Search NASA⌕ Search

SEARCH · Search NASA

Results for “freeze”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Effect of Microgravity on Material Undergoing Melting and Freezing: the TES Experiment

This experiment is the first to melt and freeze a high temperature thermal energy storage (TES) material under an extended duration of microgravity. It is one of a series to validate an analytical computer program that predicts void behavior of substances undergoing phase change under microgravity. Two flight experiments were launched in STS-62. The first, TES-1, containing lithium fluoride in an annular volume, performed flawlessly in the 22 hours of its operation. Results are reported in this paper. A software failure in TES-2 caused its shutdown after 4 seconds. A computer program, TESSIM, for thermal energy storage simulation is being developed to analyze the phenomena occurring within the TES containment vessel. The first order effects, particularly the surface tension forces, have been incorporated into TESSIM. TESSIM validation is based on two types of results. First is the temperature history of various points of the containment structure, and second, upon return from flight, the distribution of the TES material within the containment vessel following the last freeze cycle. The temperature data over the four cycles showed a repetition of results over the third and fourth cycles. This result is a confirmation that any initial conditions prior to the first cycle had been damped out by the third cycle. The TESSIM simulation showed a close comparison with the flight data. The solidified TES material distribution within the containment vessel was obtained by a tomography imaging process. The frozen material was concentrated toward the colder end of the annular volume. The TESSIM prediction showed the same pattern. With the general agreement of TESSIM and the data, a computerized visual representation can be shown which accurately shows the movement and behavior of the void during the entire freezing and melting cycles.

Namkoong, David↗
NASA NTRS1994

Composition and freezing of aqueous H2SO4/HNO3 solutions under polar stratospheric conditions

The results of laboratory investigations of the freezing behavior of aqueous acid solutions indicate that in the stratosphere H2SO/H2O aerosol droplets would not freeze at temperatures above the ice frost point in the absence of HNO3; however, in the presence of typical levels of HNO3 liquid sulfuric acid aerosols take up significant amounts of HNO3 and H2O vapors and freeze much more readily. This is a consequence of the very rapid change in composition of the liquid droplets as the temperature drops to within two to three degrees of the equilibrium temperature at which HNO3 and H2O vapors would co-condense to form a liquid solution. In the high latitude stratosphere this HNO3/H2O 'dew point' is typically around 192-194 K at 100 mbar.

Beyer, K. D.↗
NASA NTRS1999

Modeling the Freezing of SN in High Temperature Furnaces

Presently, crystal growth furnaces are being designed that will be used to monitor the crystal melt interface shape and the solutal and thermal fields in its vicinity during the directional freezing of dilute binary alloys, To monitor the thermal field within the solidifying materials, thermocouple arrays (AMITA) are inserted into the sample. Intrusive thermocouple monitoring devices can affect the experimental data being measured. Therefore, one objective of this work is to minimize the effect of the thermocouples on the data generated. To aid in accomplishing this objective, two models of solidification have been developed. Model A is a fully transient, one dimensional model for the freezing of a dilute binary alloy that is used to compute temperature profiles for comparison with measurements taken from the thermocouples. Model B is a fully transient two dimensional model of the solidification of a pure metal. It will be used to uncover the manner in which thermocouple placement and orientation within the ampoule breaks the longitudinal axis of symmetry of the thermal field and the crystal-melt interface. Results and conclusions are based on the comparison of the models with experimental results taken during the freezing of pure Sn.

Brush, Lucien↗
NASA NTRS1990

Macromolecular differentiation of Golgi stacks in root tips of Arabidopsis and Nicotiana seedlings as visualized in high pressure frozen and freeze-substituted samples

The plant root tip represents a fascinating model system for studying changes in Golgi stack architecture associated with the developmental progression of meristematic cells to gravity sensing columella cells, and finally to "young" and "old", polysaccharide-slime secreting peripheral cells. To this end we have used high pressure freezing in conjunction with freeze-substitution techniques to follow developmental changes in the macromolecular organization of Golgi stacks in root tips of Arabidopsis and Nicotiana. Due to the much improved structural preservation of all cells under investigation, our electron micrographs reveal both several novel structural features common to all Golgi stacks, as well as characteristic differences in morphology between Golgi stacks of different cell types. Common to all Golgi stacks are clear and discrete differences in staining patterns and width of cis, medial and trans cisternae. Cis cisternae have the widest lumina (approximately 30 nm) and are the least stained. Medial cisternae are narrower (approximately 20 nm) and filled with more darkly staining products. Most trans cisternae possess a completely collapsed lumen in their central domain, giving rise to a 4-6 nm wide dark line in cross-sectional views. Numerous vesicles associated with the cisternal margins carry a non-clathrin type of coat. A trans Golgi network with clathrin coated vesicles is associated with all Golgi stacks except those of old peripheral cells. It is easily distinguished from trans cisternae by its blebbing morphology and staining pattern. The zone of ribosome exclusion includes both the Golgi stack and the trans Golgi network. Intercisternal elements are located exclusively between trans cisternae of columella and peripheral cells, but not meristematic cells. In older peripheral cells only trans cisternae exhibit slime-related staining. Golgi stacks possessing intercisternal elements also contain parallel rows of freeze-fracture particles in their trans cisternal membranes. We propose that intercisternal elements serve as anchors of enzyme complexes involved in the synthesis of polysaccharide slime molecules to prevent the complexes from being dragged into the forming secretory vesicles by the very large slime molecules. In addition, we draw attention to the similarities in composition and apparent site of synthesis of xyloglucans and slime molecules.

NASA Program Space Biology↗
NASA NTRS2006

Homogeneous Aerosol Freezing in the Tops of High-Altitude Tropical Cumulonimbus Clouds

Numerical simulations of deep, intense continental tropical convection indicate that when the cloud tops extend more than a few kilometers above the liquid water homogeneous freezing level, ice nucleation due to freezing of entrained aqueous sulfate aerosols generates large concentrations of small crystals (diameters less than approx. equal to 20 micrometers). The small crystals produced by aerosol freezing have the largest impact on cloud-top ice concentration for convective clouds with strong updrafts but relatively low aerosol concentrations. An implication of this result is that cloud-top ice concentrations in high anvil cirrus can be controlled primarily by updraft speeds in the tops of convective plumes and to a lesser extent by aerosol concentrations in the uppermost troposphere. While larger crystals precipitate out and sublimate in subsaturated air below, the population of small crystals can persist in the saturated uppermost troposphere for many hours, thereby prolonging the lifetime of remnants from anvil cirrus in the tropical tropopause layer.

Jensen, E. J.↗
NASA NTRS2007

Freeze Tape Casting of Functionally Graded Porous Ceramics

Freeze tape casting is a means of making preforms of ceramic sheets that, upon subsequent completion of fabrication processing, can have anisotropic and/or functionally graded properties that notably include aligned and graded porosity. Freeze tape casting was developed to enable optimization of the microstructures of porous ceramic components for use as solid oxide electrodes in fuel cells: Through alignment and grading of pores, one can tailor surface areas and diffusion channels for flows of gas and liquid species involved in fuel-cell reactions. Freeze tape casting offers similar benefits for fabrication of optimally porous ceramics for use as catalysts, gas sensors, and filters.

Sofie, Stephen W.↗
NASA NTRS2004

Freeze-Tolerant Condensers

Two condensers designed for use in dissipating heat carried by working fluids feature two-phase, self-adjusting configurations such that their working lengths automatically vary to suit their input power levels and/or heat-sink temperatures. A key advantage of these condensers is that they can function even if the temperatures of their heat sinks fall below the freezing temperatures of their working fluids and the fluids freeze. The condensers can even be restarted from the frozen condition. The top part of the figure depicts the layout of the first condenser. A two-phase (liquid and vapor) condenser/vapor tube is thermally connected to a heat sink typically, a radiatively or convectively cooled metal panel. A single-phase (liquid) condensate-return tube (return artery) is also thermally connected to the heat sink. At intervals along their lengths, the condenser/vapor tube and the return artery are interconnected through porous plugs. This condenser configuration affords tolerance of freezing, variable effective thermal conductance (such that the return temperature remains nearly constant, independently of the ultimate sink temperature), and overall pressure drop smaller than it would be without the porous interconnections. An additional benefit of this configuration is that the condenser can be made to recover from the completely frozen condition either without using heaters, or else with the help of heaters much smaller than would otherwise be needed. The second condenser affords the same advantages and is based on a similar principle, but it has a different configuration that affords improved flow of working fluid, simplified construction, reduced weight, and faster recovery from a frozen condition.

Crowley, Christopher J.↗
NASA NTRS2013

A Multi-Environment Thermal Control System With Freeze-Tolerant Radiator

Future space exploration missions require advanced thermal control systems (TCS) to dissipate heat from spacecraft, rovers, or habitats operating in environments that can vary from extremely hot to extremely cold. A lightweight, reliable TCS is being developed to effectively control cabin and equipment temperatures under widely varying heat loads and ambient temperatures. The system uses freeze-tolerant radiators, which eliminate the need for a secondary circulation loop or heat pipe systems. Each radiator has a self-regulating variable thermal conductance to its ambient environment. The TCS uses a nontoxic, water-based working fluid that is compatible with existing lightweight aluminum heat exchangers. The TCS is lightweight, compact, and requires very little pumping power. The critical characteristics of the core enabling technologies were demonstrated. Functional testing with condenser tubes demonstrated the key operating characteristics required for a reliable, freeze-tolerant TCS, namely (1) self-regulating thermal conductance with short transient responses to varying thermal loads, (2) repeatable performance through freeze-thaw cycles, and (3) fast start-up from a fully frozen state. Preliminary coolant tests demonstrated that the corrosion inhibitor in the water-based coolant can reduce the corrosion rate on aluminum by an order of magnitude. Performance comparison with state-of-the-art designs shows significant mass and power saving benefits of this technology.

Chen, Weibo↗
NASA NTRS2011

Fluid Line Evacuation and Freezing Experiments for Digital Radiator Concept

The digital radiator technology is one of three variable heat rejection technologies being investigated for future human-rated NASA missions. The digital radiator concept is based on a mechanically pumped fluid loop with parallel tubes carrying coolant to reject heat from the radiator surface. A series of valves actuate to start and stop fluid flow to di erent combinations of tubes, in order to vary the heat rejection capability of the radiator by a factor of 10 or more. When the flow in a particular leg is stopped, the fluid temperature drops and the fluid can freeze, causing damage or preventing flow from restarting. For this reason, the liquid in a stopped leg must be partially or fully evacuated upon shutdown. One of the challenges facing fluid evacuation from closed tubes arises from the vapor generated during pumping to low pressure, which can cause pump cavitation and incomplete evacuation. Here we present a series of laboratory experiments demonstrating fluid evacuation techniques to overcome these challenges by applying heat and pumping to partial vacuum. Also presented are results from qualitative testing of the freezing characteristics of several different candidate fluids, which demonstrate significant di erences in freezing properties, and give insight to the evacuation process.

human space flight↗
NASA NTRS2019

The Effect of Solution Chemistries and Freezing Temperatures on the Morphology of Cryogenic Opal-A (COA): Implications for Past Climates on Mars

Cryogenic opal-A (COA) is a type of hydrated amorphous silica that forms when silica-rich geothermal fluids erupt sub-aerially and are exposed to air temperatures below 0 °C. As the fluid cools and water-ice forms, the solution increases in ionic strength and reaches saturation of opal-A. This results in the precipitation of opal-A between water ice crystals. Natural COA is found embedded within frozen fluids near hydrothermal sources, and has been shown to preserve signs of biological activity. In this study, two solution chemistries (hydrochloric acid (HCl) and sulfuric acid (H2SO4)) and three freezing temperatures (-20, -80, -196 ºC) were used to synthesize COA in the lab. SEM analyses showed that COA frozen at -20 ºC in HCl solutions produced smooth silica branches similar to what was observed in previous studies. COA precipitated at lower freezing temperatures demonstrated progressively smaller particle sizes and unique morphologies such as halite dendrites within silica, desiccation cracks, and pores. COA made in H2SO4 solutions was more angular and fragmented than COA made in HCl solutions. Particle size also decreased with decreasing freezing temperature. COA textures have implications for terrestrial samples as well as future samples returned from Mars because they can provide information about past climate and fluid chemistry.

J V Hogancamp↗
NASA NTRSDate not supplied

3D Phase-Field Simulations of Pattern Formation During Freeze Casting

We present the results of a combined experimental and phase-field modeling study of pattern formation during freeze casting. Those studies use unidirectional freezing of simple binary liquid mixtures of water and sugars (sucrose and trehalose) in a temperature gradient, which suffice to produce hierarchical templated structures similar to those observed in more complex multi-component freeze-cast systems including lamellae, undulated ridges, and more exotic “jellyfish-like” substructures. Multiscale 3D phase-field simulations reproduce remarkably well those structures quantitatively and identify key properties of the ice-water interface that control their formation. They further reveal that lamellae form as a result of a novel symmetry-breaking secondary instability of partially faceted cellular structures and pinpoint additional secondary instability mechanisms giving rise to smaller-scale substructures.

Kaihua Ji↗
NASA NTRSDate not supplied

3D Phase-Field Simulations of Pattern Formation During Freeze Casting

We present the results of a combined experimental and phase-field modeling study of pattern formation during freeze casting. Those studies use unidirectional freezing of simple binary liquid mixtures of water and sugars (sucrose and trehalose) in a temperature gradient, which suffice to produce hierarchical templated structures similar to those observed in more complex multi-component freeze-cast systems including lamellae, undulated ridges, and more exotic “jellyfish-like” substructures. Multiscale 3D phase-field simulations reproduce remarkably well those structures quantitatively and identify key properties of the ice-water interface that control their formation. They further reveal that lamellae form as a result of a novel symmetry-breaking secondary instability of partially faceted cellular structures and pinpoint additional secondary instability mechanisms giving rise to smaller-scale substructures.

Kaihua Ji↗
NASA NTRSDate not supplied

A Cold Wet Mars: A Testable Hypothesis for Ancient Mars Ocean Freezing Point Depression Via Low Molecular Weight Organics

Mars exhibits widespread evidence of surface water in the distant past, but global modeling has had difficulty producing climatological conditions conducive to a wet surface. The hypothesis discussed here examines a different way of approaching the problem rather than focusing on climate, instead an examination of the nature of the surface liquid itself. Previous work has largely assumed that martian surface water was a brine analogous to terrestrial ocean water, but recent discoveries suggest that significant amounts of light organic compounds may have been present via abiogenic native production of light organics on Mars [1]. Light organics such as methanol and formaldehyde have an approximate order-of-magnitude greater freezing point depression than brine, potentially lowering the freezing point of martian surface fluids sufficiently to remain liquid even if the mean surface temperature is below zero Centigrade. As Mars evolved and the surface transitioned to the strongly oxidized conditions seen today, the light organics would have oxidized to carbon dioxide and may be a constituent of the atmosphere today. Considerable work must be done to constrain the freezing points of Mars-relevant organic/water and organic/salt/water mixtures, but this investigation might explain the presence of surface fluid on a cold early Mars – a cold, wet Mars as opposed to a warm, wet Mars. Additionally, this approach may work in conjunction with climatological modeling to better describe early conditions conducive which adequately explain observations. This hypothesis can be tested by examination of ancient fluid inclusions (either in situ or via Mars Sample Return) such as those commonly found in halite, preserving samples of ancient martian surface fluid.

M D Fries↗
DOE OSTI2020

Determination of Chemical Freeze-Out Parameters from Net-Kaon Fluctuations at RHIC

We calculate the mean-over-variance ratio of the net-kaon fluctuations in the Hadron Resonance Gas (HRG) Model for the five highest energies of the RHIC Beam Energy Scan (BES) for different particle data lists. We compare these results with the latest experimental data from the STAR collaboration in order to extract sets of chemical freeze-out parameters for each list. We focused on the PDG2012 and PDG2016+ particle lists, which differ largely in the number of resonant states. Furthermore, our analysis determines the effect of the amount of resonances included in the HRG on the freeze-out conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Bilayer hybrid graphite anodes via freeze tape casting for extreme fast charging applications

Extreme fast charging (XFC) of lithium-ion batteries is critical for continuous market adoption of electric vehicles. However, mass transport limitations and sluggish kinetics lead to lithium plating in graphite anodes under fast charging conditions. One approach to address the mass transport limitation in graphite is to design low-tortuosity electrodes to enhance ionic transport. In this study, a bilayer hybrid structured electrode with directionally aligned channels was developed via freeze tape casting, which enables faster lithium ion diffusion through the graphite electrode. A scalable roll-to-roll process was designed in which slurry can be cast on any substrates for simple processing. Additionally, electrochemical impedance spectroscopy measurements indicated that the bilayer hybrid coating had both low tortuosity and short diffusion pathways, enabling XFC charging. Rate testing for the bilayer hybrid electrode indicated superior performance over the other coatings, exhibiting a ~20% improvement in the charge capacity compared with the conventional coating at 5C and 10 min total charging time. The bilayer hybrid electrode also demonstrated a 10% improvement in capacity retention compared with the conventional electrode after 1000 cycles at XFC conditions. This study demonstrates freeze tape casting as a scalable way to fabricate low-tortuosity electrodes for XFC applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Electrified Operando -Freezing of Electrocatalytic CO 2 Reduction Cells for Cryogenic Electron Microscopy

The ability to freeze and stabilize reaction intermediates in their metastable states and obtain their structural and chemical information with high spatial resolution would be very powerful to unravel the fundamentals in many important materials technologies such as catalysis and batteries. Here, we develop an electrified operando-freezing methodology for the first time to preserve these metastable states under electrochemical reaction conditions for cryogenic electron microscopy (cryo-EM) imaging and spectroscopy. Using Cu catalysts for CO 2 reduction as a model system, we observe restructuring of the Cu catalyst in a CO 2 atmosphere while the same catalyst remains intact in an air atmosphere at the nanometer scale. Furthermore, we discover the existence of single valance Cu (1+) state and C-O bonding at the electrified liquid-solid interface of the operando-frozen samples, which are key reaction intermediates that traditional ex situ measurements fail to detect. Finally, this work highlights our novel technique to study the local structure and chemistry of electrified liquid-solid interfaces, which has broad impact for many electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2023

Actively Controlled Louver for Human Spacecraft Radiator Ultraviolet (UV), Dust, and Freeze Protection

The paper examines the use of actively controlled louvers for human spacecraft radiators. State of the Art (SOA) radiators were design for Low Earth Orbit (LEO) operations where Ultraviolet (UV) radiation and dust have miniscule performance impacts. However, Artemis missions to the lunar orbit or surface will expose the radiators to high dose UV radiation and dust, which can degrade the radiator coating emissivity by up to 50% and consequently reduce performance early in missions. In addition, environmental nighttime temperatures at the lunar south pole are significantly colder and linger longer than LEO, and may require up to 4 kW of heater power to prevent coolant tubes from freezing, thawing, and rupturing. Analysis showed equipping the radiators with actively controlled louvers attenuated the UV radiation and dust effects, and limited degradation to less than 10% through End of Life (EOL) of missions. Furthermore, analysis demonstrated the ability to eliminate the heater power needed for freeze protection. Louver technology is a promising solution to maintain radiator performance and integrity for Artemis missions, but heritage louvers are passively controlled and only been used on small satellites. The technology requires maturing to active control, or motor actuated, to achieve faster thermal response times. Design considerations are discussed in this paper.

Louver↗
DOE OSTI2026

Infrared freeze-in of magnetic dipole dark matter

We propose a novel mechanism for the cosmological production of keV–GeV mass dark matter that interacts with the Standard Model through a small effective magnetic dipole moment. Such an interaction can be radiatively generated if dark matter couples to heavier charged particles. Previous studies have focused on the case where these charged states are much heavier than the reheat temperature, such that freeze-in production of dark matter is sensitive to the ultraviolet details of reheating. Here, we instead consider the possibility that these heavy states have masses comparable to the dark matter mass and are charged under a new kinetically-mixed U (1)$^{′}$. As a result, dark matter production is dominated by the infrared freeze-in of the heavy charged states that subsequently thermalize the rest of the dark sector to a temperature much below that of the visible bath. We delineate regions of parameter space consistent with cosmological and astrophysical constraints and identify benchmark scenarios that can guide the next generation of direct detection experiments searching for spin-dependent scattering of sub-GeV dark matter.

Berlin, Asher [Fermilab] (ORCID:0000000211561482)↗