Search NASA⌕ Search

SEARCH · Search NASA

Results for “interval order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

In Vivo Proton Beam Range Verification Using Spine MRI Changes

Purpose: In proton therapy, uncertainty in the location of the distal dose edge can lead to cautious treatment plans that reduce the dosimetric advantage of protons. After radiation exposure, vertebral bone marrow undergoes fatty replacement that is visible on magnetic resonance imaging (MRI). This presents an exciting opportunity to observe radiation dose distribution in vivo. We used quantitative spine MRI changes to precisely detect the distal dose edge in proton radiation patients. Methods and Materials: We registered follow-up T1-weighted MRI images to planning computed tomography scans from 10 patients who received proton spine irradiation. A radiation dose-MRI signal intensity curve was created using the lateral beam penumbra in the sacrum. This curve was then used to measure range errors in the lumbar spine. Results: In the lateral penumbra, there was an increase in signal intensity with higher dose throughout the full range of 0-37.5 Gy (RBE). In the distal fall-off region, the beam sometimes appeared to penetrate farther than planned. The mean overshoot in 10 patients was 1.9 mm (95% confidence interval, 0.8-3.1 mm), on the order of the uncertainties inherent to our range verification method. Conclusions: We have demonstrated in vivo proton range verification using posttreatment spine MRI changes. Our analysis suggests the presence of a systematic overshoot of a few millimeters in some proton spine treatments, but the range error does not exceed the uncertainty incorporated into the treatment planning margin. It may be possible to extend our technique to MRI sequences that show early bone marrow changes, enabling adaptive treatment modification.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Gamma-ray tracking for high energy gamma-ray imaging in pixelated CdZnTe

Sequencing gamma-ray interactions within a detector system is an integral component of Compton imaging. In detectors with poor timing resolution compared to the time interval of successive interactions, algorithms which order gamma-ray interactions must be implemented using only energy and position information. This work examines previous algorithms and inspects interaction kinematics to increase the sequencing algorithm’s speed and effectiveness. The proposed method, in which the first interaction is assumed to deposit the largest energy, has improved sequencing performance by greater than 20% for full energy gamma ray depositions larger than 1 MeV that do not contain pair-production. In addition, the algorithm shows a decrease in computational costs for sequence reconstruction to allow for better real time reconstruction. Experimental results show an almost twofold increase in the signal to noise ratio (SNR) for simple backprojection images of a 22 Na source. Additional measurements of the 2.2 MeV gamma rays from H 1 (n,$\gamma$)D 2 neutron capture demonstrates the proposed algorithm’s superior performance.

3D position sensitive CdZnTe↗

X-ray streak camera cathode development and timing accuracy of the 4{omega} ultraviolet fiducial system at the National Ignition Facility

The convergent ablator experiments at the National Ignition Facility (NIF) are designed to measure the peak velocity and remaining ablator mass of an indirectly driven imploding capsule. Such a measurement can be performed using an x-ray source to backlight the capsule and an x-ray streak camera to record the capsule as it implodes. The ultimate goal of this experiment is to achieve an accuracy of 2% in the velocity measurement, which translates to a {+-}2 ps temporal accuracy over any 300 ps interval for the streak camera. In order to achieve this, a 4{omega} (263 nm) temporal fiducial system has been implemented for the x-ray streak camera at NIF. Aluminum, titanium, gold, and silver photocathode materials have been tested. Aluminum showed the highest relative quantum efficiency, with five times more peak signal counts per fiducial pulse when compared to Gold. The fiducial pulse data were analyzed to determine the centroiding statistical accuracy for incident laser pulse energies of 1 and 10 nJ, showing an accuracy of {+-}1.6 ps and {+-}0.7 ps, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Traveling wave parametric amplifier with Josephson junctions using minimal resonator phase matching

Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted λ/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12 dB across a 4 GHz span, along with an average saturation power of −92 dBm with noise approaching the quantum limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constraining the dark energy equation of state using Bayes theorem and the Kullback–Leibler divergence

Data-driven model-independent reconstructions of the dark energy equation of state w(z) are presented using Planck 2015 era CMB, BAO, SNIa and Lyman-α data. These reconstructions identify the w(z) behaviour supported by the data and show a bifurcation of the equation of state posterior in the range 1.5 < z < 3. Although the concordance ΛCDM model is consistent with the data at all redshifts in one of the bifurcated spaces, in the other a supernegative equation of state (also known as ‘phantom dark energy’) is identified within the 1.5σ confidence intervals of the posterior distribution. In order to identify the power of different datasets in constraining the dark energy equation of state, we use a novel formulation of the Kullback–Leibler divergence. Moreover, this formalism quantifies the information the data add when moving from priors to posteriors for each possible dataset combination. The SNIa and BAO datasets are shown to provide much more constraining power in comparison to the Lyman-α datasets. Furthermore, SNIa and BAO constrain most strongly around redshift range 0.1 - 0.5, whilst the Lyman-α data constrains weakly over a broader range. We do not attribute the supernegative favouring to any particular dataset, and note that the ΛCDM model was favoured at more than 2 log-units in Bayes factors over all the models tested despite the weakly preferred w(z) structure in the data.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct Bound on the Total Decay Width of the Top Quark in pp Collisions at {radical}(s)=1.96 TeV

We present the first direct experimental bound on the total decay width of the top quark, {gamma}{sub t}, using 955 pb{sup -1} of the Tevatron's pp collisions recorded by the Collider Detector at Fermilab. We identify 253 top-antitop pair candidate events. The distribution of reconstructed top quark mass from these events is fitted to templates representing different values of the top quark width. Using a confidence interval based on likelihood-ratio ordering, we extract an upper limit at 95% C.L. of {gamma}{sub t}<13.1 GeV for an assumed top quark mass of 175 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rodeo Algorithm for Quantum Computing

We present a stochastic quantum computing algorithm that can prepare any eigenvector of a quantum Hamiltonian within a selected energy interval $\ [E-\epsilon, E+\epsilon]$. In order to reduce the spectral weight of all other eigenvectors by a suppression factor δ, the required computational effort scales as $\ O[|\log \delta|/(p \epsilon)]$, where p s the squared overlap of the initial state with the target eigenvector. The method, which we call the rodeo algorithm, uses auxiliary qubits to control the time evolution of the Hamiltonian minus some tunable parameter E . In this manner, we converge to the target eigenvector with exponential accuracy in the number of measurements. In addition to preparing eigenvectors, the method can also compute the full spectrum of the Hamiltonian. We illustrate the performance with several examples. For energy eigenvalue determination with error $\epsilon$, the computational scaling is $\ O[(\log \epsilon)^2/(p \epsilon)]$. For eigenstate preparation, the computational scaling is $\ O(\log \Delta/p)$, where $\Delta$ is the magnitude of the orthogonal component of the residual vector. The speed for eigenstate preparation is exponentially faster than that for phase estimation or adiabatic evolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the Kinetics of the Phase Transition of the First Order in Tetracosane C{sub 24}H{sub 50} by Fourier-Transform IR Spectroscopy

The kinetics of the development of the structural phase transition of the first order in monodisperse samples of tetracosane C{sub 24}H{sub 50} has been studied using Fourier-transform IR spectroscopy. Temperature dependences of frequencies and intensities of rocking (in the region of ν ~ 720 cm{sup –1}) and bending (in the region of ν ~ 1470 cm{sup –1}) vibration modes of CH{sub 2} groups in trans methylene sequences in crystalline cores of elementary lamellae has been analyzed. It has been shown that the solid-phase transition of the first order develops by the heterogeneous mechanism in a narrow temperature interval ΔT ~ 2 K according to the theory of diffuse phase transitions of the first order and is caused by changes in the symmetry of crystallographic cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lunar shape via the Apollo laser altimeter.

The laser altimeter data obtained from the Apollo 15 and Apollo 16 missions provide two elevation cross sections of the moon separated by 35 degrees of latitude. The data consist of measurements of the distance from the orbiting Command and Service Module (CSM) to the lunar surface at intervals of about 20 seconds. In order to extract the lunar shape parameters from the data, the position of the CSM must be known. This was accomplished by reducing the data from earth-based radio tracking of the CSM. The most striking result obtained in the studies is the consistency of the center of gravity offset in both the X and Y directions.

Sjogren, W. L.↗

Whistler waves observed upstream from collisionless shocks

Waves in the frequency range 0.5-4. Hz have been studied in the region upstream of the earth's bow shock with data from the flux-gate magnetic field experiment on Imp 6. Such waves are invariably detected adjacent to the shock, persisting upstream for intervals often less than a minute but occasionally of the order of many hours. Analysis of 150 examples of these waves during a 3-month interval indicates that propagation directions generally make angles of between 20 and 40 deg with the field direction. The waves as measured in the spacecraft frame of reference are either left- or right-hand-polarized with respect to the average field direction. The left-handed waves generally have lower frequencies than the right-handed waves, and the left-handed frequencies never exceed 2.5 Hz. The measured sense of polarization is found to depend on the propagation direction (or alternatively, the field direction) relative to the solar wind direction.

Fairfield, D. H.↗

Computational problems in autoregressive moving average (ARMA) models

The choice of the sampling interval and the selection of the order of the model in time series analysis are considered. Band limited (up to 15 Hz) random torque perturbations are applied to the human ankle joint. The applied torque input, the angular rotation output, and the electromyographic activity using surface electrodes from the extensor and flexor muscles of the ankle joint are recorded. Autoregressive moving average models are developed. A parameter constraining technique is applied to develop more reliable models. The asymptotic behavior of the system must be taken into account during parameter optimization to develop predictive models.

Agarwal, G. C.↗

Airborne-Managed Spacing in Multiple Arrival Streams

A significant bottleneck in the current air traffic system occurs at the runway. Expanding airports and adding new runways will help solve this problem; however, this comes at a significant cost, financially, politically and environmentally. A complementary solution is to safely increase the capacity of current runways. This can be achieved by precise spacing at the runway threshold with a resulting reduction in the spacing buffer required under today s operations. At the NASA Langley Research Center, the Advanced Air Transportation Technologies (AATT) Project is investigating airborne technologies and procedures that will assist the pilot in achieving precise spacing behind another aircraft. This new spacing clearance instructs the pilot to follow speed cues from a new on-board guidance system called Airborne Merging and Spacing for Terminal Arrivals (AMSTAR). AMSTAR receives Automatic Dependent Surveillance-Broadcast (ADS-B) reports from the leading aircraft and calculates the appropriate speed for the ownership to fly in order to achieve the desired spacing interval, time or distance-based, at the runway threshold. Since the goal is overall system capacity, the speed guidance algorithm is designed to provide system benefit over individual efficiency. This paper discusses the concept of operations and design of AMSTAR to support airborne precision spacing. Results from the previous stage of development, focused only on in-trail spacing, are discussed along with the evolution of the concept to include merging of converging streams of traffic. This paper also examines how this operation might support future wake vortex-based separation and other advances in terminal area operations. Finally, the research plan for the merging capabilities, to be performed during the summer and fall of 2004 is presented.

Barmore, Bryan↗

X-ray Streak Camera Cathode Development and Timing Accuracy of the 4w UV Fiducial System at the National Ignition Facility

The convergent ablator experiments at the National Ignition Facility (NIF) are designed to measure the peak velocity and remaining ablator mass of an indirectly driven imploding capsule. Such a measurement can be performed using an x-ray source to backlight the capsule and an x-ray streak camera to record the capsule as it implodes. The ultimate goal of this experiment is to achieve an accuracy of 2% in the velocity measurement, which translates to a {+-}2 ps temporal accuracy over any 300 ps interval for the streak camera. In order to achieve this, a 4-{omega} (263nm) temporal fiducial system has been implemented for the x-ray streak camera at NIF. Aluminum, Titanium, Gold and Silver photocathode materials have been tested. Aluminum showed the highest quantum efficiency, with five times more peak signal counts per fiducial pulse when compared to Gold. The fiducial pulse data was analyzed to determine the centroiding a statistical accuracy for incident laser pulse energies of 1 and 10 nJ, showing an accuracy of {+-}1.6 ps and {+-}0.7 ps respectively.

42 ENGINEERING↗

Peak Power Reduction for HVAC Operations in Multi-unit Commercial Buildings

The load profiles of most commercial consumers are characterized by brief periods of very high power consumption followed by intervals of relatively lower demand. In order to flatten commercial load profiles, several power utilities in addition to billing energy consumption, levy a demand charge (DC) on the monthly peak demand. In this work, we consider the problem of joint optimization of energy costs (EC) and DC incurred by a multi-unit building which follows a demand response (DR) program. Despite the non-linear structure of the problem, we show how the optimal solutions can be obtained efficiently using linear programming. We evaluate the performance of the proposed power control scheme for various climate zones in the US. We show that depending on the ambient conditions and the prescribed tariff structure, our strategy can result in savings of up to nearly 19% compared to the baseline.

Raza Naqvi, Syed A.↗

Application of Bf-EVALPSN to Real-time Process Order Control

We have already proposed a paraconsistent annotated logic program called EVALPSN. In this paper, EVALPSN is developed to deal with before-after relations between two processes (time intervals), and its application to real-time process order control based on logical safety verification.

99 GENERAL AND MISCELLANEOUS↗

Lattice distortion in the spin-orbital entangled state in RVO 3 perovskites

In this paper, we report a thorough study of Y 0.7 La 0.3 VO 3 single crystals by measuring magnetic properties, specific heat, thermal conductivity, Raman scattering, x-ray and neutron diffraction with the motivation of revealing the lattice response to the spin-orbital entanglement in RVO3. Upon cooling from room temperature, the orbitally disordered paramagnetic state changes around T*~220 K to a spin-orbital entangled state which is then followed by a transition at TN = 116 K to C-type orbital-ordered (OO) and G-type antiferromagnetic ordered (AF) ground state. In the temperature interval TN 6/2 octahedra have two comparable in-plane V-O bonds which are longer than the out-of-plane V-O1 bond. This octahedral site distortion supports the spin-orbital entanglement of partially filled and degenerate yz/zx orbitals. However, this distortion is incompatible with the steric octahedral site distortion intrinsic to orthorhombic perovskites. Their competition induces a second-order transition from the spin-orbital entangled state to a C-OO/G-AF ground state where the long-range OO suppresses the spin-orbital entanglement. Our analysis suggests that the spin-orbital entangled state and G-OO are comparable in energy and compete with each other. Rare-earth site disorder favors the spin-orbital entanglement rather than a cooperative Jahn-Teller distortion. The results also indicate for LaVO 3 a C-OO/G-AF state in T t ≤ T ≤TN and an orbital flipping transition at T t .

36 MATERIALS SCIENCE↗

High degree interpolation polynomial in Newton form

Polynomial interpolation is an essential subject in numerical analysis. Dealing with a real interval, it is well known that even if f(x) is an analytic function, interpolating at equally spaced points can diverge. On the other hand, interpolating at the zeroes of the corresponding Chebyshev polynomial will converge. Using the Newton formula, this result of convergence is true only on the theoretical level. It is shown that the algorithm which computes the divided differences is numerically stable only if: (1) the interpolating points are arranged in a different order, and (2) the size of the interval is 4.

Tal-Ezer, Hillel↗

COUNTING LOW-MASS STARS IN INTEGRATED LIGHT

Low-mass stars (M {approx}< 0.4 M{sub Sun }) are thought to comprise the bulk of the stellar mass of galaxies but they constitute only of order 1 percent of the bolometric luminosity of an old stellar population. Directly estimating the number of low-mass stars from integrated flux measurements of old stellar systems is therefore possible but very challenging, given the numerous variables that can affect the light at the percent level. Here we present a new population synthesis model created specifically for the purpose of measuring the low-mass initial mass function (IMF) down to {approx}0.1 M{sub Sun} for metal-rich stellar populations with ages in the range 3-13.5 Gyr. Our fiducial model is based on the synthesis of three separate isochrones, and a combination of optical and near-IR empirical stellar libraries in order to produce integrated light spectra over the wavelength interval 0.35 {mu}m < {lambda} < 2.4 {mu}m at a resolving power of R Almost-Equal-To 2000. New synthetic stellar atmospheres and spectra have been computed in order to model the spectral variations due to changes in individual elemental abundances including C, N, Na, Mg, Si, Ca, Ti, Fe, and generic {alpha} elements. We demonstrate the power of combining blue spectral features with surface gravity-sensitive near-IR features in order to simultaneously constrain the low-mass IMF, stellar population age, metallicity, and abundance pattern from integrated light measurements. Finally, we show that the shape of the low-mass IMF can also be directly constrained by employing a suite of surface gravity-sensitive spectral features, each of which is most sensitive to a particular mass interval.

79 ASTRONOMY AND ASTROPHYSICS↗