Search NASA⌕ Search

SEARCH · Search NASA

Results for “low viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Dissipative melting as a mechanism for core formation

Cosmochemical studies strongly favor a near-homogeneous accretion of the earth. These studies also show that core segregation probably occurred within the first 100,000 years of earth history. Mechanisms of core formation have received relatively little attention. The principal purpose of this paper is to examine dissipative melting as a possible mechanism for core segregation. For a large iron body migrating through the mantle, the potential energy lost by the body is dissipated by frictional heating. If the body has a radius greater than about 30 km, the frictional heating is sufficient to melt a path through which the body can fall. If the iron body is liquid (as expected) with a low viscosity, it would penetrate the mantle as a diapir. The problem of an immiscible liquid body melting its way through a solid is solved, and a family of diapir shapes is obtained. It is found that dissipative heating may be a viable mechanism for core segregation if sufficiently large bodies of liquid iron can form.

Turcotte, D. L.↗
NASA NTRS1984

Mapping convection in the mantle

Long-period (100-250 sec.) Love and Rayleigh waves are used to map heterogeneity and azimuthal anisotropy in the upper mantle. Spherical harmonic descriptions of anisotropy up to l = m = 3 and 2 theta are derived. Azimuthal anisotropy obtains values as high as 1.5 percent. There is good correlation of fast Rayleigh wave directions with upper mantle return flow directions derived from kinematic considerations. This is consistent with a-axis of olivine being aligned in the flow direction. The main differences between the flow models and the Rayleigh wave azimuthal variation maps occur in the vicinity of hotspots. The correlation of azimuthal anisotropy with upper mantle return flow directions, rather than with plate directions, suggests that part of the return flow is in the upper mantle and this, in turn, implies a low viscosity channel.

Tanimoto, T.↗
NASA NTRS1984

Tidal disruption and the origin of the Moon

The dynamic problem of the tidal disruption of a rocky planetismal was solved by a direct integration of the fully three-dimensional, nonlinear equations of motion. The hypothesis that any object that passes within the Roche limit is disrupted was disproven. A time dependent solution was performed numerically, treating the planetismal as a fluid with a Murnaghan equation of state in the solid regions and zero pressure otherwise. Calculations show that a rocky body which passes by the Earth on a parabolic orbit with a perigee within the Roche limit is not tidally disrupted. Objects on hyperbolic orbits would experience even less tidal disruption. The results herein do not apply to bodies with very low viscosity. It is shown, however, that tidal disruption can be ruled out as a mechanism for reducing planetismal masses. Mechanisms for forming the Moon which rely upon tidal disruption are unlikely to be correct.

Mizuno, H.↗
NASA NTRS1985

Fault Offsets and Lateral Crustal Movement on Europa

Structural evidence is presented for tension cracking associated with strike slip faulting and crustal movement in the bright ice covered Galilean satellite Europa. The structure and morphology of wedge shaped bands argues that they formed as a result of the rotation and lateral displacement of crustal units bounded by near vertical faults penetrating through the brittle crustal layer. The significant rotation and lateral motion of crustal blocks near the anti-jove point on Europa, without graben formation, also argues that the lithosphere in the fractured area is mechanically decoupled from the solid silicate interior, by either warm ice at depth or liquid water. Ice at depth and at a large fraction of its melting temperature is expected to behave as a fluid over geologically short time intervals due to its extremely low viscosity relative to the cold, brittle ice near the surface. One proposed convection mechanism is thus considered unlikely as it would be difficult to transmit internal stress through a decoupling layer to the surface.

Schenk, P. M.↗
NASA NTRS1987

G-300: The first French Getaway Special microgravity measurements of fluid thermal conductivity

Thermal conductivity measurements on liquids are difficult to perform on Earth because of thermal motions due to convection. In microgravity, the convection due to buoyancy is evanescent, and a strong reduction of Rayleigh and Nusselt numbers can be expected. Three low viscosity liquids are selected to carry out the measurements; distilled water (standard) and two silicone oils. A modified hot plate method with a simplified guard ring is used; the reduction of convective motions permitted the use in the experimental cells of larger interplate distances and/or temperature differences than in Earth measurements, improving the accuracy. Comparisons between Earth and orbit results may help to understand the convection occurrence in the cells. Thermal, vibrational, and EMI tests have proved that the design satisfies the NASA requirements.

Perron, J. C.↗
NASA NTRS1987

The delineation and interpretation of the Earth's gravity field

The geoid and topographic fields of the central Pacific were delineated and shown to correlate closely at intermediate wavelengths (500 to 2500 km). The associated admittance shows that anomalies having wavelengths less than about 1000 km are probably supported by the elastic strength of the lithosphere. Larger wavelength anomalies are due to dynamic effects in the sublithosphere. Direct modeling of small scale convection in the asthenosphere shows that the amplitudes of observed geoid and topographic anomalies can be independently matched, but that the observed admittance cannot. Only by imposing an initial regional variation in the thermal regime is it possible to match the admittance. It is proposed that this variation may be due to differences in the onset time of convection beneath the lithosphere of different ages. That is, convection beneath thickening lithosphere is strongly dependent on the rate of thickening (V) relative to the rise time for convection. The critical Rayleigh number contains the length scale K/V, where K is thermal diffusivity. Young, fast growing lithosphere stabilizes the underlying asthenosphere unless it has an unusually low viscosity. Lithosphere of different age, separated by fracture zones, will go unstable at different times, producing regional horizontal temperature gradient that may strongly influence convection. Laboratory and numerical experiments are proposed to study this form of convection and its influence on the geoid.

Marsh, Bruce D.↗
NASA NTRS1987

Preliminary results of geologic and remote sensing studies of Rima Mozart

In order to better understand the processes responsible for the formation of lunar sinuous rilles, a study of Rima Mozart was conducted using a variety of geologic, photographic, and remote sensing data. The apparent source of this rille is located in a highlands unit of known composition and it is hypothesized that thermal and mechanical erosion played an important role in the formation of Rima Mozart. Excellent photographic, topographic, multispectral, and radar data exist for this rille. The preliminary results of an analysis of this data are presented. Photographic data indicates the presence of two volcanic source vents for Rima Mozart: Kathleen and Ann. It is suggested that Rima Mozart, like many other lunar sinuous rilles, was most likely formed by a combination of events. Rima Mozart does follow a pre-existing, dominant NW/SE structural trend suggesting the influence of structural features on the rille, however, the tectonic influence is not the sole source for the formation of the rille, as suggested by the presence of the two source vents and the spatter around Ann. It is suggested that the rille formation began with an explosive eruption at Kathleen which later calmed down to a pulsating, high volume, low-viscosity lava flow. The rapid effusion rate of the magma as well as its high temperature and turbid nature helped carve the sinuous rille into the fractured and structurally weak Apennine Bench Formation underneath. Similar eruptions and subsequent flows were also created at Ann and joined to the main channel by a NE-trending secondary rille.

Coombs, C. R.↗
NASA NTRS1987

Late-stage flood lavas in the Elysium region, Mars

In the southeastern part of the Elysium region is a unit that exhibits little texture and a generally low albedo and that has a very low crater frequency. This unit has been mapped as smooth plains material and previously interpreted as an eolian deposit on the basis of Mariner 9 images. More recently, the unit was mapped as material deposited during a channeling episode. The author interprets the smooth plains unit as being a volcanic deposit composed of low viscosity lava flows: both flood lavas and individual flows. The reasons for these conclusions are given and briefly discussed.

Plescia, J. B.↗
NASA NTRS1987

Finite element models of non-Newtonian crater relaxation

The effects of a non-Newtonian rheology on the profiles of relaxing craters (such as those seen on the surfaces of the icy Galilean and Saturnian satellites) were studied. Two-dimensional finite element simulations of non-Newtonian viscous flow were performed, and the results were compared with those associated with Newtonian rheology. Viscous relaxation of craters in a non-Newtonian medium was significantly different from that in a Newtonian medium. Crater rims are observed to relax at a more rapid rate in a non-Newtonian region as a result of the movement of the low viscosity region to underneath the crater rim after the initial relaxation of the bowl. Significant differences are also found when central depth is plotted as a function of time. For a Newtonian medium, crater relaxation is exponential in form. In contrast, non-Newtonian crater relaxation is initially rapid, in response to the large initial stresses and small viscosities; however, as stresses decrease, this relaxation becomes extremely gradual.

Thomas, Paul J.↗
NASA NTRS1987

Plume formation in the D-double prime-layer and the roughness of the core-mantle boundary

A series of very-high-resolution finite element calculations of plume formation in the D-double prime-layer has been performed for several plausible rheologies and boundary conditions in order to study both the early and later stages of boundary layer development. The results show that plumes are initiated by coalescence of small-scale convective instabilities within the low-viscosity region immediately above the core-mantle boundary (CMB). These instabilities support topographic roughness on the CMB having horizontal scales of 20-50 km and provide a source for scattered P-waves seen as precursors to the phases PKIKP and PKKP. The calculated structure of fully developed plumes emerging from the D-double prime-layer consists of 5-50 cm/yr flow confined to 50-100 km thick vertical conduits. With strongly temperature-dependent viscosity, plumes exhibit time-dependent behavior, including upward propagating solitary conduit waves, which may contribute to episodicity in hotspot volcanism.

Olson, Peter↗
NASA NTRS1985

Seal Technology for Liquid Oxygen (LOX) Turbopumps

Two types of advanced seals for liquid oxygen (LOX) turbopumps were investigated. One was a spiral-groove face seal whose function is to seal high-pressure LOX at the impeller end of the turbopump. The other was a floating-ring, Rayleigh-step, helium buffered seal used to prevent LOX ingress to the turbine side of the unit. For each seal type, two sizes were investigated (50 and 20 mm). A turbine-driven test rig was designed and manufactured, and a test program was completed on the 50 mm floating-ring, Rayleigh-step, helium buffered seal. Significant results were: vaporization in the flow path could cause failure by overheating; therefore, the spiral-groove pumping portion of the seal that provides the fluid film must circulate fluid without disruption if vaporization occurs in the sealing dam. This is successfully accomplished by a pressure-balanced spiral-groove concept that is described. The spiral-groove configuration is affected by turbulence in the fluid film and pressure drops due to fluid inertia at sudden contractions. The net results of these effects are deep grooves, large operating films, and high power loss when compared against seals operating with laminar films. Turbulence and inertia are induced by the high-density and low-viscosity characteristics of LOX. The program clearly pointed out the need to consider system environmental factors such as thermal and centrifugal distortions and rotor vibrations in the seal design.

Shapiro, Wilbur↗
NASA NTRS1989

Polymer solution phase separation: Microgravity simulation

In many multicomponent systems, a transition from a single phase of uniform composition to a multiphase state with separated regions of different composition can be induced by changes in temperature and shear. The density difference between the phase and thermal and/or shear gradients within the system results in buoyancy driven convection. These differences affect kinetics of the phase separation if the system has a sufficiently low viscosity. This investigation presents more preliminary developments of a theoretical model in order to describe effects of the buoyancy driven convection in phase separation kinetics. Polymer solutions were employed as model systems because of the ease with which density differences can be systematically varied and because of the importance of phase separation in the processing and properties of polymeric materials. The results indicate that the kinetics of the phase separation can be performed viscometrically using laser light scattering as a principle means of following the process quantitatively. Isopycnic polymer solutions were used to determine the viscosity and density difference limits for polymer phase separation.

Cerny, Lawrence C.↗
NASA NTRS1991

Experiments On Rotating, Charged Liquid Drops

Report describes experiments in which electrically charged drops of liquid levitated electrostatically and rotated and vibrated acoustically. Discusses possibility of measuring charges of drops of low-viscosity liquids by drop-oscillation method, and measurement of surface tensions of highly viscous liquids by drop-rotation method. Results have implications for containerless processing and modeling of atomic nuclei.

Rhim, Won-Kyu↗
NASA NTRS1991

Milliwatt mixer for small fluid samples

Mixing without excessive heating is sometimes needed for temperature-sensitive fluids. An inexpensive low-frequency electronic filter based on a mechanical resonator to produce a compact (16 mm) and low-power (1-3 mW) mixer for low viscosity fluids is developed. Tests made in air and methanol at room temperature and in fluoroform near its critical point are compared against the predictions of an electromechanical model.

Berg, Robert F.↗
NASA NTRS1991

Production of impact melt in craters on Venus, Earth, and the moon

Impact craters imaged by Magellan clearly show large amounts of flow-like ejecta whose morphology suggests that the flows comprise low-viscosity material. It was suggested that this material may be either turbidity flows or very fine-grained ejecta, flows of ejecta plus magma, or impact melts. The last of these hypotheses is considered. If these flows are composed of impact melts, there is much more melt relative to the crater volume than is observed on the moon. The ANEOS equation of state program was used for dunite to estimate the shock pressures required for melting, with initial conditions appropriate for Venus, Earth, and the moon. A simple model was then developed, based on the Z-model for excavation flow and on crater scaling relations that allow to estimate the ratio of melt ejecta to total ejecta as a function of crater size on the three bodies.

Vickery, A. M.↗
NASA NTRS1991

Static shape and instability of an acoustically levitated liquid drop

Dynamical aspects of a drop drastically flattened by acoustic radiation stress are considered. Its static equilibrium has been studied, starting with a dislike shape and modeling the sound field and the associated radiation stress according to this geometry. It is suggested that, at low viscosity, the ripples are capillary waves generated by the parametric instability excited by the membrane vibration, which is driven by the sound pressure. Atomization occurs whenever the membrane becomes so thin that the vibration is sufficiently intense. Buckling occurs when an existent equilibrium is unstable to a radial oscillation of the membrane because of the Bernoulli effect. The radiation stress at the rim of the flattened drop is also destabilizing and leads to horizontal expansion and subsequent breakup.

Lee, C. P.↗
NASA NTRS1991

Surface-tension-induced mixing following coalescence of initially stationary drops

The momentumless coalescence of drops of the same liquid, separated by an immiscible host, is studied experimentally. Observations show that for low-viscosity drops of unequal sizes, there is considerable mixing following coalescence, with the smaller drop penetrating the larger drop as a vortex. The extreme case of coalescence of a small drop with the bulk of the same liquid at a flat interface with an immiscible liquid is studied in detail. The penetration depths of small drops (1-5 mm) following coalescence are measured and correlated with theoretical predictions. It is found that in the range of the investigation, the penetration depth is proportional to the 5/4 power of drop diameter and inversely proportional to the square root of the drop viscosity.

Anilkumar, A. V.↗
NASA NTRS1992

Momentumless coalescence of drops

The dynamics of mixing and satellite drop formation following the coalescence of initially stationary low-viscosity drops of the same liquid has been investigated using immiscible systems. The main parameters of interest are the drop sizes, the drop viscosity and the host viscosity. For drops of equal sizes there is no mixing following coalescence, which is consistent with that first demonstrated on the Skylab. However, for drops of unequal sizes there is considerable mixing with the smaller drop penetrating the larger drop as a vortex. In the extreme case of coalescence of a small drop with the bulk of the same liquid at a flat interface, the measured penetration depth is found to be proportional to the 5/4 th power of the drop diameter and inversely proportional to the square root of drop viscosity. When the drop and host viscosities are comparable, drop penetration is prematurely terminated by the formation of a satellite drop. However, when the drop diameter ratio (large to small) is below a critical number, satellite drop formation is inhibited and coalescence goes to completion. The influence of drop-host viscosity ratio on this critical diameter ratio has been examined.

Anilkumar, A. V.↗