Search NASA⌕ Search

SEARCH · Search NASA

Results for “general relativity equations & solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Surfactant Facilitated Spreading of Aqueous Drops on Hydrophobic Surfaces

Microgravity technologies often require aqueous phases to spread over nonwetting hydrophobic solid surfaces. Surfactants facilitate the wetting of water on hydrophobic surfaces by adsorbing on the water/air and hydrophobic solid/water interfaces and lowering the surface tensions of these interfaces. The tension reductions decrease the contact angle, which increases the equilibrium wetted area. Hydrocarbon surfactants; (i.e., amphiphiles with a hydrophobic moiety consisting of an extended chain of (aliphatic) methylene -CH2- groups attached to a large polar group to give aqueous solubility) are capable of reducing the contact angles on surfaces which are not very hydrophobic, but do not reduce significantly the contact angles of the very hydrophobic surfaces such as parafilm, polyethylene or self assembled monolayers. Trisiloxane surfactants (amphiphiles with a hydrophobe consisting of methyl groups linked to a trisiloxane backbone in the form of a disk ((CH3)3-Si-O-Si-O-Si(CH3)3) and an extended ethoxylate (-(OCH2CH2)a-) polar group in the form of a chain with four or eight units) can significantly reduce the contact angle of water on a very hydrophobic surface and cause rapid and complete (or nearly complete) spreading (termed superspreading). The overall goal of the research described in this proposal is to establish and verify a theory for how trisiloxanes cause superspreading, and then use this knowledge as a guide to developing more general hydrocarbon based surfactant systems which superspread. We propose that the trisiloxane surfactants superspread because their structure allows them to strongly lower the high hydrophobic solid/aqueous tension when they adsorb to the solid surface. When the siloxane adsorbs, the hydrophobic disk parts of the molecule adsorb onto the surface removing the surface water. Since the cross-sectional area of the disk is larger than that of the extended ethoxylate chain, the disks can form a space-filling mat on the surface which removes a significant amount of the surface water. In this presentation, we report the results of measurements of the molecular packing and rates of kinetic exchange of the trisiloxane surfactants at the air/water interface in order to confirm our picture of trisiloxane packing, and provide additional insight into the superspreading process. We used the pendant bubble technique as a Langmuir trough to measure the trisiloxane equation of state which relates the tension to the surface concentration. From these measurements we obtain accurate values for the maximum packing density. We find that trisiloxanes with 4 and 8 ethoxylate groups have the same maximum packing concentration, indicating that the maximum packing is controlled by the cross section of the head group. For trisiloxanes with larger than eight ethoxylates, the maximum packing increases with ethoxylate number, indicating that the disposition of the ethoxylate chain (i.e., its effective size) is controlling. This supports our picture of superspreading: The superspreading ability of trisiloxanes decreases considerably for trisiloxanes with larger than eight ethoxylates; the packing measurements indicate that for the higher ethoxylate number trisiloxanes, the compact nonpolar head groups are pushed apart by the ethoxylate chain. They leave spaces of surface water on adsorption and do not lower the solid tension as much as their lower chain analogues. Finally the report measurements of the dynamic tension reduction accompanying the adsorption of trisiloxanes onto an initially clean interface using the pendant bubble technique, and we obtain from these relaxations, the equation of state and a mass transfer model, the rate constants for kinetic exchange. We find that the rate constants for desorption of trisiloxanes are generally much slower than for analogous aliphatic polyethoxylate surfactants with identical ethoxylate chain lengths. When an aqueous drop of a superspreader solution is placed on a hydrophobic surface and begins to spread, the lower desorption rates allows the tension at the drop center to remain reduced relative to the tension of the expanding periphery, thus strengthening Marangoni forces which can assist the spreading. Marangoni forces can be especially significant in the case of superspreaders because their maximum equilibrium reduction in tension is several dynes/cm lower than for aliphatic surfactants.

Kumar, Nitin↗

Investigation of the three-dimensional flow field within a transonic fan rotor: Experiment and analysis

An experimental investigation of the three dimensional flow field through a low aspect ratio, transonic, axial flow fan rotor has been conducted using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of through flow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three dimensional, unsteady Euler equations using an explicit time marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial by 30 axial by 50 blade to blade) permits details of the transonic flow field such as shock location, turning distribution and blade loading levels to be investigated and compared to analytical results.

Pierzga, M. J.↗

Interaction of transient radiation in nongray gaseous systems

A general formulation is presented to investigate the transient radiative interaction in nongray absorbing-emitting species between two parallel plates. Depending on the desired sophistication and accuracy, any nongray absorption model from line-by-line models to the wide band model correlations can be employed in the formulation to investigate the radiative interaction. Special attention is directed to investigate the radiative interaction in a system initially at a uniform reference temperature and suddenly the temperature of the bottom plate is reduced to a lower but constant temperature. The interaction is considered for the case of radiative equilibrium as well as for combined radiation and conduction. General as well as limiting forms of the governing equations are presented and solutions are obtained numerically by employing the method of variation of parameters. Specific results are obtained for CO, CO2, H2O, and OH. The information on species H2O and OH is of special interest for the proposed scramjet engine application. The results demonstrate the relative ability of different species for radiative interactions.

Tiwari, S. N.↗

Transient radiative energy transfer in nongray gases

A general formulation is presented to investigate the transient radiative interaction in nongray absorbing-emitting species between two parallel plates. Special attention is directed to investigate the radiative interaction in a system initially at a uniform reference temperature where suddenly the temperature of the bottom plate is reduced to a lower but constant temperature. The interaction is considered for the case of radiative equilibrium as well as for combined radiation and conduction. General as well as limiting forms of the govering equations are presented and solutions are obtained numerically by employing the method of variation of parameters. Specific results are obtained for CO, CO2, H2O, and OH. The information on species H2O and OH is of special interest for the proposed scramjet engine application. The results demonstrate the relative ability of different species for radiative interactions.

Tiwari, S. N.↗

A nonlocal theory of an electrostatic sinusoidal density drift instability

The stability of space plasmas in which the macroscopic variables vary in the direction x perpendicular to the magnetic field is usually studied by means of the local approximation, in which the fluctuating potential is assumed to be independent of x. To remove this approximation, a nonlocal problem is studied in which the background density, and hence the fluctuating potentials, are periodic in x. From the linear Vlasov/Poisson equations, a set of coupled, linear, homogeneous, algebraic equations relating the Fourier amplitudes of the eigensolution is derived. The equations are solved numerically and a hierarchy of exact eigenmodes characterized by different growth rates and spatial structures is found. At points where the density gradient is locally zero, the mode amplitude is generally several orders of magnitude lower than the peak amplitude. The dependence of these solutions on the parameters which define the background density perturbation is studied and a correspondence between these nonlocal results and those obtained with the local approximation is demonstrated.

Thomsen, M. F.↗

Investigation of the three-dimensional flow field within a transonic fan rotor - Experiment and analysis

An experimental investigation of the three-dimensional flow field through a low aspect ratio, transonic, axial flow fan rotor has been conducted, using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of throughflow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three-dimensional, unsteady Euler equations using an explicit time-marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial x 30 axial x 50 blade-to-blade) permits details of the transonic flow field such as shock location, turning distribution, and blade loading levels to be investigated and compared to analytical results.

Pierzga, M. J.↗

Laws of effluent dispersion in the steady-state atmospheric surface layer in stable and unstable conditions

The two-dimensional diffusion equation has been solved by an integral method to obtain the distribution of ground-level concentration of an inert effluent emitted from a semi-infinite area source in a steady-state and horizontally homogeneous atmospheric surface layer. Mean wind velocity and eddy diffusivity profiles derived from empirically determined flux-profile relations of Businger et al. (1971) for stable and unstable surface layers were used. It is found that concentration as a function of downwind distance can be described by a simple formula over distances of practical interest in surface layer dispersion. Corresponding results for a cross-wind infinite line source are obtained by simple differentiation. The concentration distribution is completely determined by the friction velocity, the Monin-Obukhov length, the roughness length, and the effluent source strength. The generalization of the integral method needed to obtain accurate solutions of the diffusion equation with the given wind velocity and diffusivity profiles is discussed in an appendix.

Lebedeff, S. A.↗

A Vector Study of Linearized Supersonic Flow Applications to Nonplanar Problems

A vector study of the partial-differential equation of steady linearized supersonic flow is presented. General expressions which relate the velocity potential in the stream to the conditions on the disturbing surfaces, are derived. In connection with these general expressions the concept of the finite part of an integral is discussed. A discussion of problems dealing with planar bodies is given and the conditions for the solution to be unique are investigated. Problems concerning nonplanar systems are investigated, and methods are derived for the solution of some simple nonplanar bodies. The surface pressure distribution and the damping in roll are found for rolling tails consisting of four, six, and eight rectangular fins for the Mach number range where the region of interference between adjacent fins does not affect the fin tips.

Martin, John C↗

Order-Reduced Solution of the Nonlinear High-Fidelity Generalized Method of Cells Micromechanics Relations

The High-Fidelity Generalized Method of Cells (HFGMC) is one technique for accurately simulating nonlinear composite material behavior. The HFGMC uses a higher-order approximation for the subcell displacement field that allows for a more accurate determination of the subcell stressstrain fields at the cost of some computational efficiency. In order to reduce computational costs associated with the solution of the ensuing system of simultaneous equations, the HFGMC global system of equations for doubly-periodic repeating unit cells with nonlinear constituents was reduced in size through the use of a Petrov-Galerkin-based Proper Orthogonal Decomposition order-reduction scheme. A number of cases were presented that address the computational feasibility of using order-reduction techniques to solve solid mechanics problems involving complex microstructures.

order-reduction↗

Weakly multi-dimensional cosmic-ray-modified MHD shocks

The multi-dimensional structure of weak, energetic-particle-modified shocks is investigated by means of appropriate perturbation techniques. The time-dependent shock-structure equation is found to be a generalized form of the well-known one-dimensional Burgers equation, whose steady state, in the absence of cosmic rays, is shown to be related to an equation modeling steady transonic flow in several dimensions. The time-dependent (1 + 2)- and (1 + 3)-dimensional Burgers equations are integrated exactly by means of Hirota's technique for one-shock solutions. On the basis of the exact solutions, a discussion relating the various length scales associated with the shock is presented.

Zank, G. P.↗

On Boundary-Value Problems for RANS Equations and Two-Equation Turbulence Models

Currently, in engineering computations for high Reynolds number turbulent flows, turbulence modeling continues to be the most frequently used approach to represent the effects of turbulence. Such models generally rely on solving either one or two transport equations along with the Reynolds-Averaged Navier–Stokes (RANS) equations. The solution of the boundary-value problem of any system of partial differential equations requires the complete delineation of the equations and the boundary conditions, including any special restrictions and conditions. In the literature, such a description is often incomplete, neglecting important details related to the boundary conditions and possible restrictive conditions, such as how to ensure satisfying prescribed values of the dependent variables of the transport equations in the far field of a finite domain. In this article, we discuss the possible influence of boundary values, as well as near-field and far-field behavior, on the solution of the RANS equations coupled with transport equations for turbulence modeling. In so doing, we defne the concept of a welldefined boundary-value problem. Additionally, a three-dimensional, rather than a simpler one-dimensional analysis is performed to analyze the near-wall and far-field behavior of the turbulence model variables. This allows an assessment of the decay rate of these variables required to realize the boundary conditions in the far field. This paper also addresses the impact of various transformations of two-equation models (e.g., the model of Wilcox) to remove the singular behavior of the dissipation rate (ω) at the surface boundary. Finally, the issue of well-posedness regarding the governing equations is considered. A compelling argument (although not a proof) for ill-posedness is made for both direct and inverse problems.

Navier–Stokes equations↗

Interlaminar stress analysis of dropped-ply laminated plates and shells by a mixed method

A mixed method of approximation based on Reissner's variational principle is developed for the linear analysis of interlaminar stresses in laminated composites, with special interest in laminates that contain terminated internal plies (dropped-ply laminates). Two models are derived, one for problems of generalized plane deformation and the other for the axisymmetric response of shells of revolution. A layerwise approach is taken in which the stress field is assumed with an explicit dependence on the thickness coordinate in each layer. The dependence of the stress field on the thickness coordinate is determined such that the three-dimensional equilibrium equations are satisfied by the approximation. The solution domain is reduced to one dimension by integration through the thickness. Continuity of tractions and displacements between layers is imposed. The governing two-point boundary value problem is composed of a system of both differential and algebraic equations (DAE's) and their associated boundary conditions. Careful evaluation of the system of DAE's was required to arrive at a form that allowed application of a one-step finite difference approximation. A two-stage Gauss implicit Runge-Kutta finite difference scheme was used for the solution because of its relatively high degree of accuracy. Patch tests of the two models revealed problems with solution accuracy for the axisymmetric model of a cylindrical shell loaded by internal pressure. Parametric studies of dropped-ply laminate characteristics and their influence on the interlaminar stresses were performed using the generalized plane deformation model. Eccentricity of the middle surface of the laminate through the ply drop-off was found to have a minimal effect on the interlaminar stresses under longitudinal compression, transverse tension, and in-plane shear. A second study found the stiffness change across the ply termination to have a much greater influence on the interlaminar stresses.

Harrison, Peter N.↗

Calculation of the transient motion of elastic airfoils forced by control surface motion and gusts

The time-domain equations of motion of elastic airfoil sections forced by control surface motions and gusts were developed for the case of incompressible flow. Extensive use was made of special functions related to the inverse transform of Theodorsen's function. Approximations for the special cases of zero stream velocity, small time, large and time are given. A numerical solution technique for the solution of the general case is given. Examples of the exact transient response of an airfoil are presented.

Balakrishnan, A. V.↗

Parallel triangularization of substructured finite element problems

Much of the computational effort of the finite element process involves the solution of a system of linear equations. The coefficient matrix of this system, known as the global stiffness matrix, is symmetric, positive definite, and generally sparse. An important technique for reducing the time required to solve this system is substructuring or matrix partitioning. Substructuring is based on the idea of dividing a structure into pieces, each of which can then be analyzed relatively indepenently. As a result of this division, each point in the finite element discretization is either interior to a substructure or on a boundary between substructures. Contributions to the global stiffness matrix from connections between boundary points from the K(bb) matrix are reported. The triangularization of a general K(bb) matrix on a parallel machine is specifically discussed.

Leuze, M. R.↗

Implicit finite-difference methods for the Euler equations

The present paper is concerned with two-dimensional Euler equations and with schemes which are in use of the time of this writing. Most of the development presented carries over directly to three dimensions. The characteristics of the two-dimensional Euler equations in Cartesian coordinates are considered along with generalized curvilinear coordinate transformations, metric relations, invariants of the transformation, flux Jacobian matrices and eigensystems, numerical algorithms, flux split algorithms, implicit and explicit nonlinear control (smoothing), upwind differencing in supersonic regions, unsteady and steady-state computation, the diagonal form of implicit algorithm, metric differencing and invariants, boundary conditions, geometry and mesh generation, and sample solutions.

Pulliam, T. H.↗

A study of efficiency in low resistivity silicon solar cells

A general device-analysis program has been utilized to study the efficiency of silicon solar cells. The analysis is applied to specific geometries of both n(+)-p and n(+)-p-p(+) solar cells, and involves a numerical solution of the basic transport and continuity equations. This approach allows solutions that are free of typical limiting assumptions involved in solving the device equations as well as solutions relating to lifetime, mobility variations, and diffused-region profiles. The analysis includes available empirical information on diffusion length, mobility, and lifetime as a function of doping, as well as a Gaussian profile for the diffused region. Results are presented which illustrate the limitations of efficiency as a function of doping. It is found that the maximum efficiencies for both types of cell converge at lower resistivities to around 16% with air-mass-zero radiation and a single-layer absorbing-SiO antireflecting film. It is also found that the minority-carrier lifetime, both in the n(+) surface and p-type bulk regions, presents serious limitations to conversion efficiency, particularly in the low-resistivity cells.

Dunbar, P. M.↗

Higher order accurate difference solutions of fluid mechanics problems by a compact differencing technique

A general fourth order differencing scheme is developed and applied to three viscous test problems to verify the accuracy and applicability of the technique. The procedure is atypical since only three nodes are necessary to obtain the desired fourth order accuracy. This is accomplished by a differencing technique which considers the function and all necessary derivatives as unknowns. The relations for these derivatives yield simple tridiagonal equations which can be easily solved. Comparisons of the fourth order results with those computed using second order methods are presented for the test problems and clearly indicate that the accuracy achieved by these fourth order computations is always significantly better than current second order procedures.

Hirsh, R. S.↗

An electromagnetic Thirring problem.

A neutral rotating mass shell surrounds a concentric stationary electrically charged insulating shell. The dipole-like magnetic field induced by (and proportional to) the rotation of the neutral shell is calculated on the basis of the coupled linearized Einstein-Maxwell field equations of general relativity. This field is apparently at variance with a conjecture made on Machian grounds, for which a possible explanation is suggested. The corresponding induced quadrupolar electric field is calculated for the region within the charged shell, and the potential is given for this field everywhere. Though understandable on mutually inconsistent elementary grounds, we regard this field as a useful example of a solution of linearized general relativity.-

Ehlers, J.↗