Search NASA⌕ Search

SEARCH · Search NASA

Results for “emissions properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Preliminary estimates of radiosonde thermistor errors

It has been long realized that radiosonde temperature measurements are subject to errors, not the least of which is the effect of long- and short-wave radiation. Methods of adjusting the daytime temperatures to a nighttime equivalent temperature were developed a number of years ago, and are used by some analysis centers. Other than providing consistent observations for analysis this procedure does not provide a true correction. The literature discusses the problem of radiosonde temperature errors but it is not apparent what effort, if any, has been taken to quantify these errors. In order to quantify this radiation error, radiosondes containing multiple thermistors with different coatings were flown at Goddard Space Flight Center/Wallops Flight Facility. The coatings employed had different spectral characteristics and, therefore, different absorption and emissivity properties. Discrimination of the recorded temperatures enabled day and night correction values to be determined for the US standard white-coated rod thermistor. The correction magnitudes are given and a comparison of US measured temperatures before and after correction are compared with temperatures measured with the Vaisala radiosonde. The US and Vaisala radiosonde data are from the recently completed WMO International Radiosonde Intercomparison held at Wallops. The corrections are in the proper direction, day and night, and reduce day-night temperature differences to less than 0,5°C between surface and 30 hPa. The present uncorrected temperatures used with the Viz radiosonde have day-night differences that exceed 1°C at levels below 90 hPa. Additional measurements are planned to confirm these preliminary results and determine the solar elevation angle effect on the corrections. The technique used to obtain the corrections may also be used to recover a true 'absolute' value and might be considered a valuable contribution to the meteorological community for use as a reference instrument.

Temperature measurement↗

The GEISA spectroscopic line parameters data bank in 1984

The 1984 update of the GEISA data bank, containing spectroscopic information on 323,521 lines corresponding to 36 molecules and 79 isotopic species in the spectal range 3 x 10 to the -6th/cm to 17,879/cm, is discussed. The bank compiles parameters describing the radiation absorption or emission properties of gases involved in the atmospheres of the earth and planets. Values of a new exponent which summarized the variation of the collision halfwidth with temperature are given for 10 molecules. Six new molecules, HOCl, N2, CH3Cl, H2O2, H2S, and HCOOH, are included in this edition.

Husson, N.↗

Particle propagation, wave growth and energy dissipation in a flaring flux tube

Wave amplification by downgoing particles in a common flare model is investigated. The flare is assumed to occur at the top of a coronal magnetic flux loop, and results in the heating of plasma in the flaring region. The hot electrons propagate down the legs of the flux tube towards increasing magnetic field. It is simple to demonstrate that the velocity distributions which result in this model are unstable to both beam instabilities and cyclotron maser action. An explanation is presented for the propagation effects on the distribution, and the properties of the resulting amplified waves are explored, concentrating on cyclotron maser action, which has properties (emission in the z mode below the local gyrofrequency) quite different from maser action by other distributions considered in the context of solar flares. The z mode waves will be damped in the coronal plasma surrounding the flaring flux tube and lead to heating there. This process may be important in the overall energy budget of the flare. The downgoing maser is compared with the loss cone maser, which is more likely to produce observable bursts.

White, S. M.↗

Numerical modeling of passive microwave O2 observations over precipitation

Radiometric observations at 118 GHz are compared to a planar-stratified numerical radiative transfer model, in order to study the microwave scattering and emission properties of precipitation cells. Agreement between observed and computed brightness perturbations is shown to be within 10 percent over the radiometrically opaque, mature regions of the cell. Transparent-channel cell top reflectivities of up to 50 percent in the convective core region and 6 percent in the anvil region are determined, using perturbed and nonscattering weighting functions. A parameterized rain cell model is used in a content analysis of 118 GHz precipitation cell spectra. The dominant 118-GHz spectral modes are found to contain useful data on the cell top altitude; they are applicable for detection of transparent anvil regions.

Gasiewski, A. J.↗

Quantifying the FIR interaction enhancement in paired galaxies

The Catalog of Isolated Pairs of Galaxies in the Northern Hemisphere, by Karachentsev (1972), was studied and a well-matched comparison sample taken from the Catalog of Isolated Galaxies, by Karachentseva (1973), in order to quantify the enhanced FIR emission properties of interacting galaxies.

Xu, Cong↗

A millimeter-wave radiometer technique for measuring ice thickness on the surface of the Space Shuttle's external fueltank

The presence of ice on the outside surface of the external tanks of a Space Shuttle can be detrimental to the launch and it is important to detect its presence and measure its thickness. A description is given of the design of a millimeter-wave radiometer system developed for this purpose. The design is based on model calculations and measurements of the emission properties of an external tank panel, performed at 35, 94 and 140 GHz.

Ulaby, F. T.↗

Microwave backscattering and emission model for grass canopies

A two-layer model is developed that treats the grass canopy as a collection of randomly oriented elliptical dielectric discs over a layer of thatch with underlying soil surface. The distorted Born approximation in conjunction with the Peake formulation is used to calculate the backscattering coefficient and the emissivity from the canopy. Two particular features of this model which are unique for grass canopies are the variation of the canopy structure and the presence of the thatch layer. The basic parameters in the model such as the size and orientation of grass blades, dielectric constant of soil and vegetation, and thickness and water content of the thatch layer have been obtained from ground truth data. To interpret the available experimental observations of grasslands, numerical results from both passive and active models at L-band (1.4 GHz) are generated and various scattering and emission properties of the grass canopies are discussed.

Saatchi, Sasan S.↗

MODIS. Volume 2: MODIS level 1 geolocation, characterization and calibration algorithm theoretical basis document, version 1

The EOS Moderate Resolution Imaging Spectrometer (MODIS) is being developed by NASA for flight on the Earth Observing System (EOS) series of satellites, the first of which (EOS-AM-1) is scheduled for launch in 1998. This document describes the algorithms and their theoretical basis for the MODIS Level 1B characterization, calibration, and geolocation algorithms which must produce radiometrically, spectrally, and spatially calibrated data with sufficient accuracy so that Global change research programs can detect minute changes in biogeophysical parameters. The document first describes the geolocation algorithm which determines geodetic latitude, longitude, and elevation of each MODIS pixel and the determination of geometric parameters for each observation (satellite zenith angle, satellite azimuth, range to the satellite, solar zenith angle, and solar azimuth). Next, the utilization of the MODIS onboard calibration sources, which consist of the Spectroradiometric Calibration Assembly (SRCA), Solar Diffuser (SD), Solar Diffuser Stability Monitor (SDSM), and the Blackbody (BB), is treated. Characterization of these sources and integration of measurements into the calibration process is described. Finally, the use of external sources, including the Moon, instrumented sites on the Earth (called vicarious calibration), and unsupervised normalization sites having invariant reflectance and emissive properties is treated. Finally, algorithms for generating utility masks needed for scene-based calibration are discussed. Eight appendices are provided, covering instrument design and additional algorithm details.

Barker, John L.↗

Investigating the 3.3 micron infrared fluorescence from naphthalene following ultraviolet excitation

Polycyclic aromatic hydrocarbon (PAH) type molecules are proposed as the carriers of the unidentified infrared (UIR) bands. Detailed studies of the 3.3 micrometer infrared emission features from naphthalene, the simplest PAH, following ultraviolet laser excitation are used in the interpretation of the 3.29 micrometer (3040 cm(sup -1)) UIR band. A time-resolved Fourier transform spectrometer is used to record the infrared emission spectrum of gas-phase naphthalene subsequent to ultraviolet excitation facilitated by an excimer laser operated at either 193 nm or 248 nm. The emission spectra differ significantly from the absorption spectrum in the same spectral region. Following 193 nm excitation the maximum in the emission profile is red-shifted 45 cm(sup -1) relative to the absorption maximum; a 25 cm(sup -1) red-shift is observed after 248 nm excitation. The red-shifting of the emission spectrum is reduced as collisional and radiative relaxation removes energy from the highly vibrationally excited molecules. Coupling between the various vibrational modes is thought to account for the differences between absorption and emission spectra. Strong visible emission is also observed following ultraviolet excitation. Visible emission may play an important role in the rate of radiative relaxation, which according to the interstellar PAH hypothesis occurs only by the slow emission of infrared photons. Studying the visible emission properties of PAH type molecules may be useful in the interpretation of the DIB's observed in absorption.

Williams, Richard M.↗

IRAS Colors of the Pleiades

We present large scale images of the infrared emission of the region around the Pleiades using the ISSA data product from the IRAS mission. Residual Zodiacal background and a discontinuity in the image due to the scanning strategy of the satellite necessitated special background subtraction methods. The 60/100 color image clearly shows the heating of the ambient interstellar medium by the cluster. The 12/100 and 25/100 images peak on the cluster as expected for exposure of small dust grains to an enhanced UV radiation field; however, the 25/100 color declines to below the average interstellar value at the periphery of the cluster. Potential causes of the color deficit are discussed. A new method of identifying dense molecular material through infrared emission properties is presented. The difference between the 100 micron flux density and the 60 micron flux density scaled by the average interstellar 60/100 color ratio (Delta I(sub 100) is a sensitive diagnostic of material with embedded heating sources (Delta I(sub 100) less than 0) and cold, dense cores (Delta I(sub 100) greater than 0). The dense cores of the Taurus cloud complex as well as Lynds 1457 are clearly identified by this method, while the IR bright but diffuse Pleiades molecular cloud is virtually indistinguishable from the nearby infrared cirrus.

Carey, Sean J.↗

An Effective Secondary Electron Emission Suppression Treatment For Copper MDC

Untreated oxygen-free, high-conductivity (OFHC) copper, commonly used for MDC electrodes, exhibits relatively high secondary electron emission characteristics. This paper describes a specialized ion-bombardment procedure for texturing copper surfaces which sharply reduces the emission properties relative to untreated copper. The resulting surface is a particle-free, robust, uniformly highly-textured all-metal structure. The use of this process requires no modifications to copper machining, brazing, or other MDC normal fabrication procedures. The flight TWT for a planned NASA deep space probe, the Cassini Mission, will incorporate copper MDC electrodes treated with the method described here.

Curren, Arthur N.↗

Observations of Colliding Winds in O-Type Binaries

Stellar winds will collide in a bow shock in close binary systems of O-type stars. The presence of this boundary will truncate the full spatial extent of the two individual winds, and thus the spectral lines formed in the wind will appear differently when viewed from different orientations. Here I discuss the orbital variations of the UV wind lines in a large sample of O-binaries that have been observed with the International Ultraviolet Explorer Satellite (IUE). High density regions in the wind (near the photospheres and bow shock) will produce optical emission lines, and I describe the He emission properties of several systems. The physical characteristics of the component stars can now be better estimated through Doppler tomography, a numerical method to extract the individual primary and secondary spectra.

Gies, Douglas R.↗

The Design and Operation of TMI, a Mechanically-Scanning, Multi-Frequency Microwave Radiometer for the Tropical Rainfall Measurements Mission

The Tropical Rainfall Measurement Mission (TRMM), a joint mission between the U.S. NASA and the Japans NASDA (National Space Development Agency), was successfully launched in November of 1997. On board of the TRMM satellite are two major microwave sensors, a real-aperture radar operating at 13.8 GHz, called the Precipitation Radar (PR), and a microwave radiometer system called TRMM Microwave Imager (TMI). The TMI contains five frequencies, ranging from 10.7 to 85 GHz, is designed to cover a wide dynamic range of rain intensities. The TMI measures the rain from the emission properties while the PR's measurement is based on the scattering of the hydrometeor. The two instruments aboard the same platform provide a complementary and synergistic measurement of precipitation. This paper will focus primarily on the TMI. The advent of microwave sensor technology in recent years, the addition of a new frequency (at 10.7 GHz), as well as the mission design, have enabled the TMI to be a superior instrument for the precipitation measurement. We will provide a description of the instrument together with some of its the design rationales and practical hardware implementation. We will also show the performance of TMI aboard the TRMM and some examples of its data.

Shiue, James C.↗

Percentage Contributions from Atmospheric and Surface Features to Computed Brightness Temperatures

Over the past few years, a few solid precipitation detection and retrieval algorithms have been developed and shown to be applicable for snowing clouds and blizzards. Current precipitating snow retrieval algorithms require the use of millimeter-wave radiometer observations. The millimeter-wave frequencies are especially sensitive to the scattering and emission properties of frozen particles due to the ice particle refractive index. These channels can also be used to discern information about the frozen particles above the melting layer. Passive radiometric channels respond to both the integrated particle mass throughout the volume and field of view, and to the amount, location, and size distribution of the frozen (and liquid) particles with the sensitivity varying for different frequencies and hydrometeor types. This work will show the percentage of the brightness temperature resulting from the liquid hydrometeor, frozen hydrometeor, relative humidity, and surface contributions. The focus will be on precipitating snow events and millimeter-wave frequencies however, other events and frequencies will be included in the analysis.

SkofronickJackson, Gail↗

Prediction of Emission from Wire Polarizing Grids

A simple inhomogeneous circuit model for a grid comprised of wires with circular cross section is derived and compared to measured observations. The proposed approximations are valid in the limit the geometric parameters for the grid are small compared to the wavelength of the incident radiation. Expressions for the emission, reflection, and transmission are provided. The accuracy of this circuit model is compared against full wave numerical simulations as a function of grid filling fraction. For perpendicular illumination of the grid the expressions used in the literature for zero thickness polarizers are recovered. For parallel illumination the influence of the finite wire thickness has a non-negectable influence on the emission properties of a wire grid polarizer is found.

Wollack, Edward↗

Prompt Emission Observations of Swift BAT Bursts

We review the prompt emission properties of Swift BAT gamma-ray bursts (GRBs). We present the global properties of BAT GRBs based on their spectral and temporal characteristics. The BAT T90 and T50 durations peak at 80 and 20 s, respectively. The peak energy (Epeak) of about 60% of BAT GRBs is very likely to be less than 1.00 keV. We also present the BAT characteristics of GRBs with soft spectra, so called Xray flashes (XRFs). We will compare the BAT GRBs and XRFs parameter distribution to the other missions.

Barthelmy, Scott↗

Piezoelectrically Enhanced Photocathodes

Doping of photocathodes with materials that have large piezoelectric coefficients has been proposed as an alternative means of increasing the desired photoemission of electrons. Treating cathode materials to increase emission of electrons is called "activation" in the art. It has been common practice to activate photocathodes by depositing thin layers of suitable metals (usually, cesium). Because cesium is unstable in air, fabrication of cesiated photocathodes and devices that contain them must be performed in sealed tubes under vacuum. It is difficult and costly to perform fabrication processes in enclosed, evacuated spaces. The proposed piezoelectrically enhanced photocathodes would have electron-emission properties similar to those of cesiated photocathodes but would be stable in air, and therefore could be fabricated more easily and at lower cost. Candidate photocathodes include nitrides of elements in column III of the periodic table . especially compounds of the general formula Al(x)Ga(1.x)N (where 0< or = x < or =.1). These compounds have high piezoelectric coefficients and are suitable for obtaining response to ultraviolet light. Fabrication of a photocathode according to the proposal would include inducement of strain in cathode layers during growth of the layers on a substrate. The strain would be induced by exploiting structural mismatches among the various constituent materials of the cathode. Because of the piezoelectric effect in this material, the strain would give rise to strong electric fields that, in turn, would give rise to a high concentration of charge near the surface. Examples of devices in which piezoelectrically enhanced photocathodes could be used include microchannel plates, electron- bombarded charge-coupled devices, image tubes, and night-vision goggles. Piezoelectrically enhanced photocathode materials could also be used in making highly efficient monolithic photodetectors. Highly efficient and stable piezoelectrically enhanced, ultraviolet-sensitive photocathodes and photodetectors could be fabricated by use of novel techniques for growing piezoelectrically enhanced layers, in conjunction with thinning and dopant-selective etching techniques.

Beach, Robert A.↗