Search NASA⌕ Search

SEARCH · Search NASA

Results for “low temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Low Temperature Shape Memory Alloys for Adaptive, Autonomous Systems Project

The objective of this joint activity between Kennedy Space Center (KSC) and Glenn Research Center (GRC) is to develop and evaluate the applicability of 2-way SMAs in proof-of-concept, low-temperature adaptive autonomous systems. As part of this low technology readiness (TRL) activity, we will develop and train low-temperature novel, 2-way shape memory alloys (SMAs) with actuation temperatures ranging from 0 C to 150 C. These experimental alloys will also be preliminary tested to evaluate their performance parameters and transformation (actuation) temperatures in low- temperature or cryogenic adaptive proof-of-concept systems. The challenge will be in the development, design, and training of the alloys for 2-way actuation at those temperatures.

Falker, John↗
NASA NTRS1988

Low temperature safety of lithium-thionyl chloride cells

The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

Subbarao, S.↗
NASA NTRSDate not supplied

A Multiphysics Study to Improve Specific Energy of Primary Batteries for Low Temperature Operation for Deep Space Missions

Several lander missions on the outer planets such as Europa, Enceladus, and Titan require electrical power to operate scientific and communication equipment. The traditional power generation methods, such as a photovoltaic array, are not feasible as their efficiency drops significantly at these vast distances. The novel radioisotope power systems are not practical today based on current lander designs and the effectiveness of these systems. To perform in situ science on distant planets, a high specific energy battery (>700 Wh/kg) needs to operate for about 480 hours under cold temperatures (-40C or 0C) [1]. While a primary battery such as Li-CFx can provide high specific energy at room temperature, its specific capacity decreases significantly at low temperatures. One of the causes for this drop is low ion and electrical conductivity, and slower reaction kinetics. Slower transport and facile kinetics lead to an increase in the battery’s resistance and higher voltage drops during the cell operation, thus reducing specific capacity. Both the transport and kinetics show a strong dependence on temperature. Thus, a small temperature rise can lead to an increase in the reaction rate and ion conductivity; since the temperature, cell resistance, and specific capacity are interdependent. A conventional battery model accounts for ohmic, thermodynamic, and, electrochemical, and chemical decomposition heating. The ohmic heating can be controlled by designing a resistive microstructure and varying the ratios of the active materials [2]. The kinetics can be improved by increasing the surface area, reducing the particle size, or adding a catalyst. These parameters are often optimized to achieve high specific energy at room temperatures. A similar optimization study is not available at low temperatures and for a primary (high specific energy) battery. For this presentation, we will explore the effect of geometrical, microstructural, and material properties on optimal specific capacity at low temperatures through multiphysics simulations. The ion transport resistance depends on the porosity and the tortuosity of an electrode and the separator.

M. Mehta↗
NASA NTRS2003

Electrical Devices and Circuits for Low Temperature Space Applications

The environmental temperature in many NASA missions, such as deep space probes and outer planetary exploration, is significantly below the range for which conventional commercial-off-the-shelf electronics is designed. Presently, spacecraft operating in the cold environment of such deep space missions carry a large number of radioisotope or other heating units in order to maintain the surrounding temperature of the on-board electronics at approximately 20 C. Electronic devices and circuits capable of operation at cryogenic temperatures will not only tolerate the harsh environment of deep space but also will reduce system size and weight by eliminating or reducing the heating units and their associate structures; thereby reducing system development cost as well as launch costs. In addition, power electronic circuits designed for operation at low temperatures are expected to result in more efficient systems than those at room temperature. This improvement results from better behavior in the electrical and thermal properties of some semiconductor and dielectric materials at low temperatures. An on-going research and development program on low temperature electronics at the NASA Glenn Research Center focuses on the development of efficient electrical systems and circuits capable of surviving and exploiting the advantages of low temperature environments. An overview of the program will be presented in this paper. A description of the low temperature test facilities along with selected data obtained from in-house component testing will also be discussed. On-going research activities that are being performed in collaboration with various organizations will also be presented.

Patterson, R. L.↗
NASA NTRS2009

Li/CFx Cells Optimized for Low-Temperature Operation

Some developments reported in prior NASA Tech Briefs articles on primary electrochemical power cells containing lithium anodes and fluorinated carbonaceous (CFx) cathodes have been combined to yield a product line of cells optimized for relatively-high-current operation at low temperatures at which commercial lithium-based cells become useless. These developments have involved modifications of the chemistry of commercial Li/CFx cells and batteries, which are not suitable for high-current and low-temperature applications because they are current-limited and their maximum discharge rates decrease with decreasing temperature. One of two developments that constitute the present combination is, itself, a combination of developments: (1) the use of sub-fluorinated carbonaceous (CFx wherein x<1) cathode material, (2) making the cathodes thinner than in most commercial units, and (3) using non-aqueous electrolytes formulated especially to enhance low-temperature performance. This combination of developments was described in more detail in High-Energy-Density, Low- Temperature Li/CFx Primary Cells (NPO-43219), NASA Tech Briefs, Vol. 31, No. 7 (July 2007), page 43. The other development included in the present combination is the use of an anion receptor as an electrolyte additive, as described in the immediately preceding article, "Additive for Low-Temperature Operation of Li-(CF)n Cells" (NPO- 43579). A typical cell according to the present combination of developments contains an anion-receptor additive solvated in an electrolyte that comprises LiBF4 dissolved at a concentration of 0.5 M in a mixture of four volume parts of 1,2 dimethoxyethane with one volume part of propylene carbonate. The proportion, x, of fluorine in the cathode in such a cell lies between 0.5 and 0.9. The best of such cells fabricated to date have exhibited discharge capacities as large as 0.6 A h per gram at a temperature of 50 C when discharged at a rate of C/5 (where C is the magnitude of the current, integrated for one hour, that would amount to the nominal charge capacity of a cell).

Smart, Marshall C.↗
DOE OSTI2025

Enhancing low-temperature sintering in the MgO-LiF system: Mechanistic insights

In the present article, we provide compelling evidence that minor (1 wt%) additions of micron and nanometre-sized LiF particles in MgO decompose leading to free Li diffusing into MgO surfaces enhancing vacancy production during direct current sintering. The addition of nanometre-sized LiF particles leads to a > 500 °C reduction in the sintering temperature and over 99 % theoretical density of final consolidated compacts. Correlating differential scanning calorimetry with in-situ x-ray diffraction, together with Schottky calculations, post sintering electron microscopy and laser induced breakdown spectroscopy, we uncover critical insights into this impressive reduction in sintering temperature. Our quantitative analysis reveals that MgO and LiF interact at low temperatures with the diffusion of Li into the surface of MgO particles due to the intrinsic structural disorder of the LiF and MgO crystallites. Nanometre-sized LiF particles were found to react the most at low temperatures due to their increased structural disorder. Our multimodal characterization points to a Li-promoted densification and sintering mechanism. This impressive reduction in sintering temperature can be harnessed to promote low-temperature fabrication of MgO-based composites for technological applications.

36 MATERIALS SCIENCE↗
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low- temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary- sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermodynamically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counterintuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Hudson, Reggie L.↗
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low- temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary- sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermody-namically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counter- intuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Hudson, Reggie L.↗
NASA NTRS1967

Development of low temperature battery

Self-contained low temperature battery system consisting of a magnesium anode, potassium thiocyanate-ammonia electrolyte and a cathode composed of a mixture of sulfur, carbon, and mercuric sulfate operates for at least seventy-two hours within a discharge temperature range of plus 20 degrees C to minus 90 degrees C.

Armstrong, G. M.↗
NASA NTRS1977

Low-temperature coal desulfurization

Economical, low-temperature chlorinolysis converts sulfur to water-soluble sulfates. Sulfates are removed by washing. Subsequent steps dry coal and remove chlorine. Chlorine and solvents can be reused.

Ganguli, P. S.↗
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low-temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary-sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermodynamically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counter-intuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Reggie L Hudson↗
NASA NTRS2019

Preparation, Identification, and Low-Temperature Infrared Spectra of Two Elusive Crystalline Nitrile Ices

Infrared (IR) spectra of the alkyl nitrile ices CH3CN and CH3CH2CN are relevant to the study of the low-temperature chemistry of objects within and beyond the Solar System, but the thermodynamically favored low-temperature crystalline phases of these compounds have not been presented and identified in the planetary-sciences literature. Moreover, there is a large variation in the published IR spectra of these two icy solids, including spectra that are used for the analyses of spacecraft data from the Voyager and Cassini missions. Here the IR spectra of the low-temperature crystalline forms of CH3CN and CH3CH2CN, which are the thermodynamically stable phases at Titan temperatures, are presented for the first time with all samples being made by vapor-phase deposition. Conditions are described for producing these ice phases for both compounds, and new measurements are reported of ice density and refractive index, quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, nitrile abundances in extraterrestrial environments. Comparisons are drawn between CH3CN and CH3CH2CN, an earlier prediction on their similar crystallization behaviors is verified, and previous work is examined in light of these new results, including a counter-intuitive observation in which the low-temperature phase of an ice is made by heating a high-temperature phase. Applications and extensions are described.

Ices, IR spectroscopy, Titan, organic chemistry, i↗
NASA NTRS2016

The Effect of Electrolyte Composition on Lithium Plating During Low Temperature Charging of Li-Ion Cells

In the present work, a number of additives have been investigated for their effect on the charge characteristics of cells containing low temperature, high ester content electrolytes (1.0 M LiPF6 in ethylene carbonate (EC) + ethyl methyl carbonate (EMC) + methyl propionate (MP) 20:20:60 vol % + X additive). These experimental three-electrode cells are composed of graphite anodes, LiNiCoAlO2 cathodes, and a lithium metal reference electrode. Cells were first subjected to electrochemical characterization at various temperatures, consisting of performing Electrochemical Impedance Spectroscopy (EIS), linear micropolarization and Tafel polarization measurement to determine the kinetic parameters for both the anodes and cathodes. Following electrochemical characterization, the cells were subjected to charging at decreasing temperatures using C/5 rates to 4.10V, with a constant potential C/50 current taper. Analysis of the C/20 discharge following the charge at low temperature revealed either the presence or absence of a high voltage plateau during the initial stages of the discharge. This plateau has been linked to the presence of lithium metal on the anode previously and was used as a measure for the extent of lithium plating in the cell. Differential analysis (dV/dQ) was applied as well to more clearly visualize the position of the high voltage plateau and use the peak position (x-axis) in the dV/dQ plot as a gauge for the amount of plating which took place in the cell on the prior charge. Most additives investigated increased the resistance of the anode and decreased the resistance of the cathode, thereby leading to an overall increase in plating observed at low temperature. One additive, LiFSI, was found to be beneficial during low temperature charging, however studies of electrode kinetics from the cell containing LiFSI did not reveal significant improvements compared to the baseline.

Jones, John-Paul↗
NASA NTRS2000

The Development of the Low Temperature Microgravity Physics Facility

We describe the design and development of the Low Temperature Microgravity Physics Facility, which is intended to provide long duration (4.5 months) low temperature (1.4K) and microgravity conditions for scientists to perform breakthrough investigations on board the International Space Station.

Low Temperature Fundamental Physics Microgravity P↗