Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit water model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A Mechanistic Model for Relative Permeability of Gas and Water Flow in Hydrate-Bearing Porous Media With Capillarity

Lack of mechanistic models to describe petrophysical properties of mobile phases in gas hydrate–bearing sediments is one of the key challenges in accurately predicting gas production. The major drawback of empirical models that are used to fit a relative permeability curve for mobile phases in gas hydrate–bearing sediments is that they are based on experimental data, which are limited, and not able to account for hydrate morphology in pore space. This study proposes a relative permeability model that is mechanistic in nature and developed to account capillarity by building on the original nonempirical relative permeability model that assumes negligible capillary pressure. The proposed model implicitly accounts for capillarity with the help of four empirical parameters (two for each mobile phase) that incorporate each mobile phase pressure. It is shown that the proposed model provides an improved match to relative permeability data (derived from pore–scale simulation of gas hydrate–bearing sediments) than nonempirical relative permeability by accounting for the effect of capillary pressure. Additionally, unlike fully empirical models that can predict relative permeabilities reliably only at gas hydrate saturations for which experimental data are available, the proposed model only requires fitting the empirical parameters once with experimental data at any single gas hydrate saturation and then it can then be used to predict relative permeability at any gas hydrate saturation. Here, the mechanistic nature of the proposed model allows studying relative permeability of hydrate–bearing sediments as a function of hydrate morphology and wettability (fluid phase distribution) besides other physical parameters of the model (e.g., porosity, gas, and water residual saturation). Based on the sensitivity analysis of different hydrate morphologies on gas/water relative permeability, it is found that gas relative permeability is sensitive to hydrate morphologies, while water relative permeability shows little dependency on hydrate localization in pore space.

58 GEOSCIENCES↗

Quantum Calculations on Plant Cell Wall Component Interactions

In this paper, density functional theory calculations were performed to assess the relative interaction energies of plant cell wall components: cellulose, xylan, lignin and pectin. Monomeric and tetramer linear molecules were allowed to interact in four different configurations for each pair of compounds. The M0 5 -2X exchange-correlation functional which implicitly accounts for short- and mid-range dispersion was compared against MP2 and RI-MP2 to assess the reliability of the former for modeling van der Waals forces between these PCW components. Solvation effects were examined by modeling the interactions in the gas phase, in explicit H 2 O, and in polarized continuum models (PCM) of solvation. PCMs were used to represent water, methanol, and chloroform. The results predict the relative ranges of each type of interaction and when specific configurations will be strongly preferred. Finally, structures and energies are useful as a basis for testing classical force fields and as guidance for coarse-grained models of PCWs.

59 BASIC BIOLOGICAL SCIENCES↗

The effect of concentration- and temperature-dependent dielectric constant on the activity coefficient of NaCl electrolyte solutions

Our implicit-solvent model for the estimation of the excess chemical potential (or, equivalently, the activity coefficient) of electrolytes is based on using a dielectric constant that depends on the thermodynamic state, namely, the temperature and concentration of the electrolyte, ε(c, T). As a consequence, the excess chemical potential is split into two terms corresponding to ion-ion (II) and ion-water (IW) interactions. The II term is obtained from computer simulation using the Primitive Model of electrolytes, while the IW term is estimated from the Born treatment. In our previous work [J. Vincze, M. Valiskó, and D. Boda, “The nonmonotonic concentration dependence of the mean activity coefficient of electrolytes is a result of a balance between solvation and ion-ion correlations,” J. Chem. Phys. 133, 154507 (2010)], we showed that the nonmonotonic concentration dependence of the activity coefficient can be reproduced qualitatively with this II+IW model without using any adjustable parameter. The Pauling radii were used in the calculation of the II term, while experimental solvation free energies were used in the calculation of the IW term. In this work, we analyze the effect of the parameters (dielectric constant, ionic radii, solvation free energy) on the concentration and temperature dependence of the mean activity coefficient of NaCl. We conclude that the II+IW model can explain the experimental behavior using a concentration-dependent dielectric constant and that we do not need the artificial concept of “solvated ionic radius” assumed by earlier studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio calculation of the deprotonation constants of an atomistically defined nanometer-sized, aluminium hydroxide oligomer

Aluminium possesses significant and diverse chemistry. Numerous compounds have been defined, and the elucidation of their chemistry is of significant geochemical interest. In this paper, a brucite-like, eight-aluminium aqueous cluster is modelled with density functional theory to identify its primary site of deprotonation and the associated pK(a) constant using both explicit (a full first solvent shell) and implicit solvent. Two methods for calculating the pK(a) are compared. We found that a bond density approach is better than a direct energy calculation for ions with large charge and high symmetry. The terminal aluminium atoms have equatorial ligated waters that in solvent have one long O-H bond. This site is more reactive than any of the other protons on the particle. Insights into the experimental crystal structure and Bader's Atoms in Molecules density analysis are presented as routes to reduce the computational time required for the identification of protonation sites.

AQUEOUS SOLVATION↗

Solutions for Reacting and Nonreacting Viscous Shock Layers with Multicomponent Diffusion and Mass Injection

Numerical solutions are presented for the viscous shocklayer equations where the chemistry is treated as being either frozen, equilibrium, or nonequilibrium. Also the effects of the diffusion model, surface catalyticity, and mass injection on surface transport and flow parameters are considered. The equilibrium calculations for air species using multicomponent: diffusion provide solutions previously unavailable. The viscous shock-layer equations are solved by using an implicit finite-difference scheme. The flow is treated as a mixture of inert and thermally perfect species. Also the flow is assumed to be in vibrational equilibrium. All calculations are for a 45 deg hyperboloid. The flight conditions are those for various altitudes and velocities in the earth's atmosphere. Data are presented showing the effects of the chemical models; diffusion models; surface catalyticity; and mass injection of air, water, and ablation products on heat transfer; skin friction; shock stand-off distance; wall pressure distribution; and tangential velocity, temperature, and species profiles.

Moss, J. N.↗

Mechanistic Insights into the Demethylation of Lignin‐Derived Structures Using Protic Ionic Liquids: A Density Functional Theory Study

Lignin valorization is restricted by the stability of its methoxy groups, creating a critical need for efficient demethylation strategies. Here, in this study, density functional theory (DFT) is employed to dissect the mechanistic pathways of demethylation in lignin model compounds, guaiacol and syringol, using protic ionic liquids (PILs) that act as both solvent and catalyst. Conductor‐like Screening Model for Real Solvents (COSMO‐RS) analysis identifies monoethanolammonium acetate ([MEOA][Ace]) as the most promising medium, attributed to its strong hydrogen bonding network and solvation ability. By integrating implicit and explicit solvation models, it is revealed that an acid‐catalyzed hydrolytic mechanism governs demethylation, with PILs stabilizing crucial transition states and intermediates. Complementary electronic structure evaluations, including highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gap analysis, charge distribution, and electrostatic potential mapping, demonstrate how PILs lower energetic barriers and enhance reactivity. To simulate realistic environments, this study is extended to lignin dimer complexes with varying water content, uncovering how water‐bridged solvation reverses demethylation preference from guaiacyl to syringyl units. This mechanistic shift aligns with experimental observations showing faster S‐unit reactivity in hydrated systems. Together, these findings provide atomic‐level insight into lignin demethylation dynamics and highlight how tuning acid concentration in PILs can accelerate kinetics, enabling a rational pathway toward next‐generation biomass conversion technologies.

COSMO-RS↗

Differences in fine particle chemical composition on clear and cloudy days

Clouds are prevalent and alter fine particulate matter (PM 2.5 ) mass and chemical composition. Cloud-affected satellite retrievals are subject to higher uncertainty and are often removed from data products, hindering quantitative estimates of tropospheric chemical composition during cloudy times. We examine surface PM 2.5 chemical constituent concentrations in the Interagency Monitoring of PROtected Visual Environments (IMPROVE) network in the United States during cloudy and clear-sky times defined using Moderate Resolution Imaging Spectroradiometer (MODIS) cloud flags from 2010 to 2014 with a focus on differences in particle species that affect hygroscopicity and aerosol liquid water (ALW). Cloudy and clear-sky periods exhibit significant differences in PM 2.5 mass and chemical composition that vary regionally and seasonally. In the eastern US, relative humidity alone cannot explain differences in ALW, suggesting that emissions and in situ chemistry related to anthropogenic sources exert determining impacts. An implicit clear-sky bias may hinder efforts to quantitatively understand and improve representation of aerosol–cloud interactions, which remain dominant uncertainties in models.

54 ENVIRONMENTAL SCIENCES↗

On the effect of using the Shapiro filter to smooth winds on a sphere

Spatial differencing schemes which are not enstrophy conserving nor implicitly damping require global filtering of short waves to eliminate the build-up of energy in the shortest wavelengths due to aliasing. Takacs and Balgovind (1983) have shown that filtering on a sphere with a latitude dependent damping function will cause spurious vorticity and divergence source terms to occur if care is not taken to ensure the irrotationality of the gradients of the stream function and velocity potential. Using a shallow water model with fourth-order energy-conserving spatial differencing, it is found that using a 16th-order Shapiro (1979) filter on the winds and heights to control nonlinear instability also creates spurious source terms when the winds are filtered in the meridional direction.

Takacs, L. L.↗

Time Acceleration Methods for Advection on the Cubed Sphere

Climate simulation will not grow to the ultrascale without new algorithms to overcome the scalability barriers blocking existing implementations. Until recently, climate simulations concentrated on the question of whether the climate is changing. The emphasis is now shifting to impact assessments, mitigation and adaptation strategies, and regional details. Such studies will require significant increases in spatial resolution and model complexity while maintaining adequate throughput. The barrier to progress is the resulting decrease in time step without increasing single-thread performance. In this paper we demonstrate how to overcome this time barrier for the first standard test defined for the shallow-water equations on a sphere. This paper explains how combining a multiwavelet discontinuous Galerkin method with exact linear part time-evolution schemes can overcome the time barrier for advection equations on a sphere. The discontinuous Galerkin method is a high-order method that is conservative, flexible, and scalable. The addition of multiwavelets to discontinuous Galerkin provides a hierarchical scale structure that can be exploited to improve computational efficiency in both the spatial and temporal dimensions. Exact linear part time-evolution schemes are explicit schemes that remain stable for implicit-size time steps.

54 ENVIRONMENTAL SCIENCES↗

Driving force and pathway in polyelectrolyte complex coacervation

There is notable discrepancy between experiments and coarse-grained model studies regarding the thermodynamic driving force in polyelectrolyte complex coacervation: experiments find the free energy change to be dominated by entropy, while simulations using coarse-grained models with implicit solvent usually report a large, even dominant energetic contribution in systems with weak to intermediate electrostatic strength. Here, using coarse-grained, implicit-solvent molecular dynamics simulation combined with thermodynamic analysis, we study the potential of mean force (PMF) in the two key stages on the coacervation pathway for symmetric polyelectrolyte mixtures: polycation–polyanion complexation and polyion pair–pair condensation. We show that the temperature dependence in the dielectric constant of water gives rise to a substantial entropic contribution in the electrostatic interaction. By accounting for this electrostatic entropy, which is due to solvent reorganization, we find that under common conditions (monovalent ions, room temperature) for aqueous systems, both stages are strongly entropy-driven with negligible or even unfavorable energetic contributions, consistent with experimental results. Furthermore, for weak to intermediate electrostatic strengths, this electrostatic entropy, rather than the counterion-release entropy, is the primary entropy contribution. From the calculated PMF, we find that the supernatant phase consists predominantly of polyion pairs with vanishingly small concentration of bare polyelectrolytes, and we provide an estimate of the spinodal of the supernatant phase. Finally, we show that prior to contact, two neutral polyion pairs weakly attract each other by mutually induced polarization, providing the initial driving force for the fusion of the pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimating T2 from surface NMR FID data using a forward model based on the full-Bloch equation

An integral component of the surface nuclear magnetic resonance forward model involves predicting the magnitude of the transverse magnetization following excitation. To predict the transverse magnetization, the Bloch equation must be solved. Traditional surface NMR forward models solve a simplified version of the Bloch equation where the relaxation terms are neglected. A shortcoming of this approach is that it can struggle to accurately describe the impact of relaxation during pulse effects. To address this concern, an alternative forward model based on solution of the full-Bloch equation is proposed. The advantage of the proposed scheme is that it implicitly accounts for relaxation during pulse effects, increases the flexibility to implement alternative parametrizations of the inverse model, and can readily describe an arbitrary excitation protocol given that it no longer requires closed form expressions of the transverse magnetizations. To demonstrate the potential of the updated forward modelling scheme, a novel approach for the inversion of complex-valued free-induction decay (FID) data is presented. The inverse model is reparametrized in order to produce depth profiles of the water content, T2* and T2. This approach has great potential to enhance the ability of FID measurements to provide insights into pore size and permeability as it can provide direct sensitivity to T2. In contrast, traditional approaches that employ a forward model based on the simplified Bloch equation and estimate only T2* are plagued by uncertainty surrounding the link between T2* and pore size/permeability. Synthetic and field results are presented to demonstrate the feasibility of the proposed forward model and FID inversion framework.

58 GEOSCIENCES↗

Explicit solvent machine-learned coarse-grained model of sodium polystyrene sulfonate to capture polymer structure and dynamics

In this article, strongly charged polyelectrolytes (PEs) demonstrate complex solution behavior as a function of chain length, concentrations, and ionic strength. The viscosity behavior is important to understand and is a core quantity for many applications, but aspects remain a challenge. Molecular dynamics simulations using implicit solvent coarse-grained (CG) models successfully reproduce structure, but are often inappropriate for calculating viscosities. To address the need for CG models which reproduce viscoelastic properties of one of the most studied PEs, sodium polystyrene sulfonate (NaPSS), we report our recent efforts in using Bayesian optimization to develop CG models of NaPSS which capture both polymer structure and dynamics in aqueous solutions with explicit solvent. We demonstrate that our explicit solvent CG NaPSS model with the ML-BOP water model [Chan et al. Nat Commun 10, 379 (2019)] quantitatively reproduces NaPSS chain statistics and solution structure. The new explicit solvent CG model is benchmarked against diffusivities from atomistic simulations and experimental specific viscosities for short chains. We also show that our Bayesian-optimized CG model is transferable to larger chain lengths across a range of concentrations. Overall, this work provides a machine-learned model to probe the structural, dynamic, and rheological properties of polyelectrolytes such as NaPSS and aids in the design of novel, strongly charged polymers with tunable structural and viscoelastic properties

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Learning Constitutive Relations From Soil Moisture Data via Physically Constrained Neural Networks

Abstract The constitutive relations of the Richardson‐Richards equation encode the macroscopic properties of soil water retention and conductivity. These soil hydraulic functions are commonly represented by models with a handful of parameters. The limited degrees of freedom of such soil hydraulic models constrain our ability to extract soil hydraulic properties from soil moisture data via inverse modeling. We present a new free‐form approach to learning the constitutive relations using physically constrained neural networks. We implemented the inverse modeling framework in a differentiable modeling framework, JAX, to ensure scalability and extensibility. For efficient gradient computations, we implemented implicit differentiation through a nonlinear solver for the Richardson‐Richards equation. We tested the framework against synthetic noisy data and demonstrated its robustness against varying magnitudes of noise and degrees of freedom of the neural networks. We applied the framework to soil moisture data from an upward infiltration experiment and demonstrated that the neural network‐based approach was better fitted to the experimental data than a parametric model and that the framework can learn the constitutive relations.

54 ENVIRONMENTAL SCIENCES↗

Determination of Top-of-Atmosphere Longwave Radiative Fluxes: A Comparison Between Two Approaches Using ScaRaB Data

Two conceptually different approaches (broadband-based ERBE and narrowband-based ISCCP approaches), used to derive the TOA longwave radiative fluxes, are compared using the ScaRaB simultaneous narrowband and broadband measurements. This study directly shows that the ERBE MLE-derived cloud covers implicitly contain some information on the cloud optical properties. A spurious view-zenith-angle dependence of the MLE scene identification scheme is confirmed by this study. Except for very thin cirrus clouds, differences between the ERBE and ISCCP approaches are in general < 10 W/sq m for the TOA LW radiative fluxes. For clear pixels, the model calculated (ISCCP approach) TOA LW radiances are systematically smaller than the observations. Though the bias is found to be correlated on the column precipitable water amount, the exact source of this discrepancy remains undetermined and merits further study. Compared with the radiative transfer model used in this study, the ERBE LW ADMs are too weakly limb-darkened for optically thin clouds, but too strongly limb-darkened for optically thick clouds, indicating that more accurate instantaneous TOA LW flux estimations from the ERBE approach would require additional cloud classes based on cloud height and optical thickness.

Chen, Ting↗

Solvation Thermodynamics of Solutes in Water and Ionic Liquids Using the Multiscale Solvation-Layer Interface Condition Continuum Model

We report molecular assembly processes are generally driven by thermodynamic properties in solutions. Atomistic modeling can be very helpful in designing and understanding complex systems, except that bulk solvent is very inefficient to treat explicitly as discrete molecules. The SLIC/CDC multiscale model combines continuum solvent electrostatics based on the solvent layer interface condition (SLIC) with statistical thermodynamic models for hydrogen bonding and nonpolar modes: cavity formation, dispersion interactions, combinatorial mixing (CDC). The SLIC/CDC model predicts Gibbs energies of solvation for a database of 500 solutes in water with average accuracy better than 1 kcal/mol both for experimental measurements and for explicit-solvent molecular dynamics simulations. The separate SLIC/CDC energy mode values agree quantitatively with those computed from explicit-solvent molecular dynamics. The SLIC/SASA multiscale model combines the SLIC continuum electrostatic model with the solvent accessible surface area (SASA) nonpolar energy mode. The SLIC/SASA model predicts Gibbs energies of solvation with better than 1.4 kcal/mol average accuracy in aqueous systems and better than 1.6 kcal/mol average accuracy in ionic liquids. Both models predict solvation entropies, and are the first implicit-solvation models capable of predicting solvation heat capacities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validated environmental and physiological data from the CELSS Breadboard Projects Biomass Production Chamber. BWT931 (Wheat cv. Yecora Rojo)

This KSC database is being made available to the scientific research community to facilitate the development of crop development models, to test monitoring and control strategies, and to identify environmental limitations in crop production systems. The KSC validated dataset consists of 17 parameters necessary to maintain bioregenerative life support functions: water purification, CO2 removal, O2 production, and biomass production. The data are available on disk as either a DATABASE SUBSET (one week of 5-minute data) or DATABASE SUMMARY (daily averages of parameters). Online access to the VALIDATED DATABASE will be made available to institutions with specific programmatic requirements. Availability and access to the KSC validated database are subject to approval and limitations implicit in KSC computer security policies.

Stutte, G. W.↗

Accurate Modeling of Bromide and Iodide Hydration with Data-Driven Many-Body Potentials

Ion–water interactions play a central role in determining the properties of aqueous systems in a wide range of environments. However, a quantitative understanding of how the hydration properties of ions evolve from small aqueous clusters to bulk solutions and interfaces remains elusive. Here, we introduce the second generation of data-driven many-body energy (MBnrg) potential energy functions (PEFs) representing bromide–water and iodide–water interactions. The MB-nrg PEFs use permutationally invariant polynomials to reproduce two-body and three-body energies calculated at the coupled cluster level of theory, and implicitly represent all higher-body energies using classical many-body polarization. Further, a systematic analysis of the hydration structure of small Br - (H 2 O) n and I - (H 2 O) n clusters demonstrates that the MBnrg PEFs predict interaction energies in quantitative agreement with “gold standard” coupled cluster reference values. Importantly, when used in molecular dynamics simulations carried out in the isothermal-isobaric ensemble for single bromide and iodide ions in liquid water, the MB-nrg PEFs predict extended X-ray absorption fine structure (EXAFS) spectra that accurately reproduce the experimental spectra, which thus allows for characterizing the hydration structure of the two ions with high level of confidence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extreme scale unstructured adaptive CFD for aerodynamic flow control

Understanding the flow of fluid, either liquid or gas, through and around solid bodies has challenged man since the dawn of scientific inquiry. Many of the great minds of science and mathematics have progressively built up a hierarchy of fluid models since fluid flow impacts our lives in so many fundamental ways - from the early days of flow of water in viaducts to cities, to today's flight of planes. This chapter is concerned with the computational modeling of turbulent flow around aerodynamic bodies such as planes and wind turbines. In this case, viscous effects near the solid bodies create very thin boundary layers that yield highly anisotropic (gradients normal to the surface may be 10 6 larger than gradients along the surface) solutions to the governing non-linear partial differential equations (PDE); the Navier-Stokes equations. Furthermore, turbulent flows develop extremely broad ranges of length and time scales motivating the use of discretization methods capable of employing adaptivity and implicit time integration. The combination of these features - non-linear, anisotropy, adaptivity, and implicit - dramatically raise the complexity of the discretization, posing large challenges to efficient scalable parallel implementation. However, through careful design, the more complex algorithms can provide great reductions in computational cost relative to simpler methods (e.g., Cartesian grids with explicit time integration) that are easier to mate efficiently to hardware. In this chapter, we not only describe our approach but we also address the fact that while complex algorithms may never be as efficient flop-for-flop as simple methods, in the important measure of science-per-core-hour, they can still win big by making complex features like adaptivity and implicit methods as efficient and scalable as possible.

42 ENGINEERING↗