Search NASA⌕ Search

SEARCH · Search NASA

Results for “estimation steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Initial Testing of an In Situ Load Retention Aging Vessel

A thermal aging vessel instrumented with load cells was fabricated. The primary function of the vessel is to continuously monitor the in situ load retention of up to three compressed polymer coupons undergoing thermally accelerated aging under nitrogen. A secondary function is to enable gas sampling of the vessel headspace during thermal aging. Heating of the vessel is achieved using a custom heater jacket. To improve upon our conventional aging study methods which require periodic interruption of aging to perform load testing in an Instron machine at room temperature, this technology aims to automate/facilitate data acquisition/analysis, improve data quality, and enable uninterrupted compression of the polymer which represents the service condition. As an example case to assess functionality of the in situ vessel, the load retention of a siloxane elastomer material additively manufactured by direct-ink-writing (DIW) was measured at three different isothermal aging temperatures for ~1 month. Initial compression of the coupons while near the aging temperature was achieved by temporarily opening the heated vessel to access the interior chamber and manually tightening four nuts to drive the heated compression plate down onto the heated coupons. Initial testing demonstrated achievement of the primary load retention monitoring function. Unfortunately, the vessel leaked which prevented gas sampling; an active purge was used to maintain a nitrogen atmosphere. Welded or otherwise sealed joints, which could be implemented in a future design, would likely eliminate leak paths. To apply time-temperature superposition (TTS), a technique used to provide long-term prediction of the load retention from short-term isothermal data, the load retention needed to be calculated relative to the load at an estimated “equilibrium” time, after most of the transient viscoelastic physical relaxation occurred. The peak load immediately after compression could not be used as the load retention basis for two reasons: (1) age-related changes must be isolated from non-age-related physical relaxation before applying TTS and (2) the manual mechanism used to compress the specimens at the aging temperature was neither smooth nor repeatable which affected the peak load value. To better understand the effect of the mode of initial compression on the measured load, and possibly better estimate “equilibrium” physical relaxation times, systematic stress relaxation experiments were performed using an Instron machine with a thermal chamber. At a given temperature, the DIW polymer was compressed to a fixed strain in either a stepped or continuous manner at two different rates, then held at that strain for 24 hrs. The results indicated that, at a given temperature, the different stress relaxation curves appeared to converge to the same curve at some “equilibrium” time when the non-age-related physical relaxation was mostly complete. Though this observation suggests that the discontinuous manual compression employed by the vessel is feasible, a compression mechanism that is rapid, smooth, and repeatable would enhance its use.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues

The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.

and nuclear chemistry↗
DOE OSTI2026

Towards a theoretical understanding of excitonic properties of phthalocyanine thin films. I. Low-temperature exciton absorption spectra

Phthalocyanine (Pc)-based molecular thin films have emerged in recent years as a promising class of organic semiconductor materials for optoelectronic applications owing to their long exciton coherence length and fast exciton diffusion. However, the dependence of their exciton properties on the dimensionality and thermodynamic conditions, presence of metal ions, and effects of chemical modifications to the PC systems is not yet fully understood. As a first step towards a more comprehensive theoretical understanding of the excitonic properties of Pc thin films, we model their low-temperature exciton absorption spectra by employing the Frenkel Hamiltonian. The latter is derived from quantum-chemical estimates of site energies and exciton–exciton couplings. The predicted exciton absorption spectra of octabutoxy phthalocyanine (H 2 OBPc) is found to be strongly dependent on the dimensionality of the model as well as the distance cutoff for including the monomer–monomer exciton coupling. We also caution that the widely used dipole–dipole approximation could substantially overestimate the excitonic coupling between different monomers compared to a more accurate evaluation using the respective transition densities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Concurrent two-way coupling of global and local models across internal boundaries with non-matching discretizations

Coupling local and global models enables efficient simulation of multiscale systems, where global models capture large-scale behavior and local models, with enhanced physics, resolve finer details over a smaller region. Here, this paper presents a mathematically consistent method for coupling physics-based models of varying fidelity across adjacent, non-overlapping subdomains, even when discretizations do not match at the immersed interdomain interfaces. Incompressible Navier-Stokes equations (NSE) constitute the global model while residual-based turbulence model serves as the local high-fidelity model. In addition, a scalar advection-diffusion equation that models the convection of an active scalar field is appended to the turbulence model in the local domain. This scalar field does not have its complement in the global model, giving rise to unequal number of equations at the immersed boundary between local and global models. Interdomain coupling terms are derived via the Variational Multiscale Discontinuous Galerkin (VMDG) method with new developments in scale representation and efficient fine-scale estimation. While transient laminar flows modeled with NSE in the global domain can be resolved with relatively coarse mesh, turbulent flow calculations in the local model require much finer spatial discretizations as well as smaller time-step for appropriately resolving the turbulent flow physics. The proposed framework also accommodates non-matching meshes at the immersed boundaries. Test problems in 2D and 3D numerically showcase the concurrent two-way coupling of unknown fields across the immersed boundaries. The 3D test presents a case with an unequal number of equations, where the scalar field represents the convection of contaminant concentration. This provides more detailed physics in the local region and highlights its application in climate modeling and atmospheric sciences.

Variational Multiscale Discontinuous Galerkin (VMD↗
DOE OSTI2024

A protocol for model intercomparison of impacts of marine cloud brightening climate intervention

A modeling protocol (defined by a series of climate model simulations with specified model output) is introduced. Studies using these simulations are designed to improve the understanding of climate impacts using a strategy for climate intervention (CI) known as marine cloud brightening (MCB) in specific regions; therefore, the protocol is called MCB-REG (where REG stands for region). The model simulations are not intended to assess consequences of a realistic MCB deployment intended to achieve specific climate targets but instead to expose responses to interventions in six regions with pervasive cloud systems that are often considered candidates for such a deployment. A calibration step involving simulations with fixed sea surface temperatures (SSTs) is first used to identify a common forcing, and then coupled simulations with forcing in individual regions and combinations of regions are used to examine climate impacts. Synthetic estimates constructed by superposing responses from simulations with forcing in individual regions are considered a means of approximating the climate impacts produced when MCB interventions are introduced in multiple regions. A few results comparing simulations from three modern climate models (CESM2, E3SMv2, and UKESM1) are used to illustrate the similarities and differences between model behavior and the utility of estimates of MCB climate responses that were synthesized by summing responses introduced in individual regions. Cloud responses to aerosol injections differ substantially between models (CESM2 clouds appear much more susceptible to aerosol emissions than the other models), but patterns in precipitation and surface temperature responses were similar when forcing is imposed with similar amplitudes in the same regions. A previously identified La Niña-like response to forcing introduced in the Southeast Pacific is evident in this study, but the amplitude of the response was shown to markedly differ across the three models. Other common response patterns were also found and are discussed. Forcing in the Southeast Atlantic consistently (across all three models) produces weaker global cooling than that in other regions, and the Southeast Pacific and South Pacific show the strongest cooling. This indicates that the efficiency of a given intervention depends on not only the susceptibility of the clouds to aerosol perturbations, but also the strength of the underlying radiative feedbacks and ocean responses operating within each region. These responses were generally robust across models, but more studies and an examination of responses with ensembles would be beneficial.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Deep Learning Scene Classification Experiments in Automatic Detection of Slums on Planetscope Imagery

Population growth is increasingly happening in slum settlements of the large urban centers in the Global South. The term "slum" encompasses a wide range of communities, located mostly in underserved areas, and often exhibiting distinct structural and functional informalities with a relatively high concentration of marginalized populations. To address the issues confronting slums for effective planning and development, including the realistic estimation of the resident population, identifying them accurately is fundamental. Given the disagreements over a universal definition, diverse characteristic features, and socio-political limitations, global detection of slums is a veritable challenge. In this paper, we present experiments in slum detection using a scene classification algorithm and 3-meter spatial resolution satellite imagery. We train and evaluate the model for slum detection in Mumbai, India for the year 2023 and test the temporal generalization of the trained model on Mumbai in 2020 and 2018. In addition, we explore the pathways toward geographic generalization to Kolkata and Delhi (India). We discuss several limitations in the workflow and model, situate our findings in the existing literature, and suggest improvements and alternatives. With this, we establish baseline methods and experiments as a first step towards developing an image-based global slum detection framework and algorithm. This work adds to the community discussion on methods, data challenges, and open questions related to the detection of slums globally. With this research, we hope to improve our understanding of human settlements, especially in critical areas, improve population estimates, and help measure progress towards the sustainable development goals.

Arndt, Jacob↗
DOE OSTI2024

An iterative bidirectional gradient boosting approach for CVR baseline estimation

Here this paper presents a novel Iterative Bidirectional Gradient Boosting Model (IBi-GBM) for estimating the baseline of Conservation Voltage Reduction (CVR) programs. In contrast to many existing methods, we treat CVR baseline estimation as a missing data retrieval problem. The approach involves dividing the load and its corresponding temperature profiles into three periods: pre-CVR, CVR, and post-CVR. To restore the missing load profile during the CVR period, the method employs a three-step process. First, a forward-pass GBM is executed using data from the pre-CVR period as inputs. Subsequently, a backward-pass GBM is applied using data from the post-CVR period. The two restored load profiles are reconciled, considering pre-calculated weights derived from forecasting accuracy, and only the leftmost and rightmost points are retained. The newly restored points are then included as inputs for the subsequent iteration. This iterative procedure continues until the original load data in the CVR period is fully restored. We develop IBi-GBM using actual smart meter and Supervisory Control and Data Acquisition (SCADA) data. Our results demonstrate that IBi-GBM exhibits robust performance across various data resolutions and in different seasons and outperforms existing methods by achieving a 1-2% reduction in normalized Root Mean Square Error (nRMSE).

42 ENGINEERING↗
DOE OSTI2024

AI Driven Experiment Calibration and Control

One critical step on the path from data taking to physics analysis is calibration. For many experiments this step is both time consuming and computationally expensive. The AI Experimental Calibration and Control project seeks to address these issues, starting first with the GlueX Central Drift Chamber (CDC). We demonstrate the ability of a Gaussian Process to estimate the gain correction factor (GCF) of the GlueX CDC accurately, and also the uncertainty of this estimate. Using the estimated GCF, the developed system infers a new high voltage (HV) setting that stabilizes the GCF in the face of changing environmental conditions. This happens in near real time during data taking and produces data which are already approximately gain-calibrated, eliminating the cost of performing those calibrations which vary ±15% with fixed HV. We also demonstrate an implementation of an uncertainty aware system which exploits a key feature of a Gaussian process.

Britton, Thomas↗
DOE OSTI2025

Technical Background and Validation Report on the Residential Water Inhalation Risk Calculator Presented in the Risk Assessment Information System

Indoor air quality (IAQ) is critical for human health. Poor IAQ is linked to respiratory issues, cardiovascular diseases, and cancer. Indoor pollutants are emitted by typical household items such as cleaning products, personal care items, building materials, and tap water - an understudied volatile organic compound (VOC) source. This document presents the Residential Water Inhalation Risk Calculator (RWIRC), which estimates daily VOC exposure concentrations from various household water uses, such as showering and dishwashing, to assess exposure risks for the most vulnerable occupant. Integrated into the Risk Assessment Information System (RAIS) and sponsored by the US Department of Energy (DOE), the calculator divides a house into three compartments: shower, bathroom, and other spaces, accounting for daily water usage patterns and calculating VOC concentrations. Exposure data generated using the calculator can assist health assessors in estimating excess lifetime cancer risk (ELCR) and hazard index (HI) from VOC inhalation. Unlike traditional exposure models that utilize Andelman’s constant, the RWIRC continuously assesses variability in VOC concentrations and environmental conditions using differential equations to track VOC concentrations and air exchange between compartments. The calculator also provides unique volatilization fractions for each chemical and appliance, enhancing accuracy of the exposure concentration estimation. The RWIRC is accessible online and allows users to customize parameters (i.e., number of bathrooms, water temperature, and exhaust fan conditions) and input VOC characteristics (i.e., tap water and ambient air concentrations). This document provides a step-by-step guide on implementing the calculator. It also provides comparisons with the ATSDR-SHOWER calculator, using eight VOCs with varying physicochemical properties to reveal differences in algorithms and output concentrations. Simulations also assess how bathroom door positions and exhaust fan usage affect VOC exposure. The calculator results can enhance EPA risk screening levels for inhalation exposure to VOCs from tap water, offering a sophisticated tool for assessing inhalation risks and improving public health protection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Screening green solvents for multilayer plastic film recycling processes

Multilayer (ML) plastic films are essential packaging materials that help protect products from diverse external factors; however, only 5% of all ML films are recycled in the United States. Solvent-based technologies are a promising alternative for recycling ML films because they enable recovery of constituent polymer resins. For example, the Solvent Targeted Recovery and Precipitation (STRAPTM) process sequentially dissolves and separates polymer components using a series of targeted solvent washes. A crucial design aspect of this process is the impact of selected solvents on human health and on the environment. Here, this work introduces a computational framework that integrates molecular modeling, process modeling, techno-economic analysis (TEA), and life-cycle analysis (LCA) to quickly screen green solvents for solvent-based ML recycling processes. Initial screening for solvents based on selectivity is performed by estimating temperature-dependent solubilities using molecular-scale models. Subsequent screening uses basic estimates of energy use and octanol-water partition coefficients (logP) as key measures of health, safety, and environmental hazards. Detailed process modeling, TEA, and LCA are used on a reduced set of promising solvents identified in early screening steps to more accurately determine how solvent selection and associated operating conditions impact overall economics and environmental impacts. The framework is used for the identification of green solvents (from a database of 1,000 solvents) that separate an industrial ML film composed of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET). Our analysis shows the effectiveness of the framework and reveals fundamental trade-offs between solvent greenness, solubility, and economics. Our work emphasizes the importance of taking a holistic systems view during solvent design and aims to inform the development of new processes for ML film recycling and the identification of new ML films that are easier to recycle.

economics↗
DOE OSTI2025

Feedstock-efficient conversion through hydrogen and formate-driven metabolism in Escherichia coli

Product yields for biomanufacturing processes are often constrained by the tight coupling of cellular energy generation and carbon metabolism in sugar-based fermentation systems. To overcome this limitation, we engineered Escherichia coli to utilize hydrogen gas (H 2 ) and formate (HCOO - ) as alternative sources of energy and reducing equivalents, thereby decoupling energy generation from carbon metabolism. This approach enabled precise suppression of decarboxylative oxidation during acetate growth, with 86.6 ± 1.6 % of electrons from hydrogen gas (via soluble hydrogenase from Cupriavidus necator H16) and 98.4 ± 3.6 % of electrons from formate (via formate dehydrogenase from Pseudomonas sp. 101) offsetting acetate oxidation. Hydrogen gas supplementation led to a titratable and stoichiometric reduction in CO 2 evolution in acetate-fed cultures. Metabolomic analysis suggests that this metabolic decoupling redirects carbon flux through the glyoxylate shunt, partially bypassing two decarboxylative steps in the TCA cycle. Here, we demonstrated the utility of this strategy by applying it to mevalonate biosynthesis, where formate supplementation during glucose fermentation increased titers by 57.6 % in our best-performing strain. Flux balance analysis further estimated that 99.0 ± 2.8 % of electrons from formate were used to enhance mevalonate production. These findings highlight a broadly applicable strategy for enhancing biomanufacturing efficiency by leveraging external reducing power to optimize feedstock and energy use.

Biomanufacturing↗
DOE OSTI2024

Well‐to‐wheels analysis of greenhouse gas emissions for passenger vehicles in Middle East and North Africa

Battery electric vehicles (BEVs) are widely considered a pathway to achieve low carbon mobility. BEVs emit zero emissions from the tailpipe, but their life cycle carbon reduction compared to gasoline vehicles varies based on primary energy sources, electricity generation, and use efficiency. The Middle East and North Africa (MENA) region is an area rich in fossil fuels, meriting a detailed comparison between the emissions from BEV and other powertrains. We developed a MENA‐specific life cycle model that estimates well‐to‐wheel (WTW) greenhouse gas (GHG) emissions from passenger transport with internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs), plug‐in hybrid electric vehicles, and BEVs. MENA's average WTW GHG emissions for all supply chain steps including combustion emissions from vehicle operation are 767 g/kWh and 84 g CO 2 eq/MJ for electricity and gasoline, respectively, but are highly variable due to heterogeneity in upstream supply chains. The use of hybrid gasoline ICEVs provides the largest emission reduction opportunity for existing vehicle fleets in 9 of the 16 MENA countries. For these nine countries, replacing gasoline ICEVs with HEVs could, on average, reduce country‐level life cycle GHG emissions by 47%. There is a similar emission reduction opportunity for 14 of the 16 MENA countries when normalizing vehicle efficiencies irrespective of the powertrain shares and other trends in existing vehicle fleets. Future scenario analysis shows that BEVs would have the lowest WTW GHG emissions among all powertrains in most MENA countries only if significantly reduced electricity transmission losses and cleaner grid mix are realized, although a high cost of infrastructure developments is expected.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Floating Photovoltaic Technical Potential: A Novel Geospatial Approach on Federally Controlled Reservoirs in the United States

Floating photovoltaic generation is a rapidly expanding sector of the solar energy industry, and understanding the quantity that can feasibly be installed is a crucial step to understand its role in future energy systems. This paper presents a novel spatially explicit methology of FPV potential for federally owned and managed reservoirs in the United States that uses site-specific attributes of reservoirs to estimate available area and potential generation capacity. The analysis finds that the proportion reservoir area that is found to be available for FPV development is similar to assumed values used in previous research on average, however there is a wide variability in this proportion on a site by site basis. Potential FPV generation capacity on these reservoirs is estimated to be in the range of 861 to 1,042 GWdc depending on input assumptions, likely representing a significant portion of future US solar generation needs. This work represents an advancement in methods used to estimate FPV potential that presents many natural extensions for further research.

floating solar↗
DOE OSTI2025

Modeling the Impacts of Hydrogen Extraction on Anaerobic Fermentation Systems Using a Modified ADM1 Model

Here, this paper presents a modified ADM1 (mADM1) model for use in assessing the influence of active dissolved H 2 extraction on biogas production from anaerobic fermentation reactors, specifically in the context of high-strength brewery wastewater as the feed. The modified model adds regulation factors to account for the varying product stoichiometry of glucose degradation reactions as a function of H 2 concentration in anaerobic digestion, and incorporates the use of both lactate and ethanol as intermediates. The changes to the model are expected to better predict the effects of H 2 removal on the production of H 2 in fermentation processes. Both ADM1 and mADM1 were calibrated against experimental data from a fluidized-bed reactor containing encapsulated acidogenic-acetogenic microbial communities treating real brewery wastewater. The calibrated models were validated against another fluidized-bed reactor identical to the calibration reactor, with the addition of a hollow-fiber membrane module that was used to reduce dissolved H 2 concentrations in the validation reactor. It was found that ADM1 over-estimated the H 2 production rates of the validation reactor (117 mL/day simulated vs. 16.48 mL/day experimental), whereas mADM1 was able to successfully predict fermentation, and specifically the H 2 production rate (17 mL/day). The presented model is a first step towards a model that can predict the effects of dissolved H 2 removal on fermentation processes.

Anaerobic Digestion↗
DOE OSTI2025

bmdrc: Python package for quantifying phenotypes from chemical exposures with benchmark dose modeling

Though chemical exposures are known to potentially have negative impacts on health, including contributing to chronic diseases such as cancer, the quantitative contribution of risk is not fully understood for every chemical. A commonly used approach to quantify levels of risk is to measure the proportion of organisms (such as a total number of zebrafish on a plate or mice in a cage) with abnormal behavioral responses or morphology at increasing concentrations of chemical exposure. A particular challenge with processing the proportional data from these assays is the appropriate estimation of chemical concentration levels that result in malformations or acute toxicity, as these values typically vary between experimental measurements. The recommended approach by the Environmental Protection Agency (EPA) is to fit benchmark dose curves with specific filters and model fitting steps, which are crucial to properly processing the proportional data. Several tools exist for the fitting of benchmark dose response curves, but none are standalone Python libraries built to process both morphological and behavioral data as proportions with all the EPA recommended filters, filter parameters, models, and model parameters. Thus, here we present the benchmark dose response curve (bmdrc) Python library, which was built to closely follow these EPA guidelines with helpful visualizations of filters and fitted model curves, and reports for reproducibility purposes. bmdrc is open-source and has demonstrated utility as a support package to an existing web portal for information on chemicals (https://srp.pnnl.gov). Our package will support any toxicology analysis where the response is a proportional value at increasing levels of a concentration of a chemical or chemical mixture.

Superfund↗
DOE OSTI2025

Automated shaker placement and regularized input estimation for MIMO testing.

Multi-input, multi-output (MIMO) testing is used in component qualification to reproduce operational responses in the laboratory. It is often preferred to single-input and base-shake testing because of the potential for equivalent or better tests using smaller actuators and shorter test suites. Given a target response, two key steps in MIMO test design are selecting actuator locations and solving for input loads. Actuator locations are often manually selected using expert judgment. If an automatic method is used, locations are usually determined by simulating the vibration control problem and minimizing a combination of the input energy and control residuals. To select a configuration, the relative importance of input energy and residuals must be specified. Specifying relative weights is, in general, a manual and subjective process. This paper develops an objective function that compares actuator configurations based on control accuracy and required input energy without any manual parameter tuning. The objective function uses an optimally selected tradeoff parameter for each candidate configuration. To choose actuator locations using the new objective function, a pivoting algorithm for integer programming problems is developed. Starting with an initial configuration (such as the one generated by a greedy algorithm), the pivoting algorithm guarantees an objective function decrease in each iteration until convergence is reached. In a simulation featuring a structure excited by a diffuse acoustic field, electrodynamic shaker locations and regularized inputs are solved for without any analyst-specified parameters. Simulations are performed in MIMO configurations where the number of target responses is less than, equal to, and greater than the number of actuators.

Multi-input multi-output↗
DOE OSTI2024

A Carborane-Derived Proton-Coupled Electron Transfer Reagent

Reagents capable of concerted proton–electron transfer (CPET) reactions can access reaction pathways with lower reaction barriers compared to stepwise pathways involving electron transfer (ET) and proton transfer (PT). To realize reductive multielectron/proton transformations involving CPET, one approach that has shown recent promise involves coupling a cobaltocene ET site with a protonated arylamine Brønsted acid PT site. This strategy colocalizes the electron/proton in a matter compatible with a CPET step and net reductive electrocatalysis. To probe the generality of such an approach a class of C,C'-diaryl-ocarboranes is herein explored as a conceptual substitute for the cobaltocene subunit, with an arylamine linkage still serving as a colocalized Brønsted base suitable for protonation. The featured ocarborane (PhCbPh N ) can be reduced and protonated to generate an N–H bond with a weak effective bond dissociation free energy (BDFE eff ) of 31 kcal/mol, estimated with measured thermodynamic data. This N–H bond is among the lowest measured element–H bonds for analyzed nonmetal compounds. Distinct solid-state crystal structures of the one- and two-electron reduced forms of diaryl-o-carboranes are disclosed to gain insight into their well-behaved redox characteristics. The singly reduced, protonated form of the diaryl-o-carborane can mediate multi-ET/PT reductions of azoarenes, diphenylfumarate, and nitrotoluene. In contrast to the aforementioned cobaltocene system, available mechanistic data disclosed herein support these reactions occurring by a rate-limiting ET step and not a CPET step. A relevant hydrogen evolution reaction (HER) reaction was also studied, with data pointing to a PT/ ET/PT mechanism, where the reduced carborane core is itself highly stable to protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Discovering the Unknowns: A First Step

This article aims at discovering the unknown variables in the system through data analysis. The main idea is to use the time of data collection as a surrogate variable and try to identify the unknown variables by modeling gradual and sudden changes in the data. We use Gaussian process modeling and a sparse representation of the sudden changes to efficiently estimate the large number of parameters in the proposed statistical model. The method is tested on a realistic dataset generated using a one-dimensional implementation of a Magnetized Liner Inertial Fusion (MagLIF) simulation model, and encouraging results are obtained.

42 ENGINEERING↗