Search NASA⌕ Search

SEARCH · Search NASA

Results for “ground resolved”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Optimized pulsed sideband cooling and enhanced thermometry of trapped ions

Resolved sideband cooling is a standard technique for cooling trapped ions below the Doppler limit to near their motional ground state. Yet the most common methods for sideband cooling implicitly rely on low Doppler-cooled temperatures and tightly confined ions and they cannot be optimized for different experimental conditions. Here we introduce a framework which calculates the fastest possible pulsed sideband cooling sequence for a given number of pulses and set of experimental parameters and we verify its improvement compared to traditional methods using a trapped 171 Yb + ion. After extensive cooling, we find that the ion motional distribution is distinctly nonthermal and thus not amenable to standard thermometry techniques. We therefore develop and experimentally validate an improved method to measure ion temperatures after sideband cooling. These techniques will enable more efficient cooling and thermometry within trapped-ion systems, especially those with high initial temperatures or spatially extended ion wave packets.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Electronic Structure, Spectroscopy and Correlation Effects in Novel Materials

This project was targeted on electronic structure, spectroscopic studies, and correlation effects in a variety of novel materials of great current interest. Spectroscopies resolved highly in momentum, energy or spatial dimensions are playing a key role in unraveling the nature of the ground state and excitation properties in wide classes of novel materials. The seminal insights thus obtained are of critical importance not only for answering some of the fundamental questions facing condensed matter physics and materials science today, but also for understanding and thus helping to design and develop new materials with desirable properties, which will continue to be the key to the survival of mankind and its energy needs as a technological society long into the future. However, spectroscopies do not provide a direct map of electronic states, but act as a very complex ‘filter’ or ‘mapping’ of the underlying spectrum. This connection between the electronic states and measured spectra—called the ‘matrix element effect’—is in general an extremely complex function of the phase space of the experiment (e.g. energy/polarization of photons in photoemission), presenting both a challenge and an opportunity. So motivated, this project pursued techniques for realistic treatment of electronic spectra of a wide variety of materials, which served as a prelude to formulating and implementing methodologies for making direct connection with various spectroscopies such as ARPES, STS/STM, and inelastic light scattering. Specific systems are topological materials, including 2D ultrathin films beyond graphene, novel superconductors, and nanocrystals, among others. Our goal was to exploit the strengths of various spectroscopies to piece together the most complete picture of electronic states in systems of current interest, enabling direct and sharpened confrontations with theoretical models, and also to help advance the reach of various spectroscopies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Time-Gated, Time-Correlated Single-Photon-Counting Lidar to Observe Atmospheric Clouds at Submeter Resolution

Most lidars used for cloud observations have the range resolution of about 10 m, so they are incapable of resolving submeter-scale processes that are crucial to cloud evolution. This article describes a prototype of a ground-based, vertically pointing, time-gated, time-correlated single-photon-counting lidar (referred to as the T2 lidar) developed to explore atmospheric clouds at range resolution two orders of magnitude finer than traditional atmospheric lidars. The T2 lidar emits green-light pulses (532 nm) at a repetition rate of 20.6 kHz and a pulse width of ∼650 ps, which enables the observation of aerosol and cloud layers at heights from a few hundred meters to 7.28 km above the ground level at range resolution down to 10 cm. In addition, a digital delay pulse generator controls the detector to only receive photons for a short period after each laser pulse. This time-gated technique blocks photons arriving from regions outside the target zone, thus significantly reducing the noise level and allowing observation even inside clouds. Initial observations show that the T2 lidar can detect sharp cloud boundaries and fine structures near the cloud base. Such refined measurements of cloud structure could lead to an improved understanding of microphysical processes such as droplet activation, entrainment and mixing, and precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Fabrication Lessons Learned of Transportation Packaging from the Perspective of a Design Authority - 20322

This paper presents lessons learned regarding fabricating packaging systems from the perspective of a design authority (DA). Capturing and implementing lessons learned is critical for an organization to reduce systematic project risk and thereby promote the likelihood of project success. This paper defines the design authority as the organization responsible for technical design, resolving technical design issues, quality assurance program, and maintenance of the packaging system license. A package system is defined as the packaging, its contents, and auxiliary equipment. Packages are certified by the NRC under 10 CFR 71[1] for transportation by ground. The following lessons learned subjects are presented in the paper: quality assurance, interpretation of drawing dimensional requirements, execution of manufacturing processes, hardware dimensional inspection, and leakage rate testing. All discrepancies presented in this paper have been resolved as described in the appropriate final data package. All described package systems are in compliance with their Safety Analysis Report (SAR) and certificate of conformance requirements. The intent of this paper is to identify opportunities for improving the outcome of future projects and to mitigate fabrication challenges proactively. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Ultrafast Carrier Self-Trapping Driven by Strong Exciton–Phonon Coupling in 2D MA 3 Bi 2 I 6 Cl 3 Perovskite

Two-dimensional (2D) hybrid bismuth halide perovskites have emerged as promising lead-free materials for optoelectronic applications due to their solution processability and tunable structures. Here, in this study, we investigate 2D layered hybrid perovskite MA 3 Bi 2 I 6 Cl 3 using temperature-dependent photoluminescence (PL) and femtosecond transient absorption spectroscopy. Our results reveal strong coupling between excitons and phonons, evidenced by giant Huang–Rhys factors, coherent phonon oscillations, and ultrafast carrier self-trapping into small-polaron and self-trapped exciton (STE) states. These processes appear as time-dependent ground-state bleach and photoinduced absorption features, highlighting the influence of the lattice in carrier dynamics. Wavelength- and time-resolved measurements reveal that PL emission is dominated by STEs, while free exciton emission is weak and short-lived. By comparing 2D MA 3 Bi 2 I 6 Cl 3 with 0D MA 3 Bi 2 I 9 , which contains molecularly isolated [BiI 6 ] 3− octahedra and 2D MA 3 Bi 2 Br 9 perovskites, we demonstrate how halide composition and structural dimensionality influence the balance between free exciton populations and carrier localization. These insights uncover the intrinsic kinetic landscape of photoexcited states in MA 3 Bi 2 I 6 Cl 3 . Overall, our study contributes to a mechanistic understanding of exciton–phonon interactions in lead-free 2D perovskites.

Pradeep, Kodimana Ramakrishnan [Northwestern Univ.↗
DOE OSTI2022

Big Data Seismology

The discipline of seismology is based on observations of ground motion that are inherently undersampled in space and time. Our basic understanding of earthquake processes and our ability to resolve 4D Earth structure are fundamentally limited by data volume. Currently, Big Data Seismology is an emergent revolution involving the use of large, data-dense inquiries that is providing new opportunities to make fundamental advances in these areas. This article reviews recent scientific advances enabled by Big Data Seismology through the context of three major drivers: the development of new data-dense sensor systems, improvements in computing, and the development of new types of techniques and algorithms. Each driver is explored in the context of both global and exploration seismology, alongside collaborative opportunities that combine the features of long-duration data collections (common to global seismology) with dense networks of sensors (common to exploration seismology). The review explores some of the unique challenges and opportunities that Big Data Seismology presents, drawing on parallels from other fields facing similar issues. Finally, recent scientific findings enabled by dense seismic data sets are discussed, and we assess the opportunities for significant advances made possible with Big Data Seismology. This review is designed to be a primer for seismologists who are interested in getting up-to-speed with how the Big Data revolution is advancing the field of seismology.

58 GEOSCIENCES↗
DOE OSTI2023

Coherent detection of hidden spin–lattice coupling in a van der Waals antiferromagnet

Strong interactions between different degrees of freedom lead to exotic phases of matter with complex order parameters and emergent collective excitations. Conventional techniques, such as scattering and transport, probe the amplitudes of these excitations, but they are typically insensitive to phase. Therefore, novel methods with phase sensitivity are required to understand ground states with phase modulations and interactions that couple to the phase of collective modes. Here, by performing phase-resolved coherent phonon spectroscopy (CPS), we reveal a hidden spin–lattice coupling in a vdW antiferromagnet FePS 3 that eluded other phase-insensitive conventional probes, such as Raman and X-ray scattering. With comparative analysis and analytical calculations, we directly show that the magnetic order in FePS 3 selectively couples to the trigonal distortions through partially filled t 2 g orbitals. This magnetoelastic coupling is linear in magnetic order and lattice parameters, rendering these distortions inaccessible to inelastic scattering techniques. Our results not only capture the elusive spin–lattice coupling in FePS 3 but also establish phase-resolved CPS as a tool to investigate hidden interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Blanco DECam Bulge Survey (BDBS). VII. Multiple Populations in Globular Clusters of the Galactic Bulge

We present photometric evidence for multiple stellar populations (MPs) in 14 globular clusters (GCs) toward the southern Galactic bulge. The photometric data come as part of the Blanco DECam Bulge Survey, which is a deep, wide-field near-UV-near-IR (ugrizY) survey of the southern Galactic bulge. Here, we present the first systematic study of bulge GC multiple populations with deep photometry including the u band, which is a crucial indicator of the abundance of CNO-bearing molecules in stellar atmospheres. We identify cluster members using Gaia EDR3 proper motion measurements, and then isolate red giant branch stars using r versus u - r color–magnitude diagrams. We find evidence suggesting all 14 clusters host at least two populations, and NGC 6441, NGC 6626, and NGC 6656 appear to have at least three populations. Many of these clusters are not part of the Hubble Space Telescope (HST) surveys nor do they have comprehensive spectroscopic analyses so we are presenting the first evidence of MPs in several clusters. Not only do we find a strong anticorrelation between the fraction of first-generation stars and cluster absolute V magnitude, but the correlation coefficient and cluster-to-cluster scatter are similar to the results obtained from HST. Our ground-based data extend to much larger radial distances than similar HST observations, enabling a reliable estimate of the global fraction of first-generation stars in each cluster. This study demonstrates that ground-based u-band photometry as provided by DECam will prove powerful in the study of multiple populations in resolved GCs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

In-orbit operation of Resolve Filter Wheel and modulated X-ray source

The Resolve soft X-ray spectrometer is a high spectral resolution microcalorimeter spectrometer for the X-ray Imaging and Spectroscopy Mission. In the beam of Resolve, there is a filter wheel containing X-ray filters. In the beam, there is also an active calibration source, the modulated X-ray source (MXS), which can provide pulsed X-rays to facilitate gain calibration. The filter wheel consists of six filter positions. Two open positions, one 55 Fe source to aid in spectrometer characterization during the commissioning phase, and three transmission filters: a neutral density filter, an optical blocking filter, and a beryllium filter. The X-ray intensity, pulse period, and pulse separation of an MXS are highly configurable. Furthermore, the switch-on time is synchronized with the spacecraft’s internal clock to give accurate start and end times of the pulses. One of the issues raised during ground testing was the susceptibility of an MXS at high voltage to ambient light. Although measures were taken to mitigate the light leak, the efficacy of those measures must be verified in orbit. Along with an overview of issues raised during ground testing, we will discuss the calibration source and the filter performance in-flight and compare with the transmission curves present in the Resolve calibration database.

X-ray Imaging and Spectroscopy Mission/Resolve↗
DOE OSTI2025

Pre- and post-launch operation of the Resolve soft X-ray spectrometer onboard the XRISM satellite

Resolve is a high-resolution X-ray spectrometer onboard the X-Ray Imaging and Spectroscopy Mission (XRISM), launched on September 6 (UT), 2023. The Resolve has performed better than its required spectral resolution (7 eV at full width at half maximum at 6 keV), both on the ground and in orbit, and has been confirmed to have comparable performance to the soft X-ray spectrometer onboard the ASTRO-H (Hitomi) satellite. The focal plane is composed of an array of microcalorimeter detectors operated at 50 mK to achieve the required energy resolution, and the cooling system is designed to satisfy the lifetime requirement of over 3 years. The focal plane and cooling system are contained in a vacuum-insulated dewar. The cooling system is equipped with a two-stage adiabatic demagnetization refrigerator (ADR) that uses superfluid liquid helium (LHe) as its heat sink. The system includes a third ADR stage that can be used to provide the heat sink when the helium is exhausted. A Joule–Thomson cooler and several two-stage Stirling coolers are used to reduce the heat load on the LHe. During pre-launch operations, we carried out a superfluid LHe top-off operation. The resultant amount of LHe onboard Resolve was over 35 L before launch, which is sufficient to meet the lifetime requirement. During post-launch operation, the LHe vent valve was opened 5 min after launch during rocket acceleration, and the cryocoolers were turned on after several orbits, as planned, which established stable cooling within the dewar. Pre- and post-launch operations for the Resolve instrument were planned around multiple constraints from launch vehicle operations; all were successfully completed, and the launch requirements were fully met.

X-Ray Imaging and Spectroscopy Mission↗
DOE OSTI2025

A fully ro-vibrationally resolved corona model for the molecular hydrogen Fulcher-𝛼 system

A ro-vibrationally resolved corona model for the molecular hydrogen Fulcher-𝛼 transition based on the Yacora solver is introduced. The model couples 1365 ro-vibrational levels of the 𝑋 1 ⁢𝛴$^+_𝑔$, 𝑑 3⁢ 𝛱 𝑢 and 𝑎 3 ⁢𝛴$^+_𝑔$ states via electron impact excitation from the ground state into the 𝑑 3⁢ 𝛱 𝑢 state and subsequent spontaneous emission into the 𝑎 3 ⁢𝛴$+_𝑔$ state. For the process of electron impact excitation a set of 45260 fully ro-vibrationally resolved cross sections calculated with the molecular convergent close-coupling (MCCC) method in the adiabatic-nuclei formulation is applied. The MCCC cross sections are compared with results of a scaling method used in other works, demonstrating the need for dedicated ro-vibrationally resolved cross sections. By post-processing the model output, entire Fulcher spectra can be simulated. These spectra are benchmarked with measurements from an inductively coupled plasma discharge at a pressure between 1.1–10 Pa and a RF power of 700 W. The model results agree very well with the experiment both in relative shape and in absolute value. A non-ro-vibrationally resolved, purely electronically resolved collisional radiative model for molecular hydrogen (including further states and reaction channels) is applied to investigate the validity of the corona approximation for the benchmark plasmas and the relevance of possible process extensions of the corona model. Furthermore, the influence of collisional quenching, autoionization and predissociation is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Many roads to the seam: How conformational flexibility drives nonadiabatic relaxation in a prototypical tetrapyrrolic chromophore

Large and structurally flexible chromophores pose challenges for in silico modeling of photodeactivation due to the many vibrational modes that can funnel the system toward energy degeneracy. In this work, we examine how the multiple degrees of freedom in biliverdin, a prototypical tetrapyrrolic chromophore, cooperate to drive access to the S 1 /S 0 intersection seam in vacuo. We begin by mapping the ground-state potential energy surface to identify representative biliverdin conformers relevant to photoexcitation. We then use a CASSCF-based framework to map the excited-state landscape and characterize the intersection seam, identifying distinct conical-intersection types. Finally, we employ ab initio multiple spawning to resolve the dynamical pathways by which the system accesses these regions. DFT potential-energy and free-energy mappings indicate that, although several conformers are relevant, the “locked-helix” ZsZsZs conformer predominates in the ground state. The intersection seam comprises numerous geometrically distinct regions characterized by varying degrees and combinations of dihedral torsion, pyramidalization, and bond-length alternation. Yet only select regions lie within energetic reach, and moderate barriers separate them from the S 1 minimum. Nonadiabatic dynamics combined with multivariate analyses show that, despite extensive mode coupling during deactivation that guides the system toward multiple regions of the seam, a single dihedral torsion, together with bond-length alternation, predominantly drives energy degeneracy. This work offers new insight into biliverdin’s intrinsic photochemical response and underscores a general feature of flexible chromophores: many modes may participate during photorelaxation, but only a limited subset ultimately dictates seam accessibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Topotactic Reduction‐Driven Crystal Field Excitations in Brownmillerite Manganite Thin Films

Topotactic reduction of perovskite oxides offers a powerful approach for discovering novel phenomena, such as superconducting infinite-layer nickelates and polar metallicity, and is commonly accompanied by the emergence of multiple valence states and/or complex crystal fields of transition metals. However, understanding the complex interplay between crystal chemistry, electronic structure, and physical properties at the spin- and orbital-resolved levels in these reduced systems remains elusive. Here, in this study, x-ray absorption spectroscopy, resonant inelastic x-ray scattering (RIXS), and density functional theory calculations are used to uncover topotactic metal-insulator transition and orbital-specific crystal field excitations in brownmillerite La 0.67 Ca 0.33 MnO 2.5 thin films. The Mn valence states are found to be Mn 2+ /Mn 3+ , along with their corresponding populations at octahedral and tetrahedral sites, which effectively weaken the Mn-O hybridization compared to the parent perovskite phase. As a result, La 0.67 Ca 0.33 MnO 2.5 films exhibit an antiferromagnetic insulating ground state. Moreover, by combining the RIXS measurements on selected single-valence manganites, specifically MnO, LaMnO 3 , and CaMnO 3 , with orbital- and spin-resolved density-of-states calculations, the study identifies the dd excitations of octahedrally and tetrahedrally coordinated Mn 2+ /Mn 3+ ions, directly linking the microscopic electronic structure to the macroscopic magnetic/electrical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quasiparticle description of angle-resolved photoemission spectroscopy for SrCuO 2

SrCuO 2 has long been considered a near-archetypal realization of a quasi-one-dimensional (1D) system of interacting electrons with short-range interactions. Within this framework, experimental observations - interpreted through the lens of the 1D Hubbard model - suggest that electron and hole excitations decay into two types of (unphysical) collective bosonic modes: "spinons", which carry the spin degree of freedom, and "holons", which carry the charge degree of freedom. This model, known as spin-charge separation, is most directly evidenced by angle-resolved photoemission spectroscopy (ARPES), where a photo-induced hole decays into a continuum of these excitations. Here we present an alternative perspective grounded in first-principles, self-consistent, and parameter-free many-body perturbation theory. In this revised quasiparticle framework, ARPES can be understood as a one-body effect arising from mild disorder in a long-range antiferromagnetic ground state. the emergence of the so-called spinon branch arises naturally from spin disorder, the anomalous linewidths are accurately captured, and we provide a compelling explanation for the spectral weight observed at the non-magnetic zone boundary. This reinterpretation provides a unified explanation for key experimental signatures previously attributed to spin-charge separation, including features observed in optical conductivity. Additionally, we show that SrCuO 2 exhibits a nontrivial interchain coupling that significantly influences both its one-particle and two-particle spectral functions. By comparing the spectral features of SrCuO 2 with those of La 2 CuO 4 , we argue that SrCuO 2 shares notable similarities with the two-dimensional cuprates-both being rooted in a common CuO 4 plaquette-based molecular orbital framework.

1D cuprates↗
DOE OSTI2024

Rovibrationally resolved Rayleigh and Raman scattering cross sections for molecular hydrogen

Accurate Rayleigh and Raman scattering cross sections, tensor components, depolarization ratios, and reversal coefficients for all rovibrational transitions within the X1Σg+ ground electronic state of H2 have been calculated. Raman spectra have been generated using these data. A method for calculating Raman scattering cross sections is formulated that is valid below the ionization threshold and in the region containing resonances, which explicitly accounts for all bound and dissociative vibrational levels of the bound intermediate electronic states and approximately accounts for the ionization continuum. A representative set of cross sections is presented for incident photon energies below 15 eV and compared with existing results in the literature where possible. Convergence of our results with an increasing number of bound intermediate electronic states is demonstrated. The accuracy of the Placzek–Teller approximation is discussed. The effect of accounting for the intermediate ionization continuum is investigated. Local thermal equilibrium cross sections are calculated for Rayleigh and Raman scattering. This work represents the most accurate and complete treatment of Raman scattering for molecular hydrogen to date. A total of 9582 Rayleigh and Raman scattering cross sections have been generated and are openly available on Zenodo under an open-source Creative Commons Attribution license at https://zenodo.org/doi/10.5281/zenodo.13441471.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Probabilistic estimation of depth-resolved profiles of soil thermal diffusivity from temperature time series

Abstract. Improving the quantification of soil thermal and physical properties is key to achieving a better understanding and prediction of soil hydro-biogeochemical processes and their responses to changes in atmospheric forcing. Obtaining such information at numerous locations and/or over time with conventional soil sampling is challenging. The increasing availability of low-cost, vertically resolved temperature sensor arrays offers promise for improving the estimation of soil thermal properties from temperature time series, and the possible indirect estimation of physical properties. Still, the reliability and limitations of such an approach need to be assessed. In the present study, we develop a parameter estimation approach based on a combination of thermal modeling, sliding time windows, Bayesian inference, and Markov chain Monte Carlo simulation to estimate thermal diffusivity and its uncertainty over time, at numerous locations and at an unprecedented vertical spatial resolution (i.e., down to 5 to 10 cm vertical resolution) from soil temperature time series. We provide the necessary framework to assess under which environmental conditions (soil temperature gradient, fluctuations, and trend), temperature sensor characteristics (bias and level of noise), and deployment geometries (sensor number and position) soil thermal diffusivity can be reliably inferred. We validate the method with synthetic experiments and field studies. The synthetic experiments show that in the presence of median diurnal fluctuations ≥ 1.5 ∘C at 5 cm below the ground surface, temperature gradients > 2 ∘C m−1, and a sliding time window of at least 4 d the proposed method provides reliable depth-resolved thermal diffusivity estimates with percentage errors ≤ 10 % and posterior relative standard deviations ≤ 5 % up to 1 m depth. Reliable thermal diffusivity under such environmental conditions also requires temperature sensors to be spaced precisely (with accuracy to a few millimeters), with a level of noise ≤ 0.02 ∘C, and with a bias defined by a standard deviation ≤ 0.01 ∘C. Finally, the application of the developed approach to field data indicates significant repeatability in results and similarity with independent measurements, as well as promise in using a sliding time window to estimate temporal changes in soil thermal diffusivity, as needed to potentially capture changes in bulk density or water content.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Ground state rotational and kinetic temperatures of C 2 molecules in a laser-produced plasma

This study presents an experimental comparison between rotational and kinetic temperatures of molecular species in a laser-produced plasma, utilizing tunable laser absorption spectroscopy. We analyzed high-resolution and time-resolved absorption spectra of 31 rotational transitions within the Phillips A 1 II u –X 1 Σ g 3-0 band of the C 2 molecule, measured from a laser-produced graphite plasma in ~2 Torr argon, within the 771–781 nm spectral range. Spectral fitting provided quantitative state column densities of C 2 rotational energy levels in the ground electronic and vibrational states. Boltzmann analysis revealed thermalized rotational distributions showing rotational temperatures decreasing from 3000 to 600 K within 5–500 μs following the onset of the laser plasma. The measured kinetic and rotational temperatures of C 2 molecules are comparable, suggesting that collisional processes in the laser-produced plasma are sufficient to maintain thermal equilibrium between the C 2 molecules and the Ar background gas.

Absorption spectroscopy↗