Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrodynamic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dust supply to close binary systems

Binary systems can be born surrounded by circumbinary discs. The gaseous disc around either of the two stellar companions can have its life extended by the supply of mass arriving from the circumbinary disc. The objective of this study is to investigate the gravitational interactions exerted by a compact and eccentric binary system on the circumbinary and circumprimary discs, and the resulting transport of gas and solids between the disc components. We assume that the gas in the system behaves as a fluid, and we model its evolution by means of high-resolution hydrodynamical simulations. Dust grains are modelled as Lagrangian particles that interact with the gas and the stars. Our models indicate that significant fluxes of gas and dust proceed from the circumbinary disc towards the circumprimary disc. For the applied system parameters, grains of certain sizes are segregated outside the tidal gap generated by the stars. Consequently, the size distribution of the transported dust is not continuous, but presents a gap in the millimetre size range. In close binaries, the lifetime of an isolated circumprimary disc is found to be short, ~10 5 years, because of its low mass. However, because of the influx of gas from beyond the tidal gap, the disc around the primary star can survive much longer, ~10 6 years, as long as gas accretion from the circumbinary disc continues. The supply of solids and the extended lifetime of a circumbinary disc also aids in the possible formation of giant planets. Compared to close binary systems without a circumbinary disc, we expect a higher frequency of singleplanet or multiple-planet systems. Additionally, a planetesimal or debris belt can form in the proximity of the truncation radius of the circumprimary disc and/or around the location of the exterior edge of the tidal gap.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Gas and dust dynamics in γ Cephei-type disks

Context. Giant planets are observed orbiting the primary stars of close binary systems. Such planets may have formed in compact circumprimary disks, which once surrounded these stars, under conditions much different than those encountered around single stars. Aims. In order to quantify the effects of the strong gravitational perturbations exerted on circumprimary disk material, the three-dimensional (3D) dynamics of gas and dust in orbit around the primary star of a compact and eccentric binary system was modeled by applying the stellar and orbital parameters of γ Cephei, a well-known system that can be representative of a class of close binaries. Methods. Circumprimary gas was approximated as an Eulerian viscous and compressible fluid and modeled by means of 3D hydrodynamical simulations, assuming locally isothermal conditions in the medium around the primary star. Dust grains were modeled as Lagrangean particles, subjected to gravity and aerodynamic drag forces. Models that include a giant planet were also considered. Results. Models indicate that spiral density waves excited around pericenter passage propagate toward the inner boundary of the disk, through at least a few pressure scale-heights from the mid-plane, inducing radial and vertical mixing in the gas. However, perturbations imparted to gas, both in terms of eccentricity and precession, are far weaker than previously estimated by two-dimensional (2D) simulations. Models predict small eccentricities, ≲0.03, and slow retrograde precession. The addition of a giant planet does not change the low eccentricity state of the disk. The parameters applied to the disk would lead to the formation of a massive planet, many times the mass of Jupiter, in agreement with some observations. Micron to mm-size dust grains are well coupled to the gas, resulting in similar dynamics and statistically similar distributions of orbital elements. The planet only affects the dust distributions locally. In agreement with outcomes of recent 2D models, the lifetime of an isolated circumprimary disk would be brief, ~10 5 years, because of its compact nature, requiring a long-term external supply of mass to allow for the in situ formation of a giant planet.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Robustness of pairwise kinematic Sunyaev–Zel’dovich effect to optical-cluster-selection bias

The pairwise kinematic Sunyaev–Zel’dovich (kSZ) effect measures both the pairwise motion between galaxy groups and clusters and the amount of gas within them, providing a tracer for cosmic growth. To interpret the cosmological information in the kSZ measurements, it is crucial to understand the optical-cluster-selection bias on the kSZ observables. Line-of-sight structures that contribute to both the optical observable (e.g., richness) and the cosmological signal can induce a correlation between these two quantities at a fixed cluster mass. The selection bias arising from this correlation is a key systematic effect for cosmological analyses. For cosmological observables such as cluster abundance and weak lensing, controlling this selection bias may help explain the tension between the DES-Y1 results and the Planck constraints. In order to test for a kSZ effect equivalent of such a bias, we adopted an alternative mock richness based on galaxy counts within cylindrical volumes along the line of sight. We applied the cylindrical count method to hydrodynamical simulations across a wide range of galaxy-selection criteria, assigning richness consistent with DES-Y1 to the mock clusters. When comparing optically selected clusters to mass-selected halos, we find no significant bias on pairwise kSZ signals, pairwise velocities, or optical depth within our uncertainty limits of approximately 16, 10, and 8%, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Mapping the Perseus galaxy cluster with XRISM: Gas kinematic features and their implications for turbulence

We present extended gas kinematic maps of the Perseus cluster based on a combination of five new XRISM/Resolve pointings observed in 2025 with four performance verification datasets from 2024, totaling a net exposure of 745 ks. To date, Perseus remains the only cluster that has been extensively mapped out to ≃0.7 r 2500 by XRISM/Resolve, while simultaneously offering sufficient spatial resolution to resolve gaseous substructures driven by mergers and active galactic nucleus (AGN) feedback. Our observations cover multiple radial directions and a broad range of dynamical scales, enabling us to characterize the kinematic properties of the intracluster medium up to a scale of ∼500 kpc. In the measurements, we detected high-velocity dispersions (≃300km s −1 ) in the eastern region of the cluster that are spatially coincident with the extended X-ray surface brightness excess and correspond to a nonthermal pressure fraction of ≃7 − 13%. The velocity field outside the AGN-dominant region can be effectively described by a single, large-scale kinematic driver based on the velocity structure function, which statistically favors an energy injection scale of at least a few hundred kpc. The estimated turbulent dissipation energy is comparable to the gravitational potential energy released by a recent merger, implying a significant role of turbulent cascade in the merger energy conversion. In the bulk velocity field, we observed a dipole-like pattern along the east-west direction with an amplitude of ≃ ± 200 − 300 km s −1 , indicating rotational motions induced by the recent merger event. This feature constrains the viewing direction to ≃30° −50° relative to the normal of the merger plane. Our hydrodynamic simulations suggest that Perseus has experienced at least two energetic mergers since redshift z ∼ 1, the most recent of which is associated with the radio galaxy IC310, in agreement with recent SRG/eROSITA findings. This study showcases exciting scientific opportunities for future missions with high-resolution spectroscopic capabilities (e.g., HUBS, LEM, and NewAthena).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Equilibrium expectations for non-Gaussian fluctuations near a QCD critical point

With the highly anticipated results from the Beam Energy Scan II program at RHIC being recently revealed, an understanding of particle-number fluctuations and their significance as a potential signature of a possible QCD critical point is crucial. Early works that embarked on this endeavor sought to estimate the fluctuations due to the presence of a critical point assuming they stay in equilibrium. From these results came the proposal to focus efforts on higher, non-Gaussian, moments of the event-by-event distributions, in particular of the number of protons. These non-Gaussian moments are especially sensitive to critical fluctuations, as their magnitudes are proportional to high powers of the critical correlation length. As the equation of state provides key input for hydrodynamical simulations of heavy-ion collisions, we estimate equilibrium fluctuations from the BEST equation of state (EoS) that includes critical features from the 3D Ising Model. In particular, the proton factorial cumulants and their dependence on non-universal mapping parameters is investigated within the BEST EoS. Furthermore, the correlation length, as a central quantity for the assessment of fluctuations in the vicinity of a critical point, is also calculated in a consistent manner with the scaling equation of state. An understanding of the equilibrium estimates of proton factorial cumulants will be useful for further comparison to estimates of out-of-equilibrium fluctuations in order to determine the magnitude of the observable fluctuations to be expected in heavyion collision experiments, in which the time spent near a critical point is short.

Karthein, Jamie M. [Massachusetts Institute of Tec↗
DOE OSTI2024

Characterizing the effects of drive asymmetries, component offsets, and joint gaps in double shell capsule implosions

This work provides a numerical study of how double shell capsule deformations caused by drive asymmetries and fabrication imperfections affect implosion symmetry and neutron yield. Hydrodynamics simulations are performed in two dimensions and focus on low-mode deformations that are caused by corresponding asymmetries in the Hohlraum drive, component offsets, and ablator joint gaps. By providing a parameter study of these features, our goal is to understand the dominant sources for inner shell deformation and yield degradation. The discussed capsules are composed of an aluminum ablator with a chromium inner shell. The latter encloses a carbon-deuterium foam ball that serves as fuel. We find that for clean capsules, even-numbered low-mode asymmetries in the drive are imprinted on the ablator and smoothly transferred to the inner shell during shell collision. The resulting deformation of the inner shell is more pronounced with larger fuel radius, while the yield is inversely proportional to the amplitude of the drive asymmetry and varies by factors ≤4 in comparison with clean simulations. Capsule component offsets in the vertical direction and ablator thickness nonuniformity result in p1-type deformations of the imploding inner shell. Finally, joint gaps have the largest effect in deforming the ablator and inner shell and degrading yield. While small gap widths (1 μm) result in prolate inner shells, larger gap widths (4 μm) cause an oblate deformation. More importantly, capsules with a small outer gap (1 μm) experience a dramatic drop in yield, typically <3% of a clean simulation.

Goodarzi, S. (ORCID:000000018556489X)↗
DOE OSTI2024

Three-dimensional reconstruction of laser-direct-drive inertial confinement fusion hot-spot plasma from x-ray diagnostics on the OMEGA laser facility (invited)

A deep-learning convolutional neural network (CNN) is used to infer, from x-ray images along multiple lines of sight, the low-mode shape of the hot-spot emission of deuterium–tritium (DT) laser-direct-drive cryogenic implosions on OMEGA. The motivation of this approach is to develop a physics-informed 3-D reconstruction technique that can be performed within minutes to facilitate the use of the results to inform changes to the initial target and laser conditions for the subsequent implosion. The CNN is trained on a 3D radiation-hydrodynamic simulation database to relate 2D x-ray images to 3D emissivity at stagnation. The CNN accounts for the lack of an absolute spatial reference and the different bands of photon energies in the x-ray images. While previous works studied the effect of mode-1 asymmetries on implosion performance using nuclear diagnostics, this work focuses on the effect of mode 2 inferred from x-ray diagnostics on implosion performance. A current analysis of 19 DT cryogenic implosions indicates there is an upper limit of ~20% reduction in the neutron yield caused by an ℓ = 2 amplitude for ℓ 2 /ℓ 0 ≤ 0.32. Here, these conclusions are supported by 2D simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A compact x-ray spectrometer for measurements of electron temperature distributions in inertial confinement fusion implosions at OMEGA

The Wedge Range Filter (WRF), commonly used for proton spectroscopy at the OMEGA Laser Facility and National Ignition Facility, is adapted to measure the x-ray continuum spectrum through transmission measurement using a continuous-gradient filter. Continuum x rays emitted from the hotspot of an implosion contain information about the plasma composition and electron temperature. The WRF data are leveraged to probe this distribution, specifically the electron temperature distribution. In this work, the data recorded with the WRF are forward modeled using a temperature distribution model folded with the WRF response function. An uncertainty analysis is conducted through a Bayesian regression algorithm using a Hamiltonian Monte Carlo sampler. This analysis enables the uncertainties in the instrument response to be folded into the uncertainty estimation of the electron temperature and absolute x-ray emission. Data analysis for a series of OMEGA implosions is presented and compared with radiation hydrodynamic simulations.

Lasers↗
DOE OSTI2024

Charged-particle transport in high energy density plasmas

This Special Topic Collection grew out of two gatherings of researchers active in the high energy density (HED) physics community: a mini-conference on charged-particle transport in HED plasma held during the 64th annual meeting of the American Physical Society's Division of Plasma Physics (Spokane, WA, November 2022) and a dedicated charged-particle transport coefficient code comparison workshop (Livermore, CA, July 2023). These gatherings provided opportunities for theoretical, computational, and experimental researchers to discuss the state of the field, including current capabilities and methods, needs of hydrodynamic simulations, and frontiers for future research. Finally, this special issue collects a total of 13 research and review articles on charged-particle transport in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

X-ray spectroscopy of multi-temperature plasmas using the differential emission measure formalism

We present a theoretical construct that nominally underlies spectroscopic data analysis of multi-temperature plasmas, known as the differential emission measure (DEM). From a data analytic perspective, the DEM formalism is used to derive temperature distributions from line spectra that are formed in the presence of temperature gradients and by time integrations of evolving plasmas. From a modeling perspective, DEMs are convenient intermediaries between radiation hydrodynamics simulations and spectroscopic measurements acquired in the laboratory. The DEM concept and its associated methodologies were originally developed by spectroscopists working with astrophysical data. We borrow from these earlier investigations. In this manuscript, intended primarily as a tutorial, we discuss the basic concepts, but also augment various aspects of the theory by the way of extension and example, including a detailed treatment of various weighting and averaging schemes, intended to mitigate ambiguities that often arise when reporting temperature information. We focus on high-temperature plasmas that are not in local thermodynamic equilibrium and the x-ray spectra that they produce, although the core ideas presented here are applicable to spectroscopy in other energy bands. A few examples involving the derivation and manipulation of model DEMs in simple geometries are provided.

Liedahl, Duane A. [Lawrence Livermore National Lab↗
DOE OSTI2025

Radiation drive designed to extend the pressure ranges measured in Gbar equation of state experiments at the National Ignition Facility

We present the design and demonstration of a Shock-Strengthening hohlraum radiation temperature drive in the Gbar experimental platform at the National Ignition Facility intended to increase the pressure range measured in a single experiment. Previously published experiments by Döppner et al. measured the equation of state in polystyrene from 25 to 60 Mbar. Recent experimental data of the Shock-Strengthening drive initially demonstrated a much larger pressure range from 15 to 110 Mbar using the same peak radiation temperature and experimental platform. The Shock-Strengthening drive starts with a low temperature foot that launches a weak shock into the sample and is followed by a continuous increase in radiation temperature to strengthen the leading shock. The additional strengthening increases the pressure within the sample beyond what is achievable by convergence alone. Design features of the Shock-Strengthening drive and accompanying radiation hydrodynamics simulations are used to illustrate the method by which the pressure range is increased from previous experiments. This method of modifying the radiation temperature drive can be used on the Gbar platform to significantly increase the range for equation of state data collected in a single experiment for many materials.

Physics - Plasma physics↗
DOE OSTI2025

Development and scaling of MeV x-ray radiography at NIF-ARC

We investigate the generation of MeV x-rays using the Advanced Radiography Capability laser system at the National Ignition Facility using 1, 10, and 38 ps pulse durations, with laser energies reaching up to 4 kJ and using compound parabolic concentrators. Hydrodynamic simulations using up-to-date measurements of the contrast of the ARC laser are conducted, allowing us to employ an electron scaling model that incorporates scale length and pulse duration, which aligns closely with the observed temperature distributions. Comparable x-ray sources, in terms of dose, are generated when using a 10 ps pulse duration with 2.4 kJ at ∼1.9 ± 0.4 × 10 18 W/cm 2 and when using a 38 ps pulse duration with 4 kJ at 9.9 ± 0.4 × 10 17 W/cm 2 , both achieving ∼16 rad in air at 1 m for x-ray energies > 0.5 MeV. Radiographs performed on the laser “line-of-sight” show significant improvements in image quality than radiographs performed at 65 degrees to the laser axis. We verify the radiography performance using Monte Carlo Simulations.

Physics - Plasma physics↗
DOE OSTI2026

Wetted-foam target stability for laser-direct-drive inertial confinement fusion

Using highly resolved three-dimensional radiation-hydrodynamic simulations, the effects of wetted-foam (WF) ablators in direct-drive inertial confinement fusion cryogenic implosions on the OMEGA laser were investigated. The performance of these implosions was compared with that of implosions using targets with solid-plastic ablators. Simulations considering WF ablators as a homogeneous material show no mitigation of the effects of laser imprint, where the absence of this mitigation can be attributed to the use of picket pulses. Heterogeneous random-structure WF ablators introduce large short-wavelength perturbations, which are seeded by WF inhomogeneities. These perturbations exceed the perturbations seeded by the imprint and cause an additional reduction in implosion performance when the average pore size in the WF exceeds ~0.2 μm. Foam-seeded perturbations are expected to be less damaging in more stable high-adiabat (⁠ ≳ 5⁠) implosions. Here, the perturbations introduced by the WF ablators can be substantially reduced by using a foam matrix with a layered structure instead of a random one. Further study of the effects of WFs in ignition designs of the MJ laser energy scale is required in the perspective of future inertial fusion energy mass production.

Igumenshchev, I. V. [University of Rochester, NY (↗
DOE OSTI2026

Robustness of inertial fusion energy relevant implosions to low-mode asymmetries

Inertial confinement fusion implosions for power production need to be robust. Degradation sources need to be understood and considered for an economic power plant. In this work, the impact of low-mode asymmetries on yield is studied using 2D radiation hydrodynamics simulations for inertial fusion energy relevant implosions. First, a high-gain indirectly driven capsule design is developed. This design is subsequently degraded with low-mode drive asymmetries. The results show that yield is constant with increasing amounts of asymmetry until a cliff is reached where the yield quickly drops below ignition. Robustness arises because the degraded hotspot still has enough time to get to ignition before capsule decompression. This robustness occurs even though the asymmetry couples less energy to the hotspot and causes decompression to occur sooner. The robustness is linked to the generalized Lawson parameter, χ⁠. The value of χ steadily decreases with increasing asymmetry. Once χ is close to one, the hotspot is no longer able to ignite before the capsule decompresses. A simple piston model is used to predict where the robustness cliff is for any design. The trade-off between yield and robustness is also demonstrated.

Physics - Plasma physics↗
DOE OSTI2026

Geometric optics model of Thomson scattering enhanced by parametric coupling

We formulate a theory of Thomson scattering (TS) from inhomogeneous plasmas using a ray-tracing approach. The scattered radiation is described within the eikonal approximation, including convective gain arising from scattering instabilities driven by the TS probe laser. In the limit of a weak probe and vanishing gain, the theory recovers the standard TS cross section and scattered power due to volumetric particle noise. The ray-tracing formalism is implemented in a TS fitting framework, enabling accurate analysis of inhomogeneous plasmas whose background profiles can be provided by large-scale hydrodynamic simulations or experimental diagnostics. Here, several examples of synthetic TS spectra are presented, and further extensions of the theory are discussed.

Carleton, D. E. [University of Alberta, Edmonton, ↗
DOE OSTI2026

The role of thermal conduction on the size scaling of laser direct-drive implosions

Ablation pressure is a key parameter controlling laser drive performance in direct-drive inertial confinement fusion implosions. In this work, we develop a theoretical framework to clarify the role of thermal conduction in determining how ablation pressure scales with laser intensity, wavelength, and target size. We focus on a steady-state, spherically expanding plasma produced when an over-dense pellet is irradiated by a high-intensity laser. Scaling laws for ablation pressure and the mass ablation rate are derived with respect to laser intensity, wavelength, and target size. As a result, the theoretical predictions are found to be in good agreement with one-dimensional hydrodynamics simulations in spherical geometry.

Ablation↗
DOE OSTI2024

Measurement of the small-scale 3D Lyman- α forest power spectrum

Small-scale correlations measured in the Lyman-α (Lyα) forest encode information about the intergalactic medium and the primordial matter power spectrum. In this article, we present and implement a simple method to measure the 3-dimensional power spectrum, P 3D , of the Lyα forest at wavenumbers k corresponding to small, ~ Mpc scales. In order to estimate P 3D from sparsely and unevenly distributed data samples, we rely on averaging 1-dimensional Fourier Transforms, as previously carried out to estimate the 1-dimensional power spectrum of the Lyα forest, P 1D . Further, this methodology exhibits a very low computational cost. We confirm the validity of this approach through its application to Nyx cosmological hydrodynamical simulations. Subsequently, we apply our method to the eBOSS DR16 Lyα forest sample, providing as a proof of principle, a first P 3D measurement averaged over two redshift bins z = 2.2 and z = 2.4. This work highlights the potential for forthcoming P 3D measurements, from upcoming large spectroscopic surveys, to untangle degeneracies in the cosmological interpretation of P 1D .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Galaxy cluster profiles: a Gaussian mixture model approach to halo miscentering

Measurements of the galaxy density and weak-lensing profiles of galaxy clusters typically rely on an assumed cluster center, which is taken to be the brightest cluster galaxy or other proxies for the true halo center defined as the minimum in the potential well. Departure of the assumed cluster center from the true halo center bias the resultant profile measurements, an effect known as miscentering bias. Currently, miscentering is typically modeled in stacked profiles of clusters with a two parameter model. We use an alternate approach in which the profiles of individual clusters are used with the corresponding likelihood computed using a Gaussian mixture model. We test the approach using halos and the corresponding subhalo profiles from the IllustrisTNG hydrodynamic simulations. We obtain significantly improved estimates of the miscentering parameters for both 3D and projected 2D profiles relevant for imaging surveys. We discuss applications to upcoming cosmological surveys. Our Python package for the Gaussian mixture model is publicly available at https://github.com/KyleMiller1/Halo-Miscentering-Mixture-Model.

Bayesian reasoning↗