SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is the AmeriFlux version of the carbon flux data for the site US-PFo SE1 Lake-2 CHEESEHEAD 2019. Site Description - This tower (1.17m buoy) is located in the southeastern quadrant of the 10 x 10km study domain. It is located on a buoy (1.17 m asl) in the center of a small bog lake (50-70 m across) surrounded by mixed hardwood forest (maple, oak) about 16 m high.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-TPD Ontario - Turkey Point Mature Deciduous. This is the FLUXNET version of the carbon flux data for the site CA-TPD Ontario - Turkey Point Mature Deciduous produced by applying the standard ONEFlux (1F) software. Site Description - The forest is approximately 90 years old. Naturally regenerated on sandy terrain and abandoned agricultural land. Predominantly hardwood species with a few scattered conifers. Site has been managed (thinned) in the past. It has a high biodiversity with 573 tree and plant species, 102 bird species, 23 mamal species and 22 reptile and amphibian species (SWALSREP Report, 1999). The dominant tree species is white oak (Quercus alba), with other scattered broadleaf Carolinian species including sugar and red maple (Acer saccharum, A. rubrum), American beech (Fagus grandifolia), black and red oak (Q. velutina, Q. rubra) and white ash (Fraxinus americana) . There are also scattered conifers, mostly white and red pine (Pinus strobes, P. resinosa), comprising about 5% of the trees. Average tree height is 25.7 m with a stand density of 504 ± 18 trees per hectare. Average tree diameter at breast height is 22.3 cm and basal area is 0.06 m2 or approximately 29 square meters per hectare.
This is the AmeriFlux version of the carbon flux data for the site US-Cst Crossett Experimental Forest. Site Description - The study takes place in the Crossett Experimental Forest (CEF, 32°2′ N, 91°57′ W), which was established in 1934 with the objective of developing effective management protocols for loblolly and shortleaf pine forests in the Gulf Coastal Plain. Mean annual temperature and precipitation are 17.6 °C and 1,410 mm, respectively. Most of the soils on and near the CEF are silt loams (primarily Glossaquic Fragiudalfs). The tower is situated in the the old-growth pine management sector of the CEF, which emphasizes management for old-growth-like conditions, with the goal of emulating the structural and compositional attributes of historic forests from this region using a combination of timber harvesting, prescribed fire, and other tools. This includes periodic commercial logging of intermediate-sized loblolly pines to support further restoration treatments, such as prescribed fire, hardwood and exotic species competition control, and the increase of plant species more compatible with fire (e.g., shortleaf pine and understory grasses)
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-NC1 NC_Clearcut. This is the FLUXNET version of the carbon flux data for the site US-NC1 NC_Clearcut produced by applying the standard ONEFlux (1F) software. Site Description - The North Carolina Clearcut site is located in a pine plantation amongst the mixed forests of the North Carolina lower coastal plain. Owned by the Weyerhaeuser Company, the plantation is managed for the purpose of commercial logging. In 2004, 70 ha of 75 year old native hardwoods was harvested. Following the clearcut, the stand was bedded and planted with loblolly pine seedlings. The only significant natural disturbances during the measurement period was a severe drought that lasted from summer of 2007 through 2008. Consequently, the 2007 total amount of precipitation was 486 mm below the 30-year norm.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-xUK NEON The University of Kansas Field Station (UKFS). This is the FLUXNET version of the carbon flux data for the site US-xUK NEON The University of Kansas Field Station (UKFS) produced by applying the standard ONEFlux (1F) software. Site Description - Along an eastern deciduous forest and tallgrass prairie transition zone just north of Lawrence, Kansas, this 6 km2 terrestrial field site is located at the University of Kansas Field Station. A 116' tall flux tower rises out of a mixed hardwood forest dominated by white ash trees. Field obdservations of plants, animals, soils and microbes are collected around the tower and in the nearby tallgrass prairie.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-BRG Bayles Road Grassland Tower. This is the FLUXNET version of the carbon flux data for the site US-BRG Bayles Road Grassland Tower produced by applying the standard ONEFlux (1F) software. Site Description - The Bayles Road grassland tower is situated in an experimental field incorporated within the Indiana University Research and Teaching Preserve. The field was historically covered by bottomland hardwood forest and later maintained for plant genetics studies. Intermixed species of grasses, sedges, and forbs are currently maintained with occasional mowing.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-UMB Univ. of Mich. Biological Station. This is the FLUXNET version of the carbon flux data for the site US-UMB Univ. of Mich. Biological Station produced by applying the standard ONEFlux (1F) software. Site Description - The UMBS site is located within a protected forest owned by the University of Michigan. Arboreal composition of the forest consists of mid-aged northern hardwoods, conifer understory, aspen, and old growth hemlock. Logging of local white pines began in 1879. In successive years, several other species were harvested. Logging was discontinued in 1980 when the land became protected under the private ownership of the University of Michigan. Patchy low- to high-intensity wildfires occurred yearly from 1880 - 1920, essentially burning the entire region.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Akn Savannah River Site. This is the FLUXNET version of the carbon flux data for the site US-Akn Savannah River Site produced by applying the standard ONEFlux (1F) software. Site Description - The site is characterized by a mix of pine and deciduous hardwood forests with a general canopy height of 25m which was established in the 1950s. Management of the forest around the site is performed by the USFS-Savannah River and consists of prescribed burning of the understory on a 3-4 year cycle.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Cst Crossett Experimental Forest. This is the FLUXNET version of the carbon flux data for the site US-Cst Crossett Experimental Forest produced by applying the standard ONEFlux (1F) software. Site Description - The study takes place in the Crossett Experimental Forest (CEF, 32°2′ N, 91°57′ W), which was established in 1934 with the objective of developing effective management protocols for loblolly and shortleaf pine forests in the Gulf Coastal Plain. Mean annual temperature and precipitation are 17.6 °C and 1,410 mm, respectively. Most of the soils on and near the CEF are silt loams (primarily Glossaquic Fragiudalfs). The tower is situated in the the old-growth pine management sector of the CEF, which emphasizes management for old-growth-like conditions, with the goal of emulating the structural and compositional attributes of historic forests from this region using a combination of timber harvesting, prescribed fire, and other tools. This includes periodic commercial logging of intermediate-sized loblolly pines to support further restoration treatments, such as prescribed fire, hardwood and exotic species competition control, and the increase of plant species more compatible with fire (e.g., shortleaf pine and understory grasses)
This is the AmeriFlux version of the carbon flux data for the site CA-AF1 Acadia Research Forest. Site Description - The site is located in the Acadia Research Forest (managed by the Canadian Forest Service). The research forest is representative of the Acadian Forest Region in New Brunswick and Nova Scotia and comprises of mixed forest containing softwood, hardwood, and mixed-wood stands. The forest is managed and features different forest composition depending on management history.
This is the AmeriFlux version of the carbon flux data for the site US-NC5 NC Butner Farm. Site Description - The US-NC5 flux tower is located within an 80-year-old mixed pine-hardwood forest at the Umstead Research Farm in Butner, North Carolina. The northern section of this 20-hectare Fall Lake Watershed of the Neuse River Basin in the Piedmont of North Carolina, USA. The Northern portion is currently a managed cattle farm, which is slated for expansion—necessitating forest clearing in the flux site. To establish a reference baseline, a year-long, all-season eddy covariance flux monitoring campaign will be conducted from April 2025 to March 2026. This effort aims to capture the carbon flux dynamics of the mature forest ecosystem prior to a planned land-use conversion. The site will be transitioned into a silvopasture, maintained through prescribed burning and cattle grazing to promote an open-canopy watershed structure. Flux measurements will continue after the conversion.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-xLE NEON Lenoir Landing (LENO). This is the FLUXNET version of the carbon flux data for the site US-xLE NEON Lenoir Landing (LENO) produced by applying the standard ONEFlux (1F) software. Site Description - This terrestrial field site is located in a hardwood bottomland with seasonal flooding each spring located in southwest Alabama. The meteorological/flux tower and tower sampling plots are located at Lenoir Landing and the distributed plots are located approximately 5 km south of the tower at Choctaw National Wildlife Refuge. The ecosystem at LENO is dominated by closed-canopy pine-oak mixed forest with a developed understory, and also includes a small fraction of meadows, wetlands, and smaller water bodies. Dominant plant species include American sweetgum (Liquidambar styraciflua), American hornbeam (Carpinus caroliniana), and loblolly pine (Pinus taeda). Choctaw National Wildlife Refuge also provides a protected wintering area for waterfowl and wood duck brood habitat. This site is colocated with the Lower Tombigbee river aquatic site.
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-NC5 NC Butner Farm. This is the FLUXNET version of the carbon flux data for the site US-NC5 NC Butner Farm produced by applying the standard ONEFlux (1F) software. Site Description - The US-NC5 flux tower is located within an 80-year-old mixed pine-hardwood forest at the Umstead Research Farm in Butner, North Carolina. The northern section of this 20-hectare Fall Lake Watershed of the Neuse River Basin in the Piedmont of North Carolina, USA. The Northern portion is currently a managed cattle farm, which is slated for expansion—necessitating forest clearing in the flux site. To establish a reference baseline, a year-long, all-season eddy covariance flux monitoring campaign will be conducted from April 2025 to March 2026. This effort aims to capture the carbon flux dynamics of the mature forest ecosystem prior to a planned land-use conversion. The site will be transitioned into a silvopasture, maintained through prescribed burning and cattle grazing to promote an open-canopy watershed structure. Flux measurements will continue after the conversion.
Thermal dissipation (TD) sensors have been used extensively for a wide array of sap flow applications, and yet recently several limitations of this approach have been identified, including a tendency to underestimate absolute flows, especially in small stems with very high flows. However, when used properly, the TD method remains the most cost effective and reliable approach for determining relative flows in comparison studies. Major advantages of this method include the ability to replicate maximally within trees, across trees of different sizes, and across multiple species to capture the full range of natural variation in the study system. From early studies, such variation has been deemed a major challenge for representing stand-level dynamics. In a series of recent comparison studies, we determined mean sap flux density dynamics within and among groups of trees. These studies were conducted within temperate coniferous forest (n=46), temperate oak savanna (n=36), temperate pine forest (n=49), temperate bottomland hardwood forest (n=23), tropical premontane rainforest (n=43), semiarid subtropical shrubland (n=25), and tropical dry forest (n=15), with a total of 237 sensors. Two study sites were also equipped with eddy covariance systems for determination of stand-level evapotranspiration. Sites subject to high background thermal gradients used the transient thermal dissipation method. Comparisons varied between studies but tended to focus on relative flow differences between species, between wetter and drier microsites, between understory and overstory components, or between wetter and drier periods of the growing season. Except for the shrubland sites, study trees tended to be at least 15-cm diameter and frequently exceeded 50-cm diameter. Results of this cross-site comparison highlight the inherent variation in natural stands and the importance of using large sample sizes. The TD approach remains a valuable and preferred method for the future determination of water use in trees. However, sensor replication can fundamentally impact a study's outcomes and should be more carefully considered in study design. Customized error mitigation strategies are best to address the sources of variation most problematic for a particular study. In conclusion, the development of “smart” calibration approaches that correct for fundamental effects of radial variation inherent in thermal dissipation studies is discussed.
Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing resulting in higher combustion efficiency and the ability to use lower quality fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions. SO 2 emissions are conveniently controlled through the addition of Ca-based sulphur sorbents within the combustor. This report summarizes the current modeling effort on a 50 kW th CFB combustor with a diameter of 10 cm and a height of 5 m; designed, built, and operated at CanmetENERGY in Ottawa, Canada employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using 9 kg of olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture the physics and chemistry of a circulating fluidized bed combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.
Wild pig (Sus scrofa) social unit organization was compared in three introduced populations in the southeastern United States. Group size, age and sex composition and types of social unit were recorded from field observations. Groups of two or more individuals were significantly more frequent than solitary animals in all three populations. Mixed adult/immature groups were the largest social unit of two or more individuals, followed by groups of immature animals and the various types of adult groups. In two of the populations, this same trend among these groups types was seen for the frequency of occurrence (i.e., with the adult/immature group being the most common). In the third population, the frequency of the adult/immature and immature-only groups were reversed. Size variation within all except the mixed-sex adult group type was similar among the three field sites. Adult males were the most frequently observed solitary category. Increased percentage of hardwood forest was significantly correlated with a decrease in the percent frequency of immature-only groups and an increase in adult/immature groups. Increasing annual harvest by man was significantly correlated with an increase in the frequency of immature-only groups and a decrease in those of adults/immatures. The biased removal of females through trapping would be consistent with the apparent shift from adult/immature groups to immature-only groups among the three field sites.
The series of experiments have been performed on a 2.5-inch cylindrical bed made of acrylic with full optical access and multiple pressure ports at various heights of the bed. The material of interest includes in the investigation include Geldart type D cylindrical hardwood pellets, Geldart type D spherical LDPE, and Geldart type B sand particles. The wood particles have a diameter of around 6.6 mm and a length of 13.2 mm, corresponding to an aspect ratio of 1:2. The spherical LDPE particles and the sand particles have a Sauter Mean Diameter of 3.75 mm, and 0.5 mm, respectively. The experiment series involved the fluidization of the above-mentioned single particle type, as well as the fluidization of binary and ternary mixtures with varying superficial velocities.
The global composite industry generates large quantities of waste and which mostly end as landfill due to lack of meaningful end-use applications for the multiple waste streams. In a recent report by the Electric Power Research Institute (EPRI), waste generated by the wind industry could reach 370,000 tons a year of composite wind energy blades being decommissioned and scrapped. Wind energy is just one major industry utilizing composite materials. The waste generated by industry includes End-of-Life (EoL) materials and manufacturing process scrap. GreenTex Solutions has developed a unique and innovative technology to recycle the composite waste streams in a range of forms made from production waste and EoL materials. This includes manufacturing waste materials such as dry chopped fiber tow, loose fibers, shredded fibers from reinforcement fabrics, cured/semi-cured prepregs, and it also includes fully-cured composite structure waste (such as edge trims from cured parts) from manufacturing aircraft, automobiles, wind blades, boats, and composite cylinders (tanks). Current recycling methods involve recovering the structural fiber by removing the matrix resin through methods such as pyrolysis. The resulting fibers are used in injection molding or wet laid nonwoven mats and other usable forms. The GreenTex technology bypasses these intermediate steps to create the lowest possible recycling processing costs and the lowest embodied energy/CO2 emissions. The end-product from the GreenTex technology is a finished industrial composite part/application versus intermediate fibers or fabrics. The GreenTex manufacturing process enables cross-industry reuse of recycled feedstock by taking waste from multiple industries (wind energy, aerospace, marine, etc.) and recycles the waste into a product used in other industries. The initial target market application is structural flooring for intermodal shipping containers and truck bodies. One of the team’s key partners is Wabash National which produced 29,000 truck bodies in 2019. The current flooring system is comprised of solid oak “butcher board” laminated panels. Additionally, Mediterranean Shipping Containers (MSC) transports over 1.8 million twenty-foot equivalent units per year in intermodal shipping containers. The current container floor is laminated hardwood that is harvested from the rain forests of Central and South America. The project is to develop a flooring system made from recycled composites that can be qualified for both companies (Wabash and MSC). Initial prototypes validated that the recycled composites panels are lighter and thinner with much higher mechanical strength. These results suggest a typical truck trailer would have 20% lower tare weight. The GreenTex technology is not limited to flooring and is widely applicable to other transportation elements such as walls, roof elements, cab areas and related structural components. Under this project different composite waste streams were evaluated and then combined to develop a formulation that would meet the targeted performance criteria for a flooring system. Wet compression molding was used to fabricate plaques at different tonnage using various composite waste streams. The plaques were tested for flexure and impact.