Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hydrogen Bonding Enhances the Electrochemical Hydrogenation of Benzaldehyde in the Aqueous Phase

Abstract The hydrogenation of benzaldehyde to benzyl alcohol on carbon‐supported metals in water, enabled by an external potential, is markedly promoted by polarization of the functional groups. The presence of polar co‐adsorbates, such as substituted phenols, enhances the hydrogenation rate of the aldehyde by two effects, that is, polarizing the carbonyl group and increasing the probability of forming a transition state for H addition. These two effects enable a hydrogenation route, in which phenol acts as a conduit for proton addition, with a higher rate than the direct proton transfer from hydronium ions. The fast hydrogenation enabled by the presence of phenol and applied potential overcompensates for the decrease in coverage of benzaldehyde caused by competitive adsorption. A higher acid strength of the co‐adsorbate increases the intensity of interactions and the rates of selective carbonyl reduction.

Sanyal, Udishnu↗
DOE OSTI2021

In situ friction and wear behavior of rubber materials incorporating various fillers and/or a plasticizer in high-pressure hydrogen

Polymers are used routinely for equipment and infrastructure in hydrogen vehicle refueling stations, but significant gaps remain in understanding their hydrogen compatibility. The tribological properties of these materials in a high-pressure hydrogen environment is important in preventing component failure and the need for frequent replacement. We present in situ tribological studies on model rubbers, which include common fillers and plasticizer, using an in situ tribometer developed previously. Results suggest a clear, yet complicated, combined effect of the high-pressure hydrogen and the additives on the tribological performance of the chosen materials, as compared to matching experiments performed in ambient air. We find that the additives improved wear resistance in EPDM but deteriorated that in NBR due to disparate additive-polymer interactions.

Kuang, Wenbin↗
DOE OSTI2022

Plasma-Catalyst Reactivity Control of Surface Nitrogen Species through Plasma-Temperature-Programmed Hydrogenation to Ammonia

Nonthermal plasma activation of N 2 can facilitate nitrogen adsorption on metal catalysts at low bulk temperatures and atmospheric pressure. Here, we apply a plasma-assisted temperature-programmed reaction (plasma-TPRxn) for ammonia (NH 3 ) synthesis using sequential exposure of a silica-supported metal catalyst to N 2 plasma followed by thermal hydrogen treatment while ramping the temperature to decouple the plasma activation of N 2 from surface catalyzed hydrogenation steps. This approach eliminates the effects from bulk plasma phase reactions, thereby allowing for direct interrogation of plasma activated nitrogen on the active metal surfaces. We confirm previously reported spectroscopic observations that show plasma-generated surface nitrogen can be converted to NH 3 through surface catalyzed pathways. Further, we demonstrate that the ammonia desorption peak temperature is sensitive to metal, with Pt desorbing NH 3 at the lowest temperature. Unsteady state microkinetic models of desorption kinetics as a function of initial N coverage and metal recover observed trends in NH 3 desorption temperatures and confirm that observed results reflect hydrogenation of plasma-induced N accommodation at each surface. In total, we show that the hydrogenation ability of the catalyst after plasma activation of N 2 is responsible for the reactivity trends observed in plasma-assisted NH 3 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Critical role of solvent-modulated hydrogen-binding strength in the catalytic hydrogenation of benzaldehyde on palladium

Protic and non-protic solvents influence the rate of benzaldehyde hydrogenation on Pd by one order of magnitude in the following sequence of increasing reactivity, dioxane < tetrahydrofuran < water < methanol. Despite these differences, the reaction pathway does not change; the majority of turnovers occurs via a Langmuir-Hinshelwood mechanism by stepwise addition of sorbed H to sorbed benzaldehyde, first to the carbonyl O and then to the C atom of the formyl group, forming benzyl alcohol. An analysis of the solvation energies shows that both ground and transition states are destabilized by the solvents compared to the same reaction at the gas-solid interface. The destabilization extent of the reacting organic substrates in both states are similar and, therefore, compensate each other, making the net kinetic effects inconsequential. In consequence, the marked reactivity differences arise solely from the differences in the surface stabilization of adsorbed hydrogen adatoms moderated by the four solvents-more weakly bound hydrogen adatoms, because of their solvation by solvent, exhibit higher rates of their hydrogenation reaction in kinetically relevant attack on the C atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determinants for proton location and electron coupled proton transfer in hydrogen bonded pentafluorophenol-anion clusters

This work aims to reveal the determinant factors for proton locations and electron coupled proton transfer (ECPT) in biologically relevant hydrogen bonded systems. Pentafluorophenol-anion clusters [C6F5O-•H+•A-]- are chosen to model active sites of biological functions, with the anion A- being systematically varied to ensure the proton affinities (PAs) of the anions well cover the referenced PA of C6F5O- from being appreciably smaller, similar, and to significantly larger. Negative ion photoelectron spectroscopy of these clusters provides spectroscopic evidence showing that proton location in the anionic state is largely following the PA prediction, while ECPT is observed only for the clusters with the anion possessing the electron binding energy (EBE) significantly larger than that of the referenced C6F5O-. Theoretical calculations suggest these clusters are stabilized by forming single strong hydrogen bond between donor and acceptor, and the associated charge and MO analyses fully support the experimental observations. The current holistic cluster model study indicates that PA is the right determinant that can be used to predict the proton location and describe hydrogen bonding structures, while both PA and EBE of anionic groups play important roles in facilitating ECPT process. This work was supported by U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Science, Geosciences, and Biosciences (X.-B.W.), and performed using EMSL, a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory, which is operated by Battelle Memorial Institute for the DOE. Part of this work was supported by the National Natural Science Foundation of China (No-11604046 for JZ; No. 11727810 for ZRS), as well as “Chenguang Program” by Shanghai Education Development Foundation, Shanghai Municipal Education Commission (No. 16CG38) and Natural Science Foundation of Shanghai (No. 16ZR1448100) (JZ).

Zhang, Jian↗
DOE OSTI2022

Negative hydrogen ion sources for particle accelerators: Sustainability issues and recent improvements in long-term operations

High brightness, negative hydrogen ion sources are used extensively in scientific facilities operating worldwide. Negative hydrogen beams have become the preferred means of filling circular accelerators and storage rings as well as enabling efficient extraction from cyclotrons. Several well-known facilities now have considerable experience with operating a variety of sources such as RF-, filament-, magnetron- and Penning-type H- ion sources. These facilities include the US Spallation Neutron Source (SNS), Japan Proton Accelerator Research Complex (J-PARC), Rutherford Appleton Laboratory (RAL-ISIS), Los Alamos Neutron Science Center (LANSCE), Fermi National Accelerator Laboratory (FNAL), Brookhaven National Laboratory (BNL), numerous installations of D-Pace (licenced by TRIUMF) ion sources used mainly on cyclotrons and, most recently, the CERN-LINAC-1 injector. This report first summarizes the current performance of these ion sources in routine, daily operations with attention toward source service-periods and availability metrics. Sustainability issues encountered at each facility are also reported and categorized to identify areas of common concern and key issues. Recent ion source improvements to address these issues are also discussed as well as plans for meeting future facility upgrade requirements.

Welton, Robert F.↗
DOE OSTI2021

Hydrogen Storage Tests Phase 2: Advanced Cryocompressed Hydrogen Delivery and Onboard Storage (CRADA No. TC02207 Final Report)

Thin-lined, high fiber fraction vessels have been designed, built and tested for producing cryogenic pressurized hydrogen storage with weight (9+% hydrogen weight fraction) and volume ( 50+ grams of hydrogen per liter of system volume) onboard storage performance. Long-term vessel durability was tested and partially demonstrated to 456 cycles. Other accomplishments included cycle testing a vessel provided by BMW 1000 times to demonstrate durability; and building and testing a facility for efficient testing of vessels and hydrogen components.

42 ENGINEERING↗
DOE OSTI2026

High-Capacity Hydrogen and Hydrogen Isotope Getters

Hydrogen can quietly build up inside sealed devices and industrial systems, shortening equipment life and creating safety risks. Los Alamos National Laboratory has developed a new class of high-capacity hydrogen getters that permanently remove hydrogen before it causes damage. Compared with conventional getters, this technology stores more hydrogen, operates across a wider range of conditions, and can be manufactured in multiple forms for easy integration into commercial products.

36 MATERIALS SCIENCE↗
NASA NTRS1970

The columbium-hydrogen system and hydrogen embrittlement of columbium

Columbium specimens are charged uniformly with hydrogen allowing accurate measurement of the hydrogen content by a procedure involving the removal of hydrogen from flowing argon at 2000 degrees F. Hydrogen content effects on the ductile-to-transition temperature are determined for temperatures between 200 and 600 degrees F.

Walter, R. J.↗
NASA NTRS1974

Analytical chemical kinetic investigation of the effects of oxygen, hydrogen, and hydroxyl radicals on hydrogen-air combustion

Quantitative values were computed which show the effects of the presence of small amounts of oxygen, hydrogen, and hydroxyl radicals on the finite-rate chemical kinetics of premixed hydrogen-air mixtures undergoing isobaric autoignition and combustion. The free radicals were considered to be initially present in hydrogen-air mixtures at equivalence ratios of 0.2, 0.6, 1.0, and 1.2. Initial mixture temperatures were 1100 K, 1200 K, and 1500 K, and pressures were 0.5, 1.0, 2.0, and 4.0 atm. Of the radicals investigated, atomic oxygen was found to be the most effective for reducing induction time, defined as the time to 5 percent of the total combustion temperature rise. The reaction time, the time between 5 percent and 95 percent of the temperature rise, is not decreased by the presence of free radicals in the initial hydrogen-air mixture. Fuel additives which yield free radicals might be used to effect a compact supersonic combustor design for efficient operation in an otherwise reaction-limited combustion regime.

Carson, G. T., Jr.↗
NASA NTRS1981

Influence of hydrogen chemisorption kinetics on the interpretation of hydrogen transport through iron membranes

The influence of a specific surface reaction on the transport of gas-phase hydrogen through iron membranes has been investigated on the basis of model calculations. The surface reaction involves an adsorbed molecular hydrogen precursor between the gas phase and the dissociated chemisorbed state. The calculations demonstrate that the surface reaction for the H2/Fe system makes significant contributions to the time delay associated with the transient hydrogen transport through iron membranes, even under conditions where the steady-state hydrogen transport is independent of the surface reaction. These contributions to the time delay are interpreted in terms of an effective diffusivity, which is a function of the pressure on the entrance side and the thickness of the membrane.

Shanabarger, M. R.↗
NASA NTRS1986

Characterization and optimization of hydrogen production by a salt water blue-green alga Oscillatoria sp. Miami BG 7. II - Use of immobilization for enhancement of hydrogen production

The technique of cellular immobilization was applied to the process of hydrogen photoproduction of nonheterocystous, filamentous marine blue-green alga, Oscillatoria sp. Miami BG 7. Immobilization with agar significantly improved the rate and longevity of hydrogen production, compared to free cell suspensions. Rates of H2 production in excess of 13 microliters H2 mg dry/wt h were observed and hydrogen production was sustained for three weeks. Immobilization also provided some stabilization to environmental variability and was adaptable to outdoor light conditions. In general, immobilization provides significant advantages for the production and maintenance of hydrogen photoproduction for this strain.

Phlips, E. J.↗
NASA NTRS1989

Iron-rich clay minerals on Mars - Potential sources or sinks for hydrogen and indicators of hydrogen loss over time

Although direct evidence is lacking, indirect evidence suggests that iron-rich clay minerals or poorly-ordered chemical equivalents are widespread on the Martian surface. Such clays can act as sources or sinks for hydrogen ('hydrogen sponges'). Ferrous clays can lose hydrogen and ferric clays gain it by the coupled substitution Fe(3+)O(Fe(2+)OH)-1, equivalent to minus atomic H. This 'oxy-clay' substitution involves only proton and electron migration through the crystal structure, and therefore occurs nondestructively and reversibly, at relatively low temperatures. The reversible, low-temperature nature of this reaction contrasts with the irreversible nature of destructive dehydroxylation (H2O loss) suffered by clays heated to high temperatures. In theory, metastable ferric oxy-clays formed by dehydrogenation of ferrous clays over geologic time could, if exposed to water vapor, extract the hydrogen from it, releasing oxygen.

Burt, D. M.↗
NASA NTRS2010

Empirical Method to Estimate Hydrogen Embrittlement of Metals as a Function of Hydrogen Gas Pressure at Constant Temperature

High pressure Hydrogen (H) gas has been known to have a deleterious effect on the mechanical properties of certain metals, particularly, the notched tensile strength, fracture toughness and ductility. The ratio of these properties in Hydrogen as compared to Helium or Air is called the Hydrogen Environment Embrittlement (HEE) Index, which is a useful method to classify the severity of H embrittlement and to aid in the material screening and selection for safety usage H gas environment. A comprehensive world-wide database compilation, in the past 50 years, has shown that the HEE index is mostly collected at two conveniently high H pressure points of 5 ksi and 10 ksi near room temperature. Since H embrittlement is directly related to pressure, the lack of HEE index at other pressure points has posed a technical problem for the designers to select appropriate materials at a specific H pressure for various applications in aerospace, alternate and renewable energy sectors for an emerging hydrogen economy. Based on the Power-Law mathematical relationship, an empirical method to accurately predict the HEE index, as a function of H pressure at constant temperature, is presented with a brief review on Sievert's law for gas-metal absorption.

Lee, Jonathan A.↗
DOE OSTI2022

Transfer hydrogenation of heavy hydrocarbons with hydrogen-donor solvents

Processes for treating highly viscous hydrocarbons, such as bitumen from oil sands or petroleum residues, with hydrogen-donor solvents are described. The hydrogen-donor solvent is prepared. A mixture of the hydrocarbon and the hydrogen-donor solvent is heated, and the product is cooled to produce a low viscosity and mildly upgraded hydrocarbon. The hydrogen-donor solvent can be modified to improve its solvent usefulness.

Chauhan, Satya P.↗
DOE OSTI2023

Atomic and ionic hydrogen flux probe for quantitative in-situ monitoring of hydrogen recycling

A new combination diagnostic as a hydrogen recycling monitor in harsh conditions is proposed. Combining permeation membrane probe with a Langmuir probe provides a possibility to measure both atomic and ionic hydrogen fluxes to plasma facing components. A brief overview of permeation probes is given. The range of measurable H fluxes is from 10 16 to more than 10 20 H m –2 s –1 . Time response of the permeation probe is ~ 0.1–0.5 s. A method to address disadvantages of permeation probes is proposed. This includes an introduction of a preparation chamber for Ar-plasma cleaning of the membrane and absolute calibration with a visible spectroscopy. The hydrogen recombination coefficient, evaluated in such calibration, is k u = 5.9 × 10 –30 m 4 s –1 , which agrees well with previous research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Hydrogen Spillover Is Regulating Minority Rh 1 Active Sites on TiO 2 in Room-Temperature Ethylene Hydrogenation

The complicated dynamics of active sites on single-atom catalysts under reducing conditions limits their applications in hydrogenation reactions and mechanistic understanding. Herein, we report that on Rh 1 /TiO 2 , *H spillover during room-temperature ethylene hydrogenation hydroxylates and reduces TiO 2 , enhancing the intrinsic activity of Rh 1 by 9-fold. Spectroscopic and kinetic evidence suggests that the spillover of *H is suppressed by their facile reaction with C 2 H 4 , most of the spilled *H are nonreactive spectators, and >99% turnovers occur on a small subset (<20%) of exposed “active Rh 1 ”. Steady-state kinetics indicates competitive adsorption between H and C 2 H 4 , H 2 dissociation is the rate-determining step, and the apparent activation barrier (E a,app ) of the reaction is ~48 kJ/mol. The evolution of Rh 1 under H 2 was further tracked by spectroscopic and microscopic techniques at elevated temperatures. At 200 °C, more Rh 1 are exposed, but these Rh 1 are at least 5-fold less active than that of the “active Rh 1 ”. At 300 °C, Rh clusters derived from Rh 1 become the main active sites, shifting E a,app to 62 kJ/mol, characteristic of Rh nanoparticles. At ≥400 °C, larger and more active Rh particles in the strong metal–support interaction state are created. In conclusion, this work revealed the unexpected regulation effects of *H spillover on M 1 active sites under ambient conditions, differentiated the minority active M 1 sites, and demonstrated how the stability of M 1 under reducing atmospheres affects hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗