Search NASA⌕ Search

SEARCH · Search NASA

Results for “ethanol fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Production of 1,3-Butadiene from Renewable Feedstocks Ethanol and 1,3-Butanediol - CRADA 560 (Final Report)

1,3-butadiene is a commodity chemical currently produced from petroleum sources. Producing 1,3-butadiene from renewable resources will contribute to decarbonization, provide new green jobs, and reduce our dependance on oil. Development of multifunctional catalysts that are active, selective, and stable for this reaction has been an area of research and development. This effort reported here builds on our prior work for the 1-step conversion of ethanol to butadiene. The goal of the additional scope performed here was to accelerate the commercial deployment of sustainable butadiene production. We demonstrated that the PNNL Ag-based catalyst is significantly more active than the WWII-era catalyst when operated under the same conditions. A butadiene selectivity of 68% was obtained at 64% conversion for the production of butadiene from ethanol. It was found that ethanol feedstock is preferred over 1,3-butanediol feedstock to produce butadiene due to higher yield resulting in lower butadiene selling price (i.e., $\$$0.4-1.7/ lb). Production of 3.0 Liter of butadiene solution in hexane containing 100 grams of butadiene was achieved and delivered to Bridgestone for producing a butadiene-derived test piece.

09 BIOMASS FUELS↗
DOE OSTI2024

Production of drop-in biodiesel blendstocks via competitive acid-catalyzed dehydration reactions using ethanol oligomerization products

Ethanol can be converted into diesel fuel ethers using a three-step catalytic approach that involves ethanol oligomerization to larger alcohols, hydrogenolysis of the esters followed by dehydration of the C4 to C8 alcohols into ethers. In this paper we report results for the dehydration of a mixture of C4 – C8 alcohols using a zeolite Y catalyst in a continuous flow reactor. Mono-molecular dehydration of the alcohols produces olefins while bi-molecular dehydration of the alcohol produces ethers. Increasing the pressure increases the ether selectivity while decreasing the pressure produces more olefins. Linear alcohol feeds produce more C8+ ethers, while branched and secondary alcohols lead to more olefins. Olefin and coke selectivities increase with increasing carbon chain length of alcohols. Secondary alcohols lead to higher coke selectivities. Furthermore, ethanol/Butanol oligomerization experiments showed that the incoming dehydration feedstock can be grown to larger C6+ alcohol fractions, leading to higher yields of C10+ diesel-range ethers.

09 BIOMASS FUELS↗
DOE OSTI2025

Renewable diesel and bio-aromatics production from waste cooking oil using ethanol as a hydrogen donor in deoxygenation reaction

Biofuels offer a promising solution in the fight against climate change. With a global increase in waste cooking oil, this research investigated the production of bio-hydrogenated diesel (BHD) from waste cooking oil, using ethanol as a hydrogen donor in the deoxygenation process. A hydrolyzed waste cooking oil model compound served as the feedstock, and the deoxygenation was performed at 300–400 °C. The catalysts used in the experiments were 2.6 wt% Ni and 7.8 wt% Mo (2.6Ni-7.8Mo) and 10 wt% Ni and 5 wt% Mo (10Ni-5Mo) on γ-Al 2 O 3 . The results showed that ethanol is an effective hydrogen donor for biofuel production without the need for external hydrogen at an elevated pressure. The increasing temperature enhanced the free fatty acid (FFA) conversion and n-alkane selectivity in the oil product, with the highest FFA conversion and alkane selectivity of 100 % and 46 %, respectively, observed at 400 °C for the sulfided 10Ni-5Mo catalyst. On the other hand, 2.6Ni-7.8Mo offers 100 % FFA conversion with a lower n-alkane selectivity of 35 % at identical temperatures. The total acid number (TAN) of the oil products decreased from 174.03 mg KOH/g of feedstock to 9.43 and 8.67 mg KOH/g with the sulfided 2.6Ni-7.8Mo and 10Ni-5Mo catalysts, respectively. Both the catalysts achieved similar heating values (~43 MJ/kg) at 400 °C. This is a significant improvement to the HHV of the feedstock, which was 36.02 MJ/kg. Additionally, aromatic compounds, mainly BTXE (benzene, toluene, xylene, and ethylbenzene), were also produced. Compared to glycerol as a hydrogen donor, ethanol more effectively increased n-alkane selectivity due to its higher effective hydrogen-to-carbon ratio (H/C eff ). Conversely, glycerol was more advantageous for achieving greater selectivity towards BTXE compounds due to its lower H/C eff , which potentially leads to coke formation. Since aromatic compounds are intermediates in coke production, glycerol provides higher aromatic selectivity than ethanol. Finally, this study presents an alternative pathway for producing diesel fuel from waste cooking oil using ethanol as a hydrogen donor.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coprocessing Corn Germ Meal for Oil Recovery and Ethanol Production: A Process Model for Lipid-Producing Energy Crops

Efforts to engineer high-productivity crops to accumulate oils in their vegetative tissue present the possibility of expanding biodiesel production. However, processing the new crops for lipid recovery and ethanol production from cell wall saccharides is challenging and expensive. In a previous study using corn germ meal as a model substrate, we reported that liquid hot water (LHW) pretreatment enriched the lipid concentration by 2.2 to 4.2 fold. This study investigated combining oil recovery with ethanol production by extracting oil following LHW and simultaneous saccharification and co-fermentation (SSCF) of the biomass. Corn germ meal was again used to model the oil-bearing energy crops. Pretreated germ meal hydrolysate or solids (160 and 180 °C for 10 min) were fermented, and lipids were extracted from both the spent fermentation whole broth and fermentation solids, which were recovered by centrifugation and convective drying. Lipid contents in spent fermentation solids increased 3.7 to 5.7 fold compared to the beginning germ meal. The highest lipid yield achieved after fermentation was 36.0 mg lipid g−1 raw biomass; the maximum relative amount of triacylglycerol (TAG) was 50.9% of extracted oil. Although the fermentation step increased the lipid concentration of the recovered solids, it did not improve the lipid yields of pretreated biomass and detrimentally affected oil compositions by increasing the relative concentrations of free fatty acids.

09 BIOMASS FUELS↗
DOE OSTI2022

Modeling perennial bioenergy crops in the E3SM land model (ELMv2)

Perennial bioenergy crops are increasingly important for the production of ethanol and other renewable fuels, and as part of an agricultural system that alters the climate through its impact on biogeophysical and biogeochemical properties of the terrestrial ecosystem. Few earth system models (ESMs) represent such crops, however. In this study, we expand the Energy Exascale Earth System Model (E3SM) Land Model (ELMv2) to include perennial bioenergy crops with a high potential for mitigating climate change. We focus on high-productivity miscanthus and switchgrass, estimating various parameters associated with their different growth stages and performing a global sensitivity analysis to identify and optimize these parameters. The sensitivity analysis identifies five parameters associated with phenology, carbon/nitrogen allocation, stomatal conductance, and maintenance respiration as the most sensitive parameters for carbon and energy fluxes. We calibrated and validated the model against observations and found that the model closely captures the observed seasonality and the magnitude of carbon fluxes. The validated model represents the latent heat flux fairly well, but sensible heat flux for miscanthus is not well captured. Finally, we validated the model against observed leaf area index (LAI) and harvest amount and found modeled LAI captured observed seasonality , although the model underestimates LAI and harvest amount. This work provides a foundation for future ESM analyses of the interactions between perennial bioenergy crops and carbon, water, and energy dynamics in the larger earth system, and sets the stage for studying the impact of future biofuel expansion on climate and terrestrial systems.

09 BIOMASS FUELS↗
DOE OSTI2020

Enhanced multi-carbon alcohol electroproduction from CO via modulated hydrogen adsorption

Multi-carbon alcohols such as ethanol are valued as fuels in view of their high energy density and ready transport. Unfortunately, the selectivity toward alcohols in CO 2 /CO electroreduction is diminished by ethylene production, especially when operating at high current densities (>100 mA cm –2 ). Here we report a metal doping approach to tune the adsorption of hydrogen at the copper surface and thereby promote alcohol production. Using density functional theory calculations, we screen a suite of transition metal dopants and find that incorporating Pd in Cu moderates hydrogen adsorption and assists the hydrogenation of C 2 intermediates, providing a means to favour alcohol production and suppress ethylene. We synthesize a Pd-doped Cu catalyst that achieves a Faradaic efficiency of 40% toward alcohols and a partial current density of 277 mA cm –2 from CO electroreduction. The activity exceeds that of prior reports by a factor of 2.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Comprehensive Characterization of Mixed Metal Oxide Catalysts for Enhanced Catalyst Lifetime During Bio-Based C2-C6 Oxygenates to Olefins Processes (CRADA CRD-18-00728 Final Report)

Participant has developed mixed metal oxide (MMO) catalysts to selectively convert biomass-derived C2-C6 oxygenates to olefins and then hydrocarbon fuels to meet DOE 2022 fuel targets. Selective conversion ethanol to isobutylene with MMO catalysts (ZnOZrOx) requires low ethanol feeds to maintain performance. Increasing the feed results in rapid catalyst deactivation. Participant has increased catalyst stability by adding additional metal oxides. However, variations in performance based on the level and type of additive and catalytic conditions have been observed. This project will use advanced catalyst characterization methods through the ChemCatBio Advanced Catalyst Synthesis and Characterization (ACSC) project to gain insight into key catalyst features and deactivation modes with the goal of tailoring catalyst composition to improve performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Advancing Ethanol-to-Jet cost Effectiveness via direct conversion to n -Butene-Rich olefins and Co-Product Valorization

Ethanol is a promising feedstock for sustainable aviation fuel production; however, conventional routes face significant energy and cost challenges, particularly due to the ethanol dehydration step to ethylene. Here, this study leverages breakthrough experimental data to perform comprehensive techno-economic and life-cycle assessments of an innovative ethanol-to-jet process. The process employs a single-step catalytic conversion, enabled by multifunctional Cu-ZrO 2 /SBA-16 catalyst, to directly upgrade ethanol into a mixed olefin stream rich in n-butene. The single-step conversion eliminates the costly ethanol dehydration step in the conventional process. High selectivity toward n-butene offers key advantages: it simplifies downstream oligomerization into jet-range hydrocarbons and enables the co-production of renewable n-butene alongside sustainable aviation fuel. The analysis estimates a minimum fuel selling price as low as $\$$2.50 per gallon, whether using corn ethanol or cellulosic ethanol from corn stover. Life cycle CO 2 equivalent emissions are projected to be as low as 10.6 g CO 2 eq/MJ sustainable aviation fuel, representing over 70% reduction compared to conventional petroleum-based jet fuel. This one-step ethanol upgrading approach not only facilitates SAF and n-butene co-production but also provides operational flexibility. The ability to tailor product outputs allows the ethanol-to-jet process to adapt to varying feedstocks, incentive programs, and market dynamics, ultimately enhancing the economic viability of sustainable aviation fuel production.

Xu, Yiling [Pacific Northwest National Laboratory ↗
DOE OSTI2022

Reaction chemistry of ethanol oligomerization to distillate-range molecules using low loading Cu/Mg x AlO y catalysts

We study ethanol oligomerization to higher alcohols and other oxygenates with a 0.3 wt. %Cu/Mg 2.9 AlO catalyst. This reaction involves more than 130 products in a complicated reaction network. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at an ethanol conversion of ~70 %. Alcohol selectivity was found to follow Schultz-Flory distribution at all studied conversions. Larger sized alcohols then are formed mostly by chain-growth mechanisms via surface reactions of adsorbed oligomers with ethanol-based monomers. Higher esters are formed from alcohols and aldehydes in a series reaction mechanism. Moreover, C 6+ ester and C 4+ ketones selectivities increase as conversion increases. We also found that C 4+ alcohols most likely undergo Guerbet coupling with the studied catalyst to form even higher alcohols once, and that the oxygen of these alcohols is active as a nucleophile, resulting in the selective formation of esters if the starting alcohol is branched. Finally, we performed several cofeed studies varying ethanol-to-H 2 inlet partial pressures, and adding acetaldehyde and ethyl acetate as cofeeds to ethanol at different concentrations. Here, we conclude from these experiments that acetaldehyde concentration controls reaction chemistry, with conditions favoring larger concentrations of the molecule promoting both alcohol coupling and ester formation, and conditions leading to lower concentrations of acetaldehyde resulting in higher alcohol selectivity at the expense of esters and higher aldehydes.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Evaluation of erosion potential of bio-based multicomponent blendstocks using experimentally-validated computational fluid dynamics

The optimization of the fuel-engine interface and associated performance is a significant goal for CoOptima and the industry. The strategic driver for fuel-engine optimization is clear: diesel optimization can significantly reduce emissions including NOx, particulate matter, and CO2 emissions. Previous evaluations of ethanol and diesel blends raised significant concerns with fuel injector erosion using ethanol blends. While Sylvatex’s technology can use ethanol, it also utilizes a surfactant and water to compatibilize and modify ethanol blends, thereby controlling its impact in diesel engines. The results from the project will (1) provide important insights into complex fuels and erosion, which will be used to design additional, improved formulations; and (2) expand capabilities of Argonne’s cavitation-induced erosion risk assessment (CIERA) tool to model multi-component systems, furthering Co-Optima objectives.

09 BIOMASS FUELS↗
DOE OSTI2021

Experimental study of sprays with isooctane, hexane, ethanol and their binary mixtures under different flash boiling intensities

Here, this work investigated the behaviors of single-component and multi-component sprays under different flash boiling intensities. Isooctane, hexane, ethanol, isooctane-hexane, and isooctane-ethanol mixtures were used as test fuels. The pressure ratio of the ambient pressure over saturation pressure (R p ) was used as the indicator of the superheated degree. Macroscopic characteristics of the sprays under 10 different R p (1.1 to 0.14) were investigated using Diffused Backlight Imaging (DBI). Droplet size, which revealed the spray microscopic characteristics, was also investigated using Phase Doppler Anemometry (PDA). The results showed that ambient pressure reduction led to higher flash boiling intensity, significant spray morphology changes, and smaller droplet size, regardless of the fuel type and blend ratios. Spray collapse was observed for all sprays once R p dropped below 0.3. Spray collapse dramatically increased the liquid penetration length, expanded the near-field spray angle, and reduced the far-field angle for sprays with all the fuels. Fuel properties, such as the latent heat of vaporization, had significant impacts on droplet size distributions, thus altering the liquid penetration length and spray angles. Under similar R p , sprays with high ethanol content generally had larger droplet sizes compared with other fuel sprays due to the high latent heat of vaporization. The larger droplets caused the high ethanol content sprays to be more resistant to the plume trajectory change, resulting in a smaller far-field spray angle variations with changing R p . At R p of 0.28, sprays with the similar latent heat of vaporization have similar droplet sizes, and droplet sizes at different radial locations were also similar to each other.

42 ENGINEERING↗
DOE OSTI2021

Advanced Light-Duty Spark Ignition Engine Research: Co-Optimization of Fuels and Engines and Partnership to Advance Combustion Engines (FY2020 Annual Progress Report)

This report covers recent progress on research tasks that support both the Co-Optimization of Fuels and Engines (Co-Optima) initiative and the Partnership to Advance Combustion Engines (PACE) consortium. The Co-Optima tasks further the science-base needed by industry stakeholders to co-evolve the next generation of highly efficient direct injection spark ignition (DISI) engines and new gasoline-type fuels. The research emphasis is on fuel effects on multimode spark ignition (SI) engine operation, which uses traditional non-dilute stoichiometric operation for peak load and power but reverts to lean operation at lower loads to provide higher fuel economy. This work focuses on determining desirable fuel specifications in terms of well-established metrics like research octane number (RON) and motor octane number, but it also involves the assessment of new fuel metrics, including fuel sooting propensity and phi-sensitivity. The PACE task supports the development of predictive computational fluid dynamics (CFD) modeling, which promises to unlock new strategies for high-efficiency combustion while minimizing tailpipe emissions. Here, the primary fuel is a regular E10 gasoline (i.e., a regular gasoline blend containing 10% ethanol), and focus is on fuel-spray dynamics and soot emissions. Soot-formation pathways are studied to determine how the pathways change with injection strategies and the thermal state of the engine (i.e., cold-starting vs. fully warmed-up operation). This PACE task also contributed to the development of an optimal E10 gasoline surrogate fuel, as reported in detail elsewhere

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis project has shed light on system interactions within the biomass-to-biofuel supply chain for the past 15 years. This presentation highlights recent analyses on investment and policy scenarios for sustainable aviation fuel, the economic and policy considerations for the historical buildout of the starch ethanol industry, and the potential impact of U.S. Department of Energy investment in bioenergy R&D.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Life cycle greenhouse gas emissions of ethanol produced via fermentation of sugars derived from shrub willow (Salix ssp.) hot water extraction in the Northeast United States

Abstract Background The amount of carbon dioxide in the atmosphere has been on the rise for more than a century. Bioenergy crops are seen by the Intergovernmental Panel on Climate Change as an essential part of the solution to addressing climate change. To understand the potential impact of shrub willow ( Salix spp . ) crop in the northeast United States, effective and transparent life cycle assessment of these systems needs to occur. Results Here we show, ethanol produced from the fermentation of sugars from hot water extract of willow grown on cropland can sequester 0.012 ± 0.003 kg CO 2eq MJ −1 for a supply system incorporating summer harvest and storage. Despite decreases in soil organic carbon when willow is instead grown on grassland, the produced fuel still can provide significant climate benefits compared to gasoline. Conclusions Shrub willow converted to ethanol can be a carbon negative source of transportation fuel when the electricity and heat required for the conversion process are generated from renewable biomass. The sequestration of carbon in the belowground portion of the plants is essential for the negative GHG balance for cropland and low GHG emissions in grassland.

10 SYNTHETIC FUELS↗
DOE OSTI2021

Deconstruction of Woody Biomass via Protic and Aprotic Ionic Liquid Pretreatment for Ethanol Production

Ionic liquids (ILs) have emerged as important solvents for conversion of lignocellulosic feedstocks to fuels and chemicals due to their ability to enable efficient biomass deconstruction and fractionation. Woody biomass derived from forest and agricultural residues has the potential to be used for production of biofuels and its removal from forests can help mitigate disastrous wildfires in fire-prone states like California. This study evaluated woody biomass types (pine, almond, walnut, and fir) from California as potential biofuel feedstocks. The feedstocks were pretreated with the ILs cholinium lysinate ([Ch][Lys]) and ethanolamine acetate ([EOA][OAc]), followed by enzymatic hydrolysis and fermentation of lignocellulosic sugars to produce ethanol. Under optimal conditions, [EOA][OAc] pretreatment and enzymatic hydrolysis generated glucose and xylose yields in the range of 24-82 and 14-80%, respectively, while glucose and xylose yields for the [Ch][Lys] ranged between 28-83 and 23-80%, respectively. Maximum fermentable sugar was released from almond wood, and the lowest amount was from pine and fir. Further, blends of feedstocks were also explored, and a blend with a mass ratio of 2/2/1 (almond/walnut/pine) resulted in maximum glucose and xylose (>90%) yields using [Ch][Lys]. Fermentation of this hydrolysate using a C5-utilizing strain of Saccharomyces cerevisiae resulted in a maximum ethanol concentration of 17.9 g/L for mixture biomass hydrolysate, corresponding to 60.8% fermentation efficiency. This study represents the first demonstration of the use of these ILs for pretreatment of woody biomass blends that resulted in a high overall conversion efficiency for ethanol production.

09 BIOMASS FUELS↗
DOE OSTI2022

Model development for flash boiling spray and validations with isooctane, hexane, ethanol and their binary mixtures

The objective of this study is to develop a comprehensive model for spray atomization under the consideration of flash boiling, which includes nucleation, bubble growth, and droplet breakup. Although flash boiling has been previously studied, there is still no well-established analytical and numerical model of their mechanisms, or general guidelines on the implementation of this atomization strategy. In this study, detailed formulations are elaborated for the unified spray atomization model under both non-flash and flash boiling conditions. Next, the model was implemented into CFD software and 3-D simulations were performed for model validations. Two fuel blends are tested: ethanol-isooctane blends and hexane-isooctane blends. Simulation results were compared with the experimental measurements conducted using two methodologies, DBI (Diffuse Backlight Imaging) system for spray images captured by a high-speed camera, and a PDA (Phase Doppler Anemometry) system for droplet size measurement during the spray injection process. It was found that the current flash boiling model can accurately capture the spray characteristics under different environment conditions, such as the spray plume interactions and liquid penetration. The averaged Sauter mean diameter (SMD) calculations match the measurement sufficiently well. The spray structures for both single- and multi-component fuels during the injection process are well represented by current model.

42 ENGINEERING↗