Search NASA⌕ Search

SEARCH · Search NASA

Results for “foundation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Computational flow development for unsteady viscous flows: Foundation of the numerical method

A procedure is presented for effective consideration of viscous effects in computational development of high Reynolds number flows. The procedure is based on the interpretation of the Navier-Stokes equations as vorticity transport equations. The physics of the flow was represented in a form suitable for numerical analysis. Lighthill's concept for flow development for computational purposes was adapted. The vorticity transport equations were cast in a form convenient for computation. A statement for these equations was written using the method of weighted residuals and applying the Galerkin criterion. An integral representation of the induced velocity was applied on the basis of the Biot-Savart law. Distribution of new vorticity, produced at wing surfaces over small computational time intervals, was assumed to be confined to a thin region around the wing surfaces.

Bratanow, T.↗
NASA NTRS1978

A three-dimensional model of corotating streams in the solar wind. 1: Theoretical foundations

The theoretical and mathematical background pertinent to the study of steady, corotating solar wind structure in all three spatial dimensions (3-D) is discussed. The dynamical evolution of the plasma in interplanetary space (defined as the region beyond roughly 35 solar radii where the flow is supersonic) is approximately described by the nonlinear, single fluid, polytropic (magneto-) hydrodynamic equations. Efficient numerical techniques for solving this complex system of coupled, hyperbolic partial differential equations are outlined. The formulation is inviscid and nonmagnetic, but methods allow for the potential inclusion of both features with only modest modifications. One simple, highly idealized, hydrodynamic model stream is examined to illustrate the fundamental processes involved in the 3-D dynamics of stream evolution. Spatial variations in the rotational stream interaction mechanism were found to produce small nonradial flows on a global scale that lead to the transport of mass, energy, and momentum away from regions of relative compression and into regions of relative rarefaction.

Pizzo, V. J.↗
NASA NTRS1978

Solar electric propulsion for the Halley's Comet rendezvous mission - Foundation for future missions

Long range and long duration space missions require an inexpensive and powerful means of propulsion. Solar Electric Propulsion (SEP) is considered in terms of cost effectiveness and its present state of the art. An ion propulsion system is described, which will employ solar collectors (preferably bi-flat) to generate an electric current to operate an ion thruster. The expulsion of mercury, and later, argon, ions will provide the impulse to move the spacecraft. SEP in the range of 18-60 kW, and spacecraft velocities of up to 30 km/s are discussed with reference to future exploratory missions, including: asteroid and comet rendezvous, Mars sample return, planetary orbiters, and out-of-the-ecliptic space flight. SEP applicability to earth-orbital missions is also discussed, with attention to its effectiveness in moving large objects, e.g., satellite power stations, from LEO to GEO.

Austin, R. E.↗
NASA NTRS1978

A three-dimensional model of corotating streams in the solar wind. I - Theoretical foundations

The paper is concerned with the development of the theoretical and mathematical background pertinent to the study of steady, corotating solar wind structure in all three spatial dimensions. The dynamical evolution of the plasma in interplanetary space (defined as the region beyond roughly 35 Rs where the flow is supersonic) is approximately described by the nonlinear, single-fluid, polytropic magnetohydrodynamic or hydrodynamic equations. Efficient numerical techniques are outlined for solving this complex system of coupled, hyperbolic partial differential equations. The present formulation is inviscid and nonmagnetic, but the methods used allow for the potential inclusion of both features with only modest modifications. A simple, highly idealized hydrodynamic model stream is examined to illustrate the fundamental processes involved in the three-dimensional dynamics of stream evolution. It is found that spatial variations in the rotational stream interaction mechanism produce small nonradial flows on a global scale that lead to the transport of mass, energy, and momentum away from regions of relative compression and into regions of relative rarefaction. Comparison with simpler models demonstrates the essential nonlinear, multidimensional nature of the interplanetary dynamics.

Pizzo, V.↗
NASA NTRS1980

Theory of electromagnetic transmission structures. I - Relativistic foundation and network formalisms

A new theorem on a class of four-dimensional skew-symmetric tensors is demonstrated. Coupled with the relativistic covariant form of Maxwell's equations, this theorem consolidates the classifications of guided waves by combining the three types - TE, TM, TEM - under a uniform condition applied to the generating four-potential which is Lorentz invariant. Each type corresponds to a potential of which a pair of the four components vanishes in a particular frame. Through appropriate normalization conditions, the resulting time-domain equations for the field amplitudes are readily reduced to modified telegraphist equations, which in turn lead to distributed network representations for each of the three types. The ambiguity of distributed network formalisms in general is elucidated and the concept of network parameter densities such as traditionally employed in TEM transmission line theory is questioned.

Gabriel, G. J.↗
NASA NTRS1980

Theoretical foundations for quantitative paleogenetics. III - The molecular divergence of nucleic acids and proteins for the case of genetic events of unequal probability

Theoretical equations are derived for molecular divergence with respect to gene and protein structure in the presence of genetic events with unequal probabilities: amino acid and base compositions, the frequencies of nucleotide replacements, the usage of degenerate codons, the distribution of fixed base replacements within codons and the distribution of fixed base replacements among codons. Results are presented in the form of tables relating the probabilities of given numbers of codon base changes with respect to the original codon for the alpha hemoglobin, beta hemoglobin, myoglobin, cytochrome c and parvalbumin group gene families. Application of the calculations to the rabbit alpha and beta hemoglobin mRNAs and proteins indicates that the genes are separated by about 425 fixed based replacements distributed over 114 codon sites, which is a factor of two greater than previous estimates. The theoretical results also suggest that many more base replacements are required to effect a given gene or protein structural change than previously believed.

Holmquist, R.↗
NASA NTRS1980

PASCO: Structural panel analysis and sizing code, capability and analytical foundations

A computer code denoted PASCO which can be used for analyzing and sizing uniaxially-stiffened composite panels is described. Buckling and vibration analyses are carried out with a linked-plate analysis computer code denoted VIPASA, which is incorporated in PASCO. Sizing is based on nonlinear mathematical programming techniques and employs a computer code denoted CONMIN, also incorporated in PASCO. Design requirements considered are initial buckling, material strength, stiffness, and vibration frequency. The capability of the PASCO computer code and the approach used in the structural analysis and sizing are described.

Stroud, W. J.↗
NASA NTRS1983

Evaluation of Antenna Foundation Elastic Modulus

An experiment to measure the elastic deflection of the DSS 14 concrete pedestal under the weight of the antenna was conducted in February 1983 and is compared to a similiar experiment made in 1968. Comparison of the results confirms the decrease in elastic modulus measured on core samples recently taken from the pedestal.

Mcginness, H.↗
NASA NTRS1978

A solution procedure for behavior of thick plates on a nonlinear foundation and postbuckling behavior of long plates

Approximate solutions for three nonlinear orthotropic plate problems are presented: (1) a thick plate attached to a pad having nonlinear material properties which, in turn, is attached to a substructure which is then deformed; (2) a long plate loaded in inplane longitudinal compression beyond its buckling load; and (3) a long plate loaded in inplane shear beyond its buckling load. For all three problems, the two dimensional plate equations are reduced to one dimensional equations in the y-direction by using a one dimensional trigonometric approximation in the x-direction. Each problem uses different trigonometric terms. Solutions are obtained using an existing algorithm for simultaneous, first order, nonlinear, ordinary differential equations subject to two point boundary conditions. Ordinary differential equations are derived to determine the variable coefficients of the trigonometric terms.

Stein, M.↗
NASA NTRS1984

Geographic Distribution of Wetland Parameters: the Foundation of a Data Base

Few quantitative estimates exist concerning the large fluxes of various materials between wetlands and adjacent bodies of water and the atmosphere. Three areas research were identified which will aid in the quantitative assessment of wetland biogeochemical processes: (1) geographic distribution of wetland parameters, (2) the processes involved in wetland material fluxes, and (3) the extrapolation of local measurements of material fluxes and storage to large geographic areas.

Source record↗
NASA NTRS1983

Cumulus clouds - Interactions between laboratory experiments and observations as foundations for models

Early Woods Hole cumulus observations conducted with the aid of an aircraft suggested that buoyancy dilution by entrainment was a major brake upon tropical cumulus growth. The mechanism by which entrainment occurred, however, was not well understood. Ludlam and Scorer (1953) postulated that buoyant bubbles were the building blocks of cumulus clouds and that it was aerodynamic drag which caused the tops to cease rising. The present investigation is concerned with laboratory experiments and analyses which have been conducted to clarify remaining questions. Attention is given to bubbles in water of uniform density, bubbles released into stably stratified fluids, bubbles released into a two-layer fluid, some observational questions, and buoyant plumes and thermals. The considered experiments provide some insight concerning the mechanism involved in the conversion of buoyancy into motion, taking into account a simpler fluid situation.

Simpson, J.↗
NASA NTRS1986

Statistical foundation of the fluid analogue of the soliton formalism

A fully nonlinear analysis is used to develop a general soliton formalism for the description of the nonlinear evolution of soliton fluctuations in both plasmas and classical fluids. From the Navier-Stokes equations for plasmas and compressible fluids of two scales, two equations for the propagation of density waves are derived. A fast soliton field is spontaneously created by rarefaction, and a slow density wave modulates the field intensity as a ponderomotive force. Constitutive properties are demonstrated using a Lagrangian-kinetic formalism of the fluctuation-dissipation theory.

Tchen, C. M.↗
NASA NTRS1987

Geometric foundations of the theory of feedback equivalence

A description of feedback control is presented within the context of differential equations, differential geometry, and Lie theory. Work related to the integration of differential geometry with the control techniques of feedback linearization is summarized. Particular attention is given to the application of the theory of vector field systems. Feedback invariants for control systems in state space form are also addressed.

Hermann, R.↗
NASA NTRS1989

Calculation of double-lunar swingby trajectories: I. Keplerian foundation

Scientific satellites may require translunar orbits aligned with the Sun-Earth line, with most of the period spent in either the sunward or antisunward direction. To maintain alignment, the orbit's line of apsides must rotate at a rate equal to mean angular motion of the Earth about the Sun. To maintain this rotation of the line of apsides by use of fuel onboard the spacecraft is prohibitively expensive. Farquhar and Dunham proposed a method for maintaining the desired alignment by gaining momentum at the expense of the Moon during a close approach (a lunar swingby) as the spacecraft passes beyond lunar orbit, then returning the momentum at the second lunar swingby as the spacecraft returns within the lunar orbit. The cycle of double-lunar swingbys may then be repeated. Dunham presented the orbit parameters necessary to achieve double-lunar swingby orbits which will maintain Sun-Earth line alignment. The details of the Keplerian approach to calculation of these parameters are presented. Methods for solution of the necessary equations for these parameters are presented.

Stalos, Stephen↗
NASA NTRS1989

Methodology for automating software systems. Task 1 of the foundations for automating software systems

The early stages of a research program designed to establish an experimental research platform for software engineering are described. Major emphasis is placed on Computer Assisted Software Engineering (CASE). The Poor Man's CASE Tool is based on the Apple Macintosh system, employing available software including Focal Point II, Hypercard, XRefText, and Macproject. These programs are functional in themselves, but through advanced linking are available for operation from within the tool being developed. The research platform is intended to merge software engineering technology with artificial intelligence (AI). In the first prototype of the PMCT, however, the sections of AI are not included. CASE tools assist the software engineer in planning goals, routes to those goals, and ways to measure progress. The method described allows software to be synthesized instead of being written or built.

Moseley, Warren↗
NASA NTRS1990

Foundations of measurement and instrumentation

The user of instrumentation has provided an understanding of the factors that influence instrument performance, selection, and application, and of the methods of interpreting and presenting the results of measurements. Such understanding is prerequisite to the successful attainment of the best compromise among reliability, accuracy, speed, cost, and importance of the measurement operation in achieving the ultimate goal of a project. Some subjects covered are dimensions; units; sources of measurement error; methods of describing and estimating accuracy; deduction and presentation of results through empirical equations, including the method of least squares; experimental and analytical methods of determining the static and dynamic behavior of instrumentation systems, including the use of analogs.

Warshawsky, Isidore↗
NASA NTRS1989

A preliminary design of interior structure and foundation of an inflatable lunar habitat

A preliminary structural design and analysis of an inflatable habitat for installation on the moon was completed. The concept takes the shape of a sphere with a diameter of approximately 16 meters. The interior framing provides five floor levels and is enclosed by a spherical air-tight membrane holding an interior pressure of 14.7 psi (101.4kpa). The spherical habitat is to be erected on the lunar surface with the lower one third below grade and the upper two thirds covered with a layer of lunar regolith for thermal insulation and shielding against radiation and meteoroids. The total dead weight (earth weight) of the structural aluminum, which is of vital interest for the costly space transportation, is presented. This structural dead weight represents a preliminary estimate without including structural details. The design results in two versions: one supports the weight of the radiation shielding in case of deflation of the fabric enclosure and the other assumes that the radiation shielding is self supporting. To gain some indication of the amount of structural materials needed if the identical habitat were installed on Mars and Earth, three additional design versions were generated where the only difference is in gravity. These additional design versions are highly academic since the difference will be much more than in gravity alone. The lateral loading due to dust storms on Mars and wind loads on Earth are some examples. The designs under the lunar gravity are realistic. They may not be adequate for final material procurement and fabrication, however, as the connection details, among other reasons, may effect the sizes of the structural members.

Yin, Paul K.↗