Search NASA⌕ Search

SEARCH · Search NASA

Results for “intensifier”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Intensifying Renewable Energy Droughts in the Western U.S. Amid Evolving Infrastructure and Climate

If renewable energy resources continue to become a larger part of the generation mix in the United States (U.S.), so does the potential impact of prolonged periods of low wind and solar generation, known as variable renewable energy (VRE) droughts. In such a future, naturally occurring VRE droughts need to be evaluated for their potential impact on grid reliability. This study is the first of its kind to examine the impacts of compound VRE energy droughts in the Western U.S. across a range of potential future climate and infrastructure scenarios. We find that compound VRE drought severity may increase significantly in the future, primarily due to the dramatic increase in wind and solar generation needed in some future infrastructure scenarios. We find that in our future climate scenario, the variability of energy drought severity increases, which has implications for sizing energy storage necessary for mitigating drought events. We also examine the spatial patterns of compound VRE drought events that effect multiple regions of the grid simultaneously. These co-occurring events have distinct spatial patterns depending on the season. We observed overall fewer connected events in the future with the combined effect of potential climate and infrastructure changes, although in the fall we observe a climate-induced shift toward events which impact more regions simultaneously.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Unveiling four decades of intensifying precipitation from tropical cyclones using satellite measurements

Increases in precipitation rates and volumes from tropical cyclones (TCs) caused by anthropogenic warming are predicted by climate modeling studies and have been identified in several high intensity storms occurring over the last half decade. However, it has been difficult to detect historical trends in TC precipitation at time scales long enough to overcome natural climate variability because of limitations in existing precipitation observations. We introduce an experimental global high-resolution climate data record of precipitation produced using infrared satellite imagery and corrected at the monthly scale by a gauge-derived product that shows generally good performance during two hurricane case studies but estimates higher mean precipitation rates in the tropics than the evaluation datasets. General increases in mean and extreme rainfall rates during the study period of 1980–2019 are identified, culminating in a 12–18%/40-year increase in global rainfall rates. Overall, all basins have experienced intensification in precipitation rates. Increases in rainfall rates have boosted the mean precipitation volume of global TCs by 7–15% over 40 years, with the starkest rises seen in the North Atlantic, South Indian, and South Pacific basins (maximum 59–64% over 40 years). In terms of inland rainfall totals, year-by-year trends are generally positive due to increasing TC frequency, slower decay over land, and more intense rainfall, with an alarming increase of 81–85% seen from the strongest global TCs. As the global trend in precipitation rates follows expectations from warming sea surface temperatures (11.1%/°C), we hypothesize that the observed trends could be a result of anthropogenic warming creating greater concentrations of water vapor in the atmosphere, though retrospective studies of TC dynamics over the period are needed to confirm.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Rising temperatures intensify drought propagation and severity across the contiguous United States

Droughts can propagate from meteorological droughts (MD) into agricultural (AD) and hydrological droughts (HD). However, the mechanisms by which rising temperatures and changes in precipitation amount influence MD propagation, and how these dynamics vary across U.S., are not yet fully understood. This gap is critical given the U.S.’s diverse climates and land-use patterns, which lead to region-specific drought vulnerabilities and impacts, such as the 2012 AD in the Great Plains and the 2014 HD in the western U.S. Using a dynamical-statistical framework, we assess warming impacts on drought propagation. Results reveal that the Midwest and Southeast, key agricultural regions, show the largest increases in MD propagation to AD/HD, driven by rising temperatures and declining precipitation, though magnitudes vary regionally. In contrast, the Northeast shows reduced propagation due to increased year-round precipitation. Higher-intensity AD/HD events become disproportionately more likely, with rates varying by region and MD intensity.

Yan, Hongxiang [Pacific Northwest National Laborat↗
DOE OSTI2021

Increased extreme rains intensify erosional nitrogen and phosphorus fluxes to the northern Gulf of Mexico in recent decades

Abstract Soil erosion delivers enormous amounts of macro-nutrients including nitrogen (N) and phosphorus (P) from land to rivers, potentially sustaining water column bioavailable nutrient levels for decades. In this study, we represent erosional N and P fluxes in the Energy Exascale Earth System Model (E3SM) and apply the model to the continental United States. We estimate that during 1991–2019 soil erosion delivers 775 Gg yr −1 (1 Gg = 10 9 g) of particulate N (PN) and 328 Gg yr −1 of particulate P (PP) on average to the drainage basins of the northern Gulf of Mexico, including the Mississippi/Atchafalaya River and other rivers draining to the Texas Gulf and the Eastern Gulf. Our model simulation shows that in these rivers PP is the dominant P constituent and over 55% of P exported by erosion comes from soil P pools that could become bioavailable within decades. More importantly, we find that during 1991–2019 erosional N and P fluxes increase at rates of about 15 Gg N yr −1 and 6 Gg P yr −1 , respectively, due to increased extreme rains in the Mississippi/Atchafalaya river basin, and this intensification of erosional N and P fluxes drive the significant increase of riverine PN and PP yields to the northern Gulf of Mexico. With extreme rains projected to increase with warming, erosional nutrient fluxes in the region would likely continue to rise in the future, thus complicating the effort of reducing eutrophication in the inland and coastal waters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Variational AutoEncoders Reveal Intensifying GPP Extremes in Continental United States based on CESM2 Simulations

Climate extremes significantly impact terrestrial carbon cycle dynamics, necessitating robust methods for detecting and analyzing anomalous behavior in plant productivity. This study presents a novel application of variational autoencoders (VAE) for identifying extreme events in gross primary productivity (GPP) from Community Earth System Model version 2 simulations across four AR6 regions in the Continental United States. We compare VAE-based anomaly detection with traditional singular spectral analysis (SSA) methods across three time periods: 1850-80, 1950-80, and 2050-80 under SSP5-8.5 scenario. The VAE architecture employs three dense layers and a latent space with input sequence length of 12 months, training on normalized GPP time series to reconstruct the GPP and identify anomalies based on reconstruction errors. Extreme events are defined using 5th percentile thresholds applied to both VAE and SSA anomalies. Results demonstrate strong regional agreement between VAE and SSA methods in spatial patterns of extreme event frequencies, despite VAE consistently producing higher threshold values (179-756 GgC for VAE vs. 100-784 GgC for SSA across regions and periods). Both methods reveal increasing magnitudes and frequencies of negative carbon cycle extremes toward 2050-80, particularly in Western and Central North America. The VAE approach shows comparable performance to established SSA techniques while offering computational advantages and enhanced capability for capturing non-linear temporal dependencies in carbon cycle variability. This research demonstrates the potential of deep learning approaches for extremes detection and provides a foundation for improved understanding of future carbon cycle risks under future conditions.

Sharma, Bharat [ORNL] (ORCID:0000000266982487)↗
DOE OSTI2022

An Intensified Electro-Catalytic Process for Production of Formic Acid from Power Plant CO 2 Emissions (Final Technical Report)

The goal of this project was to develop and test a novel electro-catalytic method for the production of high-value formic acid from coal-derived CO 2 as a strategy to offset the cost of CO 2 capture. Formic acid is currently produced from the conversion of higher-order carbon products such as methane and/or methanol. This electro-catalytic CO 2 reduction process utilizes a highly selective catalyst in a flow-through reactor design to maximize the formic acid production rate. The specific objectives of this proposed study were to; 1) produce and screen highly selective engineered CO 2 reducing catalysts capable of exclusively producing formic acid; 2) immobilize the catalyst within a flow process to continually produce formic acid and increase catalyst lifetime; and 3) assess the stability of the electrocatalyst during long-term operation. The project involved the development and testing of an engineered catalyst to selectively reduce CO 2 directly and exclusively to formic acid. After the best-performing catalyst was selected, it was immobilized and tested inside a flow-through reactor at UK CAER using realistic conditions expected from CO 2 produced during coal combustion and separated by a CO 2 capture plant.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Conversion of syngas into light olefins in one step for process-intensified production of sustainable aviation fuels

Here, we report on a preliminary investigation for direct conversion of syngas into olefins. This technology combines alcohol(s) production and olefin(s) production into a single unit operation to improve process efficiencies due to the overcoming of equilibrium limitations and also to offer capital savings relative to current synthesis approaches including Fischer-Tropsch synthesis, methanol-to-olefins followed by olefins to gasoline/distillate process and alcohol-to-jet process.

10 SYNTHETIC FUELS↗
DOE OSTI2025

ROTA-CAP™: An Intensified Carbon Capture System Using Rotating Packed Beds (Final Scientific/Technical Report)

GTI Energy and Carbon Clean Solutions Limited successfully designed, constructed, and operated an integrated ROTA-CAP carbon capture skid. ROTA-CAP™ is a process intensification technology, applied for post-combustion carbon capture, which utilizes the centrifugal forces generated from rotation of rotating packed beds as well as advanced solvents to achieve increased mass transfer rates 1-2 orders of magnitude higher than conventional columns while substantially decreasing footprint. The test skid, which consisted of a dual stage RPB absorber with external interstage cooling and a single stage RPB regenerator, was operated at capacities up to 0.5 tonne/day of CO 2 capture with flue gas concentrations ranging from 4% to 22% CO 2 by vol. CO 2 removal rates greater than 95% were achieved, with CO 2 product purity also exceeding 95% by vol. Over 1,600 hours of operation were accumulated throughout the project, including over 1,000 hours of operation of the with real flue gas containing at least 9.8% CO 2 by vol. The skid was operated continuously for 24 hours per day and 7 days per week over the course of 7 long-term test campaigns, with the campaigns ranging from approximately 2-4 weeks per campaign. A techno-economic analysis was performed, and a cost of capture of $\$$41.18/tonne CO 2 was calculated for the ROTA-CAP process, compared to $\$$45.75/tonne for a Cansolv-based process. These results show a cost reduction of approximately 10% compared to the Cansolv-based process. Although this still exceeds the target cost of capture of $\$$30/tonne specified for this project, GTI expects that the cost of capture can be further reduced through further optimization of the design and technology. GTI also performed an engineering design review to determine the scale-up potential of the technology, with the results of the preliminary assessment indicating that it appears to be feasible to scale up the RPB technology to 4,000 TPD. It was also determined that both horizontal and vertical rotor orientations are feasible, though there are mechanical advantages to the vertical orientation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Estuarine hurricane wind can intensify surge-dominated extreme water level in shallow and converging coastal systems

Based on the projected increase in hurricane landfall frequency on the middle to lower US east coast, we examined the crucial role of the estuarine wind field in exacerbating coastal flooding. A regionally refined atmospheric and two high-resolution hydrology and ocean models are integrated to provide plausible and physically consistent ensembles of hurricane events and the associated flooding inside the Delaware Bay and River, a US mid-Atlantic estuary. Model results show that the hurricane propagation direction, estuarine geometry, remote surge from the open ocean, and direct nearshore upwind stress could magnify the flood magnitude. More specifically, inland-bound tracks that make landfall before reaching the mid-Atlantic coast produce a more significant surge within Delaware Bay than the shore-parallel tracks, where the estuarine wind direction plays the primary role in surge amplification. Ultimately, this study emphasized the need for integrated models to capture the nonlinear dynamics and interactions in flood hazard modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Optimal Design of Intensified Towers for CO2 Capture with Internal, Printed Heat Exchangers

Solvent-based carbon capture processes typically suffer from the temperature rise of the solvent due to the heat of absorption of CO2. This increased temperature is not thermodynamically favor-able and results in a significant reduction in performance in the absorber column. As opposed to interstage coolers, which only remove, cool, and return the solvent at discrete locations in the column, internal coolers that are integrated with the packing can cool the process inline, which can result in improved efficiency. This work presents the modeling of these internal coolers within an existing generic, equation-oriented absorber column model that can cool the process while allowing for simultaneous mass transfer. Optimization of this model is also performed, which is capable of optimally choosing the best locations to place these devices, such that heat removal and mass transfer area are balanced. Results of the optimization have shown that optimally placed cooling elements result in a significant increase in the capture efficiency of the process, compared to a similar column with no internal cooling, with a common trend being the cooling of the column in the temperature bulge region. It is observed that by optimally placing an internal cooler, the solvent flow rate can be decreased, and the CO2 lean loading can be increased while still maintaining the same efficiency. These process changes can lead to a substantial reduction in costs due to lower reboiler duty.

Summits, Stephen↗
NASA NTRS1977

Magnifying image intensifier

Coil assembly for zoom operation produces axial magnetic flux density that decreases in strength from photocathode to target. This results in magnification factor greater than unity. To extend magnification range, field is reversed in direction between object and image planes.

Vine, J.↗
NASA NTRS1978

Alinement tool for X-ray image intensifiers

Gage consists of upper plate and lower plate connected by aluminum post marked with metric scale. Upper plate is identical to calibration plate except for post flange. Lower plate is made of aluminum and is grooved for x-y coordinates and pattern of concentric rings that aid in recognition and measurement of nonlinearity. X-y coordinates on upper and lower plates match exactly. Gage indicates amount and direction of skew in images.

Rasmussen, D.↗
NASA NTRS1976

Image intensifier tube observations of the OH airglow during the Space Shuttle simulation

The OH airglow studies discussed have evolved from a lead-sulfide-cell scanning photometer to photographic techniques to, currently, image-tube photography. During the Space Shuttle Simulation, photography (35-mm and 16-mm) and filter-wheel photometry of submicron OH airglow were performed aboard the NASA CV990 Airborne Laboratory. Examples of ground-based and airborne photographs are presented for comparison. Analysis of the aircraft data is described.

Peterson, A. W.↗