Search NASA⌕ Search

SEARCH · Search NASA

Results for “iridium catalysts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Carbon Nanospheres Loaded with Ir Single Atoms: Enhancing the Activity toward Formic Acid Oxidation by Increasing the Porosity

Theoretically, single-atom catalysts (SACs) offer 100 % atom utilization, making them strong candidates to replace expensive nanoparticles for catalysis. However, the structural supports used to anchor the SACs dramatically reduce the utilization efficiency of atoms ( i. e ., the percent of atoms actually accessible by reactants) by either encapsulating the SACs completely or creating severe diffusion limitation. Either of which leads to an overall low atom utilization and thus poor electrocatalytic activity similar to that of nanoparticles. In addressing this issue, we systematically investigated how the porous structure of carbon nanospheres affects the activity of Ir-SACs toward formic acid oxidation (FAO). Specifically, we utilized a kinetically-controlled growth strategy to produce uniform carbon nanospheres featuring yolk-shell, mesoporous, and hollow structures with Ir-SACs loaded throughout the structure. At a high specific surface area of 441 m 2 g -1 and exposed metal content of 1.82 wt %, the Ir-SACs based on mesoporous carbon nanospheres showed a remarkable FAO peak current density of 30.6 mA cm -2 , which was 283 and 46 times greater when benchmarked against the catalysts based on solid carbon nanospheres and 20 wt % Ir/C, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Development of High Capacity Energy Storage Materials

Hydrogen fuel cells have the potential to offer energy and power density advantages over lithium ion batteries in automotive and portable power applications when paired with an appropriate hydrogen storage system. Development of the ideal hydrogen storage material has been immensely sought after but plagued by limitations present in each type of material. These limitations typically include nonidealistic operational temperatures, low capacities, excessive costs, lack of reversibility, or evolution of impurities which irreversibly damage fuel cell performance. Many complex metal hydrides possess suitable hydrogen capacities but unfortunately suffer from impurity release. In order to address this problem, our team has explored in-situ catalyst doping of alkali metal amides to demonstrate methodologies to reduce ammonia release. The incorporation of iridium metal in lithium amide significantly reduces the ammonia release and decomposes the ammonia to provide additional hydrogen. Furthermore, we demonstrate, for the first time, high resistance of low temperature fuel cells to ammonia in comparison with typical proton exchange membrane fuel cells. The utilization of these two approaches in tandem provides a novel pathway for the development and implementation of high capacity energy storage materials for fuel cell applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Perovskite-Type Solid Solution Nano-Electrocatalysts Enable Simultaneously Enhanced Activity and Stability for Oxygen Evolution

A trade-off between catalytic activity and structural stability generally exists in oxygen evolution electrocatalysis, especially in acidic environment. This dilemma limits the development of higher-performance electrocatalysts that are required by next-generation electrochemical technologies. In this work it is demonstrated that the inverse catalytic activity–structural stability relation can be broken by alloying catalytically inert strontium zirconate with the other catalytically active perovskite, strontium iridate. This strategy results in an alloyed perovskite electrocatalyst with simultaneously improved iridium mass activity and structural stability, by about five times, for the oxygen evolution reaction under acidic conditions. The experimental and theoretical results suggest that the alloying strategy generates multiple positive effects, mainly including the reduction of catalyst size, the decrease of catalyst covalency, and the weakening of surface oxygen-binding ability. The synergistic optimization of bulk and surface properties, as a result, enhances the intrinsic activity and availability of surface iridium sites, whilst significantly inhibiting the surface cation corrosion during electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electrolyzer Performance Loss from Accelerated Stress Tests and Corresponding Changes to Catalyst Layers and Interfaces

Stress tests are developed for proton exchange membrane electrolyzers that utilize low catalyst loading, elevated potential, and frequent cycling with square- and triangle-waves to accelerate anode catalyst layer degradation during intermittent operation. Kinetics drive performance losses (ohmic/transport secondary) and are accompanied by decreasing exchange current density, decreasing cyclic voltammetric capacitance, and increasing polarization resistance. Decreased kinetics are likely due to a combination of iridium (Ir) migration into electrochemically inaccessible locations in the anode or membrane, Ir particle growth (supported by X-ray scattering), changes in the extent of the Ir oxidation state (supported by X-ray absorption spectroscopy), and anode catalyst layer reordering. Decreasing catalyst/transport layer contact and catalyst/membrane interfacial tearing may add contact resistances and account for increasing ohmic losses. Performance losses for low and moderate catalyst loading, as well as from accelerated and model wind/solar cycling protocols, were likewise dominated by kinetics but vary in severity. Additionally, accelerated cycling (1 cycle per minute) appears to reasonably accelerate relevant loss mechanisms and can be used to project electrolyzer lifetime from anode deterioration. Ongoing accelerated stress test development and studies into performance loss mechanisms will continue to be critical as electrolysis shifts to intermittent power and low-cost applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Aging gracefully? Investigating iridium oxide ink's impact on microstructure, catalyst/ionomer interface, and PEMWE performance

Here, in this study, we conducted a thorough investigation of the impact of aging iridium oxide (IrO 2 ) perfluorosulfonic acid ionomer ink for up to 14 days on the properties of the ink and the resulting catalyst layers. We examined ink properties, such as zeta potential, dynamic light scattering (DLS), density, surface tension, and rheology, as functions of ink aging time. To evaluate the microstructure and catalyst/ionomer interface, we employed transmission electron microscopy (TEM), X-ray scattering, and X-ray photoelectron spectroscopy (XPS) techniques. Furthermore, we assessed the effect of ink aging on the performance of proton exchange membrane water electrolyzers (PEMWEs). Our findings reveal that most ink properties remain stable for 14 days. The variations in PEMWE cell performance are minimal, and no clear trend is observed in relation to ink aging time. This study demonstrates that the effects of aging the inks for 14 days on ink properties, catalyst layer structure, catalyst/ionomer interface, and PEMWE performance are negligible, indicating a substantial time window after ink preparation without any significant changes in its properties. These insights provide crucial guidance for the commercial production and coating processes of ink, which is necessary for scaling up PEM technologies to meet future demand.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Supported Metal Pair-Site Catalysts

Complexes with neighboring metal centers in isolated pairs and their analogues on surfaces are drawing increasing attention as catalysts. These include molecular homogeneous catalysts incorporating various ligands, enzymes, and solids that include pairs of metal atoms mounted on supports. Catalysts in this broad class are active for numerous reactions and offer unexplored opportunities to address challenging reactions, such as oxidation of methane and oxidation of water in artificial photosynthesis. The subject of supported metal pair-site catalysts is in its infancy, facing challenges in (a) precise synthesis, (b) structure determination at the atomic scale, and (c) stabilization in reactive atmospheres. In this Perspective, we summarize key characteristics of molecular and enzymatic catalysts that incorporate neighboring metal centers and build on this foundation to assess the emerging literature of metal pair-site catalysts on various supports. The supported catalysts include those synthesized by anchoring molecular dinuclear precursors to support surfaces and those synthesized by selective formation of dinuclear surface species from mononuclear surface species. Examples of metals in this class are rhodium and iridium, and examples of supports are MgO and Fe 2 O 3 . We summarize characterization of these materials by electron microscopy and spectroscopy, emphasizing atomic-resolution aberration-corrected scanning transmission electron microscopy and spectroscopies that provide atomic-scale structural information and allow characterization of functioning catalysts, especially X-ray absorption spectroscopy. Finally, we list some opportunities for research, including suggestions that might lead to structurally well-defined supported metal pair-sites with new catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Discovery and characterization of an acridine radical photoreductant

Not provided.Photoinduced electron transfer (PET) is a phenomenon whereby the absorption of light by a chemical species provides an energetic driving force for an electron-transfer reaction. This mechanism is relevant in many areas of chemistry, including the study of natural and artificial photosynthesis, photovoltaics and photosensitive materials. In recent years, research in the area of photoredox catalysis has enabled the use of PET for the catalytic generation of both neutral and charged organic free-radical species. These technologies have enabled previously inaccessible chemical transformations and have been widely used in both academic and industrial settings. Such reactions are often catalysed by visible-light-absorbing organic molecules or transition-metal complexes of ruthenium, iridium, chromium or copper. Although various closed-shell organic molecules have been shown to behave as competent electron-transfer catalysts in photoredox reactions, there are only limited reports of PET reactions involving neutral organic radicals as excited-state donors or acceptors. This is unsurprising because the lifetimes of doublet excited states of neutral organic radicals are typically several orders of magnitude shorter than the singlet lifetimes of known transition-metal photoredox catalysts. Here we document the discovery, characterization and reactivity of a neutral acridine radical with a maximum excited-state oxidation potential of -3.36 volts versus a saturated calomel electrode, which is similarly reducing to elemental lithium, making this radical one of the most potent chemical reductants reported. Spectroscopic, computational and chemical studies indicate that the formation of a twisted intramolecular charge-transfer species enables the population of higher-energy doublet excited states, leading to the observed potent photoreducing behaviour. Finally, we demonstrate that this catalytically generated PET catalyst facilitates several chemical reactions that typically require alkali metal reductants and can be used in other organic transformations that require dissolving metal reductants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗
DOE OSTI2023

Multielectrode electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

A multielectrode-based electrochemical cell allows the structural characterization of an amorphous thin-film water oxidation catalyst under various electrochemical potentials using high-energy X-ray scattering and atomic pair distribution function (PDF) techniques. A multielectrode with five electrodes provides a sufficiently low background signal to enable high-energy X-ray scattering (HEXS) measurements and amplifies the extremely low HEXS signals from samples for high-resolution PDF analysis of in situ data from thin-film catalysts. Glassy carbon (GC) creates a relatively low intensity HEXS pattern and is used as a working electrode. Instead of a three-dimensional (3D) porous electrode architecture, the flat geometry of the electrode enables various deposition techniques to be used for the preparation of a highly conductive metal oxide layer. PDF analysis demonstrates high spatial resolution for a 230 nm thick amorphous iridium oxide film deposited on two roughened 60 µm thick GC electrodes. The PDF analysis resolves the domain size and distinguishes changes in fine structure which are directly correlated with the structure and function of the catalysts. In conclusion, the results bring the opportunity to analyze the structure of nanometre-scale amorphous thin-film catalysts in an electrolyte-compatible and compact 3D-printed electrochemical cell in a three-electrode configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Materials Engineering for High Performance and Durability Proton Exchange Membrane Water Electrolyzers

Proton exchange membrane water electrolyzers (PEMWEs) are expected to play a crucial role in the global green energy transition during the 21st century. They provide a versatile and sustainable solution for generating hydrogen with very high purity in combination with renewable energies, such as solar and wind. Despite their promise, PEMWEs face several critical problems, including high costs, performance limitations, and durability challenges, particularly at low iridium (Ir) loading on the anode. Advancing next-generation PEMWEs requires extensive work on materials engineering of all cell components, including the catalyst layer (CL), membrane, porous transport layer (PTL), bipolar plate (BPP), and gasket. This task must be performed with the complementary contribution of different modeling and characterization techniques. This review presents a critical perspective from academia, research centers, and industry, mapping main developments, remaining gaps, and strategic pathways to advance PEMWE technology. A focus is devoted to key aspects, such as operation at low Ir loading, membrane durability, multiscale transport layers, porous and non-porous flow fields, multiphysics modeling, and multipurpose characterization techniques, which are thoroughly discussed. By unifying these topics, this review provides readers with the essential knowledge to grasp current developments and tackle tomorrow's challenges in PEMWE engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoporous Iridium Nanosheets for Polymer Electrolyte Membrane Electrolysis

The growth of the hydrogen economy is predicated on advancements in electrochemical energy technologies, with water electrolysis as a key component to the technological portfolio. Much of the focus on anode catalyst development for polymer electrolyte membrane water electrolyzers (PEMWE) is centered on activity as controlled by compositional and morphological impacts on reactant/intermediate/product adsorption. However, the effectiveness of this strategy is found to be limited upon integration of these materials into PEMWE membrane electrode assemblies (MEA). Regardless of catalyst activity, the combination of electrode inhomogeneity, ionomer integration, and high density of oxide-oxide interfaces yields significant performance losses associated with poor catalytic electrode conductivity. Here many of these limitations are addressed through the development of a unique catalyst morphology composed of nanoporous Ir nanosheets (npIr(x)-NS) that exhibit high catalytic activity for the anodic oxygen evolution reaction and superior electrode electronic conductivity in comparison to a commercial IrO2 nanoparticle catalyst. The utility of the npIr(x)-NS is demonstrated through incorporation into PEMWE MEAs where their performance exceeds that of commercial catalyst coated membranes at loadings as low as 0.06 mg(Ir) cm(-2) while exhibiting a negligible loss in performance following 50 000 accelerated stress test cycles.

Polymer Electrolyte Membrane Electrolysis↗
DOE OSTI2025

Iridium Nanocrystals Enriched with Defects and Atomic Steps to Enhance Oxygen Evolution Reaction Performance

The presence of defects can significantly improve catalytic activity and stability, as they influence the binding of the reactants, intermediates, and products to the catalyst. Controlling defects in the structures of nanocrystal catalysts is synthetically challenging. In this study, we demonstrate the ability to control the growth of Ir nanocrystals, enabling the tuning of both structural and surface defects. The Ir nanocrystals have unique structures that range from single crystals of a few nanometers to twinned nanoparticles and multiply twinned crystallites with a high density of atomic steps. Further, this approach of defect engineering enables us to understand their roles in enhancing the performance of the OER and producing an Ir catalyst with both high activity and stability. Our results show the importance of the concept of using synthetic control of structural and surface defects in metal nanoparticles as a strategy to improve catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

SABRE Ir-IMes Catalysis for the Masses

The Signal Amplification By Reversible Exchange (SABRE) technique provides enhancement of Nuclear Magnetic Resonance (NMR) signals up to several orders of magnitude using chemical exchange of a substrate and parahydrogen on an iridium complex. Therefore, the availability of such a catalytic complex to a broader community is an absolutely vital step for dissemination of the groundbreaking SABRE methodology. The most common SABRE catalyst, which is activated in situ, is based on Ir-IMes system (IMes = 1,3-Bis(2,4,6-trimethylphenyl)imidazol-2-ylidene). Earlier approaches for the synthesis of this catalyst often relied on specialized equipment and were limited to a comparatively small scale. This, in turn, increased the barrier of entry for new scientists to the area of SABRE hyperpolarization. Here, we present a robust, inexpensive, and easy to reproduce synthetic procedure for the preparation of this SABRE catalyst, which does not require specialized inert atmosphere equipment like a glove box or Schlenk line. The synthesis was validated on the scale of several grams vs. tens of milligrams scale in the reported approaches. The resulting SABRE catalyst, [Ir(IMes)(COD)Cl], was activated in situ and further evaluated in hyperpolarization experiments resulting in signal enhancements comparable to (or higher than) those for the catalyst prepared using Schlenk line equipment.

Biochemistry & Molecular Biology↗
DOE OSTI2022

Non-noble metal based electro-catalyst compositions for proton exchange membrane based water electrolysis and methods of making

The invention provides electro-catalyst compositions for an anode electrode of an acid mediated proton exchange membrane-based water electrolysis system. The compositions include a noble metal component selected from the group consisting of iridium oxide, ruthenium oxide, rhenium oxide and mixtures thereof, and a non-noble metal component selected from the group consisting of tantalum oxide, tin oxide, niobium oxide, titanium oxide, tungsten oxide, molybdenum oxide, yttrium oxide, scandium oxide, cooper oxide, zirconium oxide, nickel oxide and mixtures thereof. Further, the non-noble metal component can include a dopant. The dopant can be at least one element selected from Groups III, V, VI and VII of the Periodic Table. The compositions can be prepared using any solution based methods involving a surfactant approach or a sol gel approach. Further, the compositions are prepared using noble metal and non-noble metal precursors. Furthermore, a thin film containing the compositions can be deposited onto a substrate to form the anode electrode.

Kumta, Prashant N.↗
DOE OSTI2020

Polymer Entrapment Flash Pyrolysis for the Preparation of Nanoscale Iridium-Free Oxygen Evolution Electrocatalysts

This paper describes the use of a new polymer entrapment flash pyrolysis (PEFP) method for making nanoscale yttrium ruthenate (Y 2 Ru 2 O 7-δ ) electrocatalysts. Here, this approach effectively reduced the synthesis temperature of phase-pure pyrochlore catalysts from 1000 °C to 550 °C, and greatly suppressed the sintering of catalyst particles. The supported nanocrystalline Y 2 Ru 2 O 7-δ catalysts showed enhanced activity towards oxygen evolution reaction (OER) in acidic electrolyte and were stable at 1.50 V for the comparative study (>20 h) under the current density of 10 mA/cm 2 geo in chronopotentiometry testing. This is equivalent to an overpotential value of 270 mV, about half of that of the reference IrO 2 catalyst. X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) analysis showed that the high-surface-area Y 2 Ru 2 O 7-δ catalyst had an oxygen-deficient structure. This study provides a route to the synthesis of fine ceramic (or oxide)-based electrocatalysts for making high-performing electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Increasing Iridium Oxide Activity for the Oxygen Evolution Reaction with Hafnium Modification

Synthesis and implementation of highly active, stable, and affordable electrocatalysts for the oxygen evolution reaction (OER) is a major challenge in developing energy efficient and economically viable energy conversion devices such as electrolyzers, rechargeable metal-air batteries, and regenerative fuel cells. The current benchmark electrocatalyst for OER is based on iridium oxide (IrO x ) due to its superior performance and excellent stability. However, large scale applications using IrO x are impractical due to its low abundance and high cost. In this work, we report a highly active hafnium-modified iridium oxide (IrHf x O y ) electrocatalyst for OER. The IrHf x O y electrocatalyst demonstrated ten times higher activity in alkaline conditions (pH = 11) and four times higher activity in acid conditions (pH = 1) than a IrO x electrocatalyst. The highest intrinsic mass activity of the IrHf x O y catalyst in acid conditions was calculated as 6950 A gIrO x -1 at an overpotential (η) of 0.3 V. Combined studies utilizing operando surface enhanced Raman spectroscopy (SERS) and DFT calculations revealed that the active sites for OER are the Ir-O species for both IrO x and IrHf x O y catalysts. The presence of Hf sites leads to more negative charge states on nearby O sites, and shortening the bond lengths of Ir-O, and lowering free energies for OER intermediates to accelerate the OER process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗