Search NASA⌕ Search

SEARCH · Search NASA

Results for “environmental footprint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ghent Generating Station Nuclear Study: Siting Evaluation

The purpose of this initial siting evaluation is to assess the suitability of the PPL Corporation (PPL) owned land at/near the Kentucky Utilities Ghent Generating Station (GGS) for the deployment of advanced nuclear reactors and to determine if there are any exclusionary or avoidance factors associated with siting nuclear power at GGS. The formal siting process for a nuclear reactor requires a great level of time (i.e., multiple years), effort, and detail. The Electric Power Research Institute (EPRI) estimates the formal siting process could take a dedicated team between one and three years to complete. This initial siting evaluation considers several characteristics (e.g., environmental conditions, seismic concerns, footprint, water use, etc.) and highlights favorable/preferred characteristics as well as potential risks to feasibility. Potential risks were explored in greater detail to provide PPL with additional insights to support decision planning. The results indicate the strengths and weaknesses associated with the GGS site as a location for a nuclear generating station and are intended to inform PPL’s next steps. The results of this initial siting evaluation will also inform the selection of candidate nuclear technologies for the GGS site that align with PPL’s mission and business objectives.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Environmental life cycle assessment of treatment and management strategies for food waste and sewage sludge

A consequential life cycle assessment (LCA) was utilized to compare the environmental impacts of food waste and sewage sludge management strategies. The strategies included a novel two-phase anaerobic digestion (AD) system and alternatives including landfill, waste-to-energy, composting, anaerobic membrane bioreactor, and conventional AD (wet continuous stirred-tank reactor [CSTR]). The co-management of food waste with sewage sludge was also considered for the two-phase AD system and for a conventional AD reactor. Further, a multidimensional LCA approach was taken, considering the five-midpoint impact categories of global warming, smog, human health particulate, acidification, and eutrophication estimated using the U.S. EPA Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts. Co-management of food waste and sewage sludge using the novel two-phase AD system was shown to maximize energy recovery and had a net global warming benefit while reducing other environmental impacts compared with the alternative management strategies. It had similar relative environmental advantages across all categories as conventional AD, with the advantage of a smaller physical footprint. However, both approaches featured net environmental burdens when the background electric grid intensity fell below 0.25 kg CO 2 -eq kWh -1 , as could be expected in a decarbonized electric future. Upgrading the biogas produced from AD to renewable natural gas can displace the use of fossil natural gas for other non-electricity energy requirements that are difficult to decarbonize and may extend the time period of significant environmental benefits of utilizing AD for organic waste management. Treatment of the nutrient-rich supernatant generated by the novel two-phase AD system could be an obstacle for utilities with stringent nutrient discharge limits. Future research and full-scale implementation are needed to demonstrate the benefits of the two-phase AD system predicted through this analysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Estimating CO 2 fluxes through integrating spatial and temporal input layers via deep learning algorithms

Background Accurate estimation of net ecosystem exchange of CO 2 fluxes (Fc) is essential for understanding carbon cycle processes and assessing ecosystem carbon budgets. However, conventional modeling approaches often emphasize temporal dynamics while overlooking the pronounced spatial heterogeneity within the footprint of eddy covariance (EC) towers, potentially limiting predictive accuracy and interpretability of Fc estimates. To address this challenge, we developed a spatiotemporal model that integrates high-resolution footprint-weighted spatial information with sequential environmental drivers. Results The integrated model combines a deeper graph convolutional network to characterize fine-scale spatial variability within EC footprints and a gated recurrent unit network to capture temporal dependencies in biophysical conditions. Using multi-year flux tower observations, remote sensing vegetation indices and footprint modeling, we evaluate the proposed method across three land cover types. This spatiotemporal model consistently outperforms temporal-only and spatial-only baselines, achieving the highest overall accuracy (R 2 = 0.9569) and the lowest RMSE (1.8128 μmol m −2 s −1 ) and MAE (1.1939 μmol m −2 s −1 ). Performance gains are particularly evident in ecosystems with strong vegetation heterogeneity, where spatial structure substantially modulates Fc variability. Conclusions This study demonstrates the importance of joint modeling spatial heterogeneity and temporal dynamics for improving Fc estimation and provides a robust method for advancing footprint-based Fc estimates across diverse ecosystems, supporting refined assessments of terrestrial carbon fluxes, and enhancing scientific foundations for carbon studies.

CO2 flux estimate↗
DOE OSTI2025

Injection Locking of Gigahertz‐Frequency Surface Acoustic Wave Phononic Crystal Oscillator

Low-noise gigahertz (GHz) frequency sources are essential for applications in signal processing, sensing, and telecommunications. Surface acoustic wave (SAW) resonator-based oscillators offer compact form factors and low-phase noise due to their short mechanical wavelengths and high-quality (Q) factors. However, their small footprint makes them vulnerable to environmental variation, resulting in their poor long-term frequency stability. Injection locking is widely used to suppress frequency drift of lasers and oscillators by synchronizing to an ultra-stable reference. Here, injection locking of a 1-GHz SAW phononic-crystal oscillator is demonstrated, achieving 40-dB phase noise reduction at low offset frequencies and unperturbed low noise at large offset frequencies. Compared to a free-running SAW oscillator, which typically exhibits frequency drifts of several hundred hertz over minutes, the injection-locked oscillator reduces the frequency deviation to below 0.35 Hz. The locking range and oscillator dynamics is also investigated in the injection pulling region. The demonstrated injection-locked SAW oscillator could find applications in high-performance portable telecommunications and sensing systems.

injection locking↗
DOE OSTI2023

Coronado Generating Station Repowering Evaluation - Siting Evaluation

The purpose of this initial siting evaluation is to consider the suitability of the Salt River Project (SRP) owned land at/near Coronado Generating Station (CGS) for a nuclear generating station (including advanced light water reactors, light water small modular reactors, and non-light-water designs1) and to assess if there are any exclusionary or avoidance factors associated with coal to nuclear repowering at CGS. This initial siting evaluation considers several characteristics (e.g., environmental conditions, seismic concerns, site footprint, water use, etc.) and highlights favorable/preferred characteristics as well as potential risks to feasibility. The results are intended to inform SRP on the strengths and weaknesses associated with the CGS site and inform the selection of candidate nuclear technologies for the CGS site that align with SRP’s mission and business objectives. This report relies on industry-recognized siting guidance, including Electric Power Research Institute’s (EPRI’s) Siting Guide (Reference 1) 2 and Nuclear Regulatory Commission’s (NRC’s) Regulatory Guide (RG) 4.7 (Reference 3), as well as nuclear domain expertise within the Gateway for Accelerated Innovation in Nuclear (GAIN), MPR Associates, Inc. (MPR), and the Idaho National Laboratory (INL).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Opportunities for Catalytic Reactions and Materials in Buildings

Residential and commercial buildings are responsible for over 30% of global final energy consumption and accounts for ~40% of annual direct and indirect greenhouse gas emissions. Energy efficient and sustainable technologies are necessary to not only lower the energy footprint but also lower the environmental burden. Many proven and emerging technologies are being pursued to meet the ever-increasing energy demand. Catalytic science has a significant new role to play in helping address sustainable energy challenges, particularly in buildings, compared to transportation and industrial sectors. Thermally driven heat pumps, dehumidification, cogeneration, thermal energy storage, carbon capture and utilization, emissions suppression, waste-to-energy conversion, and corrosion prevention technologies can tap into the advantages of catalytic science in realizing the full potential of such approaches, quickly, efficiently, and reliably. Catalysts can help increase energy conversion efficiency in building related technologies but must utilize low cost, easily available and easy-to-manufacture materials for large scale deployment. This entry presents a comprehensive overview of the impact of each building technology area on energy demand and environmental burden, state-of-the-art of catalytic solutions, research, and development opportunities for catalysis in building technologies, while identifying requirements, opportunities, and challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Sample of Nearby Isolated Dwarf Galaxies: A First Look at the Mass Function of Field Dwarfs

We present the results of the Exploration of Local VolumE Survey-Field, a survey of the dwarf galaxies in the Local Volume (LV; D < 10 Mpc) over roughly 3000 deg 2 , focusing on the field dwarf population. Candidates are detected using a semiautomated algorithm tailored for low-surface brightness dwarfs. Using tests with injected galaxies, we show the detection is 50% complete to m g ∼ 20 mag and M ⋆ ∼ 10 6 M ⊙ . Candidates are confirmed to be true nearby dwarfs through distance measurements including redshift, tip of the red giant branch, and surface brightness fluctuations. We identify isolated field dwarfs using various environmental criteria. Over the survey footprint, we detect and confirm 95 LV dwarfs, 44 of which we consider isolated. Using this sample, we infer the field dwarf mass function and find good agreement at the high-mass end with previous redshift surveys and with the predictions of the Illustris-TNG simulation. This sample of isolated field dwarfs represents a powerful dataset to investigate aspects of small-scale structure and the effect of environment on dwarf galaxy evolution.

Carlsten, Scott G. [Princeton Univ., NJ (United St↗
DOE OSTI2020

Alternative Treatment of Defense Waste Processing Facility Recycle via Reuse of Existing Liquid Waste Facilities - 20097

The Defense Waste Processing Facility (DWPF) at Savannah River Site (SRS) has been immobilizing high level waste since 1996. The chemical process within DWPF generates a large volume of condensate, which is recycled to the SRS H-Area Tank Farm. The recycle stream includes a small quantity of sludge solids, as well as soluble cesium that is volatilized during melter operation. The recycle waste is currently received into a large, underground waste tank that separates insoluble solids via decanting. The supernate is treated by an evaporator with a concentrate stream that is stored for future processing. The evaporator overheads are collected and sent to the Effluent Treatment Project (ETP) for final polishing and testing prior to discharge to local surface water. Recycle storage and treatment as described above complicates the overall mission within the tank farms, which are primarily engaged in waste retrieval and preparation activities that support sludge and salt disposition, as well as tank characterization and closure. The need to devote a portion of available storage space to recycle treatment limits operational flexibility, and ultimately the DWPF recycle stream must be diverted to fully close all the SRS waste tanks. An alternative treatment process is being explored to decouple the recycle stream from the tank farm. The proposed treatment process will accomplish solids separation via crossflow filtration and will utilize a wiped film evaporator to volume-reduce the filtrate stream. Evaporator overheads will continue to be further processed in ETP while the solids stream and evaporator concentrate stream will be returned for reprocessing with the DWPF and Salt Waste Processing Facility (SWPF). This process will utilize existing facilities within DWPF and the tank farm that were previously dedicated to Interim Salt Disposition (ISD), but no longer have an identified mission with the startup of SWPF. The reuse of these facilities will remove several constraints from the current Liquid Waste (LW) System Plan without expanding the current footprint of Department of Energy Environmental Management (EM) infrastructure within LW. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Material efficiency and climate change mitigation of passenger vehicles

A transition to electric vehicles and renewable energy is currently underway but may not be rapid enough in order to reach ambitious climate change mitigation targets. Therefore, additional, preferably instantaneous, measures are needed for quick emissions reductions, which is where material efficiency (ME) could constitute a promising solution. ME strategies include but are not limited to vehicle lightweighting through material substitution, increased recycling of materials, reuse and remanufacturing of vehicle components, vehicle downsizing (switching to a smaller vehicle) and more intensive use by means of increased vehicle occupancy through sharing practices. While recent analyses have focused on a narrow subset of these, we find striking differences in the overall potential of different strategies to decrease vehicular carbon footprints. Downsizing and more intensive use offer the largest mitigation potential but strongly depend on consumer behavior and are highly sensitive to modeling assumptions. Combined, the analyzed strategies can achieve emission reductions of up to 57% over the life cycle of a single vehicle, which is comparable to up to 83% achieved through a shift to low-carbon energy supply. ME can cut carbon footprints of already efficient vehicles charging renewable electricity by half again. This makes ME both an excellent short-term solution for climate change mitigation targeting the light vehicle sector but also an important complementary strategy to the long-term transition towards electric vehicles and renewable energy supply.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Can upscaling ground nadir SIF to eddy covariance footprint improve the relationship between SIF and GPP in croplands?

Ground solar-induced chlorophyll fluorescence (SIF) is important for the mechanistic understanding of the dynamics of vegetation gross primary production (GPP) at fine spatiotemporal scales. However, eddy covariance (EC) observations generally cover larger footprint areas than ground SIF observations (a bare fiber with nadir), and this footprint mismatch between nadir SIF and GPP could complicate the canopy SIF-GPP relationships. Here, we upscaled nadir SIF observations to EC footprint and investigated the change in SIF-GPP relationships after the upscaling in cropland. We included 13 site-years data in our study, with seven site-years corn, four site-years soybeans, and two site-years miscanthus, all located in the US Corn Belt. All sites’ crop nadir SIF observations collected from the automated FluoSpec2 system (a hemispheric-nadir system) were upscaled to the GPP footprint-based SIF using vegetation indices (VIs) calculated from high spatiotemporal satellite reflectance data. We found that SIF-GPP relationships were not substantially changed after upscaling nadir SIF to GPP footprint at our crop sites planted with corn, soybean, and miscanthus, with R 2 change after the upscaling ranging from -0.007 to 0.051 and root mean square error (RMSE) difference from -0.658 to 0.095 umol m –2 s –1 relative to original nadir SIF-GPP relationships across all the site-years. The variation of the SIF-GPP relationship within each species across different site-years was similar between the original nadir SIF and upscaled SIF. Different VIs, EC footprint models, and satellite data led to marginal differences in the SIF-GPP relationships when upscaling nadir SIF to EC footprint. Furthermore, our study provided a methodological framework to correct this spatial mismatch between ground nadir SIF and GPP observations for croplands and potentially for other ecosystems. Our results also demonstrated that the spatial mismatch between ground nadir SIF and GPP might not significantly affect the SIF-GPP relationship in cropland that are largely homogeneous.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Democratizing life cycle assessment by developing a streamlined model of greenhouse gas emissions from US natural gas supply chains

Natural gas (NG) supply chains contribute substantially to the global energy supply and anthropogenic methane emissions, making them frequent subjects of life cycle assessments (LCAs). To better characterize central tendencies and variability, we systematically reviewed and harmonized published estimates of life cycle greenhouse gas (GHG) emissions from United States NG supply chains. Results informed a streamlined LCA model (SLiNG-GHG: streamlined LCAs of NG-GHGs) that quantifies carbon dioxide and methane from three gates: transmission, distribution, and shipping. Median estimates employing harmonized emission inputs, are 10, 11, and 21 g CO2e/MJ gas (100-year global warming potentials [GWPs]), and 20, 22, and 33 g CO2e/MJ gas (20-year GWPs), delivered to each gate, respectively. Alternatively, inputting available, independent methane measurements, SLiNG-GHG estimates varied from -23% to +316% relative to baseline. Bottom-up inventories used in LCAs tend to underestimate methane compared with measurements. Results underscore the need for open-source, streamlined LCA models that can easily incorporate rapidly evolving measurements for non-experts like investors and regulators.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Idaho National Laboratory’s FY 2020 Greenhouse Gas Report

A greenhouse gas (GHG) inventory is a systematic approach to account for the production and release of certain gases generated by an institution from various emission sources. The gases of interest are those that climate science has identified as related to anthropogenic global climate change. This document presents an inventory of GHGs generated during fiscal year (FY) 2020 by Idaho National Laboratory (INL)—a Department of Energy (DOE) sponsored entity located in southeastern Idaho. In recent years, concern has grown about the environmental impact of GHGs. This, together with a desire to decrease harmful environmental impacts, would be enough to encourage the calculation of an inventory of the total GHGs generated at INL. Additionally, INL has a desire to see how its emissions compare with similar institutions, including other DOE national laboratories. Executive Order 13834 requires that federal agencies and institutions track and report GHG emissions where required. INL’s GHG inventory was calculated according to methodologies identified in federal GHG Guidance documents using operational control boundaries. It measures emissions generated in three scopes: (1) INL emissions produced directly by stationary or mobile combustion and by fugitive emissions, (2) the share of emissions generated by entities from which INL purchased electrical power, and (3) indirect or shared emissions generated by outsourced activities that benefit INL (occurring outside INL’s organizational boundaries, but are a consequence of INL’s activities). This inventory found that INL generated 76,494.12 metric tons (MT) of CO2 equivalent (CO 2 e) emissions during FY 2020. The following conclusions were made from looking at the results of the individual contributors to INL’s FY 2020 GHG inventory: (1) Electricity (including the associated transmission and distribution losses) is the largest contributor to INL’s GHG inventory, with over 50% of the CO 2 e emissions; (2) Other sources with high emissions were employee commuting, mobile combustion (fleet fuels), stationary combustion (facility fuels), and waste disposal (fugitive emissions from the onsite landfill); and (3) Sources with low emissions were waste disposal (contracted disposal), fugitive emissions from refrigerants, wastewater treatment (onsite and contracted), and business ground travel (in personal and rental vehicles). This report details the methods behind quantifying INL’s GHG inventory and discusses lessons learned on better practices by which information important to tracking GHGs can be tracked and recorded. It is important to note that because this report differentiates between those portions of INL that are managed and operated by Battelle Energy Alliance, LLC (BEA) and those managed by other contractors, it includes only INL’s activities overseen by BEA. It is assumed that other contractors will provide similar reporting for those activities they manage, where appropriate.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2004

Global Patterns in Human Consumption of Net Primary Production

The human population and its consumption profoundly affect the Earth's ecosystems. A particularly compelling measure of humanity's cumulative impact is the fraction of the planet's net primary production that we appropriate for our Net primary production-the net amount of solar energy converted to plant organic matter through photosynthesis-can be measured in units of elemental carbon and represents the primary food energy source for the world's ecosystems. Human appropriation of net primary production, apart from leaving less for other species to use, alters the composition of the atmosphere, levels of biodiversity, flows within food webs and the provision of important primary production required by humans and compare it to the total amount generated on the landscape. We then derive a spatial ba!mce sheet of net primary production supply and demand for the world. We show that human appropriation of net primary production varies spatially from almost zero to many times the local primary production. These analyses reveal the uneven footprint of human consumption and related environmental impacts, indicate the degree to which human populations depend on net primary production "imports" and suggest policy options for slowing future growth of human appropriation of net primary production.

Imhoff, Marc L.↗
NASA NTRS2006

Human Appropriation of Net Primary Production - Can Earth Keep Up?

The amount of Earth's vegetation or net primary production required to support human activities is powerful measure of aggregate human impacts on the biosphere. Biophysical models applied to consumption statistics were used to estimate the annual amount of net primary production in the form of elemental carbon required for food, fibre, and fuel-wood by the global population. The calculations were then compared to satellite-based estimates of Earth's average net primary production to produce a geographically explicit balance sheet of net primary production "supply" and "demand". Humans consume 20% of Earth's net primary production (11.5 petagrams carbon) annually and this percentage varies regionally from 6% (South America) to over 70% (Europe and Asia), and locally from near 0% (central Australia) to over 30,000% (New York City, USA). The uneven footprint of human consumption and related environmental impacts, indicate the degree to which human populations are vulnerable to climate change and suggest policy options for slowing future growth of NPP demand.

Imhoff, Marc L.↗
DOE OSTI2022

Into the net zero emissions and climate change control: From solid carbon waste to effective solar convertors

Here, in this work, we demonstrate the potential for solar-to-heat conversion of carbon byproducts and their outstanding effects to reduce anthropogenic emissions. Those carbon byproducts are soots (biomass, evaporated carbon, etc.) as well as morphed graphenes. Our results cover optical characterization to demonstrate their suitability as heat capacitors and solar-to-heat convertors. Our raw materials are sustainable and currently considered environmental pollutants that require true attention to minimize global warming effects. Fortunately, they are ideal candidates to reduce the carbon footprints and can contribute towards a true net-zero environmental transition. We explore and demonstrate that soots are among the most competitive materials to transform solar energy into heat due to their absorption capacity, and durability. These materials are more competitive than commercial products and other known solar convertors demonstrating the superior thermosolar benefits. The best candidate is biomass with solar absorptivity, light emission, and cost reduction of 96, 85% and 15-fold, respectively, when compare to commercial products. Biomass and soot have comparable or better solar conversion characteristics, and sustainability than pristine carbon nanostructures and they are up to 3 orders of magnitude cheaper.

14 SOLAR ENERGY↗
DOE OSTI2023

Glass and a carbon‐free United States: What is glass's role in the upcoming green revolution?

Abstract The climate is changing rapidly due to anthropogenic greenhouse gases. Glass is a significant contributor to these emissions, with 95 million tons of CO 2 being emitted due to glass manufacturing in recent years. Furthermore, glass recycling remains poor in the United States, and most glass is left to landfill after a single use. The lack of recycling and the carbon footprint of manufacturing have made glass an environmentally damaging material despite its theoretical infinite recyclability. Additionally, glass has the potential to enable next‐generation energy materials, enabling the necessary technology for a green economy. In this review, we briefly cover the challenges of glass manufacturing and how to make glass the benchmark material for a carbon‐neutral economy.

Wilkinson, Collin↗
DOE OSTI2025

The 8RH 2 Process for Producing Clean Hydrogen with Autothermal Reforming and Carbon Capture

The primary objective of this project is to demonstrate the commercial viability and environmental benefits of an 8 Rivers Hydrogen (8RH 2 ) process, a proprietary technology developed to optimally produce high-purity blue H 2 with up to 99% carbon capture. This 8RH 2 process is particularly notable for its integration of a low-energy cryogenic CO 2 separation system that not only maximizes hydrogen recovery but also minimizes the carbon footprint of the operation. This aligns with global environmental goals and supports the United States' push toward energy sustainability and independence.

03 NATURAL GAS↗
DOE OSTI2023

Cellulose Nanocrystals’ Role in Critical Mineral Beneficiation: Dual Aggregate-Dispersant Behavior Supports Environmentally Benign Nickel Processing

Environmentally unsustainable and toxic chemical flocculants and dispersants from nickel (Ni) processing contribute to industrial effluents that greatly impact biodiversity and aquatic life. Despite the industry’s efforts to reduce its ecological footprint—primarily due to the lack of commercially available biodegradable, environmentally benign, and non-toxic reagents—these reagents continue to harm natural ecosystems. Chemicals used during the processing operations often target a specific unit operation that negatively affects downstream operations. In this study, we discover the concentration-dependent behavior of cellulose nanocrystals (CNCs) as a dispersant and flocculant, avoiding the use of various harmful chemicals in the nickel processing stages. Electrophoretic, optical brightfield microscopy, and quartz crystal microbalance-dissipation studies detected charge neutralization behavior by renewable and biodegradable CNCs, which can greatly benefit Ni processing operations. Microflotation experiments demonstrated that CNCs enhanced Ni recovery from 62 to 77 wt.% and concentrate grade from 15 to 20 wt.%. Settling and turbidity studies demonstrated the dual flocculant-dispersant behavior of CNCs resulting from the alignment of CNC fibers along the octahedral brucite basal and amphoteric edge plane of serpentine. CNCs can be used as dispersants during froth flotation to improve Ni beneficiation and as post-processing flocculants for tailings management and dewatering, which is one of the major environmental and social concerns facing the mining and mineral processing industry. This study paves the way for CNCs to be used as flocculants and dispersants in a range of industries from healthcare to pharmaceuticals to semiconductor devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗