Search NASA⌕ Search

SEARCH · Search NASA

Results for “landscape scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The Need for Urban‐Resolving Climate Modeling Across Scales

Abstract Increasing urbanization, evolving urban landscapes, and growing populations require an accurate representation of urban areas and urban processes at microscale, regional, and global scales and their feedback across the scales. Important urban processes should be represented in climate models, and current approaches used are discussed. We discuss strategies for urban‐resolving climate research to capture the effect of climate on urban regions and the non‐linear urban processes on climate. Advancing urban‐resolving climate modeling will take us closer to capabilities that can truly capture relevant natural and human components.

Sharma, Ashish↗

Topographical shifts in fine root lifespan in a mixed, mesic temperate forest

Root lifespan, often is estimated in landscape- and ecosystem-level carbon models using linear approximations. In water manipulation experiments, fine root lifespan can vary with soil water content. Soil water content is generally structured by complex topography, which is largely unaccounted for in landscape- and ecosystem-scale carbon models. Topography governs the range of soil water content experienced by roots which may impact their lifespan. We hypothesized that root lifespan varied nonlinearly across a temperate, mesic, forested catchment due to differences in soil water content associated with topographic position. We expected regions of the landscape that were too wet or too dry would have soils that were not optimal for roots and thus result in shorter root lifespans. Specifically, we hypothesized that root lifespan would be longest in areas that consistently had soil water content in the middle of the soil water content spectrum, while in soils at either very low or very high soil water content, root lifespan would be relatively short. We tested this hypothesis by collecting and analyzing two years of minirhizotron and soil moisture data in plots widely distributed in the Shale Hills catchment of the Susquehanna-Shale Hills Critical Zone Observatory in Pennsylvania. We found that fine root lifespans were longer in traditionally wetter topographic regions, but detected no short term (biweekly) effect of soil moisture on root lifespan. Additionally, depth in soil, soil series, slope face orientation, and season of birth strongly affected root lifespans across the catchment. In contrast, lifespan was unaffected by root diameter or mycorrhizal association. Failure to account for these variables could result in erroneous estimates of fine root lifespan and, consequentially, carbon flux in temperate forested regions.

54 ENVIRONMENTAL SCIENCES↗

Quantifying Turbine-Level Risk to Golden Eagles Using a High-Fidelity Updraft Model and a Stochastic Behavioral Model

To minimize the effects of wind farms on Golden Eagle (Aquila chrysaetos) populations while enabling sustainable development of renewable energy resources, it is important to understand how eagles interact with atmospheric flows, terrain features, and anthropogenic structures. Models that predict migratory flight paths provide one tool that helps us grasp how the location of wind farms may influence interactions and impacts on migrating Golden Eagles. The current state-of-the-art in predicting migratory flight paths uses a deterministic fluid-flow analogy to predict eagle trajectory using only an orographic updraft potential computed from topographical features. This model does not take into account variables, such as thermal updrafts and time varying atmospheric conditions that are known to influence migratory behavior. In this work, we improve on the model with the objective of developing tools that advance our understanding of how atmospheric flows and terrain features affect migratory eagle behavior and their interactions with wind farms. Specifically, we 1) incorporate both orographic and thermal updraft information in simulating eagle flight paths; 2) incorporate stochasticity into eagle travel patterns to better capture the influence of exogenous factors on, and the inherent stochasticity of eagle behavior; 3) consider spatio-temporal atmospheric data at wind-farm-scale when computing updraft potential; and 4) account for how atmospheric conditions and the direction of migration change seasonally and how these changes affect eagle migratory flight behavior. We tested the model using a 50km by 50km region with 50 m resolution in the western United States. We simulated 900 independent, probabilistic eagle tracks during southerly and northerly migration, assuming eagles solely rely on orographic updrafts. The preliminary results indicate that the inclusion of finer resolution atmospheric data allows for the inclusion of realistic conditions that an eagle experiences. The stochasticity in eagle tracks provides a platform to include uncertainty in eagle decision making and help produce robust eagle presence maps. We will deploy updraft and downdraft velocities computed using a high-fidelity, wind farm scale, computational fluid dynamics solver under development at National Renewable Energy Laboratory. This work is a first step in the development of a predictive and generalizable eagle behavior model at the wind farm scale that does not rely on empirical data collection. Although the current model is intended for migratory eagles, we will extend and refine this model to inform the development of additional behavioral modes, including resident eagle behavior. This modeling approach improves our ability to understand eagle use of the landscape at a fine scale, and it is our hope that this work will ultimately help advance strategies that minimize the impact of wind development on Golden Eagle populations.

49 EE - Wind and Water Power Program - Wind (EE-4W↗

Applying cumulative effects to strategically advance large-scale ecosystem restoration

Programs restoring large terrestrial-aquatic ecosystems are expected to increase in area and number over the next decade. Factors ensuring long-term effectiveness at the program scale differ from those at the individual restoration project scale, necessitating a new synthesis. Here we contextualize hydrological, geomorphological, and biological effects of large-scale ecosystem restoration activities within a cumulative-effects paradigm. Evidence of eight modes of cumulative effects benefiting species and ecosystems was elucidated by reviewing restoration efforts in the greater Florida Everglades, Gulf Coast, lower Columbia River and estuary, Puget Sound estuary, Missouri River, northeastern coastal states, San Francisco Bay and Sacramento Delta. Additive and nonlinear cumulative effects of interacting restoration projects propagated across landscape and regional geographic scales, and throughout trophic levels, affecting population structures. Applying a cumulative-effects paradigm to planning, implementing, and evaluating large-scale restoration will avoid countervailing effects and capitalize on positive feedback, advancing evidence-based programs to recover priority species and ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Landscape rules predict optimal superhighways for the first peopling of Sahul

Archaeological data and demographic modelling suggest that the peopling of Sahul required substantial populations, occurred rapidly within a few thousand years and encompassed environments ranging from hyper-arid deserts to temperate uplands and tropical rainforests. How this migration occurred and how humans responded to the physical environments they encountered have, however, remained largely speculative. By constructing a high-resolution digital elevation model for Sahul and coupling it with fine-scale viewshed analysis of landscape prominence, least-cost pedestrian travel modelling and high-performance computing, here we create over 125 billion potential migratory pathways, whereby the most parsimonious routes traversed emerge. Our analysis revealed several major pathways—superhighways—transecting the continent, that we evaluated using archaeological data. These results suggest that the earliest Australian ancestors adopted a set of fundamental rules shaped by physiological capacity, attraction to visually prominent landscape features and freshwater distribution to maximize survival, even without previous experience of the landscapes they encountered.

54 ENVIRONMENTAL SCIENCES↗

Multi-resolution Arctic Shrub Cover Dataset Derived from UAS and Airborne SfM and LiDAR (2013-2025)

We synthesized 177 unoccupied aerial system flights and 77 airborne flights across the Arctic and created a multi-resolution benchmark data of low-to-tall shrub fractional cover leveraging Structure-from-Motion and Light Detection and Ranging. The resulting dataset covered a total of 1899 km2 across Alaska, Western Canada, Sweden, and Siberian Arctic, including key sites from the Oro Arctic to the High Arctic. The dataset is organized into 6 primary data collection directories (“Abisko,” “AWI,” “ERE,” “Fairbanks,” “NGEE,” “Toolik”), each containing site and flight subdirectories. Flight directories include shrub cover rasters (*.tifs) at 1 m, 5 m, and 30 m resolution, the canopy height model at 1 m resolution (*.tifs), and a bounding box *.kml file. For the AWI, Abisko, NGEE, and Fairbanks collections, we also include the GCC raster at 1 m resolution (*.tif). Files are organized by Collection > Site > Flight Name > Data Files. Flight rasters are in the local UTM zone and the .kml files are in the geographic coordinate system EPSG 4326. We also include a .csv file that details the source datasets for every flight. The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research. Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

canopy height model↗

How initial conditions-, structural-, and parameter-based model uncertainty interact and influence predictions in permafrost ecosystems: Modeling Archive

This dataset contains model output and input data, as well as source code examples for the Terrestrial Ecosystem Model with the Dynamic Vegetation Model and Dynamic Organic Soil (DVM-DOS-TEM) for the field sites Imnavait creek and the Bonanza creek Long Term Ecological Research Network (LTER). The data covers simulations from the last glacial maximum (LGM) until 2100 for a selection of paleo scenarios, setting the mean temperature of the LGM up to 10°C lower than pre-industrial conditions. The model structure was modulated to represent various model versions, and this dataset contains the relevant changes in the source code. The raw output data, the processed statistical data, the setup and processing scripts as well as parameter value distribution files from a parameter sensitivity analysis are included as well. Model outputs include active layer depth, organic soil carbon, soil layer depths, gross primary productivity (GPP) with and without nitrogen limitation, net primary productivity (NPP), soil liquid water content, heterotrophic, maintenance, and growth respiration, soil temperature, and vegetation carbon (*.nc files). The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research.Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

54 ENVIRONMENTAL SCIENCES↗

Evaluating the potential for bird‐habitat models to support biodiversity‐friendly urban planning

Abstract Urban expansion poses a major threat to wildlife populations. Biodiversity‐friendly urban landscapes could deliver benefits for both wildlife and people, by incorporating conservation and ecosystem services objectives. Well‐designed urban developments could also soften the ecological impacts of urbanization. However, delivering urban landscapes that integrate biodiversity requirements effectively remains challenging. Ecological models, designed to predict wildlife population responses to alternative urban designs, could prove effective in supporting the creation of biodiversity‐friendly urban landscapes. Here, we combine national‐scale bird abundance data with high resolution, spatially explicit habitat data to characterize relationships between bird densities and urban landscape form in Britain. From these analyses and cross validation, we evaluate the potential for well‐parameterized, species‐specific models to be used to predict bird densities in novel or modified urban areas. Our analyses indicate that responses of bird abundance to urban habitat are species‐specific and complex, with few variables consistently affecting a large proportion of species. However, contiguous areas of greenspace within urban sites are preferential for accommodating breeding birds, compared to a more fragmented arrangement of multiple, small greenspace patches. In combination, the bird‐habitat relationships identified could successfully predict observed variation in abundance for most bird species considered. Further evaluation of habitat descriptor variables, spatial scales of species' habitat use and analytical modelling approaches may be needed to improve the predictive ability of bird‐habitat models for certain species, particularly waterbirds and those observed less frequently in urban areas. Synthesis and applications . We modelled breeding bird abundance in built‐up areas with respect to the characteristics and contexts of urban environments. While most variables were important for multiple species, responses overall were species‐specific, so simple assemblage metrics, like diversity, will not describe the variation in bird communities well. However, the results illustrate the potential of an evidence‐based, spatially explicit evaluation of urban development impacts on biodiversity, by predicting the consequences for bird numbers. Subject to verification of predictive ability, practitioners can apply the models to compare, for example, land‐sparing and sharing within developments, or to quantify the biodiversity requirements for effective offsetting. This would be facilitated by incorporation into an online tool allowing user‐determined input scenarios.

Plummer, Kate E.↗

The underappreciated importance of solar radiation in constraining spring phenology of temperate ecosystems in the Northern and Eastern United States

Spring phenology of temperate ecosystems is highly sensitive to climate change, generating various impacts on many important terrestrial surface biophysical processes. Although various prognostic models relying on environmental variables of temperature and photoperiod have been developed for spring phenology, comprehensive ecosystem-scale evaluations over large landscapes and long-time periods remain lacking. Further, environmental variables other than temperature and photoperiod might also importantly constrain spring phenology modelling but remain under-investigation. To address these issues, we leveraged around 20-years datasets of environmental variables (from Daymet and GLDAS products) and the spring phenology metric (i.e., the greenup date) respectively derived from MODIS and PhenoCams across 108 sites in the Northern and Eastern United States. We firstly cross-compared MODIS-derived greenup date with official PhenoCams product with high accuracy (R 2 = 0.70). Then, we evaluated the three prognostic models (i.e., Growing Degree Date (GDD), Sequential (SEQ) and optimality-based (OPT)) with MODIS-derived spring phenology, assessed the model residuals and their associations with soil moisture, rainfall, and solar radiation, and revised the two photoperiod-relevant models (SEQ, OPT) by replacing the daylength variable with solar radiation, which was found to contribute the most to model residuals. We found that 1) all models demonstrated good capability in characterizing spring phenology, with OPT performing the best (RMSE = 8.04 ± 5.05 days), followed by SEQ (RMSE = 10.57 ± 7.77 days) and GDD (RMSE = 10.84 ± 8.42 days), 2) all models displayed high model residuals showing tight correlation with solar radiation (r = 0.45–0.75), and 3) the revised models that included solar radiation significantly performed better with an RMSE reduction by 22.08%. Such results are likely because solar radiation better constrains early growing season plant photosynthesis than photoperiod, supporting the hypothesis of spring phenology as an adaptive strategy to maximize photosynthetic carbon gain (approximated by solar radiation) while minimizing frost damage risk (captured by temperature). Collectively, our study here reveals the underappreciated importance of solar radiation in constraining spring phenology of temperate ecosystems, and suggests ways to improve spring phenology modelling and other phenology-related ecological processes.

54 ENVIRONMENTAL SCIENCES↗

Proposed Algorithm for Placement and Sizing of Generation and Storage Stations in Urban Environments

The placement of generation and storage stations (GSSs) in distribution grids has been extensively investigated. Most traditional methods are applicable to rural or homogeneous environments and do not account for external restrictions on generation placement in urban or semi-urban environments. In this article, we propose a method for generation placement considering externality constraints. New utility-scale generation in distribution grids potentially occupies footprint and interferes in areas with existing infrastructure with architectural, historical, or touristic value. Urban environments are often regulated by municipal legislation. The placement of utility-scale generation in urban landscapes is economically and physically restricted by such externalities, and existing methods for generation placement in distribution grids based on technical optimization fail to account for this important nuance. The proposed algorithm flexibly adapts to changes in government energy policies and priorities. The selection of the type of generation suitable for the power grid is left to the preference of external high-level stakeholders, such as urban planners, industry development leaders, and energy policymakers. The proposed algorithm is a unique tool for determining the placement and sizing of generation in realistic conditions in distribution grids; it is adaptable to urban externalities and sensitive to stakeholder preferences.

generation and storage station placement↗

Predicting Switchgrass Biomass Yields Using a Spectral Vegetation Index Derived from Multispectral Satellite Imagery

Successful scaling of perennial bioenergy crop production requires a landscape design that optimizes the benefits of finite lands for people, communities, and environments. Utilizing marginal areas is the key to sustainable bioenergy crop production (Ssegane et al., 2015, 2016). Marginal areas are often small-sized lands and unevenly distributed across the agricultural landscape (Ssegane et al., 2016); thus, a systematic, semi-automated remote sensing method is needed as an effective means of estimating bioenergy crop yields across landscapes. Argonne National Laboratory (Argonne) is currently developing a tool, Scaling Up Perennial Bioenergy Economics and Ecosystem Services Tool (SUPERBEEST), to identify marginal agricultural lands and quantify environmental and economic effects of perennial bioenergy crop production systems. The tool aims to provide users a path to foster the sustainable and productive integration of bioenergy crops in the Midwestern agricultural landscape. Reliable, cost-effective, and timely estimation of bioenergy crop yields using remote sensing would help calculate and track the success of integrated bioenergy crops in the landscape for those communities. Argonne previously conducted feasibility studies for estimating biomass yields for bioenergy feedstock, corn and perennial grass using spectral vegetation indices (SVIs)1 derived from optical imagery (Hamada et al., 2015, 2021). In both studies, SVIs, more specifically those sensitive to plant chlorophyll or nitrogen contents, showed potential for estimating or predicting biomass yields with a correlation of determination (R2) ranging from 0.54 to 0.96, indicating a value for further investigation as a viable means of quantifying bioenergy feedstock production across large landscapes. Thus, the goal of this study is to evaluate the feasibility of use of SVIs as a means of estimating or predicting switchgrass biomass yields at harvest using publicly available multispectral satellite imagery. The feasibility analysis was performed using four study areas of mature switchgrass located in Virginia. Objectives are to (1) examine the SVIs and establish their relationships with switchgrass biomass yields at harvest, (2) develop a parsimonious image processing model for predicting at-harvest yields by applying the relationships with the most promising spectral index and (3) map switchgrass yields predicted by the image processing model across the study sites. The calibration to field data will rely on switchgrass biomass yields determined by the baling method, representing a potential challenge to the analysis but an important practical aspect for future applications. With this research design, the study aimed to gain insights into enabling remote sensing-based estimation of bioenergy crop yields in a reliable, cost- effective, and timely manner across large, heterogeneous landscapes.

09 BIOMASS FUELS↗

SMEFT ATLAS: The landscape beyond the Standard Model

The Standard Model Effective Field Theory (SMEFT) based on the unbroken gauge group SU(3) 𝐶 ⊗SU(2) 𝐿 ⊗U(1) 𝑌 and containing only particles of the Standard Model (SM) has developed in the last decade to a mature field. It is the framework to be used in the energy gap from scales sufficiently higher than the electroweak scale up to the lowest energy scale at which new particles show up. We summarize the present status of this theory with a particular emphasize on its role in the indirect search for new physics (NP). While flavour physics of both quarks and leptons is the main topic of our review, we also discuss electric dipole moments, anomalous magnetic moments (𝑔−2) 𝜇,𝑒 , 𝑍-pole observables, Higgs observables and high-𝑝𝑇 scattering processes within the SMEFT. We group the observables into ten classes and list for each class the most relevant operators and the corresponding renormalization group equations (RGEs). We exhibit the correlations between different classes implied both by the operator mixing and the SU(2) 𝐿 gauge symmetry. Our main goal is to provide an insight into the complicated operator structure of this framework which hopefully will facilitate the identification of valid ultraviolet completions behind possible anomalies observed in future data. Numerous colourful charts, and 85 tables, while representing rather complicated RG evolution from the NP scale down to the electroweak scale, beautify the involved SMEFT landscape. Over 1000 references to the literature underline the importance and the popularity of this field. We discuss both top-down and bottom-up approaches as well as their interplay. This allows us eventually to present an atlas of different landscapes beyond the SM that includes heavy gauge bosons and scalars, vector-like quarks and leptons and leptoquarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

If you build it, will they come? Insect community responses to habitat establishment at solar energy facilities in Minnesota, USA

Abstract Global declines in insect populations have important implications for biodiversity and food security. To offset these declines, habitat restoration and enhancement in agricultural landscapes could mutually safeguard insect populations and their pollination services for crop production. The expansion of utility-scale solar energy development in agricultural landscapes presents an opportunity for the dual use of the land for energy production and biodiversity conservation through the establishment of grasses and forbs planted among and between the photovoltaic solar arrays (‘solar-pollinator habitat’). We conducted a longitudinal field study across 5 years (2018–2022) to understand how insect communities responded to newly established habitat on solar energy facilities in agricultural landscapes by evaluating (1) temporal changes in flowering plant abundance and diversity; (2) temporal changes in insect abundance and diversity; and (3) the pollination services of solar-pollinator habitat by comparing pollinator visitation to agricultural fields near solar-pollinator habitat with other agricultural field locations. We found increases over time for all habitat and biodiversity metrics: floral rank, flowering plant species richness, insect group diversity, native bee abundance, and total insect abundance, with the most noticeable temporal increases in native bee abundance. We also found positive effects of proximity to solar-pollinator habitat on bee visitation to nearby soybean ( Glycine max ) fields. Bee visitation to soybean flowers adjacent to solar-pollinator habitat were comparable to bee visitation to soybeans adjacent to grassland areas enrolled in the Conservation Reserve Program, and greater than bee visitation to soybean field interior and roadside soybean flowers. Our observations highlight the relatively rapid (<4 year) insect community responses to grassland restoration activities and provide support for solar-pollinator habitat as a feasible conservation practice to safeguard biodiversity and increase food security in agricultural landscapes.

14 SOLAR ENERGY↗

Bioenergy Cropping Reduces the Spatiotemporal Scaling of Soil Bacterial Biodiversity

Widespread bioenergy cropping can transform landscapes, strongly affecting biodiversity. However, the impact of bioenergy cropping on the spatiotemporal scaling of soil biodiversity remains virtually unknown, despite its profound implications for the functioning of the ecological community. Here, we investigated how bioenergy cropping influenced the spatiotemporal scaling of soil bacterial biodiversity in marginal soils (sandy loam and clay loam soils) in Oklahoma, USA. We detected strong, significant species-time-area relationships (STARs) and phylogenetic-time-area relationships (PTARs) in bacterial communities and their lineages, suggesting that STARs and PTARs exist in microbial ecology within the studied system. Also, spatiotemporal scaling rates (the slopes of STAR and PTAR models) varied substantially among bacterial lineages and were positively correlated with their 16S rRNA gene copy numbers, a genomic trait indicative of microbial growth potentials. Strikingly, bioenergy cropping significantly reduced spatiotemporal scaling rates by 6.8%-14.1%, with a more pronounced reduction observed in sandy loam soils, where those rates were significantly lower than in clay loam soils. The heterogeneity of soil phosphorus and carbon resulted in variations in bacterial spatiotemporal scaling rates. Collectively, our findings suggest that bioenergy cropping may alleviate rapid shifts in soil biodiversity across space and time, thereby stabilizing soil biodiversity and supporting its role as part of sustainable land management and climate mitigation strategies.

bacterial diversity↗

Comparison of SUSY spectra generators for natural SUSY and string landscape predictions

Models of natural supersymmetry give rise to a weak scale m weak ~ m W,Z,h ~ 100 GeV without any (implausible) finetuning of independent contributions to the weak scale. These models, which exhibit radiatively driven naturalness (RNS), are expected to arise from statistical analysis of the string landscape wherein large soft terms are favored, but subject to a not-too-large value of the derived weak scale in each pocket universe of the greater multiverse. The string landscape picture then predicts, using the Isajet SUSY spectra generator Isasugra, a statistical peak at m h ~ 125 GeV with sparticles generally beyond current LHC search limits. In this paper, we investigate how well these conclusions hold up using other popular spectra generators: SOFTSUSY, SPHENO and SUSPECT (SSS). We built a computer code DEW4SLHA which operates on SUSY Les Houches Accord files to calculate the associated electroweak naturalness measure Δ EW . The SSS generators tend to yield a Higgs mass peak ~125–127 GeV with a superparticle mass spectra rather similar to that generated by Isasugra. In an Appendix, we include loop corrections to Δ EW in a more standard notation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using AI to build a hydrobiogeochemical soil model

Soil water content is a function of inputs from precipitation and outputs via evaporation, transpiration, lateral flow, and vertical percolation, and is sensitive to biogeochemical processes. As such, soils serve as an ideal integrator of atmospheric, hydrological, and biogeochemical processes affecting the water cycle. In addition, soil water retention capacity, infiltration rates, and hydraulic conductivity can buffer or exacerbate the effects of extreme precipitation events (e.g., flooding, runoff, subsurface transport, erosion, greenhouse gas emissions) and mitigate the impact of droughts and heat waves on land systems (e.g., fire, crop failure). However, integrating water cycle measurements spanning different land atmosphere compartments across scales is a fundamental barrier for numerical model predictability. A significant challenge is that each domain (soil, hydrology, biology, and atmosphere) typically collects different sets of data at different temporal and spatial frequencies/scales, and even different dimensionalities (2D vs 3D). To implement soil as an integrator of the water cycle in land models, we suggest that novel machine learning (ML) tools can be developed to effectively simulate complex landscapes across various domains and scales, extended to regions with sparse or no data. The ultimate goals are to improve predictive understanding of land-atmosphere interactions and to extend the predictability of current Earth System Models (ESMs) through better integration of hydrological and biogeochemical data. We envision a framework in which: (1) ML-aided data reconstructions enable the merger of data sources into a unified geospatial product; (2) automated detection techniques are used to improve the knowledge of complex soil processes and interactions; and (3) this knowledge is leveraged and incorporated into models through AI-based emulators to distinctly connect the land and atmospheric compartments of the water cycle in models.

54 ENVIRONMENTAL SCIENCES↗

High-Resolution Measurement of Soil Thermal Properties and Moisture Content Using a Novel Heated Fiber Optics Approach

Hydrological parameters are scale dependent. Efficient monitoring techniques capable of measuring hydrological parameters, such as soil moisture content (θ), over a wide range of spatial scales are essential for understanding the complexity of water and energy movement across the landscape. Techniques to measure θ over spatial scales in the range from centimeters to thousands of meters, however, are sorely lacking. Recent improvements in the distributed temperature sensing (DTS) technology supported the development of novel techniques to fill that gap. However, improvements in the accuracy and applicability of DTS techniques are still needed. This study investigates the possibility of improving the accuracy of the fiber optics dual-probe heat-pulse (FO-DPHP) DTS technique by using a new design to maintain the spacing between the FO-DPHP probes and by introducing a novel data interpretation approach. The accuracy of the novel FO-DPHP design was tested at different θ in a sand column experiment. The FO-DPHP measurements obtained using traditional and novel data interpretation approaches were compared against independent measurements from several calibrated soil water content (EC5) sensors. Monte-Carlo analyses were also performed to assess the impact of DTS measurement errors on the accuracy achieved using the data interpretation approaches. The novel design and data interpretation approach allowed for accurate measurements of soil thermal properties and θ without the need to perform a hard-to-achieve soil-specific calibration. Measured θ had mean errors and standard deviations <0.03 and <0.01 m 3 m -3 , respectively, for moisture conditions ranging from dry to near saturation. The standard deviation in the measured heat capacity was <0.01 MJ m -3 K -1 .

42 ENGINEERING↗

NETL Direct Air Capture Center

In 2022 Congress authorized the $25M National Energy Technology Laboratory Direct Air Capture Center. The facility will be specifically targeted at accelerating the commercialization of technologies beyond the conceptual stage which have not yet reached full pilot-scale (TRL 3 to 6). The ability to operate over a wide range of conditions will help the developers to understand how their technologies respond in different climates, from summer to winter and arid to tropical. NETL recognizes that DAC technology is still early in its evolution, and a wide variety of highly varied technologies are being explored. The Center will be designed with substantial flexibility to accommodate the rapidly evolving technological landscape. Testing systems at three scales will be included: lab-scale systems designed to examine the long-term stability of DAC materials, bench-scale module testing systems capable of probing flow dynamics, and small pilot-scale skid rooms able to test prototype DAC units under a wide variety of climate conditions. The NETL DAC Center will feature dedicated engineering, technician, scientific and logistical support for experimental system design, installation, operation of experiments, and interpretation of results for projects including but not limited to kinetics of absorption/desorption, thermal duty, and post-mortem elemental characterization to understand degradation. The NETL DAC Center projects will also have access to dedicated process modeling and analysis to evaluate the technoeconomic aspects of new technologies. NETL’s Systems Engineering and Analysis (SEA) team, the Carbon Capture Simulation Initiative (CCSI), and the Institute for the Design of Advanced Energy Systems (IDAES) are all potential collaborators with NETL’s testing partners from industry, academia, and other research institutions. NETL also has world class capabilities in device scale modeling (i.e., MFIX) that will be available to help design more efficient contactors and optimize unique internal configurations that can be realized by advanced manufacturing. The talk will cover the design and capabilities of the center, the planned availability, and feedback will be solicited from the audience on DAC testing needs.

Luebke, David↗