Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy conversion efficiencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Better Proton-Conducting Polymers for Fuel-Cell Membranes

Polyoxyphenylene triazole sulfonic acid has been proposed as a basis for development of improved proton-conducting polymeric materials for solid-electrolyte membranes in hydrogen/air fuel cells. Heretofore, the proton-conducting membrane materials of choice have been exemplified by a family of perfluorosulfonic acid-based polymers (Nafion7 or equivalent). These materials are suitable for operation in the temperature of 75 to 85 C, but in order to reduce the sizes and/or increase the energy-conversion efficiencies of fuel-cell systems, it would be desirable to increase temperatures to as high as 120 C for transportation applications, and to as high as 180 C for stationary applications. However, at 120 C and at relative humidity values below 50 percent, the loss of water from perfluorosulfonic acid-based polymer membranes results in fuel-cell power densities too low to be of practical value. Therefore, membrane electrolyte materials that have usefully high proton conductivity in the temperature range of 180 C at low relative humidity and that do not rely on water for proton conduction at 180 C would be desirable. The proposed polyoxyphenylene triazole sulfonic acid-based materials have been conjectured to have these desirable properties. These materials would be free of volatile or mobile acid constituents. The generic molecular structure of these materials is intended to exploit the fact, demonstrated in previous research, that materials that contain ionizable acid and base groups covalently attached to thermally stable polymer backbones exhibit proton conduction even in the anhydrous state.

Narayan, Sri↗
NASA NTRS2015

Radioisotope Power System Pool Concept

Advanced Radioisotope Power Systems (RPS) for NASA deep space science missions have historically used static thermoelectric-based designs because they are highly reliable, and their radioisotope heat sources can be passively cooled throughout the mission life cycle. Recently, a significant effort to develop a dynamic RPS, the Advanced Stirling Radioisotope Generator (ASRG), was conducted by NASA and the Department of Energy, because Stirling based designs offer energy conversion efficiencies four times higher than heritage thermoelectric designs; and the efficiency would proportionately reduce the amount of radioisotope fuel needed for the same power output. However, the long term reliability of a Stirling based design is a concern compared to thermoelectric designs, because for certain Stirling system architectures the radioisotope heat sources must be actively cooled via the dynamic operation of Stirling converters throughout the mission life cycle. To address this reliability concern, a new dynamic Stirling cycle RPS architecture is proposed called the RPS Pool Concept.

Power↗
NASA NTRS2019

NASA Acoustic Stirling IRAD Thermal Recovery Energy Efficient System (TREES) Energy Conversion and Management in Aircraft

NASA Acoustic Stirling IRAD (Internal Research and Development) Thermal Recovery Energy Efficient System (TREES) Energy Conversion and Management in Aircraft. Presentation on energy conversion on aircraft. Thermal energy recovery changes aircraft thermal management from being a necessary burden on aircraft performance to a desirable asset. It improves the engine performance by recycling waste heat and ultimately rejecting all collected aircraft heat out through the engine nozzle.

Dyson, Rodger↗
NASA NTRSDate not supplied

Quantum Mechanical Simulations of Dynamics of Electronic Excitations in Low-Dimensional Photovoltaics Materials

Dynamics of electronically excited states including exciton generation and relaxation, exciton-exciton interaction, and charge/energy transfer and transport, are critical to understanding and optimizing photovoltaic materials. Although considerable progress has been made, accurate experimental characterization of such crucial dynamics remains extremely challenging, especially in low-dimensional materials. In this talk, I will discuss how the advancement of quantum mechanical simulations of the dynamics of electronic excitations can reveal the physical mechanisms hindering or improving solar energy harvest. Specifically, we find that surface dangling-bond defects on silicon quantum dots cause rapid charge recombination and low carrier mobility in the inorganic-organic PV cells. Although small quantum dots are essentially free of defects, their optical gaps are too large. To solve this issue, a full-spectrum-light-absorption scheme is computationally designed, taking advantage of complexity and flexibility of low-dimensional materials consisting of different characteristics and dimensions. In this scheme the multifunctional ligands are used to (1) passivate against oxidation, (2) facilitate interfacial charge transfer, and (3) improve both charge transport and optical absorption. A joint theoretical and experimental study has demonstrated the feasibility of this approach. Finally, I will briefly talk about how this scheme and the well-tested quantum mechanical simulations can be employed to help improve energy-conversion efficiency in perovskite photovoltaics including perovskite-based tandem cells.

Zhigang Wu↗
NASA NTRS1976

Status of photoelectrochemical production of hydrogen and electrical energy

The efficiency for conversion of electromagnetic energy to chemical and electrical energy utilizing semiconductor single crystals as photoanodes in electrochemical cells was investigated. Efficiencies as high as 20 percent were achieved for the conversion of 330 nm radiation to chemical energy in the form of hydrogen by the photoelectrolysis of water in a SrTiO3 based cell. The SrTiO3 photoanodes were shown to be stable in 9.5 M NaOH solutions for periods up to 48 hours. Efficiencies of 9 percent were measured for the conversion of broadband visible radiation to hydrogen using n-type GaAs crystals as photoanodes. Crystals of GaAs coated with 500 nm of gold, silver, or tin for surface passivation show no significant change in efficiency. By suppressing the production of hydrogen in a CdSe-based photogalvanic cell, an efficiency of 9 percent was obtained in conversion of 633 nm light to electrical energy. A CdS-based photogalvanic cell produced a conversion efficiency of 5 percent for 500 nm radiation.

Byvik, C. E.↗
NASA NTRS1981

Thermodynamic limits to the efficiency of solar energy conversion by quantum devices

The second law of thermodynamics imposes a strict limitation to the energy converted from direct solar radiation to useful work by a quantum device. This limitation requires that the amount of energy converted to useful work (energy in any form other than heat) can be no greater than the change in free energy of the radiation fields. Futhermore, in any real energy conversion device, not all of this available free energy in the radiation field can be converted to work because of basic limitations inherent in the device itself. A thermodynamic analysis of solar energy conversion by a completely general prototypical quantum device is presented. This device is completely described by two parameters, its operating temperature T sub R and the energy threshold of its absorption spectrum. An expression for the maximum thermodynamic efficiency of a quantum solar converter was derived in terms of these two parameters and the incident radiation spectrum. Efficiency curves for assumed solar spectral irradiance corresponding to air mass zero and air mass 1.5 are presented.

Buoncristiani, A. M.↗
NASA NTRS1984

Status of high-efficiency module design and fabrication

The fabrication of high efficiency solar energy conversion modules (13% efficiency at NOCT - Nominal Operating Cell Temperature) is discussed, with emphasis placed on reducing NOCT, since reduced operating temperature improves both efficiency and module lifetime.

Spitzer, M. B.↗
NASA NTRS1982

Solar energy conversion using surface plasmons for broadband energy transport

A new strategy for efficient solar energy conversion based on parallel processing with surface plasmons is introduced. The approach is unique in identifying: (1) a broadband carrier with suitable range for energy transport, and (2) a technique to extract more energy from the more energetic photons, without sequential losses or unique materials for each frequency band. The aim is to overcome the fundamental losses associated with the broad solar spectrum and to achieve a higher level of spectrum splitting than has been possible in semiconductor systems.

Anderson, L. M.↗
NASA NTRS1992

High efficiency thermal to electric energy conversion using selective emitters and spectrally tuned solar cells

Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1500 K. Depending on the nature of parasitic losses, overall thermal-to-electric conversion efficiencies greater than 20 percent are feasible.

Chubb, Donald L.↗
NASA NTRS1985

Middle atmosphere modeling

Breaking gravity waves generate and maintain a background level of turbulence which is capable of producing substantial cooling and/or heating in the upper mesosphere and lower thermosphere. The net thermodynamic effect of breaking gravity waves is critically dependent on the eddy Prandt number (P sub t) applicable to mesospheric turbulence. When P sub t is approximately 1, the calculations of the heat budget for the mesopause region imply that the globally averaged eddy or turbulent diffusion coefficient cannot exceed .000001 sq cm/s. This upper limit on turbulant diffusion applies to both potential temperature transport and chemically inert tracer transport when radiative damping is neglible. For chemically active species larger diffusion coefficients are permitted, because the effective eddy diffusion coefficient is increased by an additive term L/2 gamma (sup 2), where L is the chemical loss rate and gamma is the vertical wavenumber. For P sub t is approximately 4 to 6, the turbulent diffusion of momentum (D sub M) is sufficiently greater than the turbulent diffusion of heat (D sub H) that the conversion of gravity wave energy to heat with high efficiency nearly balances the divergence of the downward eddy heat flux in the wave breaking zone. Therefore the heat budget of the mesopause region would no longer provide a powerful and useful constraint on D sub H. If P sub t exceeds 6 with high efficiency for energy conversion to heat, gravity waves would heat the mesosphere throughout the wave breaking region.

Strobel, D. F.↗
NASA NTRS1980

Photocell heat engine solar power systems

A combined photocell heat engine concept is proposed for high efficiency solar energy conversion in space. In this concept the short wavelength portion of the solar spectrum is split by a dichroic filter and sent to a bank of photocells. The long wave-length remainder of the spectrum is used by the heat engine. This technique allows the photocells to operate with the minimum amount of waste heat, increasing their efficiency and reducing the amount of cooling required. The heat engine operates by direct absorption in a working fluid containing broadband absorber molecules or particulates. A window in the heat engine admits the long wave-lengths from the solar spectrum. The window may also reflect a portion of the internal gaseous reradiation spectrum (e.g., a heat mirror) to help reduce radiation losses. Flow-induced thermal gradients may also reduce reradiation losses in the case of optically thick working fluids. The efficiencies computed for the photocell heat engine solar energy converter can be as high as 42 percent.

Taussig, R. T.↗
NASA NTRS1993

High efficiency direct thermal to electric energy conversion from radioisotope decay using selective emitters and spectrally tuned solar cells

Thermophotovoltaic (TPV) systems are attractive possibilities for direct thermal-to-electric energy conversion, but have typically required the use of black body radiators operating at high temperatures. Recent advances in both the understanding and performance of solid rare-earth oxide selective emitters make possible the use of TPV at temperatures as low as 1200K. Both selective emitter and filter system TPV systems are feasible. However, requirements on the filter system are severe in order to attain high efficiency. A thin-film of a rare-earth oxide is one method for producing an efficient, rugged selective emitter. An efficiency of 0.14 and power density of 9.2 W/KG at 1200K is calculated for a hypothetical thin-film neodymia (Nd2O3) selective emitter TPV system that uses radioisotope decay as the thermal energy source.

Chubb, Donald L.↗
NASA NTRS2013

Summary of Stirling Convertor Testing at NASA Glenn Research Center in Support of Stirling Radioisotope Power System Development

The NASA Glenn Research Center (GRC) has been testing 100 We class, free-piston Stirling convertors for potential use in Stirling Radioisotope Power Systems (RPS) for space science and exploration missions. Free-piston Stirling convertors are capable of achieving a 38% conversion efficiency, making Stirling attractive for meeting future power system needs in light of the shrinking U.S. plutonium fuel supply. Convertors currently on test include four Stirling Technology Demonstration Convertors (TDCs), manufactured by the Stirling Technology Company (STC), and six Advanced Stirling Convertors (ASCs), manufactured by Sunpower, Inc. Total hours of operation is greater than 514,000 hours (59 years). Several tests have been initiated to demonstrate the functionality of Stirling convertors for space applications, including: in-air extended operation, thermal vacuum extended operation. Other tests have also been conducted to characterize Stirling performance in anticipated mission scenarios. Data collected during testing has been used to support life and reliability estimates, drive design changes and improve quality, and plan for expected mission scenarios. This paper will provide a summary of convertors tested at NASA GRC and discuss lessons learned through extended testing.

Energy Conversion Efficiency↗