A simulated study of manual control techniques for the concentrated flight plan of lunar orbit rendezvous - Project Apollo
Simulation of manual control techniques for concentric flight plan of LEM/CSM lunar orbit rendezvous
Simpson, R. W.↗
SEARCH · Search NASA
Results for “manual control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Manual control of the Langley Laboratory telerobotic manipulator
Langley's new Laboratory Teleoperator Manipulator (LTM) provides manual control of seven-degree-of-freedom, replica, force-reflecting, master/slave manipulator arms in two arms simultaneously. This paper describes the LTM, its installation, and plans for a comparable evaluation study of various control input devices to the system. The comparison includes control using the system's master arms, six-degree-of-freedom hand controllers, minimasters, and a force-reflecting hand controller.
Hankins, Walter W., III↗
Studies of multivariable manual control systems - A model for task interference
Model for task interference with pilot performance in multivariable manual control systems
Elkind, J. I.↗
A study of the effect of forcing function characteristics on human operator dynamics in manual control
The effect of the spectrum of the forcing function on the human pilot dynamics in manual control was investigated. A simple compensatory tracking experiment was conducted, where the controlled element was of a second-order dynamics and the forcing function was a random noise having a dominant frequency. The dominant frequency and the power of the forcing function were two variable parameters during the experiment. The results show that the human pilot describing functions are dependent not only on the dynamics of the controlled element, but also on the characteristics of the forcing function. This suggests that the human pilot behavior should be expressed by the transfer function taking into consideration his ability to sense and predict the forcing function.
Washizu, K.↗
The NASA Langley Research Center 0.3-meter transonic cryogenic tunnel T-P/Re-M controller manual
A new microcomputer based controller for the 0.3-m Transonic Cryogenic Tunnel (TCT) has been commissioned in 1988 and has reliably operated for more than a year. The tunnel stagnation pressure, gas stagnation temperature, tunnel wall structural temperature and flow Mach number are precisely controlled by the new controller in a stable manner. The tunnel control hardware, software, and the flow chart to assist in calibration of the sensors, actuators, and the controller real time functions are described. The software installation details are also presented. The report serves as the maintenance and trouble shooting manual for the 0.3-m TCT controller.
Balakrishna, S.↗
Studies of manual control systems progress report no. 6, 19 oct. 1964 - 18 jan. 1965
Biaxial mixed-dynamics tracking task - manual control systems
DYNAMICS↗
Biosystems engineering research. Volume 2 - An investigation of two hybrid computer identification techniques for use in manual control research Final report, 15 Mar. 1969 - 30 Jun. 1970
Two hybrid computer identification techniques for use in manual control research
Jackson, G. A.↗
Eleventh Annual Conference on Manual Control
This volume contains a compilation of written versions of papers presented at the Eleventh Annual Conference on Manual Control in a meeting held at NASA-Ames Research Center, May 21-23, 1975. Five main topics were discussed during this three-day conference. These were covered in sessions on Concurrent Tasks, Physiological Systems, Controls and Displays, Performance/Workload Evaluation, and System Identification. Forty-nine papers are included with presentations on results of analytical studies to develop and evaluate human operator models for a range of control task, vehicle dynamics and display situations; results of tests of physiological control systems and applications to medical problems; and on results of simulator and flight tests to determine display, control and dynamics effects on operator performance and workload for aircraft, automobile and remote control systems.
Source record↗
Multiloop Manual Control of Dynamic Systems
Human interaction with a simple, multiloop dynamic system in which the human's activity was systematically varied by changing the levels of automation was studied. The control loop structure resulting from the task definition parallels that for any multiloop manual control system, is considered a sterotype. Simple models of the human in the task, and upon extending a technique for describing the manner in which the human subjectively quantifies his opinion of task difficulty were developed. A man in the loop simulation which provides data to support and direct the analytical effort is presented.
Hess, R. A.↗
Foot Pedals for Spacecraft Manual Control
Fifty years ago, NASA decided that the cockpit controls in spacecraft should be like the ones in airplanes. But controls based on the stick and rudder may not be best way to manually control a vehicle in space. A different method is based on submersible vehicles controlled with foot pedals. A new pilot can learn the sub's control scheme in minutes and drive it hands-free. We are building a pair of foot pedals for spacecraft control, and will test them in a spacecraft flight simulator.
Love, Stanley G.↗
Time series modeling of human operator dynamics in manual control tasks
A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency responses of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that has not been previously modeled to demonstrate the strengths of the method.
Biezad, D. J.↗
Time Series Modeling of Human Operator Dynamics in Manual Control Tasks
A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency response of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that was previously modeled to demonstrate the strengths of the method.
Biezad, D. J.↗
Flight experience with manually controlled unconventional aircraft motions
A modified YF-16 aircraft was used to flight demonstrate decoupled modes under the USAF Fighter Control Configured Vehicle (CCV) Program. The direct force capabilities were used to implement seven manually controlled unconventional modes on the aircraft, allowing flat turns, decoupled normal acceleration control, independent longitudinal and lateral translations, uncoupled elevation and azimuth aiming, and blended direct lift. This paper describes the design, development, and flight testing of these control modes. The need for task-tailored mode authorities, gain-scheduling and selected closed-loop design is discussed.
Barfield, A. F.↗
A corrosion control manual for rail rapid transit
In 1979, during the planning stage of the Metropolitan Dade County Transit System, the need was expressed for a corrosion control manual oriented to urban rapid transit system use. This manual responds to that need. The objective of the manual is to aid rail rapid transit agencies by providing practical solutions to selected corrosion problems. The scope of the manual encompasses corrosion problems of the facilities of rapid transit systems: structures and tracks, platforms and stations, power and signals, and cars. It also discusses stray electric current corrosion. Both design and maintenance solutions are provided for each problem. Also included are descriptions of the types of corrosion and their causes, descriptions of rapid transit properties, a list of corrosion control committees and NASA, DOD, and ASTM specifications and design criteria to which reference is made in the manual. A bibliography of papers and excerpts of reports and a glossary of frequency used terms are provided.
Gilbert, L. O.↗
A manual-control approach to development of VTOL automatic landing technology.
The operation of VTOL aircraft in the city-center environment will require complex landing-approach trajectories that insure adequate clearance from other traffic and obstructions and provide the most direct routing for efficient operations. As part of a larger program to develop the necessary technology base, a flight investigation was undertaken to study the problems associated with manual and automatic control of steep, decelerating instrument approaches and landings. The study employed a three-cue flight director driven by control laws developed and refined during manual-control studies and subsequently applied to the automatic approach problem. The validity of this approach was demonstrated by performing the first automatic approach and landings to a predetermined spot ever accomplished with a helicopter. The manual-control studies resulted in the development of a constant-attitude deceleration profile and a low-noise navigation system.
Kelly, J. R.↗
Twenty-First Annual Conference on Manual Control
The proceedings of the entitled conference are presented. Twenty-nine manuscripts and eight abstracts pertaining to workload, attention and errors, controller evaluation, movement skills, coordination and decision making, display evaluation and human operator modeling and manual control.
Miller, R. A.↗
Manual control aspects of Space Station docking maneuvers
Due to an increase in spacecraft traffic forecasted for the Space Station era, researchers are investigating manual control and other aspects of docking operations with hopes of increasing safety, productivity, and likelihood of success while decreasing cost. Experiments have been performed which revealed the effect of approach velocity, in-flight anomalies, and control mode. Displays have been designed to enable flight planners to more easily overcome the difficulties presented by orbital mechanics. Improved understanding of human factors in the docking mission and other orbital maneuvers will play a significant role in design tradeoffs concerning thruster size, docking fixture style and mass, and on-board trajectory planning displays. Incorporating both empirical and analytic results into current and future planning of missions occurring not only in earth orbit, but also for missions in lunar and Mars orbit, will expand the performance envelopes of the astronauts who participate in these missions.
Brody, Adam R.↗
The facilitating effects of uncertainty in long-term manual control
A 40-minute tracking task with different disturbance inputs was used to look for the effects of reduced task demands on long term manual control. The expected facilitating effects of task difficulty are hard to find. The decrements in performance over the run are no greater for the easier tasks. The detrimental effects of lower demand appear to be increased relative variability in performance, and possibly reduced performance on transition to unexpected, more difficult tasks. An information measure, including the effects of 'self-induced' uncertainty is developed as a work-load measure. There is a positive correlation between this 'self-induced work-load' and performance decrement for the easiest task, just the opposite of what the facilitation hypothesis would predict.
Verplank, W. L.↗