C}〉 = 64 nm and 216 nm. Experiments on specific heat capacity verified these results. No similar phenomenon concerning the ferroelectric property is observed. At T = 30 K and 35 K, the 〈L{sub C}〉 = 216 nm sample yields a charge-ordering-like x-ray diffraction peak, which may be associated with the magnetically induced charge ordering superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Pore Size Effect On Spray Cooling Heat Transfer With Porous Tunnels

Previous studies have shown that spray cooling heat flux enhancement may be attained by using enhanced surface structures. However, most enhanced surface spray cooling studies have been limited to extended surfaces relative to the base surface. In this study, experiments were conducted to study the effects of pore size on spray cooling heat flux when using porous tunnels. The porous tunnels where placed sub-surface relative to the top of the heater block. Pores of varying size were machined in the top of the heater block leading into the sub-surface tunnels. Pore diameters varied between 0.25 mm and 1.0 mm. Each copper block had a projected cross-sectional area of 2.0 cm(sup 2). Measurements were also obtained on a heater block with a flat surface for baseline comparison purposes. A 2x2 nozzle array was used with PF-5060 as the working fluid. Thermal performance data was obtained under nominally degassed (chamber pressure of 41.4 kPa) conditions with a bulk fluid temperature of 20.5 "C. Results for both the study show that the highest critical heat flux (CHF) attained was 141 w/cm2 using pores 1.0 mm in diameter. This gave an enhancement of 75% relative to the flat surface case under nominally degassed conditions.

Silk, Eric A.↗

Investigations of initiation spot size effects

As explosive components become smaller, a greater understanding of the effect of initiation spot size on detonation becomes increasingly critical. A series of tests of the effect of initiation spot size will be described. A series of DOI (direct optical initiation) detonators with initiation spots sizes from {approx}50 um to 1000um have been tested to determine laser parameters for threshold firing of low density PETN pressings. Results will be compared with theoretical predictions. Outputs of the initiation source (DOI ablation) have been characterized by a suite of diagnostics including PDV and schlieren imaging. Outputs of complete detonators have been characterized using PDV, streak, and/or schlieren imaging. At present, we have not found the expected change in the threshold energy to spot size relationship for DOI type detonators found in similar earlier for projectiles, slappers and EBWs. New detonators designs (Type C) are currently being tested that will allow the determination of the threshold for spot sizes from 250 um to 105um, where we hope to see change in the threshold vs. spot size relationship. Also, one test of an extremely small diameter spot size (50um) has resulted in preliminary NoGo only results even at energy densities as much as 8 times the energy density of the threshold results presented here. This gives preliminary evidence that 50um spot may be beyond the critical initiation diameter. The constant threshold energy to spot size relationship in the data to date does however still give some insight into the initiation mechanism of DOI detonators. If the DOI initiation mechanism were a 1D mechanism similar to a slapper or a flyer impact, the expected inflection point in the graph would have been between 300um and 500um diameter spot size, within the range of the data presented here. The lack of that inflection point indicates that the DOI initiation mechanism is more likely a 2D mechanism similar to a sphere or rod projectile. We expect to see a three region response as the results from the smaller spot size Type C detonators are completed.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Nanoscale Size Effects on Uranium(VI) Adsorption to Hematite

U(VI) adsorption on aerosol-synthesized hematite particles ranging in size from 12 to 125 nm was studied to explore nanoscale size effects on uranium adsorption. Adsorption on 70 nm aqueous-synthesized particles was also investigated to examine the effect of the synthesis method on reactivity. Equilibrium adsorption was measured over pH 3-11 at two U(VI) loadings. Surface complexation modeling, combined with adjustment of adsorption equilibrium constants to be independent of site density and surface area, provided a quantitative reaction-based framework for evaluating adsorption affinity and capacity. Among the aerosol-synthesized particles, the adsorption affinity decreased as the particle size increased from 12 to 125 nm with similar intermediate affinities for 30 and 50 nm particles. X-ray absorption fine structure spectroscopy measurements suggest that the differences in adsorption affinity and capacity are not the result of substantially different coordination environments of adsorbed U(VI).

54 ENVIRONMENTAL SCIENCES↗

Finite size effects in ferroelectric-semiconductor thin films under open-circuit electric boundary conditions

General features of finite size effects in the ferroelectric-semiconductor film under open-circuit electric boundary conditions are analyzed using Landau-Ginzburg-Devonshire theory and continuum media electrostatics. The temperature dependence of the film critical thickness, spontaneous polarization and depolarization field profiles of the open-circuited films are found to be significantly different from the characteristics of short-circuited ones. In particular, we predict the re-entrant type transition boundary between the mono-domain and poly-domain ferroelectric states due to reduced internal screening efficiency and analyzed possible experimental scenarios created by this mechanism. Performed analysis is relevant for the quantitative description of free-standing ferroelectric films phase diagrams and polar properties. Also our results can be useful for the explanation of the scanning-probe microscopy experiments on free ferroelectric surfaces.

36 MATERIALS SCIENCE↗

Tunable phase structure in NaNbO 3 ceramics by grain-size effect, electric field and heat treatment

Large polarization and strain change during antiferroelectric - ferroelectric phase transition under electric field is the foundation for realizing excellent electrical properties in antiferroelectric ceramics, therefore, the adjustment of antiferroelectricity and clarification of the corresponding mechanism is the foundation for controlling electrical properties. NaNbO3 is the most complex perovskite system showing multiple antiferroelectric phases in a wide temperature range, in which the antiferroelectricity shows obvious instability with changing external and internal conditions, namely the antiferroelectric phase can be adjusted by grain-size effect, electric field and heat treatment. According to the systematical study in terms of the Rietveld refinement of synchrotron XRD and Raman, NaNbO3 exhibits a ferrielectric P21ma structure at room temperature, the ferroelectric component of which increases with decreasing grain size. Two antiferroelectric tetragonal phases exist around Curie temperature TC before the entrance of antiferroelectric R phase zone, while an antiferroelectric monoclinic phase, which can be maintained to room temperature by annealing treatment, acts as the bridge for the depolarization of the poled NaNbO3 with ferroelectric Q phase. A detailed phase diagram mainly focused on the antiferroelectric phase zones of NaNbO3 is plotted, which gives a clear understanding about the polymorphic phase transitions under different conditions. Finally, the results concluded in this work would give a clear guidance for designing high-performance NaNbO3-based lead-free ceramics from the point of structure.

36 MATERIALS SCIENCE↗

First-principles study of quantum size effects in ultrathin Pb-Bi metal alloy films

Using first-principles calculations within density-functional theory (DFT), we investigate the effect of Bi doping in ultrathin Pb(111) films on tuning the quantum size effects (QSEs) of random metal alloy films. Our results show that the QSE of Pb films, as manifested by the oscillatory surface energy, work function, interlayer spacing, and stability with film thickness, are robust against the introduction of random scattering centers doped in the films. Specifically, the stability and the work function of the ultrathin random-alloy films exhibit obvious quantum oscillations up to {approx}20% Bi doping. The periodicity of the beating pattern of QSE oscillations can be tuned via the concentration of the doped Bi atoms through changing the Fermi wave vector. For Pb{sub 0.89}Bi{sub 0.11} alloy films, the role of the substrates of Si(111) and Ge(111) is also studied and the results are consistent with our recent experimental studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ring Size Effects on the Structures of Sandwich Compounds with a Stoichiometry of C 12 H 12 M (M = Ti–Ni)

Ring size effects on geometries and electronic structures were investigated for the (C n H n )M(C m H m ) (n = 4, 5, or 6; m = 8, 7, or 6; m + n = 12; M = Ti–Ni) systems using density functional theory. The lowest-energy C 12 H 12 M structures for the early transition metals titanium, vanadium, and chromium are the experimentally known singlet (η 5 -C 5 H 5 )Ti(η 7 -C 7 H 7 ), doublet (η 5 -C 5 H 5 )V(η 7 -C 7 H 7 ), and singlet (η 6 -C 6 H 6 ) 2 Cr, respectively. The likewise experimentally known singlet (η 6 -C 6 H 6 ) 2 Ti, doublet (η 6 -C 6 H 6 ) 2 V, and singlet (η 5 -C 5 H 5 )Cr(η 7 -C 7 H 7 ) are the secondlowest- energy structures with only a small energy difference between the two vanadium structures. For the later transition metals, dibenzenemetal complexes are the lowest-energy C 12 H 12 M species with two fully bonded hexahapto benzene rings in the lowest-energy manganese and iron derivatives and one hexahapto and one dihapto benzene ring in the lowest-energy cobalt and nickel derivatives. The lowest-energy (C 5 H 5 )M(C 7 H 7 ) structures for the later transition metals iron, cobalt, and nickel have partially bonded nonplanar C 7 H 7 rings with one or two uncomplexed C=C bonds. The (C 4 H 4 )M(C 8 H 8 ) (M = Ti–Ni) structures with the metal sandwiched between four- and eight-membered rings were found to be much higher in energy than their (C 5 H 5 )M(C 7 H 7 ) and (C 6 H 6 ) 2 M isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced oxidation resistance of active nanostructures via dynamic size effect

A major challenge limiting the practical applications of nanomaterials is that the activities of nanostructures (NSs) increase with reduced size, often sacrificing their stability in the chemical environment. Under oxidative conditions, NSs with smaller sizes and higher defect densities are commonly expected to oxidize more easily, since high-concentration defects can facilitate oxidation by enhancing the reactivity with O 2 and providing a fast channel for oxygen incorporation. Here, using FeO NSs as an example, we show to the contrary, that reducing the size of active NSs can drastically increase their oxidation resistance. A maximum oxidation resistance is found for FeO NSs with dimensions below 3.2 nm. Rather than being determined by the structure or electronic properties of active sites, the enhanced oxidation resistance originates from the size-dependent structural dynamics of FeO NSs in O 2 . We find this dynamic size effect to govern the chemical properties of active NSs.

36 MATERIALS SCIENCE↗

Size Effect of Ruthenium Nanoparticles in Catalytic Carbon Monoxide Oxidation

Carbon monoxide oxidation over ruthenium catalysts has shown an unusual catalytic behavior. Here we report a particle size effect on CO oxidation over Ru nanoparticle (NP) catalysts. Uniform Ru NPs with a tunable particle size from 2 to 6 nm were synthesized by a polyol reduction of Ru(acac){sub 3} precursor in the presence of poly(vinylpyrrolidone) stabilizer. The measurement of catalytic activity of CO oxidation over two-dimensional Ru NPs arrays under oxidizing reaction conditions (40 Torr CO and 100 Torr O{sub 2}) showed an activity dependence on the Ru NP size. The CO oxidation activity increases with NP size, and the 6 nm Ru NP catalyst shows 8-fold higher activity than the 2 nm catalysts. The results gained from this study will provide the scientific basis for future design of Ru-based oxidation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗