Search NASA⌕ Search

SEARCH · Search NASA

Results for “gas solution equilibrium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Propagation of solar disturbances in interplanetary space

Time-dependent solutions of a one-fluid model of the interplanetary medium are investigated. This set of unsteady hydrodynamic equations has been written in conservation form in order to apply the Lax-Wendroff method for the solution of this problem. The initial condition is specified by a pulse at 1 solar radius. The equilibrium condition is chosen to be the steady solution of a quiet solar wind. The specified solar disturbances in this calculation are allowed to be both sub- and supersonic by the present theoretical formulation. The results are presented in terms of density, velocity, and temperature profiles of the interplanetary gas flow at heliocentric distances up to about 10 AU at any particular time. The trajectories of disturbances for various initial pulses are shown. Some 1972 solar-flare observational data are compared with these theoretical calculations. From these calculations, the effects on the interplanetary environment, due to the propagation of solar disturbances, can be determined.

Wu, S. T.↗
NASA NTRSDate not supplied

Assessment of Pioneer Venus Entry Heating with Coupled Radiation and Ablation

The objective of this work is to reconstruct thermocouple temperature measurements taken at the stagnation point of the Pioneer Venus large probe using uncoupled and coupled ablation calculations. The time history of the large probe forebody entry heating was obtained from a trajectory-based analysis that employed a material response solver to model equilibrium and nonequilibrium ablation chemistry at the surface. In the uncoupled approach, equilibrium ablation chemistry was assumed in the material response calculations, but the material response outputs were not returned to the flowfield solver. Therefore, the effects of char and pyrolysis gas injection into the boundary layer due to ablation (e.g., convective blockage and radiative energy absorption) did not influence the flowfield solutions. In the coupled approach, nonequilibrium ablation chemistry was performed and the material response outputs were returned to the flowfield solver. Therefore, the effects of char and pyrolysis gas injection into the boundary layer were accounted for in the flowfield solutions. Both uncoupled and coupled approaches produced reconstructed temperatures that were within 10% of the flight measurements through the entry heat pulse, with the coupled results comparing more favorably with the measurements. Overall, the reconstructed thermocouple temperatures in this work significantly improved on the results of previous reconstructions for the large probe.

Jannuel V V Cabrera↗
NASA NTRS1976

Non-equilibrium radiation from viscous chemically reacting two-phase exhaust plumes

A knowledge of the structure of the rocket exhaust plumes is necessary to solve problems involving plume signatures, base heating, plume/surface interactions, etc. An algorithm is presented which treats the viscous flow of multiphase chemically reacting fluids in a two-dimensional or axisymmetric supersonic flow field. The gas-particle flow solution is fully coupled with the chemical kinetics calculated using an implicit scheme to calculate chemical production rates. Viscous effects include chemical species diffusion with the viscosity coefficient calculated using a two-equation turbulent kinetic energy model.

Penny, M. M.↗
NASA NTRS1992

Ignition and combustion characteristics of metallized propellants

During this reporting period, theoretical work on the secondary atomization process was continued and the experimental apparatus was improved. A one-dimensional model of a rocket combustor, incorporating multiple droplet size classes, slurry combustion, secondary atomization, radiation heat transfer, and two-phase slip between slurry droplets and the gas flow was derived and a computer code was written to implement this model. The STANJAN chemical equilibrium solver was coupled with this code to yield gas temperature, density, and composition as functions of axial location. Preliminary results indicate that the model is performing correctly, given current model assumptions. Radiation heat transfer in the combustion chamber is treated as an optically-thick participating media problem requiring a solution of the radiative transfer equation. A cylindrical P sub 1 approximation was employed to yield an analytical expression for chamber-wall heat flux at each axial location. The code exercised to determine the effects of secondary atomization intensity, defined as the number of secondary drops produced per initial drop, on chamber burnout distance and final Al2O3 agglomerate diameter. These results indicate that only weak secondary atomization is required to significantly reduce these two parameters. Stronger atomization intensities were found to yield decreasing marginal benefits. The experimental apparatus was improved to reduce building vibration effects on the optical system alignment. This was accomplished by mounting the burner and the transmitting/receiving optics on a single frame supported by vibration-isolation legs. Calibration and shakedown tests indicate that vibration problems were eliminated and that the system is performing correctly.

Mueller, D. C.↗
NASA NTRS2003

Uptake of Small Organic Compounds by Sulfuric Acid Aerosols: Dissolution and Reaction

To assess the role of oxygenated volatile organic compounds in the upper troposphere and lower stratosphere, the interactions of a series of small organic compounds with low-temperature aqueous sulfuric acid will be evaluated. The total amount of organic material which may be taken up from the gas phase by dissolution, surface layer formation, and reaction during the particle lifetime will be quantified. Our current results for acetaldehyde uptake on 40 - 80 wt% sulfuric acid solutions will be compared to those of methanol, formaldehyde, and acetone to investigate the relationships between chemical functionality and heterogeneous activity. Where possible, equilibrium uptake will be ascribed to component pathways (hydration, protonation, etc.) to facilitate evaluation of other species not yet studied in low temperature aqueous sulfuric acid.

Iraci, L. T.↗
NASA NTRS1972

Inviscid surface streamlines and heat transfer on shuttle-type configurations.

A method is developed which calculates laminar, transitional, and turbulent heating rates on arbitrary blunt-nosed three-dimensional bodies at angle of attack in hypersonic flow. The geometry of the body may be specified analytically, or generated from a doubly cubic spline fit to coordinate points. Inviscid surface streamlines are calculated from Euler's equation using a prescribed pressure distribution. Laminar and turbulent heating rates are determined along a streamline by applying the axisymmetric analog to solutions of the axisymmetric boundary-layer equations. The location of the transition region may be specified optionally by geometric location, momentum thickness Reynolds number, or integrated unit Reynolds number along a streamline. Transitional heating rates are then calculated as a weighted average of the local laminar and turbulent values. Either ideal gas or equilibrium air properties may be used.

Dejarnette, F. R.↗
NASA NTRS1974

Computer program for calculation of real gas turbulent boundary layers with variable edge entropy

A user's manual for a computer program which calculates real gas turbulent boundary layers with variable edge entropy on a blunt cone or flat plate at zero angle of attack is presented. An integral method is used. The method includes the effect of real gas in thermodynamic equilibrium and variable edge entropy. A modified Crocco enthalpy velocity relationship is used for the enthalpy profiles and an empirical correlation of the N-power law profile is used for the velocity profile. The skin-friction-coefficient expressions of Spalding and Chi and Van Driest are used in the solution of the momentum equation and in the heat-transfer predictions that use several modified forms of Reynolds analogy.

Boney, L. R.↗
NASA NTRS1978

Monte Carlo solution of Boltzmann equation for a simple model of highly nonequilibrium diatomic gases - Translational rotational energy relaxation

Theoretical results pertaining to internally excited translational-rotational energy relaxation in a spatially uniform diatomic gas far removed from solid boundaries are obtained by solving the Boltzmann equation by means of the Monte Carlo direct simulation method. The analysis is based on calculations involving three different types of initial conditions: equilibrium, nonequilibrium-equipartition (i.e., equipartition is satisfied, but the distributions are perturbed), and nonequilibrium-nonequipartition (i.e., both equipartition and the distributions are perturbed). Results of monatomic-gas simulations are also included to facilitate comparisons with the coupled translational-rotational relaxation simulations, and some simulations for a normal shock-wave structure are briefly examined. The results show that: (1) single-step transitions are the significant mechanisms of intermodal energy transfer; (2) translational-rotational transitions are coupled most efficiently for low-lying states of rotationally excited molecules and least efficiently for highly rotationally excited molecules; and (3) relaxation occurs via a successive set of distributions that are not Maxwell-Boltzmann (nonlocal Maxwellian).

Yoshikawa, K. K.↗
NASA NTRS1963

Application of Dorodnitsyn's Integral Method to Nonequilibrium Flows over Pointed Bodies

Dorodnitsyn's integral method is used to obtain an approximate solution to the supersonic nonequilibrium flow over pointed bodies with attached shock waves. The partial differential equations governing the flow are converted to an approximate set of ordinary equations, which are solved by numerical integration starting at the body tip. Detailed analytical and numerical results for the first approximation are presented, considering the vibrational relaxation of a diatomic gas over a wedge or cone. It is shown that the first approximation yields: (1) The exact flow-variable gradients at the wedge tip (2) Expressions for the flow-variable gradients at the cone tip which are in agreement with extrapolations of characteristics calculations (3) A good approximate algebraic solution for frozen or equilibrium conical flow (4) An approximate expression for the nonequilibrium-flow stream function which affords a means of obtaining variations across the shock layer of the temperature and vibrational energy. Numerical results for both the wedge and cone compare favorably with identical cases computed by the method of characteristics.

NONEQUILIBRIUM FLOW↗
NASA NTRS1990

Absorption Of Gases By Glassy Polymers

Report discusses solubility of gas in glassy polymer, both above and below glass-transition temperature (Tg). Thermodynamic arguments brought to bear on previously-developed mathematical models, result being new model that enables calculation of infinite-dilution partial molar volume of solvent in glass or liquid solvent from data on pressure, volume, and temperature of solute in equilibrium with solvent.

Fedors, Robert F.↗
NASA NTRS2001

Solubility of methanol in low-temperature aqueous sulfuric acid and implications for atmospheric particle composition

Using traditional Knudsen cell techniques, we find well-behaved Henry's law uptake of methanol in aqueous 45 - 70 wt% H2SO4 solutions at temperatures between 197 and 231 K. Solubility of methanol increases with decreasing temperature and increasing acidity, with an effective Henry's law coefficient ranging from 10(exp 5) - 10(exp 8) M/atm. Equilibrium uptake of methanol into sulfuric acid aerosol particles in the upper troposphere and lower stratosphere will not appreciably alter gas-phase concentrations of methanol. The observed room temperature reaction between methanol and sulfuric acid is too slow to provide a sink for gaseous methanol at the temperatures of the upper troposphere and lower stratosphere. It is also too slow to produce sufficient quantities of soluble reaction products to explain the large amount of unidentified organic material seen in particles of the upper troposphere.

Iraci, Laura T.↗
NASA NTRSDate not supplied

Aqueous Alteration on the Ryugu Parent Body Constrained by Chemical Equilibrium Models

The composition of solid samples returned from the asteroid 162173 Ryugu byHayabusa2 indicates aqueous alteration of rocks that formed a parent body of Ryugu [1, 2]. As on parent bodies of carbonaceous chondrites [3-5], Ryugu materials could have went through (1) accretion of anhydrous and reduced rocky grains together with water-rich ices, (2) melting of ices in the body’s interior through release of radiogenic heat [6], and (3)aqueous alteration of rocky and organic materials that produced secondary minerals, salt- and organic-bearing water solutions, gases, and altered organic matter. Although the bulk chemical composition and major mineralogy (phyllosilicates, magnetite, pyrrhotite, carbonates, phosphates, etc.) of Ryugu [1,2]are similar to those of CI carbonaceous chondrites [3-5, 7], the lack of sulfates and a deficiency of oxygen in the returned samples suggest a distinct alteration pathway. Chondritic materials [3-5] do not indicate complete chemical equilibration though low-temperature parent body processes. However, calculations of chemical equilibria in modeling rock-water-gas type systems[e.g., 8, 9], could assess deviations of chondritic materials from equilibrium conditions and constrain partitioning of chemical elements between solid, aqueous, and gas phase for different stages of alteration. Here we constrained speciation of solid, aqueous, and gaseous phases during aqueous alteration on the Ryugu parent body through chemical equilibrium calculations.

M Yu Zolotov↗
NASA NTRS2005

Incorporation of a Chemical Equilibrium Equation of State into LOCI-Chem

Renewed interest in development of advanced high-speed transport, reentry vehicles and propulsion systems has led to a resurgence of research into high speed aerodynamics. As this flow regime is typically dominated by hot reacting gaseous flow, efficient models for the characteristic chemical activity are necessary for accurate and cost effective analysis and design of aerodynamic vehicles that transit this regime. The LOCI-Chem code recently developed by Ed Luke at Mississippi State University for NASA/MSFC and used by NASA/MSFC and SSC represents an important step in providing an accurate, efficient computational tool for the simulation of reacting flows through the use of finite-rate kinetics [3]. Finite rate chemistry however, requires the solution of an additional N-1 species mass conservation equations with source terms involving reaction kinetics that are not fully understood. In the equilibrium limit, where the reaction rates approach infinity, these equations become very stiff. Through the use of the assumption of local chemical equilibrium the set of governing equations is reduced back to the usual gas dynamic equations, and thus requires less computation, while still allowing for the inclusion of reacting flow phenomenology. The incorporation of a chemical equilibrium equation of state module into the LOCI-Chem code was the primary objective of the current research. The major goals of the project were: (1) the development of a chemical equilibrium composition solver, and (2) the incorporation of chemical equilibrium solver into LOCI-Chem. Due to time and resource constraints, code optimization was not considered unless it was important to the proper functioning of the code.

Cox, Carey F.↗
NASA NTRS2008

Developing Optimized Trajectories Derived from Mission and Thermo-Structural Constraints

In conjunction with NASA and the Department of Defense, the Johns Hopkins University Applied Physics Laboratory (JHU/APL) has been investigating analytical techniques to address many of the fundamental issues associated with solar exploration spacecraft and high-speed atmospheric vehicle systems. These issues include: thermo-structural response including the effects of thermal management via the use of surface optical properties for high-temperature composite structures; aerodynamics with the effects of non-equilibrium chemistry and gas radiation; and aero-thermodynamics with the effects of material ablation for a wide range of thermal protection system (TPS) materials. The need exists to integrate these discrete tools into a common framework that enables the investigation of interdisciplinary interactions (including analysis tool, applied load, and environment uncertainties) to provide high fidelity solutions. In addition to developing robust tools for the coupling of aerodynamically induced thermal and mechanical loads, JHU/APL has been studying the optimal design of high-speed vehicles as a function of their trajectory. Under traditional design methodology the optimization of system level mission parameters such as range and time of flight is performed independently of the optimization for thermal and mechanical constraints such as stress and temperature. A truly optimal trajectory should optimize over the entire range of mission and thermo-mechanical constraints. Under this research, a framework for the robust analysis of high-speed spacecraft and atmospheric vehicle systems has been developed. It has been built around a generic, loosely coupled framework such that a variety of readily available analysis tools can be used. The methodology immediately addresses many of the current analysis inadequacies and allows for future extension in order to handle more complex problems.

Lear, Matthew H.↗
NASA NTRSDate not supplied

Recommended DSMC Collision Model Parameters for Planetary Entry

Hybrid simulation frameworks combining Computational Fluid Dynamics (CFD) and Direct Simulation Monte Carlo (DSMC) are frequently employed to efficiently perform high-fidelity simulations of environments consisting of both continuum and rarified flow. DSMC is a stochastic, particle-based method which solves the fundamental Boltzmann equation and is therefore necessary for high-Knudsen flow where continuum-based assumptions governing CFD break down. However, the DSMC methodology is generally computationally inefficient to model the continuum regime. In a CFD/DSMC hybrid approach, obtaining an accurate, high-fidelity solution hinges on the consistent treatment of transport properties and the thermo-chemical models employed within the two solvers. In principle, in regions where CFD and DSMC are both employed, the same gas mixture under the same conditions should have the same properties, regardless of simulation type. Observed differences should be due to non-equilibrium processes, rather than differences in physical models. The goal of this work is to provide a comprehensive DSMC transport database encompassing the vast majority of known gas species encountered during Earth or other planetary atmospheric entry. This goal is largely possible due to recently performed ab initio quantum chemistry calculations. Combined with other high-fidelity data, the planned database will consist of collision integral data for over 200 neutral and ionized species and over 20000 binary collisions. From these collision integrals, Nelder-Mead optimization is used to compute collision-specific Variable Soft Sphere (VSS) collision model parameters, fitted from 300 K to 20000 K. Initial comparisons of transport properties of relevant equilibrium gas mixtures show great agreement between CFD and DSMC-derived results. The completed database can be readily applied to model binary collisions of any gas mixture containing the included species over the specified temperature range, making it a valuable tool for future planetary probe modeling efforts. An example is shown below in Fig. 1. Equilibrium mixture transport properties for a 35-species mixture composed originally of 10% air and 90% pyrolysis species of a carbon-phenolic ablator material [4] are computed using both fitted VSS Parameters and the original CFD collision integral values. Deviations in computed properties between the two approaches are less than 5% for the entire temperature range.

M. R. Gosma↗
NASA NTRS1989

The photoevaporation of interstellar clouds. I - Radiation-driven implosion

An approximate analytical solution is developed for the evolution of an interstellar neutral cloud exposed to the ionizing radiation of a newly formed star. The structure of a steady photoevaporation gas flow off a spherical ionization front is derived even for cases where the ionization front cannot be considered thin, and the downstream flow is not in ionization and thermal equilibrium. Under a wide range of conditions, the ionization front is approximately D-critical, and the ionized gas expands supersonically into the intercloud medium. The ionization front typically drives a strong shock into the initial cloud.

Bertoldi, Frank↗
NASA NTRSDate not supplied

A Holistic DSMC Transport Database for Re-Entry and Ablation Modeling

Hybrid simulation frameworks combining Computational Fluid Dynamics (CFD) and Direct Simulation Monte Carlo (DSMC) are frequently employed to efficiently perform high-fidelity solutions of environments containing combined continuum/rarified flow. The use of DSMC, a stochastic, particle-based method, is necessary for high-Knudsen flow where continuum-based assumptions governing CFD break down. However, the DSMC methodology is generally very computationally inefficient to model the continuum regime. In a CFD/DSMC hybrid approach, obtaining an accurate, high-fidelity solution hinges on the consistent treatment of transport properties and the used thermo-chemical models employed within the two solvers. In principle, in regions where CFD and DSMC are both employed, the same gas mixture under the same conditions should have the same properties, regardless of simulation type. Observed differences should be due to non-equilibrium processes, rather than differences in physical models. While the transport models governing CFD and DSMC simulations are starkly different, they can effectively be linked via their use of reduced Chapman-Enskog collision integrals. In CFD, these integrals are typically stored as fitted polynomial expressions and used to directly compute gas transport properties via mixing rules or the full Chapman-Enskog formulation. In DSMC, they can be used to derive the collision parameters needed for the phenomenological collision cross-section models that govern particle interactions, via a Nelder-Mead optimization scheme. The goal of this work is to provide a unified DSMC transport database encompassing the vast majority of known gas species encountered during atmospheric entry, on Earth or any other Solar body. This goal is largely possible due to recently performed ab-initio quantum chemistry calculations. Combined with other high-fidelity literature sources, the planned database will consist of collision integral data for over 200 neutral and ionized species and over 17000 binary collisions. From these collision integrals, Nelder-Mead optimization is used to compute Variable Soft Sphere (VSS) collision model parameters for DSMC, fitted from 300 K to 20000 K. Initial comparisons of transport properties of relevant equilibrium gas mixtures show great agreement between CFD and DSMC-derived results. The completed database will be able to be readily applied to model binary collisions of any gas mixture containing the included species over the specified temperature range, making it a valuable tool for future planetary probe modeling efforts. An example is shown below. Equilibrium mixture transport properties for a 19-species Titan atmospheric model [4] are computed using both fitted VSS parameters and the original CFD collision integral values. Deviations in computed properties between the two approaches is less than 5% for the entire temperature range.

M R Gosma↗
NASA NTRS1971

The equilibrium and stability of the gaseous component of the galaxy, 3

The stability of a self-gravitating, nonrotating, isothermal gas layer threaded by a one-dimensional equipartition magnetic field, immersed in a rigid isothermal layer of stars, is considered with respect to waves with motions in and perpendicular to the X plane, where X is the equilibrium magnetic and gravitational field vectors. When motions are perpendicular to the X plane, the magnetic field hinders gravitational instability, increasing the minimum length necessary to produce instability by the factor (1 + alpha) to the 1/2 power, where alpha is the ratio of magnetic pressure to gas pressure. When motions are in the plane, no such simple analytical solution is found. However, the resulting system of equations reduces to a single fourth order differential equation in the perturbed gas potential that defines an eigenvalue problem for the marginally unstable state when the four appropriate boundary conditions are considered.

Kellman, S. A.↗