SEARCH · Search NASA

Results for “gyro data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1973

High-reliability strapdown platforms using two-degree-of-freedom gyros.

This paper presents a new concept of high-reliability strapdown attitude sensing systems for space vehicles. Each system utilizes a set of redundant two-degree-of-freedom gyros. An optimum system configuration is obtained for maximum system reliability and the best measurement accuracy. Improved accuracy of the final data is obtained by using the least-square data reduction technique. Each system possesses a 'sensor performance management' feature which is capable of failure detection, faulty gyro identification, system reconfiguration, and, possibly, sensor recalibration. Improvement in reliability, as compared to other types of strapdown systems, is demonstrated. Details of the development are described in terms of a system containing four gyros.

Hung, J. C.↗

NASA NTRS2012

Small Aircraft Data Distribution System

The CARVE Small Aircraft Data Distribution System acquires the aircraft location and attitude data that is required by the various programs running on a distributed network. This system distributes the data it acquires to the data acquisition programs for inclusion in their data files. It uses UDP (User Datagram Protocol) to broadcast data over a LAN (Local Area Network) to any programs that might have a use for the data. The program is easily adaptable to acquire additional data and log that data to disk. The current version also drives displays using precision pitch and roll information to aid the pilot in maintaining a level-level attitude for radar/radiometer mapping beyond the degree available by flying visually or using a standard gyro-driven attitude indicator. The software is designed to acquire an array of data to help the mission manager make real-time decisions as to the effectiveness of the flight. This data is displayed for the mission manager and broadcast to the other experiments on the aircraft for inclusion in their data files. The program also drives real-time precision pitch and roll displays for the pilot and copilot to aid them in maintaining the desired attitude, when required, during data acquisition on mapping lines.

Chazanoff, Seth L.↗

NASA NTRS1977

Flight-control/navigation inertial reference system

The preliminary design of a redundant strapdown navigation system for integrated flight-control/navigation use has been completed. Based on application of tuned-gimbal gyros, a compact configuration (13 in x 13 in x 14 in) has been achieved for fail-operational/fail-operational redundancy. Test data are presented for strapdown system test programs including flight testing of the LN-50 tuned-gimbal gyro system. Testing of a redundant sensor configuration is currently in process. Strapdown gyro development also includes ring laser and nuclear magnetic resonance techniques.

Ebner, R. E.↗

NASA NTRS1995

A PC-based magnetometer-only attitude and rate determination system for gyroless spacecraft

This paper describes a prototype PC-based system that uses measurements from a three-axis magnetometer (TAM) to estimate the state (three-axis attitude and rates) of a spacecraft given no a priori information other than the mass properties. The system uses two algorithms that estimate the spacecraft's state - a deterministic magnetic-field only algorithm and a Kalman filter for gyroless spacecraft. The algorithms are combined by invoking the deterministic algorithm to generate the spacecraft state at epoch using a small batch of data and then using this deterministic epoch solution as the initial condition for the Kalman filter during the production run. System input comprises processed data that includes TAM and reference magnetic field data. Additional information, such as control system data and measurements from line-of-sight sensors, can be input to the system if available. Test results are presented using in-flight data from two three-axis stabilized spacecraft: Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) (gyroless, Sun-pointing) and Earth Radiation Budget Satellite (ERBS) (gyro-based, Earth-pointing). The results show that, using as little as 700 s of data, the system is capable of accuracies of 1.5 deg in attitude and 0.01 deg/s in rates; i.e., within SAMPEX mission requirements.

Challa, M.↗

NASA NTRS1997

Development of a Closed-Loop Strap Down Attitude System for an Ultrahigh Altitude Flight Experiment

A low-cost attitude system has been developed for an ultrahigh altitude flight experiment. The experiment uses a remotely piloted sailplane, with the wings modified for flight at altitudes greater than 100,000 ft. Mission requirements deem it necessary to measure the aircraft pitch and bank angles with accuracy better than 1.0 deg and heading with accuracy better than 5.0 deg. Vehicle cost restrictions and gross weight limits make installing a commercial inertial navigation system unfeasible. Instead, a low-cost attitude system was developed using strap down components. Monte Carlo analyses verified that two vector measurements, magnetic field and velocity, are required to completely stabilize the error equations. In the estimating algorithm, body-axis observations of the airspeed vector and the magnetic field are compared against the inertial velocity vector and a magnetic-field reference model. Residuals are fed back to stabilize integration of rate gyros. The effectiveness of the estimating algorithm was demonstrated using data from the NASA Dryden Flight Research Center Systems Research Aircraft (SRA) flight tests. The algorithm was applied with good results to a maximum 10' pitch and bank angles. Effects of wind shears were evaluated and, for most cases, can be safely ignored.

Whitmore, Stephen A.↗

DOE OSTI2024

Stability optimization of energetic particle driven modes in nuclear fusion devices: the FAR3d gyro-fluid code

The development of reduced models provide efficient methods that can be used to perform short term experimental data analysis or narrow down the parametric range of more sophisticated numerical approaches. Reduced models are derived by simplifying the physics description with the goal of retaining only the essential ingredients required to reproduce the phenomena under study. This is the role of the gyro-fluid code FAR3d, dedicated to analyze the linear and nonlinear stability of Alfvén Eigenmodes (AE), Energetic Particle Modes (EPM) and magnetic-hydrodynamic modes as pressure gradient driven mode (PGDM) and current driven modes (CDM) in nuclear fusion devices. Such analysis is valuable for improving the plasma heating efficiency and confinement; this can enhance the overall device performance. The present review is dedicated to a description of the most important contributions of the FAR3d code in the field of energetic particles (EP) and AE/EPM stability. FAR3d is used to model and characterize the AE/EPM activity measured in fusion devices as LHD, JET, DIII-D, EAST, TJ-II and Heliotron J. In addition, the computational efficiency of FAR3d facilitates performing massive parametric studies leading to the identification of optimization trends with respect to the AE/EPM stability. This can aid in identifying operational regimes where AE/EPM activity is avoided or minimized. This technique is applied to the analysis of optimized configurations with respect to the thermal plasma parameters, magnetic field configuration, external actuators and the effect of multiple EP populations. In addition, the AE/EPM saturation phase is analyzed, taking into account both steady-state phases and bursting activity observed in LHD and DIII-D devices. The nonlinear calculations provide: the induced EP transport, the generation of zonal structures as well as the energy transfer towards the thermal plasma and between different toroidal/helical families. Finally, FAR3d is used to forecast the AE/EPM stability in operational scenarios of future devices as ITER, CFETR, JT60SA and CFQS as well as possible approaches to optimization with respect to variations in the most important plasma parameters.

Alfv én Eigenmodes↗

NASA NTRS1993

Resolution of the COBE Earth sensor anomaly

Since its launch on November 18, 1989, the Earth sensors on the Cosmic Background Explorer (COBE) have shown much greater noise than expected. The problem was traced to an error in Earth horizon acquisition-of-signal (AOS) times. Due to this error, the AOS timing correction was ignored, causing Earth sensor split-to-index (SI) angles to be incorrectly time-tagged to minor frame synchronization times. Resulting Earth sensor residuals, based on gyro-propagated fine attitude solutions, were as large as plus or minus 0.45 deg (much greater than plus or minus 0.10 deg from scanner specifications (Reference 1)). Also, discontinuities in single-frame coarse attitude pitch and roll angles (as large as 0.80 and 0.30 deg, respectively) were noted several times during each orbit. However, over the course of the mission, each Earth sensor was observed to independently and unexpectedly reset and then reactivate into a new configuration. Although the telemetered AOS timing corrections are still in error, a procedure has been developed to approximate and apply these corrections. This paper describes the approach, analysis, and results of approximating and applying AOS timing adjustments to correct Earth scanner data. Furthermore, due to the continuing degradation of COBE's gyroscopes, gyro-propagated fine attitude solutions may soon become unavailable, requiring an alternative method for attitude determination. By correcting Earth scanner AOS telemetry, as described in this paper, more accurate single-frame attitude solutions are obtained. All aforementioned pitch and roll discontinuities are removed. When proper AOS corrections are applied, the standard deviation of pitch residuals between coarse attitude and gyro-propagated fine attitude solutions decrease by a factor of 3. Also, the overall standard deviation of SI residuals from fine attitude solutions decrease by a factor of 4 (meeting sensor specifications) when AOS corrections are applied.

Sedler, J.↗

NASA NTRS1996

Attitude and Trajectory Estimation Using Earth Magnetic Field Data

The magnetometer has long been a reliable, inexpensive sensor used in spacecraft momentum management and attitude estimation. Recent studies show an increased accuracy potential for magnetometer-only attitude estimation systems. Since the Earth's magnetic field is a function of time and position, and since time is known quite precisely, the differences between the computer and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both the spacecraft trajectory and attitude errors. Therefore, these errors can be used to estimate both trajectory and attitude. Traditionally, satellite attitude and trajectory have been estimated with completely separate system, using different measurement data. Recently, trajectory estimation for low earth orbit satellites was successfully demonstrated in ground software using only magnetometer data. This work proposes a single augmented extended Kalman Filter to simultaneously and autonomously estimate both spacecraft trajectory and attitude with data from a magnetometer and either dynamically determined rates or gyro-measured body rates.

Deutschmann, Julie↗

NASA NTRS2000

Antennas Designed for Advanced Communications for Air Traffic Management (AC/ATM) Project

The goal of the Advanced Communications for Air Traffic Management (AC/ATM) Project at the NASA Glenn Research Center at Lewis Field is to enable a communications infrastructure that provides the capacity, efficiency, and flexibility necessary to realize a mature free-flight environment. The technical thrust of the AC/ATM Project is targeted at the design, development, integration, test, and demonstration of enabling technologies for global broadband aeronautical communications. Since Ku-band facilities and equipment are readily available, one of the near-term demonstrations involves a link through a Kuband communications satellite. Two conformally mounted antennas will support the initial AC/ATM communications links. Both of these are steered electronically through monolithic microwave integrated circuit (MMIC) amplifiers and phase shifters. This link will be asymmetrical with the downlink to the aircraft (mobile vehicle) at a throughput rate of greater than 1.5 megabits per second (Mbps), whereas the throughput rate of the uplink from the aircraft will be greater than 100 kilobits per second (kbps). The data on the downlink can be narrow-band, wide-band, or a combination of both, depending on the requirements of the experiment. The AC/ATM project is purchasing a phased-array Ku-band transmitting antenna for the uplink from the test vehicle. Many Ku-band receiving antennas have been built, and one will be borrowed for a short time to perform the initial experiments at the NASA Glenn Research Center at Lewis Field. The Ku-band transmitting antenna is a 254-element MMIC phased-array antenna being built by Boeing Phantom Works. Each element can radiate 100 mW. The antenna is approximately 43-cm high by 24-cm wide by 3.3-cm thick. It can be steered beyond 60 from broadside. The beamwidth varies from 6 at broadside to 12 degrees at 60 degrees, which is typical of phased-array antennas. When the antenna is steered to 60 degrees, the beamwidth will illuminate approximately five satellites on the orbital arc. Spread spectrum techniques will be employed to keep the power impinging on the adjacent satellites below their noise floor so that no interference results. This antenna is power limited. If the antenna elements (currently 254) are increased by a factor of 4 (1024) or 16 (4096), the gain will increase and the beamwidth will decrease in proportion. For the latter two antenna sizes, the power must be "backed off" to prevent interference with the neighboring satellites. The receiving antenna, which is approximately 90-cm high, 60-cm wide, and 3.5-cm thick, is composed of 1500 phased-array elements. The system phased-array controller can control both a 1500-element receiving antenna and a 500-element transmitting antenna. For ground testing, this controller will allow manual beam pointing and polarization alignment. For normal operation, the system can be connected to the receiving antenna and the navigation system for real-time autonomous track operation. This will be accomplished by first pointing both antennas at the satellite using information from the aircraft data bus. Then, the system phased-array controller will electronically adjust the antenna pointing of the receiving antenna to find the peak signal. After the peak signal has been found, the beam of the transmitting antenna will be pointed to the same steering angles as the receiving antenna. For initial ground testing without an aircraft, the ARINC 429 data bus (ARINC Inc., Annapolis, Maryland) will be simulated by a gyro system purchased for the follow-on to the Monolithic Microwave Integrated Circuit (MMIC) Arrays for Satellite Communication on the Move (MASCOM) Project. MASCOM utilized the Advanced Communications Technology Satellite (ACTS) with a pair of Ka-band experimental phased-array antennas.

Zakrajsek, Robert J.↗

NASA NTRS1976

The Viking atmosphere structure experiment - Techniques, instruments, and expected accuracies

During high-speed entry and descent through the atmosphere of Mars, the two Viking spacecraft will make in situ measurements of the structure of the atmosphere. The profiles of temperature, pressure, and density with altitude will be defined from an altitude of about 100 km to touchdown, from measurements of the atmospherically induced deceleration and directly measured temperatures and pressures, the latter at altitudes below about 20 km. These data will be supplemented by onboard-radar altitudes and, below 8 km, by three-component Doppler radar velocities. Winds will be derived from the Doppler velocities and from gyro records of vehicle attitude changes. The planet radius at the landing site, needed to interpret the atmospheric data, will be defined to within a few tenths of a kilometer from the measured acceleration due to gravity after landing. It is expected that temperature will be determined to within about 1 K in the lower atmosphere, and to within a few degrees up to 100 km; pressures to within a few percent; and wind velocities to within about 2 meters/second below 8 km.

Seiff, A.↗

NASA NTRS1977

Attitude determination techniques for Nimbus 6 and Nimbus G

Techniques for measuring attitude deviations in the Nimbus 6 and Nimbus G 3-axis stabilized, zero-momentum, earth observation satellites are presented. The on-orbit telemetered data include scanner roll and pitch error signals, an illuminated DSAS which can read the azimuth and elevation of the sunline when the spacecraft is not in the umbra, the signal from the single gyro in the RMP, and the momenta of the reaction wheels. Mathematical methods for interpreting the measured data are described with attention to filter equations, especially the Kalman filter because of its ability to eliminate high frequency noise.

Das, A.↗

NASA NTRS2017

Simple Analytical Expressions for Electron Pitch Angle Diffusion Coefficients

In the present paper, we have calculated electron pitch angle diffusion coefficients due to resonant interactions with whistler mode lower band chorus (LBC), upper band chorus (UBC), and electrostatic electron cyclotron harmonic (ECH) waves. Calculations have been performed at two values of the ratio of electron plasma frequency to gyro-frequency and thirteen representative values of electron energies for the plasma sheet electrons. The numerical data of diffusion coefficients have been fitted to simple analytical expressions for each wave mode. These analytical expressions allow for simple evaluation of pitch angle diffusion coefficients for the arbitrary pitch angle, energy, the ambient magnetic field, the wave amplitude, and the ratio of plasma frequency to gyro-frequency. In the case of LBC waves, the analytical coefficients are generally within a factor of two to the numerical coefficients, except at higher pitch angles where the numerical coefficients drop to show negligible values. Likewise, also for UBC waves, the analytical coefficients are generally within a factor of two to the numerical coefficients. The analytical coefficients for ECH waves are generally in agreement with numerical coefficients. However, the analytical expressions developed for ECH waves do not reproduce sharp fluctuations, dips, and gaps, the so-called banded structure observed in the data of numerical coefficients. The effect of the shape variation on the profile of the wave spectral intensity and the effect of cold temperature on the numerical coefficients are also investigated. Applications of the analytical expressions of diffusion coefficients are discussed.

coefficients↗

NASA NTRS1974

In-orbit performance of the OAO inertial reference unit

Performance of the inertial reference unit (IRU) in the Orbiting Astronomical Observatory (OAO-C) is documented. The OAO and IRU are briefly described along with the data reduction programs used to calibrate the IRU in orbit. Application of gyros with good long-term drift stability to future spacecraft such as the Large Space Telescope and Earth Observatory Satellite is discussed.

Harris, R. A.↗

NASA NTRS1981

Inertial attitude determination for a dual-spin planetary spacecraft

Design and performance evaluations of an onboard inertial attitude determination system for a dual-spin planetary spacecraft are presented. A quaternion integration algorithm and a rate estimator sequentially determine the scan platform's inertial attitude and rate from the drift and misalignment compensated gyro outputs. A least-squares estimator algorithm processes the star transit data from a rotor-mounted star scanner, and provides periodic updates of the scan platform's attitude as a means of correcting the drift of the quaternion integration algorithm. Computer simulated algorithm performance in the presence of nutation and sensor noise are presented.

Wong, E. C.↗

NASA NTRS1975

In-orbit performance of the OAO inertial reference unit

The Inertial Reference Unit (IRU) used in NASA's Orbiting Astronomical Observatory uses three single degree of freedom, floated, rate-integrating gyros operated in binary, pulse-restrained torque loops to provide an inertial attitude reference for the spacecraft's attitude control system. The drift rates observed on these inertial grade gyros during the 1 1/2 year of in-orbit operation have remained within a band of 16 arcsec per hour peak-to-peak. When the effects of known disturbances are considered, the standard deviation of drift rate appears to approach one arcsec per hour. Included in this paper are a brief description of the OAO and IRU, a summary of the data reduction programs used to calibrate the IRU in orbit, and some thoughts on how gyros with good long-term drift stability could be applied to future spacecraft such as the Large Space Telescope and Earth Observatory Satellite.

Harris, R. A.↗

NASA NTRS1990

Optimization of the effective GPS data rate

Ohio University's Avionics Engineering Center is performing research directed towards the integration of the NAVSTAR Global Positioning System (GPS) and the Inertial Navigation System (INS) for attitude and heading determination. The integration of GPS/INS offers synergistic benefits. INS gyro drift error can be compensated by the long-term stability of GPS by means of an in-flight data monitoring algorithm. Using GPS data as a reference is more advantageous than implementing an additional INS since GPS offers a dissimilar redundancy to the attitude and heading determination configuration. In converse, the short-term stability of the INS can be used to correct or substitute for faulty GPS data due to tracking loop phase lag or data gaps because of satellite shielding. The optimization of the effective GPS data rate is essential for the proper execution of an integrated GPS/INS in-flight algorithm. GPS attitude and heading information must be consistently available during INS outages. Present research efforts involve the development of an in-flight algorithm that maximizes the potential of integrated GPS/INS. This algorithm determines the acceptable limits of phase lag that the GPS tracking loop introduces to the flight control system (FCS) during the transmission of information. Once these calculated limits are exceeded, INS data are used to insure the continuous availability of attitude and heading information to the flight control system.

Mcintyre, David S.↗

NASA NTRS1991

Dynamics modeling for ERBS attitude propagation

The development and evaluation of a model of the Earth Radiation Budget Satellite (ERBS) attitude dynamics for use in attitude determination is described. Attitude rates for the three axis stabilized spacecraft are derived analytically from Euler's equation using modeled disturbance torques and telemetered flight data from control system actuators for computation of the control torques. The modeled rates are used for attitude propagation in a batch least squares attitude estimation algorithm originally designed to use onboard gyro measurements of attitude motion. The capabilities for near fine attitude determination without gyros is important for operational attitude ground support of the aging ERBS spacecraft as two out of three gyro axes have failed. The accuracy of this method of dynamic propagation is strongly dependent on the quality and availability of control system telemetry data. Detailed disturbance torque models are also necessary to accurately model attitude rates. Even with the relatively coarse ERBS control system telemetry, accuracy to within 0.2 deg of gyro propagated reference attitudes is achieved.

Harvie, E.↗

NASA NTRS1972

In-flight angular alignment of inertial navigation systems by means of radio aids

The principles involved in the angular alignment of the inertial reference by nondirectional data from radio aids are developed and compared with conventional methods of alignment such as gyro-compassing and pendulous vertical determination. The specific problem is considered of the space shuttle reentry and a proposed technique for the alignment of the inertial reference system some time before landing. A description is given of the digital simulation of a transponder interrogation system and of its interaction with the inertial navigation system. Data from reentry simulations are used to demonstrate the effectiveness of in-flight inertial system alignment. Concluding remarks refer to other potential applications such as space shuttle orbit insertion and air navigation of conventional aircraft.

Tanner, W.↗