Search NASA⌕ Search

SEARCH · Search NASA

Results for “inversion and monitoring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Structural Analysis Methods for Structural Health Management of Future Aerospace Vehicles

Two finite element based computational methods, Smoothing Element Analysis (SEA) and the inverse Finite Element Method (iFEM), are reviewed, and examples of their use for structural health monitoring are discussed. Due to their versatility, robustness, and computational efficiency, the methods are well suited for real-time structural health monitoring of future space vehicles, large space structures, and habitats. The methods may be effectively employed to enable real-time processing of sensing information, specifically for identifying three-dimensional deformed structural shapes as well as the internal loads. In addition, they may be used in conjunction with evolutionary algorithms to design optimally distributed sensors. These computational tools have demonstrated substantial promise for utilization in future Structural Health Management (SHM) systems.

Tessler, Alexander↗

Pilot performance in zero-visibility precision approach

The pilot's short-term decisions regarding performance assessment and failure monitoring is examined. The performance of airline pilots who flew simulated zero-visibility landing approaches is reported. Results indicate that the pilot's mode of participation in the control task has a strong effect on his workload, the induced workload being lowest when the pilot acts as a monitor during a coupled approach and highest when the pilot is an active element in the control loop. A marked increase in workload at altitudes below 500 ft. is documented at all participation modes; this increase is inversely related to distance-to-go. The participation mode is shown to have a dominant effect on failure-detection performance, with a failure in a monitored (coupled) axis being detected faster than a comparable failure in a manually-controlled axis. Touchdown performance is also documented. It is concluded that the conventional instrument panel and its associated displays are inadequate for zero-visibility operations in the final phases of the landing approach.

Ephrath, A. R.↗

NuSD: A Geant4 based simulation framework for segmented anti-neutrino detectors

NuSD: Neutrino Segmented Detector is a Geant4-based user application that simulates inverse beta decay event in a variety of segmented scintillation detectors developed by different international collaborations. This simulation framework uses a combination of cross-programs and libraries including Geant4, ROOT and CLHEP developed and used by high energy physics community. It will enable the neutrino physics community to simulate and study neutrino interactions within different detector concepts using a single program. In addition to neutrino simulations in segmented detectors, this program can also be used for various research projects that use of scintillation detectors for different physics purposes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Video scrambler/descrambler

Video scrambler that operates on baseband signals uses relatively simple delay and inversion circuitry to alter television signal so that is is unrecognizable when picked up on TV monitor. Descrambler that uses essentially same circuit restores signal and allows original video information to be retrieved. Circuits allow only authorized parties to have access to transmitted information.

Lipoma, P. C.↗

Temperature and composition measurements from the l.r.i.r. and l.i.m.s. experiments on Nimbus 6 and 7

The limb radiance inversion radiometer (LRIR) on Nimbus 6 was the first orbiting infrared limb scanner; it has four channels with which to determine temperature, O3, and H2O in the stratosphere and low mesosphere. The limb infrared monitor of the stratosphere (LIMS) is a similar six-channel instrument which was launched on Nimbus 7 in October 1978 in order to measure O3, H2O, NO2, and HNO3. The instrumentation and inversion techniques are briefly described, and the application of limb scanner data to the study of photochemical, dynamical, and transport problems is discussed.

Gille, J. C.↗

Microseismic at HFTS2: A Story of Three Stimulated Wells

A microseismic data set was acquired at Hydraulic Fracturing Test Site 2 (HFTS2) in the Delaware Basin (Texas, USA) by the HFTS2 consortium as a part of data-collection program designed to help maximize the efficiency of hydraulic fracturing, understand the impacts of nearby depleted zones, and increase the production of hydrocarbons. Advanced methods of microseismic monitoring applied at HFTS2 include 1) native synchronization of five monitor arrays, 2) real-time location of microseismic events, 3) joint event hypocenter/ velocity-model inversion that locates microseismic events simultaneously with constructing azimuthally anisotropic velocity models, 4) high-resolution reservoir imaging, utilizing microseismic events as downhole sources. HFTS2 microseismic data set illustrated the influence of geologic complexity, variations in treatment designs, and the presence of parent wells on the efficiency of hydraulic fracturing. Three Wolfcamp wells, Boxwood 1H, 2H, and 4H, were stimulated sequentially, exhibiting very different patterns of microseismicity. When the Boxwood 1H well is stimulated, its toe stages quickly reacted to the presence of depleted Bitterroot section to the east of the Boxwood pad, extending microseismic events over 3,000 ft to the east. This behavior changes dramatically after the treatment passes the Bitterroot section at the toe, and the heel stages in 1H showed tight microseismic grouping around the stimulated well, indicative of treatment of virgin reservoir rock. The Boxwood 2H demonstrates this same pattern of behavior between the toe and heel stages of the well, suggesting that the depleted Bitterroot section remains easier to refracture than adjacent non-depleted rock. Microseismic activity associated with Boxwood 4H treatment is distinctly different from those in Boxwood wells 1H and 2H. The events generated during stimulation of 4H are hardly influenced by the depleted Bitterroot section and fill the space between the previously stimulated 1H and 2H wells. Altogether, microseismic patterns suggest that treatment fluids tend to find the weakest passages through geologic formations, and the relative well positions and treatment sequence have a significant impact on fracture geometry, as indicated by microseismic event locations.

58 GEOSCIENCES↗

Long-term Global Morphology of Gravity Wave Activity Using UARS Data

An extensive body of research this quarter is documented. Further methodical analysis of temperature residuals in Cryogenic Limb Array Etalon Spectrometer (CLAES) Version 8 level 3AT data show signatures during December 1992 at middle and high northern latitudes that, when compared to Naval Research Laboratory/Mountain Wave Forecast Model (NRL)/(MWFM) mountain wave hindcasts, reveal evidence of long mountain waves in these data over Eurasia, Greenland, Scandinavia and North America. The explicit detection of gravity waves in limb-scanned Cryogenic Infrared Spectrometers and Telescopes for the Atmosphere (CRISTA) temperatures is modeled at length, to derive visibility functions. These insights are used to convert CRISTA gravity wave temperature residuals into data that more closely resemble gravity wave fluctuations detected in data from other satellite instruments, such as Microwave Limb Sounder (MLS), Limb Infrared Monitor of the Stratosphere (LIMS) and Global Positioning System/Meteorology (GPS)/(MET). Finally, newly issued mesospheric temperatures from inversion of CRISTA 15gin emissions are analyzed using a new method that uses separate Kalman fits to the ascending and descending node data. This allows us to study global gravity wave amplitudes at two local times, 12 hours apart. In the equatorial mesosphere, where a large diurnal tidal temperature signal exists, we see modulations of gravity wave activity that are consistent with gravity wave-tidal interactions produced by tidal temperature variability.

Eckermann, Stephen D.↗

GES DISC Greenhouse Gas Data Sets and Associated Services

NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) archives and distributes rich collections of data on atmospheric greenhouse gases from multiple missions. Hosted data include those from the Atmospheric Infrared Sounder (AIRS) mission (which has observed CO2, CH4, ozone, and water vapor since 2002); legacy water vapor and ozone retrievals from TIROS Operational Vertical Sounder (TOVS); and Upper Atmosphere Research Satellite (UARS) going back to the early 1980s. GES DISC also archives and supports data from seven projects of the Making Earth System Data Records for Use in Research Environments (MEaSUREs) program that have ozone and water vapor records. Greenhouse gases data from the A-Train satellite constellation is also available: (1) Aura-Ozone Monitoring Instrument (OMI) and Microwave Limb Sounder (MLS) ozone, nitrous oxide, and water vapor since 2004; (2) Greenhouse Gases Observing Satellite (GOSAT) CO2 observations since 2009 from the Atmospheric CO2 Observations from Space (ACOS) task; and (3) Orbiting Carbon Observatory-2 (OCO-2) CO2 data since 2014. The most recent related data set that the GES DISC archives is methane flux for North America, as part of NASAs Carbon Monitoring System (CMS) project. This dataset contains estimates of methane emission in North America based on an inversion of the GEOS-Chem chemical transport model constrained by GOSAT observations (Turner et al., 2015). Along with data stewardship, an important focus area of the GES DISC is to enhance the usability of its data and broaden its user base. Users have unrestricted access to a new user-friendly search interface, which includes many services such as variable subsetting, format conversion, quality screening, and quick browse. The majority of the GES DISC data sets are also accessible through Open-source Project for a Network Data Access Protocol (OPeNDAP) and Web Coverage Service (WCS). The latter two services provide more options for specialized subsetting, format conversion, and image viewing. Additional data exploration, data preview, and preliminary analysis capabilities are available via NASA Giovanni, which obviates the need forusers to download the data (Acker and Leptoukh, 2007). Giovanni provides a bridge between the data and science and has been very successful in extending GES DISC data to educational users and to users with limited resources.

data ordering↗

Invertible neural networks for real-time control of extrusion additive manufacturing

Material extrusion additive manufacturing (AM) has enabled an elegant fabrication pathway for a vast material library. Nonetheless, each material requires optimization of printing parameters generally determined through significant trial-and-error testing. To eliminate arduous, iteration-based optimization approaches, many researchers have used machine learning (ML) algorithms which provide opportunities for automated process optimization. Here, in this work, we demonstrate the use of an ML-driven approach for real-time material extrusion print-parameter optimization through in-situ monitoring of printed line geometry. To do this, we use deep invertible neural networks (INNs) which can solve both forward and inverse, or optimization, problems using a single network. By combining in-situ computer vision and deep INNs, the printing parameters can be autonomously optimized to print a target line width in 1.2 s. Furthermore, defects that occur during printing can be rapidly identified and corrected autonomously. The methods developed and presented in this work eliminate user-intensive, time-consuming, and iterative parameter discovery approaches that currently limit accelerated implementation of extrusion-based AM processes. Furthermore, the presented approach can be generalized to provide real-time monitoring and optimization pathways for increasingly complex AM environments.

36 MATERIALS SCIENCE↗

Assessing the design of integrated methane sensing networks

Abstract While methane is the second largest contributor to global warming after carbon dioxide, it has a larger warming effect over a much shorter lifetime. Despite accelerated technological efforts to radically reduce global carbon dioxide emissions, rapid reductions in methane emissions are needed to limit near-term warming. Being primarily emitted as a byproduct from agricultural activities and energy extraction, methane is currently monitored via bottom–up (i.e. activity level) or top–down (via airborne or satellite retrievals) approaches. However, significant methane leaks remain undetected and emission rates are challenging to characterize with current monitoring frameworks. In this paper, we study the design of a layered monitoring approach that combines bottom–up and top–down approaches as an integrated sensing network. By recognizing that varying meteorological conditions and emission rates impact the efficacy of bottom–up monitoring, we develop a probabilistic approach to optimal sensor placement in its bottom–up network. Subsequently, we derive an inverse Bayesian framework to quantify the improvement that a design-optimized integrated framework has on emission-rate quantifications and their uncertainties. We find that under realistic meteorological conditions, the overall error in estimating the true emission rates is approximately 1.3 times higher, with their uncertainties being approximately 2.4 times higher, when using a randomized network over an optimized network, highlighting the importance of optimizing the design of integrated methane sensing networks. Further, we find that optimized networks can improve scenario coverage fractions by more than a factor of 2 over experimentally-studied networks, and identify a budget threshold beyond which the rate of optimized-network coverage improvement exhibits diminishing returns, suggesting that strategic sensor placement is also crucial for maximizing network efficiency.

54 ENVIRONMENTAL SCIENCES↗

BayesMT: A Probabilistic Bayesian Framework for the Seismic Moment Tensor

Moment tensors (MTs) have long been used in earthquake and explosion source analysis, and there has been a renewed interest in how they can inform us about the seismic source, particularly in the geophysical monitoring community due to its application in event identification and yield analysis. However, parameter uncertainties in seismic MT inversion are rarely available. The inverse procedure often does not quantify MT model errors such as event location, data noise and Earth model that are essential for estimating solution robustness. To address this need, we propose to adopt the Bayesian probabilistic framework to incorporate uncertainties in MT inversions. In this study, we present the theoretical background of a probabilistic Bayesian framework for MT inversion accounting for model and measurements errors and illustrate the implementation of the method using a synthetic example.

58 GEOSCIENCES↗

Mars Surveyor '98 Landers MVACS Robotic Arm Control System Design Concepts

This paper describes the control system design concepts for the Mars Volatiles and Climate Surveyor (MVACS) Robotic Arm which supports the scientific investigations to be conducted as part of the Mars Surveyor '98 Lander project. Solutions are presented to some of the problems encountered in this demanding space application with its tight constraints on mass, power, volume, and computing resources. Problems addressed include 4-DOF forward and inverse kinematics, trajectory planning to minimize potential impact damage, joint drive train protection, Lander tilt prevention, hardware fault monitoring, and collision avoidance.

Bonitz, Robert G.↗

Quantifying the benefits of improved satellite remote-sensing observations for inverse modeling of NOx and NMVOC emissions

This study aims to demonstrate the benefits of using novel high spatiotemporal retrieval products from newer satellites for top-down emission estimates of nitrogen oxides (NO x ) and non-methane volatile organic compounds (NMVOCs) for the summer of 2019 over the contiguous United States. Recent satellite retrievals have not only advanced spatiotemporal resolution but also greatly reduced error and uncertainty due to reduced noise in the retrievals compared to spaceborne sensors launched in the past. We applied inverse modeling techniques using tropospheric nitrogen dioxide (NO 2 ) and formaldehyde (H-CHO) column retrieval products from the Ozone Monitoring Instrument (OMI) and TROPOspheric Monitoring Instrument (TROPOMI) in conjunction with the Weather Research Forecast and Community Multiscale Air Quality Modeling system (WRF-CMAQ). In order to provide a better representation of background chemical composition and avoid misalignment of emission adjustment, we applied monthly scaling factors for ozone (O 3 ) and CO boundary concentrations in addition to the inclusion of lightning and aviation emissions. Satellite-constrained NO x and NMVOCs posterior emissions showed a mitigated discrepancy between observed and modeled columns. The improvement in the model performance was greater when using TROPOMI, primarily benefiting from reduced errors/biases of the satellite retrievals that enabled us to explore corresponding changes in O 3 concentrations and production sensitivity regimes using the ratio of H-CHO and NO 2 .

remote sensing↗

Maximum Likelihood Spectrum Decomposition for Isotope Identification and Quantification

A spectral decomposition method has been implemented to identify and quantify isotopic source terms in high-resolution gamma-ray spectroscopy in static geometry and shielding scenarios. Monte Carlo simulations were used to build the response matrix of a shielded high-purity germanium detector monitoring an effluent stream with a Marinelli configuration. The decomposition technique was applied to a series of calibration spectra taken with the detector using a multi-nuclide standard. These results are compared with decay-corrected values from the calibration certificate. For most nuclei in the standard ( 241 Am, 109 Cd, 137 Cs, and 60 Co), the deviations from the certificate values were generally no more than 6% with a few outliers as high as 10%. Furthermore, for 57 Co, the radionuclide with the lowest activity, the deviations from the standard reached as high as 25%, driven by the meager statistics in the calibration spectra. In addition, a complete treatment of error propagation for the technique is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Global Methane Budget 2000–2017

Understanding and quantifying the global methane (CH4) budget is important for assessing realistic pathways to mitigate climate change. Atmospheric emissions and concentrations of CH4 continue to increase, making CH4 the second most important human-influenced greenhouse gas in terms of climate forcing, after carbon dioxide (CO2). The relative importance of CH4 compared to CO2 depends on its shorter atmospheric lifetime, stronger warming potential, and variations in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in reducing uncertainties in the atmospheric growth rate arise from the variety of geographically overlapping CH4 sources and from the destruction of CH4 by short-lived hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to synthesize and stimulate new research aimed at improving and regularly updating the global methane budget. Following Saunois et al. (2016), we present here the second version of the living review paper dedicated to the decadal methane budget, integrating results of top-down studies (atmospheric observations within an atmospheric inverse-modelling framework) and bottom-up estimates (including process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations). For the 2008–2017 decade, global methane emissions are estimated by atmospheric inversions (a top-down approach) to be 576 Tg CH4/yr (range 550–594, corresponding to the minimum and maximum estimates of the model ensemble). Of this total, 359 Tg CH4/yr or ∼ 60 % is attributed to anthropogenic sources, that is emissions caused by direct human activity (i.e. anthropogenic emissions; range 336–376 Tg CH4/yr or 50 %–65 %). The mean annual total emission for the new decade (2008–2017) is 29 Tg CH4/yr larger than our estimate for the previous decade (2000–2009), and 24 Tg CH4/yr larger than the one reported in the previous budget for 2003–2012 (Saunois et al., 2016). Since 2012, global CH4 emissions have been tracking the warmest scenarios assessed by the Intergovernmental Panel on Climate Change. Bottom-up methods suggest almost 30 % larger global emissions (737 Tg CH4/yr, range 594–881) than top-down inversion methods. Indeed, bottom-up estimates for natural sources such as natural wetlands, other inland water systems, and geological sources are higher than top-down estimates. The atmospheric constraints on the top-down budget suggest that at least some of these bottom-up emissions are overestimated. The latitudinal distribution of atmospheric observation-based emissions indicates a predominance of tropical emissions (∼ 65 % of the global budget, < 30° N) compared to mid-latitudes (∼ 30 %, 30–60° N) and high northern latitudes (∼ 4 %, 60–90° N). The most important source of uncertainty in the methane budget is attributable to natural emissions, especially those from wetlands and other inland waters. Some of our global source estimates are smaller than those in previously published budgets (Saunois et al., 2016; Kirschke et al., 2013). In particular wetland emissions are about 35 Tg CH4/yr lower due to improved partition wetlands and other inland waters. Emissions from geological sources and wild animals are also found to be smaller by 7 Tg CH4/yr by 8 Tg CH4/yr, respectively. However, the overall discrepancy between bottom-up and top-down estimates has been reduced by only 5 % compared to Saunois et al. (2016), due to a higher estimate of emissions from inland waters, highlighting the need for more detailed research on emissions factors. Priorities for improving the methane budget include (i) a global, high-resolution map of water-saturated soils and inundated areas emitting methane based on a robust classification of different types of emitting habitats; (ii) further development of process-based models for inland-water emissions; (iii) intensification of methane observations at local scales (e.g., FLUXNET-CH4 measurements) and urban-scale monitoring to constrain bottom-up land surface models, and at regional scales (surface networks and satellites) to constrain atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) development of a 3D variational inversion system using isotopic and/or co-emitted species such as ethane to improve source partitioning.

methane budget↗

Development of a Fully Automated Guided Wave System for In-Process Cure Monitoring of CFRP Composite Laminates

A guided wave-based in-process cure monitoring technique for carbon fiber reinforced polymer (CFRP) composites was investigated at NASA Langley Research Center. A key cure transition point (vitrification) was identified and the degree of cure was monitored using metrics such as amplitude and time of arrival (TOA) of guided waves. Using an automated system preliminarily developed in this work, high-temperature piezoelectric transducers were utilized to interrogate a twenty-four ply unidirectional composite panel fabricated from Hexcel (Registered Trademark) IM7/8552 prepreg during cure. It was shown that the amplitude of the guided wave increased sharply around vitrification and the TOA curve possessed an inverse relationship with degree of cure. The work is a first step in demonstrating the feasibility of transitioning the technique to perform in-process cure monitoring in an autoclave, defect detection during cure, and ultimately a closed-loop process control to maximize composite part quality and consistency.

Hudson, Tyler B.↗

Advanced Inversion Algorithms for Scientific Data Analysis [Slides]

Accurate subsurface characterization is crucial for all subsurface energy exploration. Accurate characterization of uncertain subsurface properties is also critical for monitoring storage of CO 2 , estimating pathways of subsurface contaminant transport, and monitoring potential nuclear explosions for treaty verification. This research will advance our world-leading subsurface sensing capabilities that are crucial for LANL missions in energy security (geothermal energy, oil/gas resource exploration, geologic carbon storage) and nuclear security (facility monitoring, detonation detection).

47 OTHER INSTRUMENTATION↗

Recent Developments in Hydrogeologic Applications for Strain Tensor Analyses

Changes in fluid pressure deform porous media and this effect occurs in a variety of hydrogeologic processes, from the change in storage during pumping or injection to fluctuations in water levels caused by barometric pressure. We have developed instruments for measuring small strains in porous media, and we have used the resulting strain data to evaluate well testing, hydraulic fracturing, manual loading at the ground surface, and ambient hydrologic processes, like rainfall and evaporation. A particularly important application is the use of strain tensor data measured at shallow depths to analyze well tests or hydraulic fractures conducted at much greater depths. An early demonstration of this technique was conducted at the North Avant Field north of Tulsa, Oklahoma, where Pennsylvanian sandstone creates a confined aquifer and oil reservoir at a depth of 530m. We have showed that the strains caused by injecting into the aquifer could be measured at a depth of 30m and used to evaluate the properties of the aquifer. We recently expanded the array of strainmeters at the North Avant Field by deploying three more instruments at shallow depth (30m) along with a deep instrument at 520m depth in the winter, 2021. The deep instrument is deployed in shale caprock slightly above the aquifer. To our knowledge, the deep strainmeter at the North Avant Field is the deepest strainmeter ever deployed and this required refining methods originally developed for shallow deployments. The instrument was lowered to depth on oil field tubing and cemented in place using techniques and materials developed for use in oil wells. Optical fiber used to communicate with the instrument was cemented in the annulus on the outside of tubing. This is significant because the techniques we used could readily be extended to greater depth, suggesting that strainmeters can be deployed over a wide range of depths for monitoring critical subsurface processes. For example, it suggests that strainmeters could be deployed through the caprock to monitor for leaks from underlying CO2 storage reservoirs. The strainmeter array at the North Avant Field has been used to characterize deformation during a series of injection tests in the spring and summer, 2021. All the new strainmeters respond to pumping, and the strainmeters we installed earlier also responded. To our knowledge, this is the first application of well testing in a deep aquifer that was monitored by an array of strainmeters—our earlier work used strainmeters at a single location. We are currently analyzing the strain data using an analytical solution, a proxy-based Bayesian inversion algorithm, and other methods. Strainmeter data has also been used to characterize periodic pumping tests by us and Riley Blais. A periodically varying pumping rate causes both hydraulic head and strain signals that vary with the same period as the pumping. The peaks and troughs of the head in monitoring wells lag behind the peaks and troughs of the head in the pumping well, and this lag time increases with distance from the pumping well. The lag time of the pressure and the distance to the monitoring well can be used in a simple analysis to estimate the hydraulic diffusivity of the aquifer. The lag time determined from strain data can be used to estimate aquifer properties using the same analysis that works for the pressure only for strain data measured at particular locations. That is because the strain field in a confining unit advances upward, laterally and then downward even though the pressure in the underlying aquifer only advances laterally, according to our recent simulations. We have field data showing that a small periodic signal superimposed on an injection rate at the North Avant Field will create a periodic strain signal at shallow strainmeters. The field data and the recent simulations suggest that including a periodic component to injection or pumping and then monitoring the resulting strain signal could be a way to monitor the subsurface.

Murdoch, Larry↗