Laser Spark Evolution in an Ethylene Jet in Supersonic Crossflow Configuration
Not provided.
Mechanics↗
SEARCH · Search NASA
Results for “jet in crossflow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Separated flow upstream of a jet in a crossflow
Explore the source record for details and available documents.
Krothapalli, A.↗
Liquid fuel jet in subsonic crossflow
Explore the source record for details and available documents.
Nguyen, T. T.↗
Evaluation of a Navier-Stokes prediction of a jet in a crossflow
Explore the source record for details and available documents.
Roth, Karlin R.↗
Breakup of a liquid jet in supersonic crossflow
Explore the source record for details and available documents.
Li, H.-S.↗
Correlation of secondary sonic and supersonic gaseous jet penetration into supersonic crossflows
Effect of injection Mach number on jet penetration over wide range of pressure and free stream Mach numbers
Povinelli, F. P.↗
CFD mixing analysis of axially opposed rows of jets injected into confined crossflow
A CFD parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. An isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing for the cases of: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls) configurations. For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum nonimpinging jet spacing. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5).
Bain, D. B.↗
Crossflow Mixing of Noncircular Jets
An experimental investigation has been conducted of the isothermal mixing of a turbulent jet injected perpendicular to a uniform crossflow through several different types of sharp-edged orifices. Jet penetration and mixing was studied using planar Mie scattering to measure time-averaged mixture fraction distributions of circular, square, elliptical, and rectangular orifices of equal geometric area injected into a constant velocity crossflow. Hot-wire anemometry was also used to measure streamwise turbulence intensity distributions at several downstream planes. Mixing effectiveness was determined using (1) a spatial unmixedness parameter based on the variance of the mean jet concentration distributions and (2) by direct comparison of the planar distributions of concentration and of turbulence intensity. No significant difference in mixing performance was observed for the six configurations based on comparison of the mean properties.
Liscinsky, D. S.↗
On the Mixing of Single and Opposed Rows of Jets With a Confined Crossflow
The primary objectives of this study were 1) to demonstrate that contour plots could be made using the data interface in the NASA GRC jet-in-crossflow (JIC) spreadsheet, and 2) to investigate the suitability of using superposition for the case of opposed rows of jets with their centerlines in-line. The current report is similar to NASA/TM-2005-213137 but the "basic" effects of a confined JIC that are shown in profile plots there are shown as contour plots in this report, and profile plots for opposed rows of aligned jets are presented here using both symmetry and superposition models. Although superposition was found to be suitable for most cases of opposed rows of jets with jet centerlines in-line, the calculation procedure in the JIC spreadsheet was not changed and it still uses the symmetry method for this case, as did all previous publications of the NASA empirical model.
Holdeman, James D.↗
Heat transfer characteristics for jet array impingement with initial crossflow
Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. In addition to the crossflow which originates from the jets following impingement, an initial crossflow is present which approaches the array through an upstream extension of the channel. The temperature of the initial crossflow air may differ from the jet air temperature. The configurations considered are intended to model the impingement cooled midchord region of gas turbine airfoils in cases where an initial crossflow is also present. Nusselt numbers and dimensionless adiabatic wall temperatures resolved to one streamwise jet hole spacing were experimentally determined for ratios of the initial crossflow rate to the total jet flow rate ranging from zero to unity. These are presented and discussed relative to the flow and geometric parameters.
Florschuetz, L. W.↗
CFD mixing analysis of axially opposed rows of jets injected into confined crossflow
A computational fluid dynamics (CFD) parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. Isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing. Two lateral arrangements were analyzed: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls). For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum non-impinging jet spacing. The inline configurations, due to their smaller orifice size at optimum S/H, produced better initial mixing characteristics. At downstream locations (e.g. x/H of 1.5), the optimum non-impinging staggered configuration produced better mixing than the optimum inline configuration for J of 64; the opposite results were observed for J of 16. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5).
Bain, D. B.↗
Properties of aspect-ratio-4.0 rectangular jets in a subsonic crossflow
A series of wind-tunnel and laboratory tests were conducted at the NASA Langley V/STOL tunnel facility to determine both the detailed structure and the induced effects of aspect-ratio-4.0 rectangular jets both in a subsonic crosswind and in quiescent conditions. Wind-tunnel tests were conducted on both blunt (nozzle major axis normal to free stream) and streamwise (nozzle major axis parallel to free stream) nozzle orientations for jet injection angles ranging from 15 to 90 degrees at jet-to-crossflow velocity ratios of 4, 8, and 10. Results indicate that the blunt nozzle induced effects are more significant than those produced by comparable streamwise-oriented jets and that both the flow-field structure and induced effects of streamwise-oriented rectangular jets are quite similar to those created by round jets. Additionally, it is shown that significant differences exist in the vortex flow fields generated by the same rectangular nozzle mounted in two different test hardware configurations.
Thames, F. C.↗
Improving NO x Entitlement with Axial Staging
Manufacturers are constantly under pressure to increase the efficiency of air breathing gas turbines for the next generation of ground based combined cycle power plants without a significant increase in NO x emissions. Axially staging some of the fuel and air is one method manufacturers are exploring to increase the firing temperature with a minimal NO x increase. This project used a high-pressure combustion facility to systematically explore the axial stage design space at conditions relevant to engine manufacturers. Chemiluminescence and PIV images of the reacting jets were obtained as well as exit emissions. This data was used to create correlations for reacting jets-in-crossflow, analogous to what currently exists for non-reacting jets-in-crossflow. Two CFD programs were used to model these results to quantifying the accuracy of the codes and help elucidate the underlying physics that governs the high-pressure reacting jet in crossflow. This report indicates a change in flame/flow-field behavior, and emissions characteristics with increasing pressure from 1-5.5 atm. Additionally, the effects of preheating and premixing the axial jet are explored at various conditions and show increased jet liftoff leads to a decrease in NO x emissions.
03 NATURAL GAS↗
Computer programs to predict induced effects of jets exhausting into a crossflow
A user's manual for two computer programs was developed to predict the induced effects of jets exhausting into a crossflow. Program JETPLT predicts pressures induced on an infinite flat plate by a jet exhausting at angles to the plate and Program JETBOD, in conjunction with a panel code, predicts pressures induced on a body of revolution by a jet exhausting normal to the surface. Both codes use a potential model of the jet and adjacent surface with empirical corrections for the viscous or nonpotential effects. This program manual contains a description of the use of both programs, instructions for preparation of input, descriptions of the output, limitations of the codes, and sample cases. In addition, procedures to extend both codes to include additional empirical correlations are described.
Perkins, S. C., Jr.↗
A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow
An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.
J D Holderman↗
A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow
An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.
J D Holderman↗
Effects of velocity profile and inclination on dual-jet-induced pressures on a flat plate in a crosswind
An experimental study was conducted to determine surface pressure distributions on a flat plate with dual subsonic, circular jets exhausting from the surface into a crossflow. The jets were arranged in both side-by-side and tandem configurations and were injected at 90 deg and 60 deg angles to the plate, with jet-to-crossflow velocity ratio of 2.2 and 4. The major objective of the study was to determine the effect of a nonuniform (vs uniform) jet velocity profile, simulating the exhaust of a turbo-fan engine. Nonuniform jets with a high-velocity outer annulus and a low-velocity core induced stronger negative pressure fields than uniform jets with the same mass flow rate. However, nondimensional lift losses (lift loss/jet thrust lift) due to such nonuniform jets were lower than lift losses due to uniform jets. Changing the injection angle from 90 deg to 60 deg resulted in moderate (for tandem jets) to significant (for side-by-side jets) increases in the induced negative pressures, even though the surface area influenced by the jets tended to reduce as the angle decreased. Jets arranged in the side-by-side configuration led to significant jet-induced lift losses exceeding, in some cases, lift losses reported for single jets.
Jakubowski, A. L.↗
Perspectives on the mixing of a row of jets with a confined crossflow
An interactive computer code, written for a microcomputer, is presented which displays 2-D and 3-D oblique plots of the temperature distribution downstream of jets mixing with a confined crossflow, for either single-side or opposed jet injection. Temperature profiles calculated with this routine are presented to show the effects of flow and geometric variables on the mixing. Examples are shown to illustrate the different perspectives on the mixing available by exercising various view options. In addition, the program is used to calculate profiles for opposed rows of jets with their centerlines in-line, by assuming that the confining effect of an opposite wall is equivalent to that of a plane of symmetry between opposed jets.
Holdeman, J. D.↗