Search NASASearch

SEARCH · Search NASA

Results for “frequency stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The Ponderomotive Effects of Narrow-band, Superconducting Resonators in Open and Closed Loop

In this work, we present measurements of ponderomotive instabilities in narrow-band, coaxial resonators in open and closed control loop systems. We show an analytical scheme we will use in future studies to examine the dependency of open loop stability on mechanical parameters. Analytical and simulation models are used to predict the onset of the oscillatory instability in half wave resonators with active disturbance rejection control for amplitude and phase stabilization. We demonstrate that for high amplitude controller bandwidths, ponderomotive oscillations can couple with the controller frequency response via higher harmonics and lower the threshold for the oscillatory instability. We reaffirm the superiority of in-phase/quadrature $(I/Q)$ component control in regards to preventing the oscillatory instability, and show how the phase controller can amplify the crosstalk of disturbances in amplitude and phase control. In cases with large disturbances, this effect can lead to instabilities not present in $I/Q$ control.

Brown, Jacob [Michigan State U.; Fermilab] (ORCID:

Isotope effects and Alfvén eigenmode stability in JET H, D, T, DT, and He plasmas

While much about Alfvén eigenmode (AE) stability has been explored in previous and current tokamaks, open questions remain for future burning plasma experiments, especially regarding exact stability threshold conditions and related isotope effects; the latter, of course, requiring good knowledge of the plasma ion composition. In the JET tokamak, eight in-vessel antennas actively excite stable AEs, from which their frequencies, toroidal mode numbers, and net damping rates are assessed. The effective ion mass can also be inferred using measurements of the plasma density and magnetic geometry. Thousands of AE stability measurements have been collected by the Alfvén Eigenmode Active Diagnostic in hundreds of JET plasmas during the recent Hydrogen, Deuterium, Tritium, DT, and Helium-4 campaigns. In this novel AE stability database, spanning all four main ion species, damping is observed to decrease with increasing Hydrogenic mass, but increase for Helium, a trend consistent with radiative damping as the dominant damping mechanism. These data are important for confident predictions of AE stability in both non-nuclear (H/He) and nuclear (D/T) operations in future devices. In particular, if radiative damping plays a significant role in overall stability, some AEs could be more easily destabilized in D/T plasmas than their H/He reference pulses, even before considering fast ion and alpha particle drive. Active MHD spectroscopy is also employed on select HD, HT, and DT plasmas to infer the effective ion mass, thereby closing the loop on isotope analysis and demonstrating a complementary method to typical diagnosis of the isotope ratio.

Alfvén eigenmodes

On the Stability of Power Transmission Systems Under Persistent Inverter Attacks: A Bi-Linear Matrix Approach

We investigate the stability and robustness properties of a power transmission system under persistent deceiving attacks on inverter-interfaced energy resources. The attacks can corrupt the damping coefficients in the inverters' controllers and measurements of the frequency at the points of coupling. Leveraging tools from hybrid dynamical systems theory, we characterize a broad family of persistent (and not necessarily periodic) attacks acting on the inverters, under which the stability properties of the transmission system can be shown to not be compromised. To address potentially conservative conditions identified through conventional bounding techniques, sufficient conditions on the average activation time of the attacks are identified via Lyapunov theory, as well as the formulation and solution of a class of bilinear matrix inequalities (BMI). The results are obtained for constant and slowly time-varying loads via input-to-state stability (ISS) tools. Numerical simulations on the IEEE 39-bus test system are also presented.

24 POWER TRANSMISSION AND DISTRIBUTION

Pointing stabilization of a 1 Hz high-power laser via machine learning

Abstract High-power lasers are vital for particle acceleration, imaging, fusion and materials processing, requiring precise control and high-energy delivery. Laser plasma accelerators (LPAs) demand laser positional stability at focus to ensure consistent electron beams in applications such as X-ray free-electron lasers and high-energy colliders. Achieving this stability is especially challenging for the low-repetition-rate lasers in current LPAs. We present a machine learning method that predicts and corrects laser pointing instabilities in real-time using a high-frequency pilot beam. By preemptively adjusting a correction mirror, this approach overcomes traditional feedback limits. Demonstrated on the BELLA petawatt laser operating at the terawatt level (30 mJ amplification), our method achieved root mean square pointing stabilization of 0.34 and 0.59 $\unicode{x3bc} \mathrm{rad}$ in the x and y directions, reducing jitter by 65% and 47%, respectively. This is the first successful application of predictive control for shot-to-shot stabilization in low-repetition-rate laser systems, paving the way for full-energy petawatt lasers and transformative advances across science, industry and security.

Amodio, Alessio

The shear Alfvén continuum of quasisymmetric stellarators

The shear Alfvén wave (SAW) continuum plays a critical role in the stability of energetic particle-driven Alfvén eigenmodes. We develop a theoretical framework to analyze the SAW continuum in three-dimensional (3-D) quasisymmetric magnetic fields, focusing on its implications for stellarator design. By employing a near-axis model and degenerate perturbation theory, the continuum equation is solved, highlighting unique features in 3-D configurations, such as the interactions between spectral gaps. Numerical examples validate the theory, demonstrating the impact of flux-surface shaping and quasisymmetric field properties on continuum structure. The results provide insights into optimizing stellarator configurations to minimize resonance-driven losses of energetic particles. This work establishes a basis for incorporating Alfvénic stability considerations into the stellarator design process, demonstrated through optimization of a quasihelical configuration to avoid high-frequency spectral gaps.

fusion plasma

High pressure rinse simulations for PIP-II SRF cavities

The implementation of High Pressure Rinse (HPR) not only ensures thorough cleaning of the inner high purity niobium surface of Superconducting Radio Frequency (SRF) cavities but also unlocks their full potential for achieving peak performance. By effectively removing contaminants and impurities, HPR sets the stage for enhanced superconducting properties, improved energy efficiency, and superior operational stability. A simulation tool has been developed, facilitating the accurate prediction of both the quality and effectiveness of the rinsing process before its execution in the cleanroom. This tool, the focus of this paper, stands as a pivotal advancement in optimizing Superconducting Radio Frequency (SRF) cavity preparation. Furthermore, our paper will also present correlations with cavity cold testing results, demonstrating the practical applicability and reliability of the simulation predictions in real-world scenarios.

43 PARTICLE ACCELERATORS

Paradigm for universal quantum information processing with integrated acousto-optic frequency beamsplitters

Frequency-bin encoding offers tremendous potential in quantum photonic information processing, in which a single waveguide can support hundreds of lightpaths in a naturally phase-stable fashion. This stability, however, comes at a cost: arbitrary unitary operations can be realized by cascaded electro-optic phase modulators and pulse shapers, but require nontrivial numerical optimization for design and have thus far been limited to discrete tabletop components. In this article, we propose, formalize, and computationally evaluate a new paradigm for universal frequency-bin quantum information processing using acousto-optic scattering processes between distinct transverse modes. We show that controllable phase matching in intermodal processes enables 2 × 2 frequency beamsplitters and transverse-mode-dependent phase shifters, which together comprise cascadable FRequency-transverse-mODe Operations (FRODOs) that can synthesize any unitary via analytical decomposition procedures. Modeling the performance of both random gates and discrete Fourier transforms, we demonstrate the feasibility of high-fidelity quantum operations with existing integrated photonics technology, highlighting prospects of parallelizable operations achieving 100% bandwidth utilization. Our approach is realizable with CMOS technology, opening the door to scalable on-chip quantum information processing in the frequency domain.

Lukens, Joseph M. [Purdue Univ., West Lafayette, I

Single-Atom Manganese-Based Catalysts for the Oxidative Dehydrogenation of Propane

Combinatorial screening of 150 supported metal oxide (manganese and additives) catalysts was carried out via a high-throughput synthesis platform and parallel reactors for the oxidative dehydrogenation (ODH) of propane to propylene. Specifically, an organomanganese (0.05-2.5 Mn atoms/nm 2 ) complex was grafted on metal oxide supports (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) premodified with either Lewis acid (Al, Ti, Zn, and Zr) or redox-active (Cu, Cr, Ga Ni, V) additives at various surface coverages (25, 50, and 75%). Catalysts were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, and UV-vis spectroscopy. Catalysts 0.05 Mn/V(50%)/Al 2 O 3 and 0.05 Mn/Ni(50%)/ZrO 2 showed the highest combined propane conversion and propylene selectivities (31/41% and 15/85%), with excellent stability at 500 degrees C for 25 h. The presence of Ni in Mn/Ni/ZrO 2 resulted in a 6-fold increase in turnover frequency (TOF) over the Mn/ZrO 2 . HRTEM identified single Mn atoms after 500 degrees C heat treatment. For the Mn/Ni/ZrO 2 system, Mn was incorporated into the support lattice due to the similar ionic radius of Mn 2+ and Zr 4+ , which was also enhanced by the presence of Ni. For the Mn/V/Al 2 O 3 system, highly active MnO was prevalent as observed by Raman. Both V and Mn contributed to an increase in mutual dispersion, but both species remained on the surface. Finally, it is proposed that the highly dispersed atom and interactions between Mn with either Ni or V are responsible for the ODH performance and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Verification of global gyrokinetic simulation of low frequency mode excited by thermal plasma in spherical tokamak

A low frequency Alfven eigenmode in the ST40 spherical tokamak (ST) is found to be resonantly excited by thermal ions from global gyrokinetic GTC simulations. The analyses of phase-space resonances and wave-particle energy exchanges show that the Beta-induced Alfvén-Acoustic Eigenmode (BAAE) is primarily driven unstable by thermal ions, but is stabilized by energetic particles (EPs). When all kinetic effects are artificially suppressed, GTC simulations in the ideal magnetohydrodynamic (MHD) limit confirm the existence of the MHD eigenmode with a frequency in the BAAEs gap, as previously found by the ideal MHD code NOVA. The kinetic effects of thermal ions induce a frequency downshift compared to the stable BAAE in the MHD simulations. These results support the verification for global gyrokinetic simulations of the BAAE in the ST. However, the simulations do not explain the experimental observations of the BAAE in the ST40, possibly owing to the limitation of the collisionless gyrokinetic Monte Carlo model for the EPs.

Alfvén eigenmode

EMT Model Validation of a 2 MVA PV Inverter Using Transient and Frequency-Domain Hardware Testing: Preprint

This paper presents results and new insights gained from a hardware test campaign on a 2 MVA PV inverter for validating its vendor-supplied EMT model. The test campaign was conducted using a 7 MVA grid simulator and a 2 MW PV emulator. It considered both time-domain transient tests and frequency-domain impedance scan tests. The paper highlights the inadequacy of transient tests in capturing all critical resonance modes of the inverter, and the effectiveness of the frequency scan testing in addressing this problem. The paper shows the frequency scan testing as an effective tool for EMT model validation of IBR units which can highlight inaccuracies in the EMT models that are easy to overlook when model validation is performed using only the time-domain transient tests such as voltage ride-through and phase jump tests.

24 POWER TRANSMISSION AND DISTRIBUTION

Development of electron source feedback for enhanced X-ray beam stability at NSLS-II

Future synchrotron light sources are being designed to deliver significantly higher brightness and coherence, enabling faster scanning and more advanced imaging techniques. However, realizing these capabilities requires improved X-ray beam stability, as vibrations directly limit measurement accuracy and image quality. At the NSLS-II Hard X-ray Nanoprobe (HXN), a local mechanical feedback system mitigates low-frequency motion but provides only limited suppression of dominant vibrations at 27 Hz and 120 Hz. To address this limitation, this work explores the use of the electron beam itself as the actuator for feedback by integrating X-ray beam position monitor signals into the fast orbit feedback system through a dedicated electrometer. Experimental results show that this approach effectively suppresses the dominant vibration peaks and enhances stability at the focusing point. Benchmark ptychography measurements further confirm that electron-beam-based feedback reduces background fluctuations and mitigates vibration-induced artifacts under fast-scanning conditions. These results establish the feasibility of using the electron beam as a feedback actuator for next-generation synchrotron applications and provide an experimental assessment of its potential and limitations.

36 MATERIALS SCIENCE

Impact of the Exciter and Governor Parameters on Forced Oscillations

In recent years, the frequency of forced oscillation events due to control system malfunctions or improper parameter settings has increased. Tuning the parameters of exciters and governor models is crucial for maintaining power system stability. Traditional simulation studies typically involve small transient disturbances or step changes to find optimal parameter sets, but existing optimization algorithms often fall short in fine-tuning for forced oscillations. Identifying the sensitive parameters within these control models is essential for ensuring stability during large, sustained disturbances. This study focuses on identifying these critical exciter and governor model parameters by analyzing their influence on sustained forced oscillations. Using Kundur’s two-area system, we analyze common exciter models such as SCRX, ESST1A, and AC7B, along with governor models like GAST, HYGOV, and GGOV1, utilizing PSS®E software version 34. Sustained forced oscillations are injected at generator-1 of area-1, with individual parameter changes dynamically simulated. By considering a local oscillation frequency of 1.4 Hz and an inter-area oscillation mode of 0.25 Hz, we analyze the impact of each parameter change on the magnitude and frequency of forced oscillations as well as on active and reactive power outputs. This novel approach highlights the most influential parameters of each tested model—such as exciter, governor, and turbine gains, as well as time constant parameters—on the impact of forced oscillations. Based on our findings, the sensitive parameters of each tested model are ranked. These would provide valuable insights for industry operators to fine-tune control settings during oscillation events, ultimately enhancing system stability.

42 ENGINEERING

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE

Nanometer-thick ultraflat cantilever resonators

Nanomechanical devices made from ultrathin materials are transforming diverse fields, including sensing, signal processing, and quantum technologies. However, as these materials become thinner, their low bending rigidity poses significant fabrication challenges, and achieving nanometer-thick flat cantilevers with consistent and predictable mechanical responses has remained elusive despite decades of research. Here we present nanometer-thick, ultraflat cantilever resonators fabricated using atomic layer deposition. By effectively mitigating the effects of uncontrollable built-in strain and geometric disorder, the ultraflat nanocantilevers exhibit resonance frequencies closely aligned with thin-plate theory predictions and display low sample-to-sample variability. These cantilevers maintain mechanical stability in both vacuum and air environments, even at large length-to-thickness ratios of up to 3000. The ultraflat nanocantilevers are approaching the thickness limit, beyond which thermal fluctuations at room temperature can spontaneously induce random ripples in otherwise flat films.

nanofabrication

Stability, electronic quantum states, and magnetic interactions of Er 3+ ions in Ga 2 ⁢O 3

Here, we report an ab initio study of phase stability, defect formation, electronic structure, and multiple magnetic, Dzyaloshinskii-Moriya, optical, hyperfine, and crystal field interactions in erbium (Er)-doped wide band gap 𝛼- and 𝛽-gallium oxides (Ga 2 ⁢O 3 ), critically important to make a foundation for both optoelectronic and quantum information applications. The chemical, structural, mechanical, and dynamical stabilities of the pristine phases are confirmed from respective negative formation energies, negative cohesive energies, favorable elastic constants, and positive phonon frequencies. The phonon dispersions indicate that the Ga-O bonds are uniform in the 𝛼-phase, while they vary in the 𝛽-phase due to the anisotropic polyhedral movement. The defect formation energy analysis confirms that both Er-doped 𝛼- and 𝛽−Ga 2 ⁢O 3 prefer Er 3+ (neutral) state. The underestimated band gaps of the pristine phases from standard density functional theory (DFT) calculations as compared to experimental values are corrected by employing the hybrid functional calculations, resulting in the indirect band gaps of 5.21 eV in 𝛼−Ga 2 ⁢O 3 and 4.94 eV in 𝛽−Ga 2 ⁢O 3 . The site preference energy analysis indicates partial occupation of Er in the octahedral site of Ga. The anisotropic nature of hyperfine tensor coefficients of Er is similar in both phases, which may be due to the occupation of Er in the same octahedral Ga site. On the other hand, the calculated magnetic exchange interaction between two Er dopants is negative for 𝛼 and positive for 𝛽, indicating an antiferromagnetic (AFM) ground state in the former and a ferromagnetic (FM) ground state in the latter. Large values of Dzyaloshinskii-Moriya interactions (DMIs) are obtained along the 𝑥 direction in the 𝛼 and along the 𝑦 direction in the 𝛽. The large DMI may support exotic magnetic textures, a promising direction for spintronic applications. The analysis of dielectric constants and refractive indices of both pristine and Er-doped phases shows a good agreement with available experimental values. The calculated optical anisotropy is slightly higher in 𝛽 than those in 𝛼, which is due to the involvement of lower symmetry in 𝛽. The crystal field coefficients (CFCs) calculated from DFT are used to analyze 4⁢𝑓 multiplets and 4⁢𝑓 −4⁢𝑓 transitions. Thus calculated lowest energy level of the first excited state to the lowest energy level of the ground state is about 1.53 µ⁢m, which is in a good agreement with available experiments, and it falls within the quantum telecommunication wavelength range.

3-dimensional systems

Stability analysis of Alfvén eigenmodes excited by ion cyclotron resonance heating on EAST

Alfvén wave instabilities driven by energetic particles are common in fusion devices. Understanding their behavior is essential for the good confinement of fusion plasma. For this purpose, a series of experiments are performed on EAST to investigate the excitation of toroidal Alfvén eigenmodes (TAEs). Experimentally, it was found that AEs with frequencies around 80, 134, 157 kHz are excited by ion cyclotron resonance heating (ICRH) hydrogen minority heating scenario. Moreover, the excitation of AEs is independent of the wall-coating materials, but determined with the generation and confinement of the fast ions. Statistical analysis suggests that the TAEs can only be excited when the ICRH power is larger than 2 MW and the H 98 factor is larger than 1.15. In line with the experiments, a set of simulations using TORIC, ASCOT, and NOVA-C is performed. The simulation results show that with the experimental density profile and safety factor, the measured TAE with frequency of 134 kHz is well reproduced by taking into account the plasma toroidal rotation frequency. However, the appearance of the 80 kHz mode cannot be captured in the simulations. The ICRH-generated fast hydrogen ions mainly have banana orbits and that their perpendicular velocity is much larger than that of the parallel ions. The stability analysis with NOVA-C suggests that the radial gradient of the fast H ion distribution is the only driving source of TAEs. For TAEs locate in the center of Alfvén continuum, the D ion Landau damping is the dominant damping term; For most other TAEs which have intersections with the continuum boundary, the continuum damping becomes the dominant damping mechanism.

Alfvén eigenmodes

Co-Simulation of PSS/E, OpenDSS, and PSCAD for Power Systems Stability Analysis With Inverter-Based Resources: Preprint

The increasing penetration of inverter-based resources (IBRs) is reshaping the dynamic behavior of power systems. IEEE standard 1547-2018 suggests that distributed energy resources (DERs) should provide grid services such as voltage and frequency supports. On the other hand, dynamic events caused by IBRs such as sub-synchronous oscillation have been reported. These developments necessitate improvement in the current modeling capabilities to better understand the interdependencies within power systems. These include interactions between transmission and distribution systems, among IBRs themselves, and between IBRs and conventional resources. In this paper, we present a co-simulation model integrating PSS/E, OpenDSS, and PSCAD to analyze IBR impacts on the stability of transmission and distribution systems. A key challenge in developing a co-simulation model is ensuring interoperability among different simulators (interfacing and data flow) while maintaining accurate results. Using the developed model, we simulate the impact of IBRs on power systems in two test cases: 1) fault ride through (FRT) capability during a generation trip contingency; 2) IBR-induced sub-synchronous oscillation. The results show the effectiveness of the co-simulation model.

24 POWER TRANSMISSION AND DISTRIBUTION

Long-term calibration and validation of stability of the Auger Engineering Radio Array using the diffuse Galactic radio emission

The Auger Engineering Radio Array (AERA) measures radio emission from high-energy extensive air showers. Consisting of 153 autonomous radio-detector stations spread over 17 km^2, it detects radio waves in the frequency range of 30 to 80 MHz. Accurate characterization of the detector response is crucial for proper interpretation of the collected data. Previously, this was achieved through laboratory measurements of the analog chain and simulations and measurements of the antenna's directional response. In this paper, we perform an absolute calibration using the continuously monitored sidereal modulation of the diffuse Galactic radio emission. Calibration is done by comparing the average frequency spectra recorded by the stations with predictions from seven different models of the full radio sky, accounting for the system response, which includes the antenna, filters, and amplifiers. The analysis of the calibration constants over a period of seven years shows no relevant and no significant ageing effect in the AERA antennas. This result confirms the long-term stability of the detector stations and demonstrates the possibility for a radio detector to effectively monitor ageing effects of other detectors operating over extended periods.

Antennas