Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Cosolvent-tuned interactions in ionic liquids: A vibrational and quantum-chemical study of ethylene glycol ratio effects

Ionic liquids (ILs) are attractive media for CO 2 capture but remain limited by viscosity and cost. Blending ILs with ethylene glycol (EG) is a practical route to mitigate these constraints, yet the molecular origins of cosolvent effects and their dependence on composition are not well resolved. We combine Fourier-transform infrared (FT-IR) spectroscopy with quantum-chemical (DFT) analysis to elucidate how the IL:EG molar ratio modulates intermolecular interactions and electronic structure. Computed vibrational frequencies enable mode assignment and deconvolution of overlapping bands, revealing systematic, ratio-dependent shifts and broadenings in (i) EG O–H stretching, (ii) cation and EG C–H stretchings (imidazolium C2–H, C4–H, C5–H, methyl and ethyl groups, -CH2 of EG), (iii) anion signature modes (e.g., CN motifs), and (iv) EG C–O and C–C stretchings, consistent with the redistribution of hydrogen-bonding networks. Molecular electrostatic potential (MESP) maps quantify attenuation of extreme potential regions with increasing EG, indicating progressive screening of cation–anion electrostatic interactions. Quantum Theory of Atoms in Molecules (QTAIM) identifies emergent bond critical points between EG and the IL ions, while Reduced Density Gradient–Noncovalent Interaction (RDG–NCI) analysis differentiates strong directional hydrogen bonds from dispersive contacts across compositions. Together, these results show that EG fraction controls a switch from predominantly ion–ion to mixed ion–EG coordination, altering local polarity and polarizability that underlie the observed FT-IR trends. The framework provides composition–structure–spectrum relationships that can guide rational selection of IL:EG ratios to balance favorable molecular interactions with practical performance targets in scalable CO 2 capture systems.

DAC↗

Tuning of MEMS Gyroscope using Evolutionary Algorithm and "Switched Drive-Angle" Method

We propose a tuning method for Micro-Electro-Mechanical Systems (MEMS) gyroscopes based on evolutionary computation that has the capacity to efficiently increase the sensitivity of MEMS gyroscopes through tuning and, furthermore, to find the optimally tuned configuration for this state of increased sensitivity. We present the results of an experiment to determine the speed and efficiency of an evolutionary algorithm applied to electrostatic tuning of MEMS micro gyros. The MEMS gyro used in this experiment is a pyrex post resonator gyro (PRG) in a closed-loop control system. A measure of the quality of tuning is given by the difference in resonant frequencies, or frequency split, for the two orthogonal rocking axes. The current implementation of the closed-loop platform is able to measure and attain a relative stability in the sub-millihertz range, leading to a reduction of the frequency split to less than 100 mHz.

Micro-Electro-Mechanical Systems (MEMS)↗

Nonlinear manipulation of surface plasmons on graphene-TMDC Bragg reflectors

In this study, we benefit from the nonlinear optical tunability of the graphene-transition metal dichalcogenide (G-TMDC) heterostructure and the strong confinement of the electromagnetic fields of surface plasmon polaritons (SPPs) on graphene in order to propose a highly tunable nonlinear optical Bragg reflector. Recently, two-dimensional (2D) TMDCs are the subject of intense researches because of their nonlinear optical properties at near infrared wavelengths which are very intriguing for various optical applications. We choose two kinds of 2D-TMDCs, MoSe{sub 2} and WSe{sub 2}, with the strongest second order optical nonlinearity at near infrared range to properly design the periodic variation of the propagating SPP waves on the graphene layer. We utilize theoretical method of quantum electrostatic heterostructure to compute the dielectric function of graphene-TMDCs. Different nonlinearities of two TMDCs lead to noticeable tuning of the full width at half maximum (FWHM) and the central Bragg wavelength of the reflector which let design various optical devices. We design an add/drop filter, a nonlinear switch, and an AND/OR optical logic gate based on our proposed Bragg reflector. Our finite difference time domain numerical and transfer matrix analytical results reveal that by increment of the optical intensity up to 6 MW/cm{sup 2} which is below the pulse damage threshold of graphene, due to the second order nonlinearity, a 10-nm red-shift in central Bragg wavelength is observed and the 20-nm FWHM at linear regime decreases to 1.5 nm. The SPP intensities of 0.8 MW/cm{sup 2} and 1.53 MW/cm{sup 2} fulfill the requirements for AND and OR logical operations with 57 and 66.51 dB extinction ratios, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular-Mechanical Switching at the Nanoparticle-Solvent Interface: Practice and Theory

A range (Au, Pt, Pd) of metal nanoparticles (MNPs) has been prepared and functionalized with (a) redox-active stalks containing tetrathiafulvalene (TTF) units, (b) [2]pseudorotaxanes formed between these stalks and cyclobis(paraquat-p-phenylene) (CBPQT 4+ ) rings, and (c) bistable [2]rotaxane molecules where the dumbbell component contains a 1,5-dioxynaphthalene (DNP) unit, as well as a TTF unit, encircled by a CBPQT4+ ring. It transpires that the molecules present in (a) and (c) and the supermolecules described in (b) retain their switching characteristics, previously observed in solution, when they are immobilized onto MNPs. Moreover, their oxidation potentials depend on the fraction, χ, of the molecules or supermolecules on the surface of the nanoparticles. A variation in χ affects the oxidation potentials of the TTF units to the extent that switching can be subjected to fine tuning as a result. Specifically, increasing χ results in positive shifts (i) in the oxidation potentials of the TTF unit in (a)-(c) and (ii) the reduction potentials of the CBPQT 4+ rings in (c). These shifts can be attributed to an increase in the electrostatic potential surrounding the MNPs. Both the magnitude and the direction of these shifts are reproduced by a model, based on the Poisson-Boltzmann equation coupled with charge-regulating boundary conditions. Furthermore, the kinetics of relaxation from the metastable state coconformation (MSCC) to the ground-state coconformation (GSCC) of the bistable [2]rotaxane molecules also depends on χ, as well as on the nanoparticle diameter. Increasing either of these parameters accelerates the rate of relaxation from the MSCC to the GSCC. This rate is a function of (i) the activation energy for the relaxation process associated with the bistable [2]rotaxane molecules in solution and (ii) the electrostatic potential surrounding the MNPs. The electrostatic potential depends on (i) the diameter of the MNPs, (ii) the amount of the bistable [2]rotaxane molecules on the surface of the MNPs, and (iii) the equilibrium distribution of the CBPQT 4+ rings between the DNP and TTF recognition sites in the GSCC. This electrostatic potential has also been quantified using the Poisson-Boltzmann equation, leading to faithful estimates of the rate constants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

De novo design of tunable, pH-driven conformational changes

The ability of naturally occurring proteins to change conformation in response to environmental changes is critical to biological function. Although there have been advances in the de novo design of stable proteins with a single, deep free-energy minimum, the design of conformational switches remains challenging. We present a general strategy to design pH-responsive protein conformational changes by precisely preorganizing histidine residues in buried hydrogen-bond networks. We design homotrimers and heterodimers that are stable above pH 6.5 but undergo cooperative, large-scale conformational changes when the pH is lowered and electrostatic and steric repulsion builds up as the network histidine residues become protonated. The transition pH and cooperativity can be controlled through the number of histidine-containing networks and the strength of the surrounding hydrophobic interactions. Upon disassembly, the designed proteins disrupt lipid membranes both in vitro and after being endocytosed in mammalian cells. Our results demonstrate that environmentally triggered conformational changes can now be programmed by de novo protein design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrostatic powder spreading for metal powder bed fusion applications

Typical powder bed fusion processes spread each layer of powder by pushing it across the build area with a spreader bar or roller. While simple, these methods require good flowing powder and do not have the ability to place more than one powder type per layer. This naturally limits the ability to incorporate more than one material onto each powder layer in powder bed additive manufacturing processes. Here we demonstrate electrostatic powder spreading, a method to deposit a powder layer without mechanical contact with the previous layers. Electrostatic powder spreading (ESPS) uses an electric field formed between a powder container and a counter electrode to move powder particles from the container to the powder bed. We show that the rate at which powder is deposited can be controlled by adjusting the strength of the electric field. Correspondingly, the deposited layer thickness is controlled by the strength of the electric field and the recoating speed. To demonstrate the feasibility of ESPS for laser powder bed fusion powder spreading, nearly fully dense (> 99.8%) coupons were built in a commercial L-PBF machine using the ESPS setup. Finally, we achieve 2D patterning of a single layer by using an array of electrodes and switching the applied electric field on and off. ESPS represents a method to produce an arbitrary patterned multi-material powder bed without complicated powder removal steps and easy implementation into existing L-PBF machines. Furthermore, ESPS presents an opportunity to build parts with 3D gradients in material properties.

36 MATERIALS SCIENCE↗

Hydrogen and Electric Power Generation from Liquid Microjets: Design Principles for Optimizing Conversion Efficiency

Historically, Liquid water microjets have been successfully employed for both electrical power generation and gaseous hydrogen production, but the demonstrated efficiencies have been low. Here, we employ a combination of a modified Poisson-Boltzmann description, continuum hydrodynamic equations, and microjet electrokinetic experiments to gain detailed insight into the origin of the streaming currents produced in pure water. We identify the contributions to the streaming current from specific ion adsorption at the solid/liquid interface and from long-ranged electrostatic interactions, finding that the portion originating from the latter dominate at charged surfaces. The detailed understanding afforded by theory and the close agreement with experimental results elucidates design principles for optimizing hydrogen production and power generation. Changing the sign of the surface charge density through targeted use of surface coatings via silanization switches the primary charge carrier between hydronium and hydroxide and therefore switches the corresponding production of molecular hydrogen to oxygen at the target electrode. Moreover, hydrophobic surface coatings reduce dissipation due to fluid/solid friction, thereby increasing the conversion efficiency.

08 HYDROGEN↗

Quantum coherent switch utilizing commensurate nanoelectrode and charge density periodicities

A quantum coherent switch having a substrate formed from a density wave (DW) material capable of having a periodic electron density modulation or spin density modulation, a dielectric layer formed onto a surface of the substrate that is orthogonal to an intrinsic wave vector of the DW material; and structure for applying an external spatially periodic electrostatic potential over the dielectric layer.

36 MATERIALS SCIENCE↗

Interfacial charge-induced polarization switching in Al{sub 2}O{sub 3}/Pb(Zr,Ti)O{sub 3} bi-layer

Detailed polarization switching behavior of an Al{sub 2}O{sub 3}/Pb(Zr,Ti)O{sub 3} (AO/PZT) structure is examined by comparing the phenomenological thermodynamic model to the experimental polarization–voltage (P-V) results. Amorphous AO films with various thicknesses (2–10 nm) were deposited on the polycrystalline 150-nm-thick PZT film. The thermodynamic calculation showed that the transition from the ferroelectric-like state to the paraelectric-like state with increasing AO thickness occurs at ∼3 nm thickness. This paraelectric-like state should have exhibited a negative capacitance effect without permanent polarization switching if no other adverse effects are involved. However, experiments showed typical ferroelectric-like hysteresis loops where the coercive voltage increased with the increasing AO thickness, which could be explained by the carrier injection through the thin AO layer and trapping of the carriers at the AO/PZT interface. The fitting of the experimental P-V loops using the thermodynamic model considering the depolarization energy effect showed that trapped charge density was ∼±0.1 Cm{sup −2} and critical electric field at the Pt electrode/AO interface, at which the carrier transport occurs, was ∼±10 MV/cm irrespective of the AO thickness. Energy band model at each electrostatic state along the P-V loop was provided to elucidate correlation between macroscopic polarization and internal charge state of the stacked films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of hot electron inertia on electron-acoustic solitons and double layers

The propagation of arbitrary amplitude electron-acoustic solitons and double layers is investigated in a plasma containing cold positive ions, cool adiabatic and hot isothermal electrons, with the retention of full inertial effects for all species. For analytical tractability, the resulting Sagdeev pseudopotential is expressed in terms of the hot electron density, rather than the electrostatic potential. The existence domains for Mach numbers and hot electron densities clearly show that both rarefactive and compressive solitons can exist. Soliton limitations come from the cool electron sonic point, followed by the hot electron sonic point, until a range of rarefactive double layers occurs. Increasing the relative cool electron density further yields a switch to compressive double layers, which ends when the model assumptions break down. These qualitative results are but little influenced by variations in compositional parameters. A comparison with a Boltzmann distribution for the hot electrons shows that only the cool electron sonic point limit remains, giving higher maximum Mach numbers but similar densities, and a restricted range in relative hot electron density before the model assumptions are exceeded. The Boltzmann distribution can reproduce neither the double layer solutions nor the switch in rarefactive/compressive character or negative/positive polarity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Valence State Driven Site Preference in the Quaternary Compound Ca5MgAgGe5: An Electron-Deficient Phase with Optimized Bonding

The quaternary phase Ca5Mg0.95Ag1.05(1)Ge5 (3) was synthesized by high-temperature solid-state techniques, and its crystal structure was determined by single-crystal diffraction methods in the orthorhombic space group Pnma – Wyckoff sequence c12 with a = 23.1481(4) Å, b = 4.4736(1) Å, c = 11.0128(2) Å, V = 1140.43(4) Å3, Z = 4. The crystal structure can be described as linear intergrowths of slabs cut from the CaGe (CrB-type) and the CaMGe (TiNiSi-type; M = Mg, Ag) structures. Hence, 3 is a hettotype of the hitherto missing n = 3 member of the structure series with the general formula R2+nT2X2+n, previously described with n = 1, 2, and 4. The member with n = 3 was predicted in the space group Cmcm – Wyckoff sequence f5c2. The experimental space group Pnma (in the nonstandard setting Pmcn) corresponds to a klassengleiche symmetry reduction of index two of the predicted space group Cmcm. This transition originates from the switching of one Ge and one Ag position in the TiNiSi-related slab, a process that triggers an uncoupling of each of the five 8f sites in Cmcm into two 4c sites in Pnma. The Mg/Ag site preference was investigated using VASP calculations and revealed a remarkable example of an intermetallic compound for which the electrostatic valency principle is a critical structure-directing force. The compound is deficient by one valence electron according to the Zintl concept, but LMTO electronic structure calculations indicate electronic stabilization and overall bonding optimization in the polyanionic network. Other stability factors beyond the Zintl concept that may account for the electronic stabilization are discussed.

36 MATERIALS SCIENCE↗

Beam steering at the nanosecond time scale with an atomically thin reflector

Techniques to mold the flow of light on subwavelength scales enable fundamentally new optical systems and device applications. The realization of programmable, active optical systems with fast, tunable components is among the outstanding challenges in the field. Here, we experimentally demonstrate a few-pixel beam steering device based on electrostatic gate control of excitons in an atomically thin semiconductor with strong light-matter interactions. By combining the high reflectivity of a MoSe 2 monolayer with a graphene split-gate geometry, we shape the wavefront phase profile to achieve continuously tunable beam deflection with a range of 10°, two-dimensional beam steering, and switching times down to 1.6 nanoseconds. Our approach opens the door for a new class of atomically thin optical systems, such as rapidly switchable beam arrays and quantum metasurfaces operating at their fundamental thickness limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Contribution of the 80s loop of HIV-1 protease to the multidrug-resistance mechanism: crystallographic study of MDR769 HIV-1 protease variants

The flexible flaps and the 80s loops (Pro79-Ile84) of HIV-1 protease are crucial in inhibitor binding. Previously, it was reported that the crystal structure of multidrug-resistant 769 (MDR769) HIV-1 protease shows a wide-open conformation of the flaps owing to conformational rigidity acquired by the accumulation of mutations. In the current study, the effect of mutations on the conformation of the 80s loop of MDR769 HIV-1 protease variants is reported. Alternate conformations of Pro81 (proline switch) with a root-mean-square deviation of 3-4.8 {angstrom} in the C{alpha} atoms of the I10V mutant and a side chain with a 'flipped-out' conformation in the A82F mutant cause distortion in the S1/S1' binding pockets that affects inhibitor binding. The A82S and A82T mutants show local changes in the electrostatics of inhibitor binding owing to the mutation from nonpolar to polar residues. In summary, the crystallographic studies of four variants of MDR769 HIV-1 protease presented in this article provide new insights towards understanding the drug-resistance mechanism as well as a basis for design of future protease inhibitors with enhanced potency.

59 BASIC BIOLOGICAL SCIENCES↗

'Self-consistent' production of ion conics on return current region auroral field lines - A time-dependent, semi-kinetic model

We describe initial results from a time-dependent, semi-kinetic model of plasma outflow incorporating wave-particle interactions along current-carrying auroral field lines. Electrostatic waves are generated by the current driven ion cyclotron instability (CDICI), causing perpendicular velocity diffusion of ions plus electron heating via anomalous resistivity when and where the relative drift between electrons and ions exceeds certain critical velocities. Using the local bulk parameters we calculate these critical velocities, and so are able to self-consistently switch on and off the heating of the various particle species. Due to the dependence of these critical velocities on the bulk parameters of the species the heating effects exhibit quite complex spatial and temporal variations. A wide range of ion distribution functions are observed in these simulations, including conics with energies of a few electron volts and 'ring' distributions. The rings are seen to be a natural result of transverse heating and velocity filter effects and do not require coherent acceleration processes. We also observe the formation of a density depletion in hydrogen and enhanced oxygen densities at high altitudes.

Brown, David G.↗

Resonance tuning due to Coulomb interaction in strong near-field coupled metamaterials

Coulomb's law is one of the most fundamental laws of physics that describes the electrostatic interaction between two like or unlike point charges. Here, we experimentally observe a strong effect of Coulomb interaction in tightly coupled terahertz metamaterials where the split-ring resonator dimers in a unit cell are coupled through their near fields across the capacitive split gaps. Using a simple analytical model, we evaluated the Coulomb parameter that switched its sign from negative to positive values indicating the transition in the nature of Coulomb force from being repulsive to attractive depending upon the near field coupling between the split ring resonators. Apart from showing interesting effects in the strong coupling regime between meta-atoms, Coulomb interaction also allows an additional degree of freedom to achieve frequency tunable dynamic metamaterials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radionuclide measurements by accelerator mass spectrometry at Arizona

Over the past years, Tandem Accelerator Mass Spectrometry (TAMS) has become established as an important method for radionuclide analysis. In the Arizona system the accelerator is operated at a thermal voltage of 1.8MV for C-14 analysis, and 1.6 to 2MV for Be-10. Samples are inserted into a cesium sputter ion source in solid form. Negative ions sputtered from the target are accelerated to about 25kV, and the injection magnet selects ions of a particular mass. Ions of the 3+ charge state, having an energy of about 9MeV are selected by an electrostatic deflector, surviving ions pass through two magnets, where only ions of the desired mass-energy product are selected. The final detector is a combination ionization chamber to measure energy loss (and hence, Z), and a silicon surface-barrier detector which measures residual energy. After counting the trace iosotope for a fixed time, the injected ions are switched to the major isotope used for normalization. These ions are deflected into a Faraday cup after the first high-energy magnet. Repeated measurements of the isotope ratio of both sample and standards results in a measurement of the concentration of the radionuclide. Recent improvements in sample preparation for C-14 make preparation of high-beam current graphite targets directly from CO2 feasible. Except for some measurements of standards and backgrounds for Be-10 measurements to date have been on C-14. Although most results have been in archaeology and quaternary geology, studies have been expanded to include cosmogenic C-14 in meteorites. The data obtained so far tend to confirm the antiquity of Antarctic meteorites from the Allan Hills site. Data on three samples of Yamato meteorites gave terrestrial ages of between about 3 and 22 thousand years.

Jull, A. J. T.↗

Voltage equilibration for reactive atomistic simulations of electrochemical processes

We introduce electrochemical dynamics with implicit degrees of freedom (EChemDID), a model to describe electrochemical driving force in reactive molecular dynamics simulations. The method describes the equilibration of external electrochemical potentials (voltage) within metallic structures and their effect on the self-consistent partial atomic charges used in reactive molecular dynamics. An additional variable assigned to each atom denotes the local potential in its vicinity and we use fictitious, but computationally convenient, dynamics to describe its equilibration within connected metallic structures on-the-fly during the molecular dynamics simulation. This local electrostatic potential is used to dynamically modify the atomic electronegativities used to compute partial atomic changes via charge equilibration. Validation tests show that the method provides an accurate description of the electric fields generated by the applied voltage and the driving force for electrochemical reactions. We demonstrate EChemDID via simulations of the operation of electrochemical metallization cells. The simulations predict the switching of the device between a high-resistance to a low-resistance state as a conductive metallic bridge is formed and resistive currents that can be compared with experimental measurements. In addition to applications in nanoelectronics, EChemDID could be useful to model electrochemical energy conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospray ionizer for mass spectrometry of aerosol particles

A device and method are disclosed to apply ESI-based mass spectroscopy to submicrometer and nanometer scale aerosol particles. Unipolar ionization is utilized to charge the particles in order to collect them electrostatically on the tip of a tungsten rod. Subsequently, the species composing the collected particles are dissolved by making a liquid flow over the tungsten rod. This liquid with dissolved aerosol contents is formed into highly charged droplets, which release unfragmented ions for mass spectroscopy, such as time-of-flight mass spectroscopy. The device is configured to operate in a switching mode, wherein aerosol deposition occurs while solvent delivery is turned off and vice versa.

36 MATERIALS SCIENCE↗