Search NASA⌕ Search

SEARCH · Search NASA

Results for “index modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Reducing module soiling with scalable and robust photocatalytic coatings

The air-glass interface at the front of a photovoltaic (PV) module reflects approximately 4% of incident light, decreasing the potential power output of the module by the same amount. Today’s modules reduce this loss by adding a low-refractive-index (1.25-1.30) SiO2 coating to the sunward side of the module glass; this antireflection coating recovers approximately 3% of the 4% light that would otherwise be lost. While such antireflection coatings work very well on clean, new modules, they do not inhibit soiling—the accumulation of soilants such as dust, pollen, soot, or other foreign material—on the module glass, and soilants reflect and scatter incident light. An improved coating would serve provide not only an antireflection effect, but also an anti-soiling effect. The goal of this project was to develop such a coating and provide a path for it to be manufactured in the U.S. The project successfully designed and fabricated coatings that provided >3% transmittance gain compared to bare glass (matching the performance of commercial antireflection coatings) and displayed anti-soiling behavior in standard laboratory soiling effects. This was achieved by using a Swift Coat proprietary coating deposition technique, aerosol impact-driven assembly (AIDA), to control the porosity and thus refractive index of coatings of photocatalytic materials—such as TiO2—that would otherwise increase (instead of decrease) reflection. These combined antireflection/anti-soiling coatings passed PV industry standard module reliability tests as well as coating-specific abrasion tests, showing that they have the durability needed for decades in the field. Swift Coat scaled the AIDA hardware and deposition process to make mini-modules that were monitored for nearly two years during field tests administered by a third party, as well as demonstrated scaling to the widths of full-sized modules. The fielded mini-modules outperformed reference modules (with commercial antireflection coatings) in two locations, providing a 1% absolute average performance boost and larger increases during periods of heavier soiling. Swift Coat’s cost analysis indicated a coating manufacturing cost below the sales price of today’s antireflection coatings. More than five module manufacturers sampled and assessed the coatings, and three provided letters of support. The coating developed in this project increases the energy output of PV modules, thereby decreasing the cost per kilowatt-hour of solar energy generated. Cheaper solar electricity benefits the public by accelerating the transition to a stable, affordable, carbon-free energy economy. In addition, for select applications in which PV modules are highly visible—such as on residential rooftops—the coating provides an aesthetic benefit because it stays cleaner than today’s modules. Finally, Swift Coat and its prospective customers are U.S. companies, and successful commercialization of this technology will provide U.S. jobs and a secure solar supply chain.

14 SOLAR ENERGY↗
DOE OSTI2020

Disruption of a key ligand-H-bond network drives dissociative properties in vamorolone for Duchenne muscular dystrophy treatment

Duchenne muscular dystrophy is a genetic disorder that shows chronic and progressive damage to skeletal and cardiac muscle leading to premature death. Antiinflammatory corticosteroids targeting the glucocorticoid receptor (GR) are the current standard of care but drive adverse side effects such as deleterious bone loss. Through subtle modification to a steroidal backbone, a recently developed drug, vamorolone, appears to preserve beneficial efficacy but with significantly reduced side effects. We use combined structural, biophysical, and biochemical approaches to show that loss of a receptor-ligand hydrogen bond drives these remarkable therapeutic effects. Moreover, vamorolone uniformly weakens coactivator associations but not corepressor associations, implicating partial agonism as the main driver of its dissociative properties. Additionally, we identify a critical and evolutionarily conserved intramolecular network connecting the ligand to the coregulator binding surface. Interruption of this allosteric network by vamorolone selectively reduces GR-driven transactivation while leaving transrepression intact. Our results establish a mechanistic understanding of how vamorolone reduces side effects, guiding the future design of partial agonists as selective GR modulators with an improved therapeutic index.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2019

Downscaling and Validation of SMAP Radiometer Soil Moisture in CONUS

The SMAP (Soil Moisture Active/Passive) satellite provides global soil moisture (SM) estimates that can be used for scientific research and applications (such as the hydrological cycle, agriculture, ecology, and land atmosphere interactions). Currently, SMAP provides the enhanced radiometer-only SM product (L2SMP) at 9 km grid resolution. However, this spatial resolution is still not enough to satisfy the needs of some studies that require a finer spatial resolution SM product, particularly in agricultural and watershed applications. This study applied a downscaling algorithm to the SMAP 9 km SM product to produce a 1 km resolution over the CONUS (Contiguous United States). The downscaling algorithm is based on the relationship between temperature change and SM modulated by Normalized Difference Vegetation Index (NDVI) of a given time period. This relationship was modeled using variables derived from NLDAS (North America Land Data Assimilation System) and NASA's LTDR (Land Long Term Data Record) between 1981-2018. The algorithm was implemented uses the 1 km MODIS Aqua LST (Land Surface Temperature) product. The downscaled SMAP 1 km SM was validated using in situ SM measurements from the ISMN (International Soil Moisture Network). The validation metrics show an improved overall accuracy of the downscaled SM.

downscaling↗
NASA NTRS2026

LAI Assimilation Schedules to Constrain Uncertain Cultivars and Soils in CERES-Maize

In anticipation of large-domain crop model applications where precise local configuration and calibration is not possible, we describe benefits and potential drawbacks of employing a crop pest module to achieve leaf area index (LAI) assimilation into a high performing CERES-Maize crop model configuration at a field experiment site in Perry, Iowa. Simulation experiments explore the use of MODIS satellite-derived LAI to constrain and adjust LAI to counter imprecise cultivar and soil configurations often occurring in the absence of high-quality local information. Simulations using single-day, window, and continuous LAI replacement across 5 cultivars and 2 soil calibration approaches for nine corn rotation years from 2004 to 2020 led to different yield outcomes and reverberations throughout the field environment. Evaluating variance and mean bias, results indicate minimal interventions in early vegetative and grain-filling stages were more beneficial than use of continuous LAI adjustments, as they minimized disruptions to the internal resource balances governing plant stresses and grain production. LAI adjustment was particularly helpful in constraining growth related to uncertain thermal unit requirements and leaf tip appearance rates (P1 and PHINT cultivar parameters, respectively). Findings underscore the need to assimilate additional state variables to ensure internal biophysical coherence. This approach shows promise for applications spanning wider domains with prediction time pressure where detailed configuration, more complex assimilation methods, or recalibration of crop model parameters may not be practical.

Phenology↗
NASA NTRS2004

Methods and apparatus for constructing and implementing a universal extension module for processing objects in a database

Methods and apparatus for providing a multi-tier object-relational database architecture are disclosed. In one illustrative embodiment of the present invention, a multi-tier database architecture comprises an object-relational database engine as a top tier, one or more domain-specific extension modules as a bottom tier, and one or more universal extension modules as a middle tier. The individual extension modules of the bottom tier operationally connect with the one or more universal extension modules which, themselves, operationally connect with the database engine. The domain-specific extension modules preferably provide such functions as search, index, and retrieval services of images, video, audio, time series, web pages, text, XML, spatial data, etc. The domain-specific extension modules may include one or more IBM DB2 extenders, Oracle data cartridges and/or Informix datablades, although other domain-specific extension modules may be used.

Li, Chung-Sheng↗
NASA NTRS2013

High-Power, High-Speed Electro-Optic Pockels Cell Modulator

Electro-optic modulators rely on a change in the index of refraction for the optical wave as a function of an applied voltage. The corresponding change in index acts to delay the wavefront in the waveguide. The goal of this work was to develop a high-speed, high-power waveguide- based modulator (phase and amplitude) and investigate its use as a pulse slicer. The key innovation in this effort is the use of potassium titanyl phosphate (KTP) waveguides, making the highpower, polarization-based waveguide amplitude modulator possible. Furthermore, because it is fabricated in KTP, the waveguide component will withstand high optical power and have a significantly higher RF modulation figure of merit (FOM) relative to lithium niobate. KTP waveguides support high-power TE and TM modes - a necessary requirement for polarization-based modulation as with a Pockels cell. High-power fiber laser development has greatly outpaced fiber-based modulators in terms of its maturity and specifications. The demand for high-performance nonlinear optical (NLO) devices in terms of power handling, efficiency, bandwidth, and useful wavelength range has driven the development of bulk NLO options, which are limited in their bandwidth, as well as waveguide based LN modulators, which are limited by their low optical damage threshold. Today, commercially available lithium niobate (LN) modulators are used for laser formatting; however, because of photorefractive damage that can reduce transmission and increase requirements on bias control, LN modulators cannot be used with powers over several mW, dependent on wavelength. The high-power, high-speed modulators proposed for development under this effort will enable advancements in several exciting fields including lidarbased remote sensing, atomic interferometry, free-space laser communications, and others.

Hawthorne, Justin↗
DOE OSTI2020

The incommensurately modulated structures of low-temperature labradorite feldspars: a single-crystal X-ray and neutron diffraction study

Labradorite feldspars of the plagioclase solid solution series have been known for their complicated subsolidus phase relations and enigmatic incommensurately modulated structures. Characterized by the irrationally indexed e -reflections in the diffraction pattern, e -labradorite shows the largest variation in the incommensurate ordering states among the e -plagioclase structures. The strongly ordered low-temperature e -labradorite is one of the last missing pieces of the e -plagioclase puzzle. Nine plutonic and metamorphic labradorite feldspar samples from Canada, Ukraine, Minnesota (USA), Tanzania and Greenland with compositions ranging from An 52.5 to An 68 were studied with single-crystal X-ray diffraction. Two crystals from Labrador, Canada, and Duluth, MN, USA, with wide enough twin lamellae were analyzed with single-crystal neutron diffraction. The incommensurately modulated structures of e -plagioclase are refined for the first time with neutron diffraction data, which confirmed that the T—O distance modulation in the low-temperature e -plagioclase results from the Al–Si ordering in the framework. Detailed configurations of the M site are also observed in the structures refined from neutron diffraction data, which were not possible to see with X-ray diffraction data. The relation between the q -vectors and the mole% An composition is revealed for the entire compositional range of e -plagioclase, from An 25 to An 75 . The previously proposed two-trend relation depending on the cooling rate and phase transition path is confirmed. A new classification of e -plagioclase ( e α , e β and e γ ) is proposed based on the q -vector of the structure, which makes it an independent character from the presence/absence of density modulation. New parameters are proposed to quantify the ordering states of these complicated aperiodic structures of e -plagioclases, such as the difference between $\langle$T 1 o—O$\rangle$ and $\langle$T 1 m—O$\rangle$ at phase t = 0.2 or the normalized intensity of the (071\bar 1) reflection.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Global Modeling of Mineral Dust and its Optical Thickness

Global distribution of dust in the atmosphere has been simulated using the NASA Goddard chemical transport model (GEOS-CTM) to help retrieve the aerosol optical thickness from TOMS absorbing aerosol index. The model contains a dust module which accounts for sources and removal processes. The transport is driven by the assimilated meteorological fields generated by the NASA Goddard Earth Observing System Data Assimilation System (GEOS DAS). One of the key parameters, in the retrieval algorithm of optical thickness from Total Ozone Mapping Spectrometer (TOMS) data, is the vertical profile of aerosols. During the period 10- 19 September 1994, Lidar on-space Technology Experiment (LITE) was flown on space shuttle Discovery. The 53 hours of data collected cover the lower atmosphere from the earth surface to 20 kilometers altitude and from 57 N to 57 S with a high resolution of about 15 meters. The model results are compared with LITE data over the source regions of dust (Africa, Middle East, Asia, Australia) and in the remote troposphere (Atlantic and Pacific). The simulated horizontal distribution is compared with TOMS absorbing aerosol index. Finally the calculated optical thickness will be assessed with ground based sun-photometers (AERONET).

Ginoux, Paul A.↗
NASA NTRS1983

Airborne measurements of laser backscatter from the ocean surface

The data are taken with three different pulsed laser sources, one each in the ultraviolet (337.1 nm), visible (532.1 nm) and infrared (9.5 microns). The principal instrument is the airborne oceanographic lidar of the NASA Wallops Flight Facility. The data on mean laser backscatter and its variation with angle off nadir are found to be consistent with previous analytical work and some previous experimental work. The absolute calibration of this backscatter in terms of an effective Lambertian reflectance is less precise, but the data support values near nadir of approximately 0.20 for low wind speeds. It is noted that these values are 1 order of magnitude larger than the Fresnel reflectance for an air/water discontinuity in the refractive index. Whereas the normalized standard deviation (modulation factor) of backscatter is less well understood analytically, it is defined by these measurements to range from a few percent to over 50 percent at nadir and to increase off nadir as the tangent of theta or faster. The data are uncertain beyond 15 deg off nadir owing to a dynamic range limitation.

Bufton, J. L.↗
NASA NTRS1995

Measurements of Holographic Properties of Bacteriorhodopsin Films

Several different bacteriorhodopsin (BR) films are characterized with respect to general holographic properties. Experimental measurements include diffraction efficiency and sensitivity as functions of writing intensity and grating frequency, hologram thermal decay behavior, diffraction efficiency as a function of grating tilt within the film and modulation depth, and estimates of the refractive index change from the diffraction efficiency data. The films studied include those made from wildtype BR and the genetic variants D96N and D96N/T46V. The maximum diffraction efficiency measured was just over 3% for a hydrated wildtype BR film. The films' holographic properties were found to be relatively insensitive to grating frequency and grating tilt angle. The diffraction efficiency dropped off more sharply as a function of modulation depth than a purely linear medium, and only the hydrated wildtype film exhibited significant behavior variation with different writing intensities.

Downie, John D.↗
NASA NTRS1998

Magnetospheric Accretion in PSR 1259-63

We report the results from X-ray and hard X-ray observations of the PSR B1259-63/SS 2883 system with the ASCA and the CGRO satellites, performed between 1995 February and 1996 January when the pulsar was near apastron. The system was clearly detected in each of the two ASCA observations with luminosity in the 1-10 keV band of L(sub X) = (9 +/- 3) x 10(exp 32) (d/2 kpc) erg/ s, while OSSE did not detect significant hard X-rays from the system. X-ray spectra obtained with ASCA show a single power-law spectrum with a photon index of 1.6 +/- 0.3. No pulsations were detected in either the ASCA nor the OSSE data. Combined with previous results from X-ray and hard X-ray observations, we obtained binary modulation in X-ray luminosity and photon index of high energy emission from the system for the entire orbit. The results are in agreement with predictions based on synchrotron emission model from relativistic particles in a shocked pulsar wind interacting with the gaseous outflow from the Be star.

Cominsky, Lynn R.↗
NASA NTRS2004

Experimental Investigation of a Multiplex Fuel Injector Module With Discrete Jet Swirlers for Low Emission Combustors

A low-NOx emissions combustor concept has been demonstrated in flame-tube tests. A lean-direct injection (LDI) concept was used where the fuel is injected directly into the flame zone and the overall equivalence ratio of the mixture is lean. The LDI concept described in this report is a multiplex fuel injector module containing multipoint fuel injection tips and multi-burning zones. The injector module comprises 25 equally spaced injection tips within a 76 by 76 mm area that fits into the flame-tube duct. The air swirlers were made from a concave plate on the axis of the fuel injector using drilled holes at an angle to the axis of the fuel injector. The NOx levels were quite low and are greater than 70 percent lower than the 1996 ICAO standard. At an inlet temperature of 810 K, inlet pressure of 2760 kPa, pressure drop of 4 percent and a flame temperature of 1900 K with JP8 fuel, the NOx emission index was 9. The 25-point injector module exhibited the most uniform radial distribution of fuel-air mixture and NOx emissions in the flame tube when compared to other multipoint injection devices. A correlation is developed relating the NOx emissions to inlet temperature, inlet pressure, equivalence ratio and pressure drop.

Tacina, Robert↗
DOE OSTI2023

Design and optimization of a high-energy optical parametric amplifier for broadband, spectrally incoherent pulses

Spectrally incoherent laser pulses with sufficiently large fractional bandwidth are in demand for the mitigation of laser–plasma instabilities occurring in high-energy laser–target interactions. Here, we modeled, implemented, and optimized a dual-stage high-energy optical parametric amplifier for broadband, spectrally incoherent pulses in the near-infrared. The amplifier delivers close to 400 mJ of signal energy through noncollinear parametric interaction of 100-nJ-scale broadband, spectrally incoherent seed pulses near 1053 nm with a narrowband high-energy pump operating at 526.5 nm. Mitigation strategies for high-frequency spatial modulations in the amplified signal caused by index inhomogeneities in the Nd:YLF rods of the pump laser are explored and discussed in detail.

47 OTHER INSTRUMENTATION↗
NASA NTRS1983

Optimal trajectories for aeroassisted orbital transfer

Consideration is given to classical and minimax problems involved in aeroassisted transfer from high earth orbit (HEO) to low earth orbit (LEO). The transfer is restricted to coplanar operation, with trajectory control effected by means of lift modulation. The performance of the maneuver is indexed to the energy expenditure or, alternatively, the time integral of the heating rate. Firist-order optimality conditions are defined for the classical approach, as are a sequential gradient-restoration algorithm and a combined gradient-restoration algorithm. Minimization techniques are presented for the aeroassisted transfer energy consumption and time-delay integral of the heating rate, as well as minimization of the pressure. It is shown that the eigenvalues of the Jacobian matrix of the differential system is both stiff and unstable, implying that the sequential gradient restoration algorithm in its present version is unsuitable. A new method, involving a multipoint approach to the two-poing boundary value problem, is recommended.

Miele, A.↗
NASA NTRS1987

Space station interior noise analysis program

Documentation is provided for a microcomputer program which was developed to evaluate the effect of the vibroacoustic environment on speech communication inside a space station. The program, entitled Space Station Interior Noise Analysis Program (SSINAP), combines a Statistical Energy Analysis (SEA) prediction of sound and vibration levels within the space station with a speech intelligibility model based on the Modulation Transfer Function and the Speech Transmission Index (MTF/STI). The SEA model provides an effective analysis tool for predicting the acoustic environment based on proposed space station design. The MTF/STI model provides a method for evaluating speech communication in the relatively reverberant and potentially noisy environments that are likely to occur in space stations. The combinations of these two models provides a powerful analysis tool for optimizing the acoustic design of space stations from the point of view of speech communications. The mathematical algorithms used in SSINAP are presented to implement the SEA and MTF/STI models. An appendix provides an explanation of the operation of the program along with details of the program structure and code.

Stusnick, E.↗
DOE OSTI2026

Development of Advanced, Radiation Resistant, Optical-based Detector Technology for Future Experiments.

The primary objective of this project has been to advance the design of high-performance electromagnetic (EM) calorimeters for future particle physics experiments, to identify and measure the timing, position and energy of electrons, positrons and gamma rays, particularly in high-luminosity environments with intense radiation and pileup conditions. To meet such challenges, the proposed research has focused on the development of ultra-compact, radiation-hard calorimeter modules, to provide excellent timing, spatial, and energy resolution. The work aligns with the DOE’s Basic Research Needs (BRN) for High Energy Physics (HEP) Instrumentation and the research team contributes actively to the Coordinating Panel on Advanced Detectors (CPAD) RDC9 calorimetry collaboration in the USA and the European Committee on Future Accelerators (ECFA) DRD-CALO calorimetry collaboration at CERN, the European Laboratory for Particle Physics located in Geneva, Switzerland. The research builds on the RADiCAL (radiation-hard, ultra-compact) modular sampling calorimeter approach, developed by the research team, which employs dense and very bright optical materials such as LYSO:Ce scintillator plates that are interleaved with very dense tungsten plates to minimize detector size while optimizing performance. The modules are comparable in size to a human index finger, dimensionally 14 mm x 14 mm in cross section and 135 mm in length. And despite the small size, the structure is capable of providing excellent timing and energy resolution. This is facilitated through the use of specialized quartz capillaries filled with wavelength-shifting filaments, positioned at various depths along the length of a module, to collect and guide light signals to silicon photomultipliers (SiPMs) which detect and convert the optical signals to electronic signals for analysis. The primary goals of this project have been: (1) Achieve a timing resolution to σ t ≤ 30 ps for high-energy electrons and photons, important for their association with specific events produced in colliding-beam experiments and for the detection of decays-in-flight of long-lived particles. The project has achieved this goal in beam tests of a single RADiCAL module at CERN, during which a timing resolution of σ t = 27 ps was measured for electrons of energy E = 150 GeV. Based upon a mathematical fit to the data measured over a broad energy range from low energy to high energy, a resolution of σ t ≤ 18 ps has been estimated for electrons of very high (TeV) energy. From these measurements and with further expected technical improvements, the timing resolution should reach σ t ≤ 10 ps, important for searches for discovery physics in upcoming and future experiments. (2) Achieve an energy resolution of σ E / E ≤ 10% / $\sqrt{E}$. The project has yet to achieve this goal, but is close to it, having measured a value of σ E / E ≤ 15.9% / $\sqrt{E}$ using a modular array. Ultimately, the resolution goal is expected to be reached by adjustments to material thicknesses within the modules, which will improve the sampling fraction to measure more precisely the shower energy for lower energy particles. The versatility of the modular RADiCAL approach enables the testing of advanced materials, photosensors and electronics, developed in collaboration with CPAD RDC and ECFA DRD-CALO groups. The structure can distinguish electrons, positrons and gamma rays from hadrons and muons and beam-induced backgrounds, making it a valuable tool in a variety of detector environments, including future circular colliders (FCC-ee, FCC-hh) proposed for the European Laboratory for Particle Physics (CERN), the muon-collider proposed for Fermi National Accelerator Laboratory (Fermilab), and searches for new physics in beam-dump, fixed target and forward-physics experiments. And, while designed with particle physics applications in mind, the technologies developed in this project have the potential for application more broadly in particle and nuclear physics, materials science, and medical physics, underscoring the far-reaching potential of this line of instrumentation research and development.

47 OTHER INSTRUMENTATION↗
NASA NTRS1999

Resonant Transmissive Modulator Construction for Use in Beam Steering Array

An agile electronically configurable optical beam steering device for use in directional free-space transmission of optical signals is described. The device design employs an array of tunable resonant transmissive modulators constructed from multi-layered stacks of electro-optically active dielectric materials. Each modulator may be individually configured to transmit an optical signal with a specific amount of phase and group velocity modulation. The resulting diffractive interactions between modulator outputs provide a method for directional optical signal transmission. Of particular focus within this presentation is the optimized design of the individual modulator. It is widely known that periodic multi-layered stacks of dielectric materials exhibit reflective and transmissive resonances as described by the stack's transmission function. If an electric field is applied normal to the stack's layers, phenomena such as the electro-optic effect and/or the quantum-confined Stark effect may be employed to change the effective refractive index within the stack. This refractive index change alters the stack's transmission function and modulates the phase and group velocity of the transmitted optical signal. By varying the parameters that describe the stack's specific construction and operation, such as number of layers within the stack, refractive indexes of stack materials, layer thicknesses, and combinations of periodic verses non-periodic layer repetitions, custom transmittance functions may be generated. The transmitted optical signal carrier frequency and bandwidth must be carefully selected to maximize transmission and to minimize absorption. A computational optimization of the variables describing the stack's construction strives to maximize the amount of optical signal modulation verses applied voltage. Trade-offs between methods of increasing device performance verses the limitations of fabrication technologies are considered.

Keys, Andrew S.↗