Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A Bulk versus Nanoscale Hydrogen Storage Paradox Revealed by Material-System Co-Design

Metal hydrides are serious contenders for materials-based hydrogen storage to overcome constraints associated with compressed or liquefied H 2 . Their ultimate performance is usually evaluated using intrinsic material properties without considering a systems design perspective. An illustrative case with startling implications is (LiNH 2 +2LiH). Using models that simulate the storage system and associated fuel cell of a light-duty vehicle (LDV), the performance of the bulk hydrides is compared with a nanoscaled version in porous carbon (PC), (LiNH 2 +2LiH)@(6-nm PC). Using experimental material properties, the simulations show that (LiNH 2 +2LiH)@(6-nm PC) counterintuitively has higher usable gravimetric and volumetric capacities than the bulk counterpart on a system basis despite having lower capacities on a materials-only basis. Nanoscaling increases the thermal conductivity and lowers the desorption enthalpy, which consequently increases heat management efficiency. In a simulated drive cycle for fuel cell-powered LDV, the fuel cell is inoperable using bulk (LiNH 2 +2LiH) as the storage material but completes the drive cycle using the nanoscale material. Further, these results challenge the notion that nanoscaling incurs mass and volume penalties. Instead, the synergistic nanoporous host-hydride interaction can favorably modulate chemical and heat transfer properties. Moreover, a co-design approach considering application-specific tradeoffs is essential to accurately assess a material's potential for real-world hydrogen storage.

08 HYDROGEN↗

New potentials for conventional aircraft when powered by hydrogen-enriched gasoline

Hydrogen enrichment for aircraft piston engines is under study in a new NASA program. The objective of the program is to determine the feasibility of inflight injection of hydrogen in general aviation aircraft engines to reduce fuel consumption and to lower emission levels. A catalytic hydrogen generator will be incorporated as part of the air induction system of a Lycoming turbocharged engine and will generate hydrogen by breaking down small amounts of the aviation gasoline used in the normal propulsion system. This hydrogen will then be mixed with gasoline and compressed air from the turbocharger before entering the engine combustion chamber. The paper summarizes the results of a systems analysis study. Calculations assuming a Beech Duke aircraft indicate that fuel savings on the order of 20% are possible. An estimate of the potential for the utilization of hydrogen enrichment to control exhaust emissions indicates that it may be possible to meet the 1979 Federal emission standards.

Menard, W. A.↗

A Mid-Century Net-Zero Scenario for the State of Wyoming and its Economic Impacts

Clean hydrogen has the potential to help achieve 10% economy-wide emissions reductions by 2050 relative to 2005, promote energy security and resilience, and develop a new economy in the United States. In 2030, the hydrogen economy could create about 100,000 new jobs to build new capital projects and clean hydrogen infrastructure. The Wyoming Energy Authority recently announced the state’s energy strategy, which establishes a goal of net-zero emissions by 2050. Under all likely scenarios, achieving a mid-century net-zero target will pose challenges and create opportunities for Wyoming’s energy sector. If executed properly, the transition could favorably affect the state’s economy overall in the long term. This research program examines the economic impact of fossil energy production in Wyoming and provides various predictions for future energy mixes to achieve net-zero emissions. Preliminary work suggests that Wyoming-based hydrogen production could have significant economic benefits and job creation implications for Wyoming. This study further assesses Wyoming’s opportunities to create hydrogen-based industries, assess economic impacts, identify knowledge gaps and research needs, and create a Hydrogen Center of Excellence to accelerate commercialization and deployment. This project helped to understand Wyoming's areas of focus for research and development and identified its areas of strength and potential challenges in creating a hydrogen ecosystem. As a result of this study, we estimate that for blue hydrogen produced from coal and gas resources, the overall cost reduction will be driven mainly by the carbon-sequestration tax credit and the improvement in carbon capture. Mature technologies, like SMR and PSA, will make limited contributions. They have no or limited reductions from an additional capacity deployment in future costs. We also understand the importance of continued support from public and private sectors for Carbon Capture and Storage (CCS)-related research, development, and demonstration programs at federal and state levels. The successful and efficient production of blue hydrogen requires a unique blend of energy resources, geology, regulation, law, and infrastructure. Wyoming has the distinction of meeting all these demands. The team also estimates that the availability and command of water resources accessible for hydrogen production are crucial for developing new projects. Water treatment, use, and disposal after treatment will also make projects possible. Primarily, this is relevant for hydrogen made using renewable energy. Wyoming has one of the best wind resource capacity in the nation. Harnessing this resource is challenging due to limited transmission line availability. Hydrogen could become one of the solutions to the stranded resource problem, primarily if the water availability challenge is addressed. Using produced oil & gas water could help to solve the problem. A commonly cited barrier to the expansion of hydrogen markets is the cost associated with constructing new pipelines, which typically require large amounts of capital to develop. Wyoming already possesses much of the export infrastructure needed to connect Wyoming’s hydrogen production with major markets across the West Coast, Pacific Northwest, Midwest, and Front Range regions of the United States, where a large portion of Wyoming’s natural gas is already transported. In addition to transportation by pipeline, rail transportation of hydrogen has also proven feasible. Wyoming uses its extensive railway system to transport large amounts of coal to its export partners across the United States. By using cryogenic or compressed-gas cars, Wyoming has the potential to add hydrogen to its existing network of railroad energy exports. The same technology may also be applied to hydrogen transport via trucks traveling interstate highways. Wyoming’s workforce is ready to meet the demands of clean hydrogen development. Many of the skills and training needed for hydrogen production are the same skills already possessed by Wyoming’s oil & gas and coal workforce. Many government and industry leaders expect clean hydrogen and other low-carbon energy projects to generate significant job growth and to recruit many already-trained oil & gas and coal workers whose jobs may be displaced. As energy companies seek to penetrate the markets for Wyoming hydrogen production, there is a natural mutual benefit to Wyoming’s workers and companies seeking to launch projects with the assistance of a trained workforce. Wyoming’s university and community college system have adopted several programs to ensure that highly qualified engineers and other technically skilled employees continue to graduate with skills to support the development of hydrogen and other innovative energy projects moving forward. Throughout the project, stakeholder outreach and education took many forms, including meetings with several major companies in the industry, collaborating with local government organizations, educational organizations, and national laboratories, tribal outreach and engagement, the sponsoring of several hydrogen-focused projects in many departments throughout the University of Wyoming, and developing a collaboration with international universities. The products of these collaborations consist of working relationships with several companies in the industry, educational institutions, national labs, and local government, as well as strong connections with individuals who will play an essential role in the success of the Hydrogen Energy Research Center.

08 HYDROGEN↗

Parabolized Navier-Stokes algorithm for chemically reacting flows

A second-order parabolized Navier-Stokes algorithm based on the MacCormack (1969) explicit scheme is used to study three-dimensional chemically reacting flows with finite-rate chemistry. The method can treat the chemical source term implicitly, and it accounts for the multicomponent diffusion and convection of the chemical species. The method is demonstrated with the nonreacting case of a Mach-3 flow over a double-wedge compression corner and the case of streamwise hydrogen injection at sonic velocity in a Mach-2.44 vitiated air stream.

Kamath, H.↗

Hovering and Transition Flight Tests of a 1/5-Scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An experimental investigation has been made to determine the dynamic stability and control characteristics of a 1/5-scale flying model of a jet-powered vertical-attitude VTOL research airplane in hovering and transition flight. The model was powered with either a hydrogen peroxide rocket motor or a compressed-air jet exhausting through an ejector tube to simulate the turbojet engine of the airplane. The gyroscopic effects of the engine were simulated by a flywheel driven by compressed-air jets. In hovering flight the model was controlled by jet-reaction controls which consisted of a swiveling nozzle on the main jet and a movable nozzle on each wing tip; and in forward flight the model was controlled by elevons and a rudder. If the gyroscopic effects of the jet engine were not represented, the model could be flown satisfactorily in hovering flight without any automatic stabilization devices. When the gyroscopic effects of the jet engine were represented, however, the model could not be controlled without the aid of artificial stabilizing devices because of the gyroscopic coupling of the yawing and pitching motions. The use of pitch and yaw dampers made these motions completely stable and the model could then be controlled very easily. In the transition flight tests, which were performed only with the automatic pitch and yaw dampers operating, it was found that the transition was very easy to perform either with or without the engine gyroscopic effects simulated, although the model had a tendency to fly in a rolled and sideslipped attitude at angles of attack between approximately 25 and 45 deg because of static directional instability in this range.

Smith, Charles C., Jr.↗

Hovering and Transition Flight Tests of a 1/5-Scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An experimental investigation has been made to determine the dynamic stability and control characteristics of a 1/5-scale flying model of a jet-powered vertical-attitude VTOL research airplane in hovering and transition flight. The model was powered with either a hydrogen peroxide rocket motor or a compressed-air jet exhausting through an ejector tube to simulate the turbojet engine of the airplane. The gyroscopic effects of the engine were simulated by a flywheel driven by compressed-air jets. In hovering flight the model was controlled by jet-reaction controls which consisted of a swiveling nozzle on the main jet and a movable nozzle on each wing tip; and in forward flight the model was controlled by elevons and a rudder. If the gyroscopic effects of the jet engine were not represented, the model could be flown satisfactorily in hovering flight without any automatic stabilization devices. When the gyroscopic effects of the jet engine were represented, however, the model could not be controlled without the aid of artificial stabilizing devices because of the gyroscopic coupling of the yawing and pitching motions. The use of pitch and yaw dampers made these motions completely stable and the model could then be controlled very easily. In the transition flight tests, which were performed only with the automatic pitch and yaw dampers operating, it was found that the transition was very easy to perform either with or without the engine gyroscopic effects simulated, although the model had a tendency to fly in a rolled and sideslipped attitude at angles of attack between approximately 25 deg and 45 deg because of static directional instability in this range.

Smith, Charles C., Jr.↗

Response Surface Modeling of Combined-Cycle Propulsion Components using Computational Fluid Dynamics

Three examples of response surface modeling with CFD are presented for combined cycle propulsion components. The examples include a mixed-compression-inlet during hypersonic flight, a hydrogen-fueled scramjet combustor during hypersonic flight, and a ducted-rocket nozzle during all-rocket flight. Three different experimental strategies were examined, including full factorial, fractionated central-composite, and D-optimal with embedded Plackett-Burman designs. The response variables have been confined to integral data extracted from multidimensional CFD results. Careful attention to uncertainty assessment and modeling bias has been addressed. The importance of automating experimental setup and effectively communicating statistical results are emphasized.

Steffen, C. J., Jr.↗

Synthetic and Biomass Alternate Fueling in Aviation

Must use earth's most abundant natural resources - Biomass, Solar, Arid land (43%), Seawater (97%) with nutrients (80%) plus brackish waters and nutrients resolve environmental triangle of conflicts energy-food-freshwater and ultrafine particulate hazards. Requires Paradigm Shift - Develop and Use Solar* for energy; Biomass for aviation and hybrid-electric-compressed air mobility fueling with transition to hydrogen long term.

Hendricks, Robert C.↗

OH PLIF Visualization of the UVa Supersonic Combustion Experiment: Configuration A

Hydroxyl radical (OH) planar laser-induced fluorescence (PLIF) measurements were performed in the University of Virginia s dual-mode scramjet experiment. The test section was set up in configuration A, which includes a Mach 2 nozzle, combustor, and extender section. Hydrogen fuel was injected through an unswept compression ramp at two different equivalence ratios. Through the translation of the optical system and the use of two separate camera views, the entire optical range of the combustor was accessed. Single-shot, average, and standard deviation images of the OH PLIF signal are presented at several streamwise locations. The results show the development of a highly turbulent flame structure and provide an experimental database to be used for numerical model assessment.

Johansen, Craig T.↗

OH PLIF Visualization of the UVa Supersonic Combustion Experiment: Configuration A

Hydroxyl radical (OH) planar laser-induced fluorescence (PLIF) measurements were performed in the University of Virginia supersonic combustion experiment. The test section was set up in configuration A, which includes a Mach 2 nozzle, combustor, and extender section. Hydrogen fuel was injected through an unswept compression ramp at two different equivalence ratios. Through the translation of the optical system and the use of two separate camera views, the entire optically accessible range of the combustor was imaged. Single-shot, average, and standard deviation images of the OH PLIF signal are presented at several streamwise locations. The results show the development of a highly turbulent flame structure and provide an experimental database to be used for numerical model assessment.

Johansen, Craig T.↗

General Equation Set Solver for Compressible and Incompressible Turbomachinery Flows

Turbomachines for propulsion applications operate with many different working fluids and flow conditions. The flow may be incompressible, such as in the liquid hydrogen pump in a rocket engine, or supersonic, such as in the turbine which may drive the hydrogen pump. Separate codes have traditionally been used for incompressible and compressible flow solvers. The General Equation Set (GES) method can be used to solve both incompressible and compressible flows, and it is not restricted to perfect gases, as are many compressible-flow turbomachinery solvers. An unsteady GES turbomachinery flow solver has been developed and applied to both air and water flows through turbines. It has been shown to be an excellent alternative to maintaining two separate codes.

Sondak, Douglas L.↗

Computational study of generic hypersonic vehicle flow fields

The geometric data of the generic hypersonic vehicle configuration included body definitions and preliminary grids for the forebody (nose cone excluded), midsection (propulsion system excluded), and afterbody sections. This data was to be augmented by the nose section geometry (blunt conical section mated with the noncircular cross section of the forebody initial plane) along with a grid and a detailed supersonic combustion ramjet (scramjet) geometry (inlet and combustor) which should be merged with the nozzle portion of the afterbody geometry. The solutions were to be obtained by using a Navier-Stokes (NS) code such as TUFF for the nose portion, a parabolized Navier-Stokes (PNS) solver such as the UPS and STUFF codes for the forebody, a NS solver with finite rate hydrogen-air chemistry capability such as TUFF and SPARK for the scramjet and a suitable solver (NS or PNS) for the afterbody and external nozzle flows. The numerical simulation of the hypersonic propulsion system for the generic hypersonic vehicle is the major focus of this entire work. Supersonic combustion ramjet is such a propulsion system, hence the main thrust of the present task has been to establish a solution procedure for the scramjet flow. The scramjet flow is compressible, turbulent, and reacting. The fuel used is hydrogen and the combustion process proceeds at a finite rate. As a result, the solution procedure must be capable of addressing such flows.

Narayan, Johnny R.↗

Laboratory evaluation of cyclic underground hydrogen storage in the Temblor sandstone of the San Joaquin Basin, California

Underground Hydrogen Storage (UHS) in depleted oil and gas reservoirs could provide a cost-effective solution to balance seasonal fluctuations in renewable energy generation. However, data and knowledge on UHS at subsurface conditions are limited so it is difficult to estimate how effective this type of storage could be. In this study, we perform high pressure experiment to measure the effectiveness of cyclic hydrogen (H 2 ) storage in a specimen of Temblor sandstone retrieved from the San Joaquin Basin of California. Our experiment mimics reservoir pressure conditions to measure H 2 -brine relative permeability and fluid-rock interactions over the course of ten charging and discharging cycles. Initial gas breakthrough occurred at 15 % to 25 % H2 saturation in the specimen with 3 % NaCl brine as the resident fluid. Continuing injecting to 4 pore volumes (PV) of H 2 yielded an asymptotic H 2 saturation of 38 % to 41 %, a level often referred to as the irreducible gas saturation based on two-phase flow. The boundary condition in this study mimics the near wellbore region, which experiences bi-directional H 2 flow. This bi-directional flow led to evaporative drying of the specimen resulting in 94 % H 2 saturation at the end of 10th cycle. This indicates that cyclic flow and evaporative drying can lead to more efficient reservoir storage where a larger fraction of the reservoir porosity is usable to store H 2 . The produced gas stream consisted of H 2 mixed with 8 % to 22 % H 2 O, indicating formation dry-out by evaporation. Meanwhile, produced water chemistry indicated calcite and silicate dissolution, with calcite sourced from fossil fragments. This led to a loss of cementation and weakened the rock sample. Combined, our results indicate dry-out, compaction, increased H 2 saturation, rock weakening, and permeability loss during cyclic UHS. Overall, we anticipate that the combined effects should lead to higher than anticipated UHS storage efficiency per volume of sandstone reservoir rock.

08 HYDROGEN↗

Investigation of radiative interactions in chemically reacting supersonic internal flows

Analyses and numerical procedures are presented to investigate the radiative interactions of absorbing-emitting species in chemically reacting supersonic flow in various ducts. Specific attention is directed in investigating the radiative contributions of H2O, OH, and NO under realistic physical and flow conditions. The radiative interactions in reacting flows are investigated by considering the supersonic flow of premixed hydrogen and air in a channel with a compression corner at the lower boundary. The results indicate that radiation can have significant influence on the flowfield and species production depending on the chemistry model employed.

Tiwari, S. N.↗

Interaction of the Local Interstellar Medium with the Heliosphere: Role of the Interior and Exterior Magnetic Fields

A complete model of the global interaction between the solar wind and the local interstellar medium must take account of interstellar neutral atoms, interstellar ionized gas, solar and galactic magnetic fields, galactic and anomalous cosmic rays. For now, however, in view of the many uncertainties about conditions in the interstellar medium, etc., all models must be regarded as highly idealized and incomplete. In the present review I concentrate on the role of magnetic fields of solar and interstellar origin. The former, the interior field, has negligible influence on the unshocked solar wind; the immediate post-shock solar wind is probably low-beta, so that the interior magnetic field is still unimportant, but this situation changes as the plasma flows through the heliosheath, and a ridge of strong magnetic field may form to separate materials of polar and equatorial origin. The exterior (interstellar) field is likely to play an important role in determining the global morphology of the system outside the termination shock. If the exterior field is strong enough, it can compress the heliosphere (although exterior neutral and/or ionized hydrogen may play the dominant role). Even if the interstellar magnetic field does not provide the dominant pressure, its orientation can substantially affect the configuration of the heliosphere, especially the location and orientation of the heliospheric discontinuities. The configurations can be quite different for the situations in which the field and flow are (a) aligned or (b) transverse. Obliquity of the field produces asymmetry in the geometry of the system; in particular the noses of heliopause and interstellar bow shock are shifted away from the interstellar flow direction, and in opposite directions, due to the asymmetric draping of the magnetic field.

Barnes, Aaron↗

Laboratory for Laser Energetics Targets Inertial Confinement Fusion

The University of Rochester’s Laboratory for Laser Energetics is targeting laser-driven inertial confinement fusion, as part of National Nuclear Security Administration’s Stockpile Stewardship Program and in the quest for clean sources of energy. The Laboratory for Laser Energetics (LLE) is home to two extremely powerful lasers—OMEGA and OMEGA EP—and researchers are using them to explore laser-driven inertial confinement fusion (ICF). ICF involves compressing a small amount of fuel consisting of hydrogen isotopes, deuterium (D), and tritium (T), and heating it to temperatures greater than the center of stars. “When these conditions are reached, the fuel undergoes fusion—releasing enormous energy that can be used for research relevant to the National Nuclear Security Administration’s (NNSA) Stockpile Stewardship Program (SSP) and to drive carbon-free power plants,” explains Valeri Goncharov, distinguished scientist and director of the Theory Division at LLE. LLE was established at the University of Rochester in 1970 and is the largest U.S. Department of Energy university-based research program in the nation, supported by the National Nuclear Security Administration as part of its Stockpile Stewardship Program (SSP). “As a center for exploring the interaction of intense radiation with matter, LLE is a unique national resource for research and education in science and technology,” says Goncharov. “Our current research includes exploring fusion for the SSP program and as a future source of energy, developing new laser and materials technologies, and pursuing a better understanding of high-energy-density phenomena.”

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Effects of Shockwave Pressures on Ultrafast Vibrational Energy Transfer in BNFF, a Hydrogen-Free Energetic Material

Energy conversion in energetic materials from shock-wave-induced lattice compression to bond breaking critically depends on vibrational coupling and energy transfer between intra- and intermolecular vibrations, though the details of the mechanisms remain unknown. Herein, we indirectly tune the strength of intermolecular interactions in 3,4-bis(3-nitrofurazan-4-yl)furoxan (BNFF), a hydrogen-free energetic material characterized by van der Waals interactions, by applying high static pressure using a diamond anvil cell and monitoring vibrational energy transfer (VET) with ultrafast broadband infrared pump–probe spectroscopy. As BNFF is compressed from ambient pressure to 9 GPa, we find that VET accelerates by ∼ 0.9 ps/GPa. Density functional theory is applied in tandem with experiments to assign mode character and elucidate VET pathways. In conclusion, we find that furazan ring O–N–O vibrations, which are high-frequency detonation-relevant vibrational modes, experience increased sensitivity to lattice compression under shockwave pressures. These findings provide new mechanistic insight into how intermolecular interactions govern the rate and selectivity of VET.

Energy transfer↗

Capture, storage, and re-use of liquid hydrogen boil-off for aviation and aerospace applications

Despite major interest in the use of liquid hydrogen as a fuel for aviation and aerospace sectors, loss of hydrogen through boil-off continues to be a hurdle as it causes financial loss, indirect greenhouse gas emissions, and safety concerns. Herein, we perform techno-economic analysis, calibrated with experimental measurements, to assess the use of sorbents to capture and condition hydrogen boil-off events in the range of 1.5 to 70 tonnes per day at launch sites and airports. We evaluate the direct delivery of captured boil-off to combustion engines and fuel cells, comparing against boil-off re-liquification and compression. Results indicate probable cost-effectiveness at delivered liquid hydrogen prices above 0.9 U.S. dollar ($) per kg H2 at airports, and above 10 $ per kg H2 at launch sites where 10% or more of hydrogen is lost to boil-off.

08 HYDROGEN↗