Search NASA⌕ Search

SEARCH · Search NASA

Results for “front propagation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The delayed-detonation model of a type Ia supernovae. 1: The deflagration phase

The nature of the 'delayed detonation' mechanism of Khokhlov for the explosion of Type Ia supernovae is investigated by using two-dimensional numerical hydrodynamics simulations. A new algorithm is used to treat the deflagration front. Assuming that it propagates locally at the laminar flame speed, the deflagration is insufficient to unbind the star. Expansion shuts of the flame; much of this small production of iron group nuclei occurs at lower densities, which reduces the electron-capture problem. The burning front does become wrinkled, but the wavelength of the instability is much larger than the computational grid size and is resolved; this is consistent with previous analysis. Because the degenerate star has an adiabatic exponent only slightly above 4/3, the energy released by deflagration drives a pulsation of large amplitude. During the first expansion phase, adiabatic cooling shuts off the burning, and a Rayleigh-Taylor instability then gives mixing of high-entropy ashes with low-entropy fuel. During the first contraction phase, compressional heating reignites the material. This paper deals with the deflagration phase, from the onset of burning, through expansion and quenching of the flame, to the first contraction.

Arnett, David↗
NASA NTRS2013

Modeling Delamination in Postbuckled Composite Structures Under Static and Fatigue Loads

The ability of the Abaqus progressive Virtual Crack Closure Technique (VCCT) to model delamination in composite structures was investigated for static, postbuckling, and fatigue loads. Preliminary evaluations were performed using simple Double Cantilever Beam (DCB) and Mixed-Mode Bending (MMB) specimens. The nodal release sequences that describe the propagation of the delamination front were investigated. The effect of using a sudden or a gradual nodal release was evaluated by considering meshes aligned with the crack front as well as misaligned meshes. Fatigue simulations were then performed using the Direct Cyclic Fatigue (DCF) algorithm. It was found that in specimens such as the DCB, which are characterized by a nearly linear response and a pure fracture mode, the algorithm correctly predicts the Paris Law rate of propagation. However, the Abaqus DCF algorithm does not consider different fatigue propagation laws in different fracture modes. Finally, skin/stiffener debonding was studied in an aircraft fuselage subcomponent in which debonding occurs deep into post-buckling deformation. VCCT was shown to be a robust tool for estimating the onset propagation. However, difficulties were found with the ability of the current implementation of the Abaqus progressive VCCT to predict delamination propagation within structures subjected to postbuckling deformations or fatigue loads.

Bisagni, Chiara↗
NASA NTRS1979

Modal propagation angles in a cylindrical duct with flow and their relation to sound radiation

The angles of propagation for the wave front making up a duct mode are presented with the Mach number in the duct. Approximate equations are derived to provide simple utilitarian expressions. These expressions are valid only near the outer wall which is the most important region since the bulk of the acoustic intensity is located there. Exact solutions using Hankel functions are given in an appendix. These data corroborate the approximate solution accuracy near the outer wall. The axial propagation angle is used to infer information about the far-field radiation pattern. The resultant axial angle of propagation in the duct is shown to agree exactly with the peak of the principal lobe to far-field radiation obtained from formal radiation calculations when the Mach number is uniform everywhere. The obtained solution is extended to cover the case of different Mach numbers inside and outside the duct for which exact calculations have not been available for engine inlet configurations.

Rice, E. J.↗
NASA NTRS1979

Negative streamer development in FEP teflon

A computational model is developed which describes the evolution and propagation of an ionizing front (negative streamer) in solid materials. The ionization front consists of drifting avalanching electrons moving self-consistently under the influence of their own space-charge field together with an applied external field. The required input information for the model consists of the functional dependence of the macroscopic transport coefficients on the local electric field, the initial conditions for beginning the calculation, and the strength of the applied field. A computational approach for specifying the transport coefficients and initional conditions is also described. The approach has been implemented by constructing three computer codes which sequentially interface, beginning with single electron scattering, and ending with streamer development. Computational results are presented for model calculations in Teflon. The overall model is perceived to provide a picture of the initiation phase of a propagating discharge in electron-irradiated dielectrics.

Beers, B. L.↗
NASA NTRS1983

Possible observation of a disconnected magnetic structure in a coronal transient

Solar Maximum Mission coronagraph/polarimeter observations of the coronal transient of March 15-16, 1980, which show a bright front convex toward the sun propagating out through the corona at 175 km/sec, are reported. A fan-shaped bright region connecting this front to the inner corona collapses into a narrow, bright ray over the next few hours. These observations are interpreted as resulting from the disconnection of magnetic loops from the underlying prominencelike loop structures seen rising earlier in the event. Other similar inverted arches exist in the C/P data, but are usually seen with poorer temporal resolution.

Illing, R. M. E.↗
NASA NTRS1972

Strongly coupled stress waves in heterogeneous plates.

Consideration of coupled stress waves generated by an impulsive load applied at one end of a semiinfinite plate. For the field equations governing the one-dimensional coupled waves a hyperbolic system of equations is obtained in which a strong coupling in the second derivatives exists. The method of characteristics described by Chou and Mortimer (1967) is extended to cover the case of strong coupling, and a study is made of the transient stress waves in a semiinfinite plate subjected to an initial step input. Coupled discontinuity fronts are found to propagate at different velocities. The normal plate stress and the bending moment at different time regimes are illustrated by graphs.

Wang, A. S. D.↗
NASA NTRS1975

Implicit approximate-factorization schemes for the low-frequency transonic equation

Two- and three-level implicit finite-difference algorithms for the low-frequency transonic small disturbance-equation are constructed using approximate factorization techniques. The schemes are unconditionally stable for the model linear problem. For nonlinear mixed flows, the schemes maintain stability by the use of conservatively switched difference operators for which stability is maintained only if shock propagation is restricted to be less than one spatial grid point per time step. The shock-capturing properties of the schemes were studied for various shock motions that might be encountered in problems of engineering interest. Computed results for a model airfoil problem that produces a flow field similar to that about a helicopter rotor in forward flight show the development of a shock wave and its subsequent propagation upstream off the front of the airfoil.

Ballhaus, W. F.↗
NASA NTRS1983

Mass loss from evolved stars. II - Radio continuum emission and evolution to planetary nebulae

The radio continuum properties of cool evolved stars are investigated from the viewpoint of mass loss mechanisms and evolution through the planetary nebula stage. The VLA was used to search 32 high mass loss rate objects for 6-cm continuum emission, leading to the detection of NGC 7027, CRL 618, R Aqr, IRC + 10216, and Omicron Ceti. The evolution of such objects to the planetary nebula stage was studied by calculating the propagation of an ionization front into the remnant neutral envelope that is produced by continuous mass loss in the red giant stage. It is found that none of the stars has a hot, compact companion, except for the known cases of R Aqr and Mira, and that envelope fractional ionization is in most cases as small as less than about 0.001.

Spergel, D. N.↗
NASA NTRS1984

Numerical simulations of the Ross Sea tides

Tidal currents below the floating Ross Ice shelf are reconstructed by using a numerical tidal model. They are predominantly diurnal, achieve maximum strength in regions near where the ice shelf runs aground, and are significantly enhanced by topographic Rossby wave propagation along the ice front. A comparison with observations of the vertical motion of the ice shelf surface indicates that the model reproduces the diurnal tidal characteristics within 20 percent. Similar agreement for the relatively weak semidiurnal tides was not obtained, and this calls attention to possible errors of the open boundary forcing obtained from global-ocean tidal simulations and to possible errors in mapping zones of ice shelf grounding. Air-sea contact below the ice shelf is eliminated by the thick ice cover. The dominant sub-ice-shelf circulation may thus be tidally induced. A preliminary assessment of sub-ice-shelf conditions based on the numerical tidal simulations suggests that (1) strong barotropic circulation is driven along the ice front and (2) tidal fronts may form in the sub-ice-shelf cavity where the water column is thin and where the buoyancy input is weak.

Macayeal, D. R.↗
NASA NTRS1992

Color image processing and object tracking workstation

A system is described for automatic and semiautomatic tracking of objects on film or video tape which was developed to meet the needs of the microgravity combustion and fluid science experiments at NASA Lewis. The system consists of individual hardware parts working under computer control to achieve a high degree of automation. The most important hardware parts include 16 mm film projector, a lens system, a video camera, an S-VHS tapedeck, a frame grabber, and some storage and output devices. Both the projector and tapedeck have a computer interface enabling remote control. Tracking software was developed to control the overall operation. In the automatic mode, the main tracking program controls the projector or the tapedeck frame incrementation, grabs a frame, processes it, locates the edge of the objects being tracked, and stores the coordinates in a file. This process is performed repeatedly until the last frame is reached. Three representative applications are described. These applications represent typical uses and include tracking the propagation of a flame front, tracking the movement of a liquid-gas interface with extremely poor visibility, and characterizing a diffusion flame according to color and shape.

Klimek, Robert B.↗
NASA NTRS1992

Combustion instability analysis for liquid propellant rocket engines

The multi-dimensional numerical model has been developed to analyze the nonlinear combustion instabilities in liquid-fueled engines. The present pressure-based approach can handle the implicit pressure-velocity coupling in a non-iterative way. The additional scalar conservation equations for the chemical species, the energy, and the turbulent transport quantities can be handled by the same predictor-corrector sequences. This method is time-accurate and it can be applicable to the all-speed, transient, multi-phase, and reacting flows. Special emphasis is given to the acoustic/vaporization interaction which may act as the crucial rate-controlling mechanism in the liquid-fueled rocket engines. The subcritical vaporization is modeled to account for the effects of variable thermophysical properties, non-unitary Lewis number in the gas-film, the Stefan flow effect, and the effect of transient liquid heating. The test cases include the one-dimenisonal fast transient non-reacting and reacting flows, and the multi-dimensional combustion instabilities encountered in the liquid-fueled rocket thrust chamber. The present numerical model successfully demonstrated the capability to simulate the fast transient spray-combusting flows in terms of the limiting-cycle amplitude phenomena, correspondence between combustion and acoustics, and the steep-fronted wave and flame propagation. The investigated parameters include the spray initial conditions, air-fuel mixture ratios, and the engine geometry. Stable and unstable operating conditions are found for the liquid-fueled combustors. Under certain conditions, the limiting cycle behavior of the combusting flowfields is obtained. The numerical results indicate that the spray vaporization processes play an important role in releasing thermal energy and driving the combustion instability.

Kim, Y. M.↗
NASA NTRS1994

On the sources of interplanetary shocks at 0.72 AU

In order to understand the solar cycle variation of interplanetary shocks and their driving source at 0.72 AU, a survey of Pioneer Venus Orbiter (PVO) magnetometer and plasma data from 1979-1988 has been conducted. Known shock drivers at 1.0 AU include coronal mass ejections (CMEs) and fast/slow stream interactions. In our analysis, CMEs were identified by a decrease in plasma temperature to background or below accompanied by an increase in plasma density and dynamic pressure. It was also required that the magnetic field exhibit a coherent rotation over about a day and an increase and decline in magnitude on a timescale of hours to days. Stream interactions were identified by a characteristic increase in ion temperature and velocity coincident with a decrease in density and a coincident increase in the total magnetic field magnitude. These signatures were usually preceded within 24 hours by a change in flow angle. In all, 45 shocks were identified: 36 driven by CMEs, 6 resulting from fast/slow stream interactions, and 3 with sources that could not be defined. The shocks driven by CMEs show a solar cycle variation that roughly follows the sunspot number. These shocks all have normals consistent with radial propagation of the shock fronts from the sun. In contrast, the few stream interaction related shocks show a tendency to occur later in the solar cycle and have a broader distribution of shock normals.

Lindsay, G. M.↗
NASA NTRS1996

Color Image Processing and Object Tracking System

This report describes a personal computer based system for automatic and semiautomatic tracking of objects on film or video tape, developed to meet the needs of the Microgravity Combustion and Fluids Science Research Programs at the NASA Lewis Research Center. The system consists of individual hardware components working under computer control to achieve a high degree of automation. The most important hardware components include 16-mm and 35-mm film transports, a high resolution digital camera mounted on a x-y-z micro-positioning stage, an S-VHS tapedeck, an Hi8 tapedeck, video laserdisk, and a framegrabber. All of the image input devices are remotely controlled by a computer. Software was developed to integrate the overall operation of the system including device frame incrementation, grabbing of image frames, image processing of the object's neighborhood, locating the position of the object being tracked, and storing the coordinates in a file. This process is performed repeatedly until the last frame is reached. Several different tracking methods are supported. To illustrate the process, two representative applications of the system are described. These applications represent typical uses of the system and include tracking the propagation of a flame front and tracking the movement of a liquid-gas interface with extremely poor visibility.

Klimek, Robert B.↗
NASA NTRS2003

Pulsed Ejector Wave Propogation Test Program

The development of, and initial test data from, a nondetonating Pulse Detonation Engine (PDE) simulator tested in the NASA Glenn 1 x 1 foot Supersonic Wind Tunnel (SWT) is presented in this paper. The concept is a pulsed ejector driven by the simulated exhaust of a PDE. This pro- gram is applicable to a PDE entombed in a ramjet flowpath, i.e., a PDE combined-cycle propulsion system. The ejector primary flow is a pulsed, uiiderexpanded, supersonic nozzle simulating the supersonic waves ema- nating from a PDE, while the ejector secondary flow is the 1 x 1 foot SWT test section operated at subsonic Mach numbers. The objective is not to study the detonation details, but the wave physics including t,he start- ing vortices, the extent of propagation of the wave front, the reflection of the wave from the secondary flowpath walls, and the timing of these events of a pulsed ejector, and correlate these with Computational Fluid Dynamics (CFD) code predictions. Pulsed ejectors have been shown to result in a 3 to 1 improvement in LID (length-to-diameter) and a near 2 to 1 improvement in thrust augmentation over a steady ejector. This program will also explore the extent of upstream interactions between an inlet and large, periodically applied, backpressures to the inlet as would be present due to combustion tube detonations in a PDE. These interactions could result in inlet unstart or buzz for a supersonic mixed compression inlet. The design of the present experiment entailed the use of an 2-t diagram characteristics code to study the nozzle filling and purging timescales as well as a series of CFD analyses conducted using the WIND code. The WIND code is a general purpose CFD code for solution of the Reynolds averaged Navier-Stokes equations and can be applied to both steady state and time-accurate calculations. The first, proof-of-concept, test entry (spring 2001) pressure distributions shown here indicate the simulation concept was successful and therefore the experimental approach is sound.

Fernandez, Rene↗
NASA NTRS2017

Combustion Joining of Regolith Tiles for In-Situ Fabrication of Launch/Landing Pads on the Moon and Mars

To mitigate dust problems during launch-landing operations in lunar and Mars missions, it is desired to build solid pads on the surface. Recently, strong tiles have been fabricated from lunar regolith simulants using high-temperature sintering. The present work investigates combustion joining of these tiles through the use of exothermic intermetallic reactions. Specifically, nickel aluminum (1:1 mole ratio) mixture was placed in a gap between the tiles sintered from JSC-1A lunar regolith simulant. Upon ignition by a laser, a self-sustained propagation of the combustion front over the mixture occurred. Joining was improved with increasing the tile thickness from 6.3 mm to 12.7 mm. The temperatures sufficient for melting the glass phase of JSC-1A were recorded for 12.7-mm tiles, which explains the observed better joining.

Ferguson, Robert E.↗
NASA NTRS2017

Combustion Joining of Regolith Tiles for In-Situ Fabrication of Launch/Landing Pads on the Moon and Mars

To mitigate dust problems during launch/landing operations in lunar and Mars missions, it is desired to build solid pads on the surface. Recently, strong tiles have been fabricated from lunar regolith simulants using high-temperature sintering. The present work investigates combustion joining of these tiles through the use of exothermic intermetallic reactions. Specifically, nickel/aluminum (1:1 mole ratio) mixture was placed in a gap between the tiles sintered from JSC-1A lunar regolith simulant. Upon ignition by a laser, a self-sustained propagation of the combustion front over the mixture occurred. Joining was improved with increasing the tile thickness from 6.3 mm to 12.7 mm. The temperatures sufficient for melting the glass phase of JSC-1A were recorded for 12.7-mm tiles, which explains the observed better joining.

Ferguson, Robert E.↗
NASA NTRS2023

Interpretation of Flat Energy Spectra Upstream of Fast Interplanetary Shocks

Interplanetary shocks are large-scale heliospheric structures often caused by eruptive phenomena at the Sun, and represent one of the main sources of energetic particles. Several interplanetary shock crossings by spacecraft at 1 AU have revealed enhanced energetic-ion fluxes that extend far upstream of the shock. Surprisingly, in some shock events, ion fluxes with energies between 100 keV and about 2 MeV acquire similar values (which we refer to as "overlapped'' fluxes), corresponding to flat energy spectra in that range. In contrast, closer to the shock, the fluxes are observed to depend on energy. In this work, we analyze three interplanetary shock-related energetic particle events observed by the Advanced Composition Explorer spacecraft where flat ion energy spectra were observed upstream of the shock. We interpret these observations via a velocity filter mechanism for particles in a given energy range. This reveals that low energy particles tend to be confined to the shock front and cannot easily propagate upstream, while high energy particles can. The velocity filter mechanism has been corroborated from observations of particle flux anisotropy by the Solid-State Telescope of Wind/3DP.

Shock waves↗
NASA NTRS1992

Numerical simulation and analysis of a prefrontal squall line. I - Observations and basic simulation results. II - Propagation of the squall line as an internal gravity wave

Results of an observational and numerical study of the squall line that occurred on June 17-18, 1978, are presented. This squall line was initially triggered by the strong surface convergence along a cold front and stretched from Illinois to the Texas Panhandle. The squall line was aligned with the surface front during its initial development, but then propagated faster than the front, resulting in a separation of approximately 200 km by 0300 UTC and 300-400 km by 0600 UTC. The Colorado State University Regional Atmospheric Modeling System is used to model the squall-line development and propagation. Results are described from several experiments that tested the sensitivity to the use of the Kuo-type cumulus parameterization scheme and grid-scale microphysical processes. The movement of the squall line in the model is shown to be due to the propagation of a deep tropospheric internal gravity wave in a CISK-like process. The thermal and dynamic perturbations associated with the hypothesized wave are shown to be consistent with internal gravity wave theory.

Cram, Jennifer M.↗