Search NASA⌕ Search

SEARCH · Search NASA

Results for “encapsulated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Transparent Conductive Encapsulants for Photoelectrochemical Applications

Utilizing sunlight to directly perform photoelectrochemical reactions is a promising route to renewable, net carbon-neutral fuels. However, a common problem with solar fuel production is semiconductor degradation in aqueous environments. An ideal protection layer should (1) prevent solution from reaching the semiconductor, (2) maintain charge transfer to and from solution, and (3) be transparent to light above the semiconductor band gap. While there have been substantial advances toward layers that meet these requirements, they are not easily adapted to new surfaces or new reactions, which can make protection difficult for newly developed photoabsorbers and (photo)electrochemical reaction pairings. In this work, we demonstrate the use of transparent conductive encapsulants (TCEs) to meet these requirements while also allowing for photoelectrode- and reaction-agnostic adaptability. TCEs are composed of an ethyl-vinyl acetate matrix with embedded conductive metal-coated microspheres that can be laminated to semiconductors. First, the electrochemical behavior of TCE-coated electrodes for the reduction of methyl viologen is characterized, demonstrating through-TCE electrical conduction. Then, photoelectrochemical measurements on TCE-protected semiconductors demonstrate the flexibility of this protection scheme. Finally, long-term photoelectrochemical measurements probe the efficacy of TCEs as protection layers. These findings demonstrate the potential of TCEs as adaptable protection layers in various photoelectrochemical applications.

14 SOLAR ENERGY↗
DOE OSTI2020

Durability of ionomer encapsulants in photovoltaic modules

Ethylene vinyl acetate (EVA) has for decades been the preferred material for photovoltaic (PV) module encapsulation. However, while it is relatively inexpensive and initially adheres well to module components, EVA discolors with age and - as interfacial adhesion degrades - becomes susceptible to delamination, ultimately resulting in reduced module efficiency and shortened service lifetimes. As potential replacements for EVA, ionomer thermoplastic materials cure faster, are more resistant to discoloration and potential induced degradation, and do not evolve corrosive acetic acid, making them compatible with new device materials such as perovskites. Since there is limited information on ionomer durability for PV module applications, a series of field and accelerated laboratory aging studies were conducted to assess ionomer interface stability in the presence of terrestrial environmental stressors. It is shown that adhesion to the glass and cell interfaces of PV modules is inferior to EVA, both before and after aging, rendering ionomers particularly susceptible to delamination after short timeframes. Potential solutions to improve ionomer adhesion are discussed.

14 SOLAR ENERGY↗
DOE OSTI2020

Activation and Assembly of Plasmonic-Magnetic Nanosurfactants for Encapsulation and Triggered Release

Multifunctional surfactants hold great potentials in catalysis, separation, and biomedicine. Highly active plasmonic-magnetic nanosurfactants are developed through a novel acid activation treatment of Au–Fe 3 O 4 dumbbell nanocrystals. The activation step significantly boosts nanosurfactant surface energy and enables the strong adsorption at interfaces, which reduces the interfacial energy one order of magnitude. Mediated through the adsorption at the emulsion interfaces, the nanosurfactants are further constructed into free-standing hierarchical structures, including capsules, inverse capsules, and two-dimensional sheets. The nanosurfactant orientation and assembly structures follow the same packing parameter principles of surfactant molecules. Furthermore, nanosurfactants demonstrate the capability to disperse and encapsulate homogeneous nanoparticles and small molecules without adding any molecular surfactants. The assembled structures are responsive to external magnetic field, and triggered release is achieved using an infrared laser by taking advantage of the enhanced surface plasmon resonance of nanosurfactant assemblies. Finally, solvent and pH changes are also utilized to achieve the cargo release.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Millimeter-Scale Exfoliation of hBN with Tunable Flake Thickness for Scalable Encapsulation

As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. In this report we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices.

2D materials↗
DOE OSTI2025

FTIR analysis of unaged encapsulants

Fourier transform infrared spectroscopy (FITR) analysis (in ATR mode) of unaged encapsulants (EVA, POE, EPE) from a commercial source.

characterization↗
DOE OSTI2020

Encapsulation of Wastes Using Adapted Geopolymer Formulations - 20272

A geopolymer formulation characterized by a low initial viscosity, suitable to immobilise a wide range of waste types such as oils, chemicals and solid waste, is introduced and characterized. The role of the specific surface area of magnesium oxide additions to the reference formulation is presented. Moreover, its capability to encapsulate different volume fractions of oil via the preparation of oil in activator solution emulsions is introduced. Lastly, the effect of oil incorporation on the density, the mechanical strength and the leaching properties of the compositions is presented and discussed. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Encapsulation of Nanoparticle Organic Hybrid Materials within Electrospun Hydrophobic Polymer/Ceramic Fibers for Enhanced CO 2 Capture

Liquid-like nanoparticle organic hybrid materials (NOHMs) consisting of a silica core with ionically grafted branched polyethyleneimine chains (referred to as NIPEI) are encapsulated within submicron-scale polyacrylonitrile (PAN)/polymer-derived-ceramic electrospun fibers. The addition of a room-temperature curable, liquid-phase organopolysilazane (OPSZ) ceramic precursor to the PAN/NOHM solution enhances the internal dispersion of NOHMs and forms a thin ceramic sheath layer on the fiber exterior, shielding the hydrophilic NIPEI to produce near-superhydrophobic non-woven fiber mats with contact angles exceeding 140°. 60:40 loadings of NOHMs to PAN/OPSZ can be reliably achieved with low OPSZ percentages required, and up to 4:1 NOHM:polymer loadings are possible before losing hydrophobicity. These fibers demonstrate up to ≈2 mmol CO 2 g -1 fiber capture capacities in a pure CO 2 atmosphere through the nonwoven fibrous networks and the permeability of the OPSZ shell. In conclusion, the hybrid fibers additionally show enhanced capture kinetics under pure CO 2 and 400 ppm CO 2 conditions, indicating their promising application as a direct air capture platform.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomically Dispersed Nickel(I) on an Alloy‐Encapsulated Nitrogen‐Doped Carbon Nanotube Array for High‐Performance Electrochemical CO 2 Reduction Reaction

Abstract Single‐atom catalysts (SACs) show great promise for electrochemical CO 2 reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the single‐atom electrode greatly limit their performance. Herein, we prepared a nickel single‐atom electrode consisting of isolated, high‐density and low‐valent nickel(I) sites anchored on a self‐standing N‐doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon‐fiber paper. The combination of single‐atom nickel(I) sites and self‐standing array structure gives rise to an excellent electrocatalytic CO 2 reduction performance. The introduction of copper tunes the d‐band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single‐nickel‐atom electrode exhibits a specific current density of −32.87 mA cm −2 and turnover frequency of 1962 h −1 at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.

Zhang, Tianyu↗
DOE OSTI2020

Degradation in photovoltaic encapsulation strength of attachment: Results of the first PVQAT TG5 artificial weathering study

Delamination of the encapsulant in photovoltaic (PV) module technology results in immediate optical loss and may enable subsequent corrosion or mechanical damage. The effects of artificial weathering were not previously known; therefore, an empirical study was performed to survey the factors most affecting adhesion, including the ultraviolet (UV) source (ie, Xe or fluorescent lamp[s]), the optical filters for the lamp, the chamber temperature, and the relative humidity. Natural weathering was also performed at locations, including the following: Golden, Colorado; Miami, Florida; Phoenix, Arizona; QiongHai, China; Riyadh, Saudi Arabia; and Turpan, China. Specimens were constructed using a laminated glass/poly (ethylene-co-vinyl acetate)/glass geometry. The compressive shear test (CST) was used to quantify the mechanical strength of attachment, taken as a proxy for adhesion. The fractography of select specimens (including cross-sectional optical microscopy) was used to verify the failure mode (delamination or decohesion). Additional analysis of the local solar spectrum as well as the specimen temperature was performed to interpret the results of natural weathering. The goals of this study include to identify the most significant stressors, clarify where strong coupling may occur between stressors, and validate accelerated test results relative to natural weathering. The importance of specimen conditioning (for moisture) and hygrometric degradation as well as the effects of UV degradation are identified in this paper.

14 SOLAR ENERGY↗
DOE OSTI2020

Life cycle assessment of novel heat exchanger for dry cooling of power plants based on encapsulated phase change materials

Cooling systems in power plants account for approximately 40% of total freshwater withdrawals in the U.S. Due to dwindling access to freshwater resources worldwide, continued operation of wet cooling systems poses a significant engineering challenge. To reduce water consumption, a novel air-cooled heat exchanger has been developed using encapsulated phase change material (EPCM) for dry cooling of power plants. Compared to traditional finned-tube air-cooled condensers, this novel EPCM heat exchanger improves the heat transfer coefficient and power plant efficiency while reducing the pressure drop and cooling system cost. Life cycle assessment (LCA) and techno-economic analysis (TEA) are used to evaluate the environmental and economic performance of EPCM heat exchangers from cradle-to-grave and to compare them to wet cooling and traditional air-cooled condensers. A thermodynamic model is developed to predict the EPCM heat exchanger performance for plant-scale operations. Equipment and construction costs for heat exchangers are estimated based on design parameters obtained from the thermodynamic model. Both process-LCA and economic-input–output LCA are used to simulate and test the sensitivity of EPCM alternatives with commercial wet and dry cooling technologies. We investigate options for EPCM end-of-life management upon retiring the heat exchanger and construct a process-based LCA model to estimate a greenhouse gas (GHG) emissions credit for recycling the EPCM. The life cycle GHG emission of the novel dry cooling technology is 1.16 kg CO 2 eq. /MWh compared with the 1.1–4.3 kg CO 2 eq. /MWh reported for commercial dry cooling technologies and consumes 9.5 L/MWh e of water for cradle-to-gate life cycle, which is significantly lower than that of wet cooling systems. The TEA shows many advantages of EPCM cooling technology over the state-of-art dry cooling solutions. Overall, the EPCM heat exchanger provides a better alternative compared to existing dry cooling and wet cooling technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Encapsulation of highly viscous CO 2 capture solvents for enhanced capture kinetics: Modeling investigation of mass transfer mechanisms

The encapsulation of highly viscous liquid-like Nanoparticle Organic Hybrid Materials (NOHMs) inside a gas permeable polymer to form SIPs (Solvent Impregnated Polymers) significantly enhanced the CO 2 capture kinetics of NOHMs, leading to a remarkable 50-fold increase in CO 2 flux compared to the neat NOHMs. To understand the mechanism for enhanced CO 2 mass transfer within these hybrid materials, kinetic modeling of CO 2 uptake into SIPs containing polyethylenimine functionalized NOHMs, denoted NPEI-SIP, was conducted. CO 2 mass transfer into NPEI-SIP films was found to conform, both qualitatively and quantitatively, with a diffusion-controlled moving front model. The diffusion-controlled model was also used to simulate CO 2 uptake within a fixed bed containing polydisperse NPEI-SIP particles, and this model accurately predicted experimentally measured breakthrough curves at 25 °C and 50 °C. The 50-fold increase in gas flux was shown to be a consequence of the very large CO 2 permeability within the polymer–solvent composite. Furthermore, the increase in gas flux is also dependent on the diffusion–reaction regime in which the chemical solvent operates, and the largest improvement will occur when immobilizing solvents, such as NOHMs, which operate in the instantaneous-reaction regime. The CO 2 capacity (~3 mol CO 2 /kg) and saturation time (~5 min) of 430 μm SIP particles were comparable to popular CO 2 chemisorption materials such as amine grafted silicates, in spite of the slow kinetics of NOHM-I-PEI in liquid form (CO 2 saturation time ~24 h for a 1 mm thin film).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation

Thermal stability of organic–inorganic hybrid perovskites (OIHPs) remains as one of the critical challenges against the stable operation of perovskite solar cells (PSCs) in direct sunlight with elevated temperatures. Here, we show that the addition of a polystyrene-co-polyacrylonitrile (SAN) copolymer can significantly enhance thermal stability of OIHPs and improve the stability of the corresponding PSCs by suppressing the migration of organic cations in OHIP. The methylammonium lead iodide (MAPI) with SAN incorporated within the perovskite layer featured a superior thermal stability compared to pure MAPI without SAN, only displaying an average of 5–15% decrease in PCE even after continuous thermal aging for 24 h at 100 °C. The secondary ion mass spectrometry revealed that the thermal degradation of the pure MAPI was largely associated with MA+ out-migration. Conducting atomic force microscopy analysis further indicated that the incorporated SAN led to a suppression of ionic currents present at the grain boundaries of the perovskite film, which was understood by high immiscibility between SAN and MA+ components as confirmed by the experimentally estimated Flory–Huggins parameter between them. This study newly identifies a potential of using polymer grain encapsulation for enhancing thermal stability of OIHPs and their solar cell performance by suppressing the out-diffusion of cationic organic components.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photogenerated Charge Separation in a CdSe Nanocluster Encapsulated in a Metal–Organic Framework for Improved Photocatalysis

Nanoclusters encapsulated in a metal–organic framework (MOF) are the subject of intense interest because of their high promise for photocatalysis. We show computationally that a CdSe nanocluster incorporated into NU-1000 (Cd 6 Se 6 @NU-1000) allows electron transfer from a visible-light photo-excited organic linker to the lowest unoccupied crystal orbital of the inorganic cluster, which can lead to charge separation. Substituents on the linker can be used to tune the band position and the band gap of the whole composite (Cd 6 Se 6 @NU-1000), and this makes it possible to perform the water splitting reaction under visible light. Here, the achievement of charge separation within the MOF leads to longer life of the excited states, and as a result, it can enhance the photocatalytic activity of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Melting Point Depression and Phase Identification of Sugar Alcohols Encapsulated in ZIF Nanopores

Sugar alcohols (SAs) have attractive characteristics as phase-change materials, but their relatively high melting temperature limits their application in the real world. Nanoconfinement can be a useful parameter to reduce the melting temperature to pragmatic ranges. Using molecular dynamics simulations, we investigate the phases and behaviors of encapsulated SA in ZIF-8 and ZIF-11, which cannot be experimentally observed. Based on reliable partial charges for the zeolitic imidazolate framework (ZIF) structures calculated by a density functional theory, structural analysis shows that the SA’s attractive interaction with the ZIF structure frustrates the SA crystallization and also elucidates the second-order phase transition between amorphous phases. A methodology is suggested to determine the phase transition temperature of confined materials and used to quantify the melting temperature depression of the ZIF-confined SAs. We also explored the thermal conductivity of SA-in-ZIF composites. Phonon frequency analysis verifies that the presence of SA molecules enhances the heat transfer by adding heat pathways between the nanoporous structure of ZIFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heteroatom-Doped Graphenes as Actively Interacting 2D Encapsulation Media for Mg-Based Hydrogen Storage

Nanoencapsulation using graphene derivatives enables the facile fabrication of two-dimensional (2D) nanocomposites with unique microstructures and has been generally applied to many fields of energy materials. Particularly, metal hydrides such as MgH 2 encapsulated by graphene derivatives have emerged as a promising hybrid material for overcoming the disadvantageous properties of Mg-based hydrogen storage. Although the behavior of the graphene–Mg nanoencapsulation interface has been studied for many composite materials, the direct modification of graphene with nonmetal foreign elements for changing the interfacial behavior has been limitedly reported. In this regard, using B-doped graphene and N-doped graphene as nanoencapsulation media for tuning the interfacial behavior of graphene derivative–Mg nanoparticles, we present altered hydrogen storage kinetics of heteroatom-doped (B and N) graphene–Mg composites. The effect of heteroatom doping is studied in terms of bonding configurations and heteroatom doping concentrations. The enhancement in hydrogen uptake was observed for all of the heteroatom-doped graphene–Mg nanocomposites. On the other hand, a few samples exhibit significantly low activation energy at the early stage of desorption, which can be related to the facilitated nucleus formation. Density functional theory calculation indicates that B-doping and N-doping accelerate hydrogen absorption kinetics in different ways, aiding charge transfer and inducing surface deformation of Mg nanoparticles, respectively. Their effects can be augmented in the presence of structural defects on graphene, such as vacancies, pores, or graphene edges. These results demonstrate that hydrogen storage kinetics of Mg-based systems can be altered by utilizing heteroatom-doped graphene oxide derivatives as 2D nanoencapsulation media, suggesting that the addition of a nonmetal doping element can also be applied to Mg-based hydrogen storage by modifying the nanoencapsulation interface without forming Mg alloy phases.

08 HYDROGEN↗