Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic dissipative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Possible inverse cascade behavior for drift-wave turbulence

The turbulent spectral properties of the dynamical equation of Hasegawa and Mima (1978) governing the evolution of the electrostatic potential in drift-wave turbulence is investigated for two formulations of the problem: (1) as a nondissipative initial value problem, with the potential represented by a truncated Fourier series with large number of terms, and (2) as a dissipative problem with a small viscous dissipation at very short spatial scales, and a long wavelength forcing term at longer wavelengths. It is found that Hasegawa and Mima's prediction for the nondissipative, truncated initial value modal problem is accurate, but substantial differences exist for the forced dissipative case between computer results and analytical predictions based on a wave kinetic equation of Kadomtsev. Much better agreement is found with a simple dual-cascade model based on Kraichnan's generalization of Kolmogorov's cascade arguments.

Fyfe, D.↗

An Investigation of Low Earth Orbit Internal Charging

Low Earth orbit is usually considered a relatively benign environment for internal charging threats due to the low flux of penetrating electrons with energies of a few MeV that are encountered over an orbit. There are configurations, however, where insulators and ungrounded conductors used on the outside of a spacecraft hull may charge when exposed to much lower energy electrons of some 100's keV in a process that is better characterized as internal charging than surface charging. For example, the minimal radiation shielding afforded by thin thermal control materials such as metalized polymer sheets (e.g., aluminized Kapton or Mylar) and multilayer insulation may allow electrons of 100's of keV to charge underlying materials. Yet these same thermal control materials protect the underlying insulators and ungrounded conductors from surface charging currents due to electrons and ions at energies less than a few keV as well as suppress the photoemission, secondary electron, and backscattered electron processes associated with surface charging. We investigate the conditions required for this low Earth orbit "internal charging" to occur and evaluate the environments for which the process may be a threat to spacecraft. First, we describe a simple one-dimensional internal charging model that is used to compute the charge accumulation on materials under thin shielding. Only the electron flux that penetrates exposed surface shielding material is considered and we treat the charge balance in underlying insulation as a parallel plate capacitor accumulating charge from the penetrating electron flux and losing charge due to conduction to a ground plane. Charge dissipation due to conduction can be neglected to consider the effects of charging an ungrounded conductor. In both cases, the potential and electric field is computed as a function of time. An additional charge loss process is introduced due to an electrostatic discharge current when the electric field reaches a prescribed breakdown strength. For simplicity, the amount of charge lost in the discharge is treated as a random percentage of the total charge between a set maximum and minimum amount so a user can consider partial discharges of insulating materials (small loss of charge) or arcing from a conductor (large loss of charge). We apply the model to electron flux measurements from the NOAA-19 spacecraft to demonstrate that charging can reach levels where electrostatic discharges occur and estimate the magnitude of the discharge.

NeergaardParker, Linda↗

Connecting energetics to dynamics in particle growth by oriented attachment using real-time observations

The interplay between crystal and solvent structure, interparticle forces and ensemble particle response dynamics governs the process of crystallization by oriented attachment (OA), yet a quantitative understanding is lacking. Using as a model system ZnO, we combine in situ TEM observations of single particle and ensemble assembly dynamics with simulations of interparticle forces and responses to relate experimentally derived interparticle potentials to the underlying interactions. We show that OA is driven by forces and torques due to a combination of electrostatic ion-solvent correlations and dipolar interactions that act at separations well beyond 5 nm. Importantly, coalignment is achieved before particles reach separations at which strong attractions drive the final jump to contact. The observed barrier to attachment is negligible, while dissipative factors in the quasi-2D confinement of the TEM fluid cell lead to abnormal diffusivities with timescales for rotation much less than for translation, thus enabling OA to dominate.

36 MATERIALS SCIENCE↗

Experimental Study of Microparticle Adhesion and Resuspension with Laser Doppler Vibrometry

Microparticle adhesion and resuspension were studied where Laser Doppler Vibrometry, digital microscopy, and high speed imaging were used to characterize the rate of microparticle resuspension due to mechanical impulse forces. The effects of capillary condensation, particle size, electrostatic adhesion, and van der Waals forces were quantified. The effects of inter-particle cohesive bonds on aggregate-surface adhesion were also observed and quantified. These observations suggest clusters of biological spores may resist resuspension forces due to internal energy dissipation. Experimental methods developed here can be directly applied to trace detection and remediation of chemical, biological, radiological, nuclear, and explosive materials (CBRNE) and are recommended for studying spore resuspension. Semi-empirical relationships presented in this work can also be integrated into existing hazard prediction and assessment capability tools to incorporate the effects of resuspension in computational models. Lastly, this work constitutes a validation data set for discrete element models (DEM) developed at Sandia National Laboratories which could be used to model microparticle adhesion and resuspension.

Hubbard, Joshua Allen↗

Quantified Energy Dissipation Rates in the Terrestrial Bow Shock: Waves and Dissipation - 2

We present the first quantified measure of the energy dissipation rates, due to wave-particle interactions, in the transition region of the Earth's collision-less bow shock using data from the Time History of Events and Macro-Scale Interactions during Sub-Storms spacecraft. Our results show that wave-particle interactions can regulate the global structure and dominate the energy dissipation of collision-less shocks. In every bow shock crossing examined, we observed both low-frequency (less than 10 hertz) and high-frequency (approximately or greater than10 hertz) electromagnetic waves throughout the entire transition region and into the magnetosheath. The low-frequency waves were consistent with magnetosonic-whistler waves. The high-frequency waves were combinations of ion-acoustic waves, electron cyclotron drift instability driven waves, electrostatic solitary waves, and whistler mode waves. The high-frequency waves had the following: (1) peak amplitudes exceeding delta B approximately equal to 10 nanoteslas and delta E approximately equal to 300 millivolts per meter, though more typical values were delta B approximately equal to 0.1-1.0 nanoteslas and delta E approximately equal to 10-50 millivolts per meter (2) Poynting fluxes in excess of 2000 microWm(sup −2) (micro-waves per square meter) (typical values were approximately 1-10 microWm(sup −2) (micro-waves per square meter); (3) resistivities greater than 9000 omega meters; and (4) associated energy dissipation rates greater than 10 microWm(sup −3) (micro-waves per cubic meter). The dissipation rates due to wave-particle interactions exceeded rates necessary to explain the increase in entropy across the shock ramps for approximately 90 percent of the wave burst durations. For approximately 22 percent of these times, the wave-particle interactions needed to only be less than or equal to 0.1 percent efficient to balance the nonlinear wave steepening that produced the shock waves. These results show that wave-particle interactions have the capacity to regulate the global structure and dominate the energy dissipation of collision-less shocks.

Terrestrial bow 2↗

Control of long-distance motion of single molecules on a surface

Spatial control over molecular movement is typically limited because motion at the atomic scale follows stochastic processes. Here, we used scanning tunneling microscopy to bring single molecules into a stable orientation of high translational mobility where they moved along precisely defined tracks. Single dibromoterfluorene molecules moved over large distances of 150 nanometers with extremely high spatial precision of 0.1 angstrom across a silver (111) surface. The electrostatic nature of the effect enabled the selective application of repulsive and attractive forces to send or receive single molecules. The high control allows us to precisely move an individual and specific molecular entity between two separate probes, opening avenues for velocity measurements and thus energy dissipation studies of single molecules in real time during diffusion and collision.

74 ATOMIC AND MOLECULAR PHYSICS↗

Charging characteristics of silica fabrics

The charge dissipation mechanism of silica fabrics and silica fabric/Aluminum composites was studied by means of various sample configurations tested under monoenergetic electron beams at energies between 5 and 20 keV. Grounding of the aluminum rear face of the composite is necessary in order to ensure a good electrostatic performance. The surface potentials are dependent on the flux rate in the range 10 pA -cm(2-) to 3 nA cm(-2); they are the highest at the lowest flux rate. Strong discharges have been evidenced at 20 keV but do not occur under 15 keV electrons. A substantial decrease in the surface potential of the sample is observed every time that an irradiation by low energy electrons ( 2 to 4 keV) is performed simultaneously with the irradiation by medium-energy electrons (10 to 20 keV). Silica fabrics and composites are very sensitive of contamination or contamination-plus-irradiation effects.

Levy, L.↗

First-Principles Models for van der Waals Interactions in Molecules and Materials: Concepts, Theory, and Applications

Noncovalent van der Waals (vdW) or dispersion forces are ubiquitous in nature and influence the structure, stability, dynamics, and function of molecules and materials throughout chemistry, biology, physics, and materials science. These forces are quantum mechanical in origin and arise from electrostatic interactions between fluctuations in the electronic charge density. Here, we explore the conceptual and mathematical ingredients required for an exact treatment of vdW interactions, and present a systematic and unified framework for classifying the current first-principles vdW methods based on the adiabatic-connection fluctuation–dissipation (ACFD) theorem (namely the Rutgers–Chalmers vdW-DF, Vydrov–Van Voorhis (VV), exchange-hole dipole moment (XDM), Tkatchenko–Scheffler (TS), many-body dispersion (MBD), and random-phase approximation (RPA) approaches). Particular attention is paid to the intriguing nature of many-body vdW interactions, whose fundamental relevance has recently been highlighted in several landmark experiments. The performance of these models in predicting binding energetics as well as structural, electronic, and thermodynamic properties is connected with the theoretical concepts and provides a numerical summary of the state-of-the-art in the field. We conclude with a roadmap of the conceptual, methodological, practical, and numerical challenges that remain in obtaining a universally applicable and truly predictive vdW method for realistic molecular systems and materials.

Hermann, Jan↗

Beam-return current systems in solar flares

It is demonstrated that the common assumption made in solar flare beam transport theory that the beam-accompanied return current is purely electrostatically driven is incorrect, and that the return current is both electrostatically and inductively driven, in accordance with Lenz's law, with the inductive effects dominating for times greater than a few plasma periods. In addition, it is shown that a beam can only exist in a solar plasma for a finite time which is much smaller than the inductive return current dissipation time. The importance of accounting for the role of the acceleration mechanism in forming the beam is discussed. In addition, the role of return current driven anomalous resistivity and its subsequent anomalous Joule heating during the flare process is elucidated.

Spicer, D. S.↗

Charge fluctuations from molecular simulations in the constant-potential ensemble

We revisit the statistical mechanics of charge fluctuations in capacitors. In constant-potential classical molecular simulations, the atomic charges of electrode atoms are treated as additional degrees of freedom which evolve in time so as to satisfy the constraint of fixed electrostatic potential for each configuration of the electrolyte. The present work clarifies the role of the overall electroneutrality constraint, as well as the link between the averages computed within the Born–Oppenheimer approximation and that of the full constant-potential ensemble. This allows us in particular to derive a complete fluctuation–dissipation relation for the differential capacitance, that includes a contribution from the charge fluctuations (around the charges satisfying the constant-potential and electroneutrality constraints) also present in the absence of an electrolyte. We provide a simple expression for this contribution from the elements of the inverse of the matrix defining the quadratic form of the fluctuating charges in the energy. We then illustrate numerically the validity of our results, and recover the expected continuum result for an empty capacitor with structureless electrodes at large inter-electrode distances. By considering a variety of liquids between graphite electrodes, we confirm that this contribution to the total differential capacitance is small compared to that induced by the thermal fluctuations of the electrolyte.

74 ATOMIC AND MOLECULAR PHYSICS↗

Wave-particle interaction phenomena associated with shocks in the solar wind

Microscopic wave-particle interaction phenomena must generally affect the evolution of a traveling interplanetary discontinuity such as a collisionless shock, and solar wind plasma instabilities should also be associated with interplanetary acceleration, diffusion, and dissipation. Recent local measurements from diagnostics on widely separated spacecraft illustrate some examples of these interaction phenomena, and two bounding cases are considered in detail here. It is shown that the interplanetary shock of September 14, 1974 (detected on IMP-7, 8, Hawkeye-1, and Pioneer 11) was associated with intense local electrostatic noise and ion acceleration, while the shock of January 6, 1975 (detected on IMP-7 and Helios-1) had no detectable electrostatic turbulence.

Scarf, F. L.↗

Turbulence in solar wind and laboratory plasmas

Recent studies of plasma turbulence based on measurements within solar wind and laboratory plasmas has been discussed. Evidences for the presence of a turbulent energy cascade, using the Yaglom's law for MHD turbulence, has been provided through data from the Ulysses spacecraft. This allows, for the first time, a direct estimate of the turbulent energy transfer rate, which can contribute to the in situ heating of the solar wind. The energy cascade has been evidenced also for ExB electrostatic turbulence in laboratory magnetized plasmas using measurements of intermittent transport (bursty turbulence) at the edge of the RFX-mod reversed field pinch plasma device. Finally the problem of the dispersive region of turbulence in solar wind above the ion-cyclotron frequency, where a spectral break is usually observed, and the problem of dissipation in a collisionless fluid as the solar wind, are briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experiments and Simulations of the Dusty Properties of Hypervelocity Impact Plasmas

Hypervelocity impacts, referring to impacts occurring at several times the speed of sound in the target, result in inertial stresses greatly exceeding the material strength and produce behavior that is not fully understood. These impact phenomena are seen in space through impacts of orbital debris and meteoroids on spacecraft and airless natural bodies but can also be produced in laboratory environments using light-gas guns and electrostatic dust accelerators. When a hypervelocity impact occurs, plasma is generated both from thermal ionization and from pressure ionization, producing a wide range of plasma densities depending on the impactor’s velocity. This plasma is initially formed in the warm dense matter (WDM) regime and governed by high energy density (HED) hydrodynamics before it rapidly expands and dissipates, spanning many orders of magnitude in density and length scale. The plasma can also contain a dust component, which is particularly relevant for the lower-velocity range of hypervelocity impacts with parameters that are particularly relevant to Tokamak plasmas. Therefore, the properties and dynamics of these plasmas cannot be fully characterized without considering dusty plasma effects, which are ubiquitous but poorly understood.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SELF-HEATING OF CORONA BY ELECTROSTATIC FIELDS DRIVEN BY SHEARED FLOWS

A mechanism for self-heating of the solar corona is discussed. It is shown that the free energy available in the form of sheared flows gives rise to unstable electrostatic perturbations which accelerate and heat particles. The electrostatic perturbations can occur through two processes, viz., by a purely growing sheared flow-driven instability and/or by a sheared flow-driven drift wave. These processes can occur throughout the corona and, hence, this self-heating mechanism could be very important for coronal heating. These instabilities can give rise to local perturbed electrostatic potentials {psi}{sub 1} of up to 100 volts within 3 Multiplication-Sign 10{sup -2} to a few seconds time, if the (dimensionless) initial perturbation is assumed to be about 1%, that is, e{psi}{sub 1}/T{sub e} {approx_equal} 10{sup -2}. The wavelengths in the direction perpendicular to the external magnetic field B{sub 0} vary from about 10 m to 1 m in our model. The purely growing instability creates electrostatic fields by sheared flows even if there is no density gradient, whereas a density gradient is crucial for the occurrence of the drift wave instability. The purely growing instability develops a small real frequency as well in the two-ion coronal plasma. In the solar corona, very low frequency (of the order of 1 Hz) drift dissipative waves can also occur due to electron-ion collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

Two-dimensional simulations of the ion/ion acoustic instability and electrostatic shocks

A newly developed 2D electrostatic code with particle ions and Boltzmann electrons is used to investigate the details of the ion/ion acoustic instability and the structure of electrostatic shocks. The simulation results show that, for the parameters relevant to the plasma sheet boundary layer, the saturation mechanism of the ion/ion acoustic instability is ion trapping. It is also shown that the 2D structure of electrostatic shocks is considerably different from that suggested by previous 1D simulations. The main reason for this difference is the presence of shock reflected ions, which through the ion/ion acoustic instability lead to the generation of large amplitude waves in the upstream region propagating obliquely to the shock normal. These waves play an important role in the shock dissipation process.

Karimabadi, H.↗

Parylene-based active micro space radiator with thermal contact switch

Thermal management is crucial for highly functional spacecrafts exposed to large fluctuations of internal heat dissipation and/or thermal boundary conditions. Since thermal radiation is the only means for heat removal, effective control of radiation is required for advanced space missions. In the present study, a MEMS (Micro Electro Mechanical Systems) active radiator using the contact resistance change has been proposed. Unlike previous bulky thermal louvers/shutters, higher fill factor can be accomplished with an array of electrostatically driven micro diaphragms suspended with polymer tethers. With an early prototype developed with parylene MEMS technologies, radiation heat flux enhancement up to 42% has been achieved.

42 ENGINEERING↗

Space Induced Discharge Model to Be Used on Interface Circuit Vulnerability Assessment

Charging can occur in space due to plasma and high energy particles. Charging is especially severe in certain earth orbits such as geostationary orbit, medium earth orbit and highly inclined orbit. A spacecraft that travels to other planets such as Jupiter also encounters high level of charging due to Jupiter’s radiation belt. The major concern for spacecraft operation due to charging is the survival of sensitive electrical circuits. Dielectrics and floating metal can charge up and discharge onto interface circuits. The electrical circuits need to be evaluated for survival from the electrostatic-discharge (ESD) threat. Both ESD induced upset and damage need to be assessed. The interface circuits are often located inside a shielded unit in the spacecraft structure or a shielded vault with sufficient radiation shielding to avoid surface and internal charging. The materials external to the highly shielded area can charge up and discharge onto wires that can directly dissipate the ESD onto the interface circuits. Figure 1 shows a possible discharge mechanism onto the interfacing circuits. If the wire has an external shield or a coaxial line, some or most of the discharge can flow on the shield to chassis ground. There is always coupling from external discharge. If the wire has no shield, the discharge flows onto the interface circuit. Fig. 1 Possible discharge paths onto the interface circuits. The purpose of this article is to address how to model the ESD threat to be used as the discharge source onto the interface circuit based on the electron beam test data. Different models are needed for different impedances associated with the interface circuits. Once those models are derived, one needs to analyze the interface circuit with the corresponding model using an electrical simulation tool. Then, the circuit’s front-end components can be assessed for damage and upset. Upset is highly dependent on the circuit operation and system requirements, and thus it is not addressed any further. Damage of electrical parts is often rated under Human-Body-Model (HBM) ESD. One can utilize this industry-wide available information to assess the damage vulnerability due to space discharges. However, the HBM waveform does not always match the discharge waveform. To estimate the damage vulnerability of the circuit and set margin, one needs to compare the equivalent energy delivered to the victim between a HBM discharge and the results from an ESD source model based on actual discharges. This paper presents such a comparison for a few select cases.

Xie, Julie↗

Electrostatic Evaluation: SCAPE Suit Materials

The surface resistivity tests are performed per the requirements of the ESD Association Standard Test Method ESD STM11.11*. These measurements are taken using a PRS-801 resistance system with an Electro Tech System (ETS) PRF-911 concentric ring resistance probe. The tests require a five pound weight on top of cylindrical electrodes and were conducted at both ambient and low humidity conditions. In order for materials to "pass" resistivity tests the surface of the materials must either be conductive or statically dissipative otherwise the materials "fail" ESD. Volume resistivity tests are also conducted to measure conductivity through the material as opposed to conductivity along the surface. These tests are conducted using the same PRS-801 resistance system with the Electro Tech System PRF-911 concentric ring resistance probe but are performed in accordance with ESD Association Standard Test Method ESD STM11.l2**.

Buhler, Charles↗