Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterojunctions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Real-Space Constrained Density Functional Theory Investigation of Site-Specific, Interfacial Charge Recombination Dynamics Across the Au Nanoparticle/TiO 2 Heterojunction

Au nanoparticle (NP)/TiO 2 heterojunction is a representative system to study interfacial charge transfer in photocatalysis and photovoltaics, where suppressing recombination from TiO 2 to Au can enhance hot carrier extraction. We apply real-space constrained density functional theory (CDFT) with Marcus theory to quantify charge recombination time scales across Au/TiO 2 . This approach enables direct control and visualization of charge-separated states, aligning with site-specific probes like time-resolved X-ray photoelectron spectroscopy (trXPS). We find that the charge-separated state features a bipolaron, with recombination dominated by TiO 2 LUMO to Au HOMO transitions, primarily at interfacial Au sites. Marcus rate predictions are benchmarked with surface hopping methods, quantifying differences in time scales and computational efficiency. Lastly, we examine how the Au cluster size affects the free energy change (ΔG) and reorganization energy (λ), explaining trends in closed-shell systems and highlighting challenges for open-shell extrapolations. Overall, CDFT + Marcus theory provides efficient, mechanistically transparent interfacial charge transfer modeling, and we clearly defined its applicability and limitation.

Glenna, Drew M. [Univ. of Idaho, Idaho Falls, ID (↗
DOE OSTI2020

Universal and versatile morphology engineering via hot fluorous solvent soaking for organic bulk heterojunction

After explosive growth of efficiency in organic solar cells (OSCs), achieving ideal morphology of bulk heterojunction remains crucial and challenging for advancing OSCs into consumer market. Herein, by utilizing the amphiphobic nature and temperature-dependent miscibility of fluorous solvent, hot fluorous solvent soaking method is developed to optimize the morphology with various donor/acceptor combinations including polymer/small-molecule, all-polymer and all-small-molecule systems. By immersing blend film into hot fluorous solvent which is utilized as liquid medium with better thermal conductivity, the molecular reorganization is accelerated. Furthermore, fluorous solvent can be miscible with the residue of chloroform and chloronaphthalene above upper critical solution temperature. This mixed solvent diffuses around inside the active layer and selectively promotes molecular reorganization, leading to optimized morphology. Compared to widely-used thermal annealing, this approach processed under mild conditions achieves superior photovoltaic performance, indicating the practicality and universality for morphological optimization in OSCs as well as other optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Bimolecular crystal instability and morphology of bulk heterojunction blends in organic and perovskite solar cells

The performance of polymer:fullerene bulk heterojunction (BHJ) solar cells is significantly influenced by the morphology of electron donor and acceptor blends under the premise that electronic structure is complimentary regarding donor and acceptor materials. There are many cases where intimate mixing of donor and acceptor perturbs the electronic structure, which fundamentally changes the transport and photovoltaic characteristics. In this work, we present the bimolecular crystal packing of polymers and fullerenes, and investigate the correlation between device performance and structural details. We find that bimolecular crystallization can reorganize polymer chain packing, leading to poor electron transport and device performance. The size compatibility and the passivation of entropy penalty led to cocrystallization instability, which was clearly seen by in situ GIWAXS data. PC 61 BM is found to intercalate into side chains of PQT by reorganizing both PQT and PC 61 BM, forming stable, highly ordered bimolecular crystals. The poor electron transport in bimolecular crystal domain could account for the poor device performance in both perovskite and organic solar cells. Bis-PC 61 BM, on the other hand, only forms loosely packed aggregates in solution, and then rapidly phase separated into large domains with an edge-on interfacial orientation and performed poorly in solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Charge generation mechanism tuned via film morphology in small molecule bulk-heterojunction photovoltaic materials

Small organic molecules have emerged as promising component materials for organic photovoltaic devices. Compared to most conjugated polymers for the same application, small molecules have unique morphologies that promote electronic processes relevant to organic solar cell (OSC) function that can be significantly different from those of conjugated polymeric materials. Here we investigate constituent loading-dependent effects on OSC morphology and function using the classical fullerene acceptor, PC 61 BM, in a heterojunction blend with the small molecule donor, NDT (thiophene-capped diketopyrrolopyrrole naphthodithiophene). The evolution of active layer morphology as well as exciton speciation and dynamics as a function of the PC 61 BM content are examined in combined structural studies using GIWAXS and spectroscopic studies using transient absorption spectroscopy. We observe evidence for three types of coexisting excitons and details of the interplay between them determines the yield of charge separated states that afford sustained device efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quantitative relationships between film morphology, charge carrier dynamics, and photovoltaic performance in bulk-heterojunction binary vs. ternary acceptor blends

Addressing pertinent and perplexing questions regarding why nonfullerene acceptors (NFAs) promote higher power conversion efficiencies (PCEs) than traditional fullerenes and how photoactive bulk heterojunction (BHJ) film morphology, charge photogeneration, and recombination dynamics dictate solar cell performance have stimulated many studies of polymer solar cells (PSCs), yet quantitative relationships remain limited. Better understanding in these areas offers the potential to advance materials design and device engineering, afford higher PCEs, and ultimate commercialization. Here we probe quantitative relationships between BHJ film morphology, charge carrier dynamics, and photovoltaic performance in model binary and ternary blend systems having a wide bandgap donor polymer, a fullerene, and a promising NFA. We show that optimal PC 71 BM incorporation in a PBDB-TF:ITIC-Th binary system matrix retains the original π-face-on orientation, ITIC-Th crystallinity and BHJ film crystallite dimensions, and reduces film upper surface ITIC-Th segregation. Such morphology changes together simultaneously increase hole (μ h ) and electron (μ e ) mobilities, facilitate light-activated ITIC-Th to PC 71 BM domain electron delocalization, reduce free charge carrier (FC) bimolecular recombination (BR) within PBDB-TF:ITIC-Th mixed regions, and increase FC extraction pathways viaPBDB-TF:PC 71 BM pairs. The interplay of these effects yields significantly enhanced inverted cell short-circuit current density (J SC ), fill factor (FF), and PCE. Unexpectedly, we also find that excessive PC 71 BM in the PBDB-TF:ITIC-Th binary system alters the PBDB-TF orientation to π-edge-on, increases large scale PC 71 BM-rich aggregations and BHJ upper surface PC 71 BM composition. Further, these morphology changes increase parasitic decay processes such as intersystem crossing from photoexcited PC 71 BM, compromising the J SC , FF, and PCE metrics. ITIC-Th X-ray diffraction reveals a unique sidechain-dominated molecular network with previously unknown sidechain-end group stacking, rationalizing the STEM and GIWAXS results, photophysics, and the high μ e . DFT computation reveals charge transfer networks within ITIC-Th crystallites, supporting excited-state electron delocalization from ITIC-Th to PC 71 BM. This structure–property understanding leads to a newly reported NFA blend with PCE near 17%.

14 SOLAR ENERGY↗
DOE OSTI2023

Vertical van der Waals heterojunction diodes comprising 2D semiconductors on 3D β-Ga 2 O 3

Wide bandgap semiconductors such as gallium oxide (Ga 2 O 3 ) have attracted much attention for their use in next-generation high-power electronics. Although single-crystal Ga 2 O 3 substrates can be routinely grown from melt along various orientations, the influence of such orientations has been seldom reported. Further, making rectifying p–n diodes from Ga 2 O 3 has been difficult due to lack of p-type doping. In this study, we fabricated and optimized 2D/3D vertical diodes on β-Ga 2 O 3 by varying the following three factors: substrate planar orientation, choice of 2D material and metal contacts. Furthermore, the quality of our devices was validated using high-temperature dependent measurements, atomic-force microscopy (AFM) techniques and technology computer-aided design (TCAD) simulations. Our findings suggest that 2D/3D β-Ga 2 O 3 vertical heterojunctions are optimized by substrate planar orientation (–201), combined with 2D WS 2 exfoliated layers and Ti contacts, and show record rectification ratios (>10 6 ) concurrently with ON-Current density (>10 3 A cm –2 ) for application in power rectifiers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of ZnO and PEDOT:PSS charge selective layers on photovoltage of cuprous oxide (Cu 2 O) heterojunction solar cells

Electrochemical deposition (ECD) of Cu 2 O provides a scalable and low temperature pathway to solar cells with a theoretical high energy conversion efficiency of 23%, based on the 2.0–2.2 eV band gap of Cu 2 O. However, existing ECD-Cu 2 O devices are plagued by poor crystallinity and low selectivity of the electron and hole transport layers. Here we use Vibrating Kelvin Probe Surface Photovoltage Spectroscopy (VKP-SPV) to probe the charge transfer selectivity in FTO/ZnO/Cu 2 O/PEDOT:PSS/Ni heterojunction solar cells. Selective electron extraction is achieved at the ZnO back contact to Cu 2 O, as confirmed by a negative surface photovoltage signal. While the uncoated Cu 2 O surface is electron-selective due to the formation of a hole depletion layer, spin coating of a PEDOT:PSS film turns it into a hole-selective interface. After adding nickel metal ink top electrodes, functional 1.0 cm 2 solar cells with power conversion efficiency (PCE) of up to 0.07%, 195 mV open-circuit voltage, and 1.28 mA cm –2 short-circuit photocurrent are achieved. The photovoltaic performance is higher for aluminum doped zinc oxide (AZO) substrates than for fluorine doped tin oxide (FTO) due to the presence of a n-/p-junction that further increases the electron selectivity of the AZO/ZnO/Cu 2 O contacts. Overall, this work demonstrates the first application of PEDOT:PSS as a hole transport layer (HTL) for Cu 2 O and the use of VKP-SPV to measure the photovoltage contributions of the Cu 2 O interfaces. Furthermore, the ability to fabricate Cu 2 O solar cells at near room temperature without the use of vacuum methods or rare elements is an important step towards a scalable Cu 2 O PV technology.

14 SOLAR ENERGY↗
DOE OSTI2021

Optimization of four terminal rear heterojunction GaAs on Si interdigitated back contact tandem solar cells

High-efficiency, four-terminal tandem solar cells composed of thin GaAs films mechanically stacked onto interdigitated back contact silicon solar cells with a glass interlayer are demonstrated. The optimal thickness of the absorber layer of a rear heterojunction GaAs subcell for use in four terminal tandem solar cells was studied. GaAs top cells with absorber layer thicknesses of 1.5, 1.9, 2.3, 2.8, and 3.5 µm were fabricated on glass and mechanically stacked onto interdigitated back-contact Si bottom cells. All tandem cells were found to have efficiencies above 30% under the AM1.5 G spectrum demonstrating a relatively weak sensitivity to thickness in the four-terminal configuration. We found the 2.8 µm absorber layer cell to have the highest top cell and tandem cell efficiency at 26.38% and 32.57%, respectively. Optical modeling with transfer matrix method for the planar top cell and Lambertian light trapping in the textured Si subcell, along with drift-diffusion Hovel equations, were used to show photon recycling enhancement to the effective diffusion length and VOC of the top cell as a result of the low-index glass interlayer.

14 SOLAR ENERGY↗
DOE OSTI2021

Range-separated hybrid functionals for mixed dimensional heterojunctions: Application to phthalocyanines/MoS 2

We analyze the electronic structure and level alignment of transition-metal phthalocyanine (MPc) molecules adsorbed on two-dimensional MoS 2 employing density functional theory (DFT) calculations. We develop a procedure for multi-objective optimal tuning of parameters of range-separated hybrid functionals in these mixed-dimensional systems. Using this procedure, which leads to the asymptotically-correct exchange-correlation potential between molecule and two-dimensional material, we obtain electronic structures consistent with experimental photoemission results for both energy level alignment and electronic bandgaps, representing a significant advance compared to standard DFT methods. We elucidate the MoS 2 valence resonance with the transition-metal phthalocyanine non-frontier 3d orbitals and its dependence on the transition metal atomic number. Based on our calculations, we derive parameter-free, model self-energy corrections that quantitatively accounts for the effects of the heterogeneous dielectric environment on the electronic structure of these mixed-dimensional heterojunctions.

2D materials↗
DOE OSTI2022

Transport properties of polarization-induced 2D electron gases in epitaxial AlScN/GaN heterojunctions

AlScN is attractive as a lattice-matched epitaxial barrier layer for incorporation in GaN high electron mobility transistors due to its large dielectric constant and polarization. The transport properties of polarization-induced two-dimensional (2D) electron gas of densities of ∼2×10 13 /cm 2 formed at the AlScN–GaN interface is studied by Hall-effect measurements down to cryogenic temperatures. The 2D electron gas densities exhibit mobilities limited to ∼300 cm 2 /V s down to 10 K at AlScN/GaN heterojunctions. The insertion of a ∼2 nm AlN interlayer boosts the room temperature mobility by more than five times from ∼300 cm 2 /V s to ∼1573 cm 2 /V s, and the 10 K mobility by more than 20 times to ∼6980 cm 2 /V s at 10 K. These measurements provide guidelines to the limits of electron conductivities of these highly polar heterostructures.

42 ENGINEERING↗
DOE OSTI2021

Realization of semiconducting layered multiferroic heterojunctions via asymmetrical magnetoelectric coupling

Two-dimensional (2D) semiconducting multiferroics that can effectively couple magnetic and polarization (P) orders have great interest for both fundamental research and technological applications in nanoscale, which are, however, rare in nature. In this work, we propose a general mechanism to realize semiconducting 2D multiferroics via van der Waals (vdW) heterojunction engineering, as demonstrated in a typical heterostructure consisting of magnetic bilayer CrI 3 (bi-CrI 3 ) and ferroelectric monolayer In 2 Se 3 . Interestingly, the novel indirect orbital coupling between Se 4p and Cr 3d orbitals, intermediated by the interfacial I 5p orbitals, is switchable in the opposite P configurations, resulting in an unexpected mechanism of strong asymmetrical magnetoelectric coupling. Therefore, along with the noticeable ferroelectric energy barrier induced by In 2 Se 3 , the realization of opposite magnetic orders in opposite P configurations can eventually result in the novel multiferroicity in bi– CrI 3 /In 2 Se 3 . Finally, we demonstrate that our mechanism can generally be applied to design other vdW multiferroics even with tunable layer thickness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Highly Tunable Valley Polarization of Potential-Trapped Moiré Excitons in WSe 2 /WS 2 Heterojunctions

Moiré superlattices created by stacking atomic layers of transition metal dichalcogenide semiconductors have emerged as a class of fascinating artificial photonic and electronic materials. An appealing attribute of these structures is the inheritance of the valley degree of freedom from the constituent monolayers. Recent studies show evidence that the valley polarization of the moiré excitons is highly tunable. In heterojunctions of WSe 2 /WS 2 , marked improvement in valley polarization is observed by increasing optical excitation power, a behavior that is quite distinct from the monolayers, and lacks a clear understanding so far. Here, in this Letter, we show that this highly tunable valley property arises from filling of the moiré superlattice, which provides an intriguing mechanism for engineering these quantum opto-valleytronic platforms. Our data further demonstrate that the long-range electron-hole exchange interaction, despite being significantly weakened in the junctions, is the dominant source of moiré exciton intervalley scattering at low population. Using magnetic field tuning, we quantitatively determine the exchange interaction strength to be 0.03 and 0.24 meV for 0° and 60° twisted samples, respectively, in our experiments, about 1 order of magnitude weaker than that in the monolayers.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Probing the electronic properties of gap states near the surface of n -SrTiO 3-δ / i -Si (001) heterojunctions with high sensitivity

We have measured soft x-ray resonant photoemission for the n–SrTiO 3–δ /i–Si⁡(001) (δ=~0.0003) hybrid semiconductor heterojunction with the goal of probing occupied electronic states in the band gap near the surface. By utilizing both swept energy, angle-integrated and fixed-energy, and angle-resolved spectroscopies, we identify the atomic and orbital character of the in-gap state as well as the different electronic phases that contribute to it. Specifically, we isolate the state associated with trapped charge on the n–SrTiO 3–δ surface that causes surface depletion from the localized gap state resulting from electron correlation effects in the complex oxide. Using an x-ray energy close to select dipole allowed TiL 3 → 3⁢d x-ray absorption resonances results in a 40-fold increase in sensitivity. Furthermore, this feature makes photoemission possible when probing electrons from dopants at concentrations as low as a few hundredths of a percent.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Damp Heat Induced Degradation of Silicon Heterojunction Solar Cells With Cu-Plated Contacts

Damp heat exposure is one of the most stringent environments for testing the durability of solar cells in packaged modules. Damp heat stresses and induces a variety of degradation modes in solar cells and modules: for example, moisture-induced corrosion of electrodes and interconnections, deterioration of polymeric materials, and/or thermally activated diffusion processes. To screen for these and other potential degradation modes, we subject one-cell modules containing silicon heterojunction (SHJ) solar cells with Cu-plated contacts to extended damp heat tests at 85 °C/85% relative humidity. SHJ cells were laminated with two common encapsulants: ethylene vinyl acetate (EVA) and polyolefin elastomer (POE), and two constructions: glass-backsheet and glass-glass. We observe degradation in all components of solar cell maximum power (PMP): current, voltage, and fill factor, and find evidence of increased carrier recombination and nonideal diode behavior with increasing stress. For glass-backsheet constructions, EVA samples generally degrade more than POE by a factor of approximately 1.5x PMP, and the different encapsulants produce different degradation patterns. Similar trends are observed in glass-glass modules, but to a lesser degree. In a different experiment, we observe a decrease in effective minority carrier lifetime of nonmetallized SHJ precursors measured after damp heat. This implies that some degradation unrelated to the contacts is to be expected and confirms the observation of increasing recombination.

14 SOLAR ENERGY↗
DOE OSTI2020

Electroluminescence Characterization of Recombination in Back Junction Silicon Heterojunction Test Structures: Role of the Inversion Layer

Electroluminescence (EL) characterization technique is used to quantify recombination properties in back junction silicon (Si) heterojunction (HJ) solar cell test structures with interdigitated back contact (IBC) emitters and metal contacts. These test structures are three terminal devices that allow the selective biasing and injection of minority carriers into spatially isolated emitter strips having different widths. This allows the study of minority carriers' current transport, flow, and recombination in these regions, which can, then, be applied to full IBC cells. EL is used to verify that emission is proportional to the minority carriers' concentration in the corresponding regions of the device, thus providing information relevant to minority carriers' collection when compared with laser beam induced current technique in considerably less time and with a higher spatial resolution. Current transport through the inversion layer that occurs due to the band bending at the n crystalline Si and p amorphous Si interface is discussed relying on the distance that minority carriers travel in different configurations and on their diffusion length. Laser defect spots (LDS) were, then, introduced in the emitter regions to analyze the spatial profile of minority carriers as they recombine at the LDS due to their high surface recombination velocity. Ideality factors in different configurations are spatially mapped from EL before and after introducing LDS and are used to show the effect of the inversion layer on the different recombination mechanisms. Current transport through the inversion layer is studied at different biasing conditions and correlated with current transport after LDS.

42 ENGINEERING↗