Search NASA⌕ Search

SEARCH · Search NASA

Results for “layered rocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Minor planets and related objects. VIII - Deimos.

Evaluation of 12 polarization measurements of Deimos in blue light were obtained at phase angles between 5 and 31 deg. A well-developed negative branch, with minimum polarization approximately -1.5% near phase angle 11 deg, indicates that Deimos is not bare rock but has a particulate surface layer of dark dust or powder. The phase angle of inversion is 19.5 deg, and the slope of the positive branch is 0.26 plus or minus 0.01% per degree. On the basis of the slope-albedo law for the moon and the major asteroids, the geometrical albedo of Deimos in blue light should be 0.07 plus or minus 0.01, and the radius 5.4 plus or minus 0.8 km. These values are in good agreement with preliminary Mariner 9 data.

Zellner, B.↗

Correlation of high energy muons with primary composition in extensive air shower

An experimental investigation of high energy muons above 200 GeV in extensive air showers has been made for studying high energy interaction and primary composition of cosmic rays of energies in the range 10 to the 14th power approx. 10 to the 15th power eV. The muon energies are estimated from the burst sizes initiated by the muons in the rock, which are measured by four layers of proportional counters, each of area 5 x 2.6 sq m, placed at 30 m.w.e. deep, Funasaka tunnel vertically below the air shower array. These results are compared with Monte Carlo simulations based on the scaling model and the fireball model for two primary compositions, all proton and mixed.

Chou, C.↗

Magsat and POGO magnetic anomalies over the Lord Howe Rise Evidence against a simple continental crustal structure

Magsat average scalar and POGO reduced-to-pole magnetic anomaly data both show prominent positive signatures over the Lord Howe Rise. Although generally assumed to be continental in nature, the Lord Howe Rise cannot simply be submerged ordinary continental crust, which would produce a negative anomaly contrast with respect to the surrounding higher susceptibility oceanic crust. Three-dimensional modeling of the plateau, using the known crustal structure and assuming an induced origin for the satellite elevation anomaly, leads to a model in which the lowest crustal layer in an otherwise 'continental' crustal structure has an unusually high susceptibility in the range cgs 0.008-0.010 (SI 0.10-0.13). Replacement or alteration of the lowest layer by a high-susceptibility rock type may be related to the subsidence of the plateau.

Frey, H.↗

Aeolian weathering of Venusian surface materials - Preliminary results from laboratory simulations

An attempt is made to duplicate the atmospheric temperature, pressure, and approximate gas composition of all surface elevations on Venus by means of a simulator environment in which particles are impacted against rock targets as a way of studying planetary aeolian processes. While particles are abraded even at the low impact velocities envisioned for Venus, the same particles do not generate basaltic rock abrasion for impact velocities lower than 1 m/sec; comminution debris is instead transferred onto rock surfaces to form an accretion layer. These phenomena are seen as functions of the greater than 660 K temperatures encountered.

Marshall, John R.↗

Oxygen in the Martian atmosphere: Regulation of PO2 by the deposition of iron formations on Mars

During Earth's early history, and prior to the evolution of its present day oxygenated atmosphere, extensive iron rich siliceous sedimentary rocks were deposited, consisting of alternating layers of silica (chert) and iron oxide minerals (hematite and magnetite). The banding in iron formations recorded changes of atmosphere-hydrosphere interactions near sea level in the ancient ocean, which induced the oxidation of dissolved ferrous iron, precipitation of insoluble ferric oxides and silica, and regulation of oxygen in Earth's early atmosphere. Similarities between the Archean Earth and the composition of the present day atmosphere on Mars, together with the pervasive presence of ferric oxides in the Martian regolith suggest that iron formation might also have been deposited on Mars and influenced the oxygen content of the Martian atmosphere. Such a possibility is discussed here with a view to assessing whether the oxygen content of the Martian atmosphere has been regulated by the chemical precipitation of iron formations on Mars.

Burns, Roger G.↗

Developing New Tools for Modeling Rocket Plume-Surface Interactions

With NASA’s goal to land the next human on the lunar surface in the next few years, it has become vitally important that we have a better understanding of how future landing spacecraft will interact with the unique properties of regolith¬¬––the layer of loose, unconsolidated dust and rock on the lunar surface¬¬––which can cause hazards like visual obstructions, particulate clouds, and cratering of the landing zone. Researchers from the Fluid Dynamics Branch at NASA’s Marshall Space Flight Center are performing plume-surface interaction (PSI) simulations between lander engine plumes and unprepared regolith surfaces, and have developed new tools to provide predictive PSI environments for various NASA projects and missions, including the Human Lander System (HLS), Commercial Lunar Payload Services (CLPS), and future Mars landers. These tools allow the researchers to determine how to best meet the simulation and time requirements for each project by varying model fidelity. The highest fidelity tool is the Gas Granular Flow Solver (Loci/GGFS) that models gas-particle multi-phase interactions to predict regolith cratering and ejection of particles into the immediate surroundings of the lander. At its highest fidelity, it can model microscopic regolith particle interactions with a particle size/shape distribution that statistically replicates actual regolith, however, to be most effective with today’s computing resources, it is currently run using only one to three equivalent particle sizes/shapes. The team also incorporated engineering models into their software suite to create production-ready hybrid tools with reduced fidelity. At the lowest fidelity, the computational fluid dynamics (CFD) code Loci/CHEM+DIGGEM can predict crater depth over time by relating local CFD-predicted surface shear stresses to a model of erosion mass flux.

plume surface interaction↗

Precision Subsampling System for Mars Surface Missions

The ability to analyze heterogeneous rock samples at fine spatial scales would represent a powerful addition to our planetary in situ analytical toolbox. This is particularly true for Mars, where the signatures of past environments and, potentially, habitability are preserved in chemical and morphological variations across sedimentary layers and among mineral pr.ases in a given rock specimen. On Earth, microbial life often associates with surfaces at the interface of chemical nutrients, and ultimately retains sub-millimeter to millimeter-scale layer confinement in fossilization. On Mars, and possibly other bodies, trace chemical markers (elemental, organic/molecular, isotopic, chiral, etc.) and fine-scale morphological markers (e.g., micro-fossils) may he too subtle, degraded, or ambiguous to be detected, using miniaturized instrumentation, without some concentration or isolation. This is because (i) instrument sensitivity may not be high enough to detect trace markers in bulk averages; and (ii) instrument s~lectiviry may not be sufficient to distinguish such markers from interfering/counteracting signals from the bulk. Moreover from a fundamental chemostratigraphic perspective there would be a great benefit to assessing specific chemical and stable isotopic gradients, over millimeter-to-centimeter scales and beyond, with higher precision than currently possible in situ. We have developed a precision subsampling system (PSS) that addresses this need while remaining relatively flexible to a variety of instruments that may take advantage of the capability on future missions. The PSS is relevant to a number of possible lander/rover missions, especially Mars Sample Return. Our specific PSS prototype is undergoing testing under Mars ambient conditions, on a variety of natural analog rocks and rock drill cores, using a set of complementary flight-compatible measurement techniques. The system is available for testing with other contact instruments that may benefit from precision sampling.

Mahaffy, P. R.↗

Water Content of Earth's Continental Mantle Is Controlled by the Circulation of Fluids or Melts

A key mission of the ARES Directorate at JSC is to constrain models of the formation and geological history of terrestrial planets. Water is a crucial parameter to be measured with the aim to determine its amount and distribution in the interior of Earth, Mars, and the Moon. Most of that "water" is not liquid water per se, but rather hydrogen dissolved as a trace element in the minerals of the rocks at depth. Even so, the middle layer of differentiated planets, the mantle, occupies such a large volume and mass of each planet that when it is added at the planetary scale, oceans worth of water could be stored in its interior. The mantle is where magmas originate. Moreover, on Earth, the mantle is where the boundary between tectonic plates and the underlying asthenosphere is located. Even if mantle rocks in Earth typically contain less than 200 ppm H2O, such small quantities have tremendous influence on how easily they melt (i.e., the more water there is, the more magma is produced) and deform (the more water there is, the less viscous they are). These two properties alone emphasize that to understand the distribution of volcanism and the mechanism of plate tectonics, the water content of the mantle must be determined - Earth being a template to which all other terrestrial planets can be compared.

Peslier, Anne↗

Glasses formed by hypervelocity impact

This paper presents description, classification, and geological setting of impact glasses, which are formed as a result of meteorite impacts with the planetary surface, and discusses the impact-glass formation process in the context of cratering mechanics. Impact glasses can be classified as belonging to two major groups: (1) mineral glasses, which are identical in composition to a mineral, and (2) rock glasses, which have the composition of a rock or a mixture of various rocks. Rock glasses may be (1) melt ejecta, (2) parts of a coherent melt layer inside the crater cavity, or (3) dikes or veins. The composition of rock glasses at a particular crater can be matched by that of the target. In nonporous rocks, the formation of rock glasses requires peak pressures in excess of 60-80 GPa, while mineral glasses are formed in the pressure range of about 25 to 55 GPa; in porous rocks, interstitial glass forms at pressures as low as 5 GPa.

Stoeffler, D.↗

Exploring Mars for Evidence of Habitable Environments and Life

The climate of Mars has been more similar to that of Earth than has the climate of any other planet in our Solar System. But Mars still provides a valuable alternative example of how planetary processes and environments can affect the potential presence of life elsewhere. For example, although Mars also differentiated very early into a core, mantle and crust, it then evolved mostly if not completely without plate tectonics and has lost most of its early atmosphere. The Martian crust has been more stable than that of Earth, thus it has probably preserved a more complete record of its earliest history. Orbital observations determined that near-surface water was once pervasive. Orbiters have identified the following diverse aqueous sedimentary deposits: layered phyllosilicates, phyllosilicates in intracrater fans, plains sediments potentially harboring evaporitic minerals, deep phyllosilicates, carbonate-bearing deposits, intracrater clay-sulfate deposits, Meridiani-type layered deposits, valles-type layered deposits, hydrated silica-bearing deposits, and gypsum plains. These features, together with evidence of more vigorous past geologic activity, indicate that early climates were wetter and perhaps also somewhat warmer. The denser atmosphere that was required for liquid water to be stable on the surface also provided more substantial protection from radiation. Whereas ancient climates might have favored habitable environments at least in some localities, clearly much of the Martian surface for most of its history has been markedly less favorable for life. The combination of dry conditions, oxidizing surface environments and typically low rates of sedimentation are not conducive to the preservation of evidence of ancient environments and any biota. Thus a strategy is required whereby candidate sites are first identified and then characterized for their potential to preserve evidence of past habitable environments. Rovers are then sent to explore the most promising candidates. The Mars Exploration Rover (MER) Opportunity revealed that water once flowed to the surface across the vast Meridiani plains, creating saline lakes whose waters were roiled by ancient winds that also sculptured their salt deposits into sand dunes. Opportunity then drove more than 30 km to explore even older deposits on a crater rim. MER Spirit found evidence that thermal waters (heated by volcanism or by impacts?) altered rocks to create sulfate salts, and siliceous sinters. These discoveries indicate that an early hydrological cycle apparently sustained precipitation, streams and lakes. Liquid water participated in rock weathering reactions, such as iron and sulfur oxidation, that created distinctive weathering regimes. Volcanism, impacts, groundwater and ice interacted at least locally. Redox chemical energy from volcanism, hydrothermal activity and weathering of crustal materials would have been available for any life. Thus conditions might have supported life in the past, at least locally. The main objective of the Mars Science Laboratory (MSL) Curiosity rover is to determine the extent to which Gale crater hosted environments capable of supporting microbial life. The rover has already found stream gravels as well as sediments that might have been deposited in an ancient lake. The rover is now traversing to Mt. Sharp, a 5 km-high mound that is located on the crater floor and that exhibits layered sedimentary rocks having diverse minerals (sulfates and clays) that apparently formed in the presence of liquid water. This rock sequence was deposited over an extended time period in diverse potentially habitable watery environments. Curiosity is poised to characterize a a well-preserved rock record of hundreds of millions of years of diverse environments and profound climate change.

layered phyllosilicates↗

A review of problems and progress in studies of satellite magnetic anomalies

A review is conducted of studies performed during the Magsat project. The obtained data are considered, taking into account questions of data availability, aspects of orbit attitude determination, ionospheric noise, a field model, and an anomaly field presentation. Models for interpretation are discussed, giving attention to forward modeling, and equivalent layer inverse modeling. In an evaluation of rock property constraints, the magnetic bottom is discussed along with Curie points, metamorphism and magnetization, and the direction of magnetization.

Mayhew, M. A.↗

Petrology of the igneous rocks

Papers published during the 1983-1986 period on the petrology and geochemistry of igneous rocks are discussed, with emphasis on tectonic environment. Consideration is given to oceanic rocks, subdivided into divergent margin suites (mid-ocean ridge basalts, ridge-related seamounts, and back-arc basin basalts) and intraplate suites (oceanic island basalts and nonridge seamounts), and to igneous rocks formed at convergent margins (island arc and continental arc suites), subdivided into volcanic associations and plutonic associations. Other rock groups discussed include continental flood basalts, layered mafic intrusions, continental alkalic associations, komatiites, ophiolites, ash-flow tuffs, anorthosites, and mantle xenoliths.

Mccallum, I. S.↗

Microbial mats, stromatolites and the rise of oxygen in the Precambrian atmosphere

Microbial mats are stratified communities that develop within the environmental microgradients established at the interfaces of water and solid substrates (Cohen, 1989). Stromatolites, the lithified remains of layered accumulations of microbial mats, occur in rocks as old as 3.5 Ga (Lowe, 1980; Walter et al., 1980). These lithified microbial communities represent the most ancient, widespread ecosystems known, and it is useful to explore their role in the accumulation of free oxygen in the ancient atmosphere.

NASA Program Exobiology↗

Method for Manufacturing Thin-film Lithium Microbatteries

A process for making thin-film batteries including the steps of cleaning a glass or silicon substrate having an amorphous oxide layer several microns thick; defining with a mask the layer shape when depositing cobalt as an adhesion layer and platinum as a current collector; using the same mask as the preceding step to sputter a layer of LiCoO2 on the structure while rocking it back and forth; heating the substrate to 300 C. for 30 minutes; sputtering with a new mask that defines the necessary electrolyte area; evaporating lithium metal anodes using an appropriate shadow mask; and, packaging the cell in a dry-room environment by applying a continuous bead of epoxy around the active cell areas and resting a glass slide over the top thereof.

Jay F Whitacre↗

Comparison of Observed Surface Temperatures of 4 Vesta to the KRC Thermal Model

In this work, we will compare ob-served temperatures of the surface of Vesta using data acquired by the Dawn [1] Visible and Infrared Map-ping Spectrometer (VIR-MS) [2] during the approach phase to model results from the KRC thermal model. High thermal inertia materials, such as bedrock, resist changes in temperature while temperatures of low thermal inertia material, such as dust, respond quickly to changes in solar insolation. The surface of Vesta is expected to have low to medium thermal inertia values, with the most commonly used value being extremely low at 15 TIU [4]. There are several parameters which affect observed temperatures in addition to thermal inertia: bond albedo, slope, and surface roughness. In addition to these parameters, real surfaces are rarely uniform monoliths that can be described by a single thermal inertia value. Real surfaces are often vertically layered or are mixtures of dust and rock. For Vesta's surface, with temperature extremes ranging from 50 K to 275 K and no atmosphere, even a uniform monolithic surface may have non-uniform thermal inertia due to temperature dependent thermal conductivity.

Titus, T. N.↗

Lunar Regolith Simulant User's Guide: Revision A

This guide is titled Lunar Regolith Simulant User's Guide, Rev A, and two points need to be made about the title. First, is the use of the term "regolith". During the Apollo Program, the term "soil" was used for taking a sample of the loose material on the surface, and then cataloging that sample in the lunar curation database as a "soil sample". By the 1980s, the term "regolith" gained favor by lunar scientists. In the Lunar Sourcebook (Heiken et al., 1991), regolith is defined as "a general term for the layer or mantle of fragmental and unconsolidated rock material, whether residual or transported and of highly varied character, that nearly everywhere forms the surface of the land and overlies or covers bedrock". Regolith is a terrestrial term that seems to go back to 1897, according to a recent paper by Huggett (2023). Huggett summed up his paper by writing, "soil and regolith are one in the same". "Regolith" will mostly be used throughout this guide, as it tends to separate in one's mind the unique nature of the Moon's surface when compared to the inherent bias humans have in their mind when they hear and use the word "soil". When referring to Apollo samples, "soil" is used for historical context and in some places the simple term "lunar simulant" is also used. Secondly, Rev A is used in the title because NASA released its first Lunar Regolith Simulant User's Guide in 2010, near the end of NASA's Constellation Program (Schrader et al., 2010). This guide follows in the pattern of that first guide and will be updated on a periodic basis as new simulants are created, characterized and used, and as new information emerges about the Moon's regolith due to new lunar exploration missions, both robotic and human.

Simulant↗

Layered Deposits of Arabia Terra and Meridiani Planum: Keys to the Habitability of Ancient Mars

Understanding the habitability of ancient Mars is a key goal in the exploration of that planet. Evidence for conditions favorable to early life must be sought in ancient sedimentary rocks, such as those of Arabia Terra and Meridiani Planum. Arabia Terra, the northernmost extension of the ancient highlands, is dominated by cratered plains and minor ridged units. These plains extend south into the adjacent Meridiani Planum. The Opportunity rover landed in northern Meridiani, close to the border with Arabia. High resolution MOC images reveal extensive layered sequences across much of the Arabia and Meridiani region. These layers have been interpreted as eroded remnants of sedimentary rock deposits (Edgett, 2005). The layered sequences are concentrated in the SW quadrant of Arabia and in northern Meridiani. Preliminary mapping by Edgett (2005) distinguished four large scale layered sequences in the Arabia and Meridiani region. These have dimensions of hundreds to more than 1,000 km. MOLA altimetry shows that each of the sequences can attain a thickness of 200 to 400 m, with a total thickness greater than 1 km. The sequences are generally flat lying, with regional slopes of a few degrees. Much finer layering is evident within a number of craters. The plains and ridged units of the Arabia and Meridiani region were originally mapped as Noachian based on crater statistics, particularly the number of large craters (Scott and Carr, 1978). The layered sequences in the current study postdate many, but not all, of these large craters. The layered sequences have partially or totally filled a number of craters with diameters ranging from 20 to over 50 km. The topmost layered sequence, as well as the lower two sequences, have intermediate thermal inertia, as derived from THEMIS, indicative of moderate induration. The TES spectra from the lower sequences include features indicative of basalt. Some areas of the topmost sequence, which includes the Opportunity landing site, have TES spectra dominated by hematite. Just below this topmost sequence lies a sequence with higher thermal inertia, indicative of more indurated or coarser grained material. The TES spectra of this sequence lack distinctive mineral features, and the rocks may be obscured by a thin coating of dust. The layers have been extensively eroded. The uppermost sequences are characterized by deeply scalloped boundaries. Filled craters have been partially exhumed. Finely layered deposits within craters have been strongly dissected. Landforms uniquely attributable to wind erosion are rare, but erosive styles and geomorphology characteristic of water and possibly ice are present. The layered sequences in Arabia Terra and Meridiani Planum likely reflect an epoch when the planet was much more habitable than it is today. Several areas in these layered sequences are under intensive study as candidate landing sites for the 2009 Mars Science Laboratory.

Allen, Carlton C.↗