Search NASA⌕ Search

SEARCH · Search NASA

Results for “mixing enhancement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Multiwave Interactions in Turbulent Jets

Nonlinear wave-wave interactions in turbulent jets were investigated based on the integrated energy of each scale of motion in a cross section of the jet. The analysis indicates that two frequency components in the axisymmetric mode can interact with other background frequencies in the axisymmetric mode, thereby amplifying an enormous number of other frequencies. Two frequency components in a single helical mode cannot, by themselves, amplify other frequency components. But combinations of frequency components of helical and axisymmetric modes can amplify other frequencies in other helical modes. The present computations produce several features consistent with experimental observations such as: (1) dependency of the interactions on the initial phase differences, (2) enhancement of the momentum thickness under multifrequency forcing, and (3) the increase in background turbulence under forcing. In a multifrequency-excited jet, mixing enhancement was found to be a result of the turbulence enhancement rather than simply the amplification of forced wave components. The excitation waves pump energy from the mean flow to the turbulence, thus enhancing the latter. The high frequency waves enhance the turbulence close to the jet exit, but, the low frequency waves are most effective further downstream.

Mankbadi, Reda R.↗
NASA NTRS2000

The Northeast Monsoon's Impact on Mixing, Phytoplankton Biomass and Nutrient Cycling in the Arabian Sea

In the northern Arabian Sea, atmospheric conditions during the Northeast (winter) Monsoon lead to deep convective mixing. Due to the proximity of the permanent pyncnocline to the sea surface, this mixing does not penetrate below 125 m. However, a strong nitracline is also present and the deep convection results in significant nitrate flux into the surface waters. This leads to nitrate concentrations over the upper 100 m that exceed 4 micrometers toward the end of the Monsoon. During the 1994/1995 US JGOFS/Arabian Sea expedition, the mean areal gross primary production over two successive Northeast Monsoons was determined to be 1.35gC/sq m/d. Thus, despite the deep penetrative convection, high rates of primary productivity were maintained. An interdisciplinary model was developed to elucidate the biogeochemical processes involved in supporting the elevated productivity. This model consists of a 1-D mixed-layer model coupled to a set of equations that tracked phytoplankton growth and the concentration of the two major nutrients (nitrate and ammonium). Zooplankton grazing was parameterized by rate constant determined by shipboard experiments. Model boundary conditions consist of meteorological time-series measured from the surface buoy that was part of the ONR Arabian Sea Experiment's central mooring. Our numerical experiments show that elevated surface evaporation, and the associated salinization of the mixed layer, strongly contributes to the frequency and penetration depth of the observed convective mixing. Cooler surface temperatures, increased nitrate entrainment, reduced water column stratification, and lower near-surface chlorophyll a concentrations all result from this enhanced mixing. The model also captured a dependence on regenerated nitrogen observed in nutrient uptake experiments performed during the Northeast Monsoon. Our numerical experiments also indicate that variability in mean pycnocline depth causes up to a 25% reduction in areal chlorophyll a concentration. We hypothesize that such shifts in pycnocline depth may contribute to the interannual variations in primary production and surface chlorophyll a concentration that have been previously observed in this region.

Wiggert, J. D.↗
NASA NTRS2003

Turbulence in Supercritical O2/H2 and C7H16/N2 Mixing Layers

This report presents a study of numerical simulations of mixing layers developing between opposing flows of paired fluids under supercritical conditions, the purpose of the study being to elucidate chemical-species-specific aspects of turbulence. The simulations were performed for two different fluid pairs O2/H2 and C7H16/N2 at similar reduced initial pressures (reduced pressure is defined as pressure divided by critical pressure). Thermodynamically, O2/H2 behaves more nearly like an ideal mixture and has greater solubility, relative to C7H16/N2, which departs strongly from ideality. Because of a specified smaller initial density stratification, the C7H16/N2 layers exhibited greater levels of growth, global molecular mixing, and turbulence. However, smaller density gradients at the transitional state for the O2/H2 system were interpreted as indicating that locally, this system exhibits enhanced mixing as a consequence of its greater solubility and closer approach to ideality. These thermodynamic features were shown to affect entropy dissipation, which was found to be larger for O2/H2 and concentrated in high-density-gradient-magnitude regions that are distortions of the initial density-stratification boundary. In C7H16/N2, the regions of largest dissipation were found to lie in high-density-gradient-magnitude regions that result from mixing of the two fluids.

Bellan, Josette↗
DOE OSTI2026

Climate-eutrophication-anoxia interactions in Late Glacial Soppensee, Switzerland: Forcings, non-linear responses and recovery

Combined effects of climate warming and anthropogenic nutrient loadings lead to lake eutrophication and anoxia globally. Because of chemical feedbacks, lakes under multiple stressors often respond in non-linear ways. However, it remains unclear whether climate change alone can lead to non-linear lake responses in the absence of anthropogenic nutrient disturbances. Here, we investigate the interactions between climate variability, nutrient cycling and trophic state changes, mixing regimes, anoxia and related chemical feedback in a small kettle-hole lake in Switzerland during Late Glacial times (15.2–12.6 cal ka BP), a period known for high-amplitude climate change in pre-anthropogenic times. After its formation during Heinrich Stadial 1 (>15 cal ka BP), Soppensee was oligotrophic and well-mixed. Soppensee became eutrophic and developed anoxia at 14.25 cal ka BP. Phosphorus (P) was released from sediments through the reductive dissolution of Fe-oxyhydroxides, fuelling eutrophication. Eutrophication lagged the Bølling warming (14.65 cal ka BP) by 400 years, suggesting that rising temperatures were not the trigger for eutrophication. Instead, eutrophication responded non-linearly to forest closure (threshold at 76 % arboreal pollen AP), which shielded Soppensee from wind mixing, enhancing lake stratification, anoxia and P release, intensifying eutrophication. These conditions ended during the 200-years cold period of the Aegelsee Oscillation (GI-1d, ca. 14.0 cal ka BP) when the landscape regionally opened (AP<76 %); the lake became well-mixed, oxygenated and P was efficiently sequestered. Throughout the Allerød (13.9–12.8 cal ka BP), enhanced Fe input prompted diagenetic vivianite formation, sequestering P in sediments, naturally remediating lake eutrophication despite closed forests, warm temperatures, lake stratification and anoxia.

Environmental sciences↗
NASA NTRS1999

Parametric Studies of the Ejector Process within a Turbine-Based Combined-Cycle Propulsion System

Performance characteristics of the ejector process within a turbine-based combined-cycle (TBCC) propulsion system are investigated using the NPARC Navier-Stokes code. The TBCC concept integrates a turbine engine with a ramjet into a single propulsion system that may efficiently operate from takeoff to high Mach number cruise. At the operating point considered, corresponding to a flight Mach number of 2.0, an ejector serves to mix flow from the ramjet duct with flow from the turbine engine. The combined flow then passes through a diffuser where it is mixed with hydrogen fuel and burned. Three sets of fully turbulent Navier-Stokes calculations are compared with predictions from a cycle code developed specifically for the TBCC propulsion system. A baseline ejector system is investigated first. The Navier-Stokes calculations indicate that the flow leaving the ejector is not completely mixed, which may adversely affect the overall system performance. Two additional sets of calculations are presented; one set that investigated a longer ejector region (to enhance mixing) and a second set which also utilized the longer ejector but replaced the no-slip surfaces of the ejector with slip (inviscid) walls in order to resolve discrepancies with the cycle code. The three sets of Navier-Stokes calculations and the TBCC cycle code predictions are compared to determine the validity of each of the modeling approaches.

Georgiadis, Nicholas J.↗
NASA NTRS1992

Model free simulations of a high speed reacting mixing layer

The effects of compressibility, chemical reaction exothermicity and non-equilibrium chemical modeling in a combusting plane mixing layer were investigated by means of two-dimensional model free numerical simulations. It was shown that increased compressibility generally had a stabilizing effect, resulting in reduced mixing and chemical reaction conversion rate. The appearance of 'eddy shocklets' in the flow was observed at high convective Mach numbers. Reaction exothermicity was found to enhance mixing at the initial stages of the layer's growth, but had a stabilizing effect at later times. Calculations were performed for a constant rate chemical rate kinetics model and an Arrhenius type kinetics prototype. The Arrhenius model was found to cause a greater temperature increase due to reaction than the constant kinetics model. This had the same stabilizing effect as increasing the exothermicity of the reaction. Localized flame quenching was also observed when the Zeldovich number was relatively large.

Steinberger, Craig J.↗
NASA NTRS1997

Noise Reduction with Lobed Mixers: Nozzle-Length and Free-Jet Speed Effects

Acoustic test results are presented for 1/4th-scaled nozzles with internal lobed mixers used for reduction of subsonic jet noise of turbofan engines with bypass ratio above 5 and jet speeds up to 830 ft/s. One coaxial and three forced lobe mixers were tested with variations in lobe penetration, cut-outs in lobe-sidewall, lobe number and nozzle-length. Measured exit flow profiles and thrusts are used to assist the inferences from acoustic data. It is observed that lobed mixers reduce the low-frequency noise due to more uniformly mixed exit flow; but they may also increase the high-frequency noise at peak perceived noise (PNL) angle and angles upstream of it due to enhanced mixing inside the nozzle. Cut-outs and low lobe penetration reduce the annoying portion of the spectrum but lead to less uniform exit flow. Due to the dominance of internal duct noise in unscalloped, high-penetration mixers their noise is not reduced as much with increase in free-jet speed as that of coaxial or cut-out lobed mixers. The latter two mixers also show no change in PNL over the wide range of nozzle-lengths tested because most of their noise sources are outside the nozzle; whereas, the former show an increase in noise with decrease in nozzle-length.

Mengle, Vinod G.↗
NASA NTRS2002

Aspects of Supercritical Turbulence: Direct Numerical Simulation of O2/H2 and C7H16/N2 Temporal Mixing Layers

Results from Direct Numerical Simulations of temporal, supercritical mixing layers for two species systems are analyzed to elucidate species-specific turbulence aspects. The two species systems, O2/H2 and C7HG16/N2, have different thermodynamic characteristics; thus, although the simulations are performed at similar reduced pressure (ratio of the pressure to the critical pressure), the former system is dose to mixture ideality and has a relatively high solubility with respect to the latter, which exhibits strong departures from mixture ideality Due to the specified, smaller initial density stratification, the C7H16/N2 layers display higher growth and increased global molecular mixing as well as larger turbulence levels. However, smaller density gradients at the transitional state for the O2/H2 system indicate that on a local basis, the layer exhibits an enhanced mixing, this being attributed to the increased solubility and to mixture ideality. These thermodynamic features are shown to affect the irreversible entropy production (i.e. the dissipation), which is larger for the O2/H2 layer and is primarily concentrated in high density-gradient magnitude regions that are distortions of the initial density stratification boundary. In contrast, the regions of largest dissipation in the C7H16/N2 layer are located in high density-gradient magnitude regions resulting from the mixing of the two fluids.

Bellan, J.↗
NASA NTRSDate not supplied

Improving Ocean Reanalyses and ENSO Forecasts By Assimilation of Rain-Corrected Satellite Sea Surface Salinity Using the GMOA S2s Forecast System

The ENSO phenomenon has a significant global socio-economic impact and has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of satellite altimetry and subsurface temperature and salinity from (mostly) Argo help improve the initialization of the thermocline, while satellite SST aids in constraining surface heat-fluxes, leading to improved coupled system sub-seasonal to seasonal forecasts. However, few studies have focused on improving the near-surface density and mixing through satellite sea surface salinity (SSS) assimilation. The few ocean models that assimilate satellite SSS, bias correct to normalize towards the near-surface Argo data for expediency. This assumption is likely inadequate in rainy regions, where buoyant water forms a fresh surface lens. In previous work, we showed that adjusting SSS to bulk salinity (Sb) using the Rain Impact Model (RIM) of Santos-Garcia et al., 2014 improves the near-surface density and mixed layer depth, leading to deeper thermocline and improved NINO3.4 SST forecasts. We now utilize the Soil Moisture and Ocean Salinity rain-corrected (SMOS_RC) SSS, available in SMOS-CATDS products, to represent Sb more accurately at the first model layer (e.g., 5 m). Rather than a diffusivity model as RIM, SMOS_RC uses a statistical correction dependent on Integrated Multi-satellitE Retrievals for GPM (IMERG) rain rates, established on observed SMOS SSS decreases related to Sb in the presence of rain (Supply et al., 2020). For all experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF scheme (Penny et al., 2013). One reanalysis additionally assimilates SMOS SSS data as is, and a separate reanalysis assimilates SMOS_RC. We assess the impact on near-surface and subsurface dynamics by validating against observations and explore how SSS assimilation (SMOS vs SMOS_RC) impacts ENSO forecasts using the NASA GMAO Sub-seasonal to Seasonal coupled forecast system (S2S-v3, Molod et al. 2020). We show that improved estimates of density and near-surface mixing led to more accurate coupled air/sea interaction and better ENSO forecasts. The increased SSS, resulting from the removal of the instantaneous rain effect, modifies the ocean state by enhancing mixing and deepening the thermocline.

Veronica Ruiz Xomchuk↗
NASA NTRS1995

Review of the PDWA Concept for Combustion Enhancement in a Supersonic Air-Breathing Combustor Environment

This paper reviews the design of the Pulsed Detonation Wave Augmentor (PDWA) concept and the preliminary computational fluid dynamics studies that supported it. The PDWA relies on the rapid generation of detonation waves in a small tube, which are then injected into the supersonic stream of the main combustor. The blast waves thus generated are used to stimulate the mixing and combustion inside the main combustor. The mixing enhancement relies on various forms of the baroclinic interaction, where misaligned pressure and density gradients combine to produce vortical flow. By using unsteady shock waves, the concept also uses the Richtmyer-Meshkov effect to further increase the rate of mixing. By carefully designing the respective configurations of the combustor and the detonation tubes, one can also increase the penetration of the fuel into the supersonic air stream. The unsteady shocks produce lower stagnation pressure losses than steady shocks. Combustion enhancement can also be obtained through the transient shock-heating of the fuel-air interface, and the lowering of the ignition delay in these regions. The numerical simulations identify these processes, and show which configurations give the best results. Engineering considerations are also presented, and discuss the feasibility of the concept. Of primary importance are the enhancements in performance, the design simplicity, the minimization of the power, cost, and weight, and the methods to achieve very rapid cycling.

Canbier, Jean-Luc↗
DOE OSTI2022

Modeling ablator grain structure impacts in ICF implosions

High-density carbon is a leading ablator material for inertial confinement fusion (ICF). This and some other ablator materials have grain structure which is believed to introduce very small-scale (~nm) density inhomogeneity. In principle, such inhomogeneity can affect key ICF metrics like fuel compression and yield, by, for example, acting as a seed for instabilities and inducing mix between ablator and fuel. However, assessments of such effects are uncertain due to the difficulty of modeling this small-scale structure in ICF simulations, typically requiring reduced-resolution modeling that scales these features. We present a grain model and show both the impact of de-resolving grains and the complex mixing dynamics such structures can induce. We find that different methods for de-resolving grains can yield both different total deposition of kinetic energy perturbations and different fuel–ablator mixing. We then show a simple-to-implement approach for approximately conserving the deposition of perturbed kinetic energy and demonstrate that, for the present grain model and test cases, this approach yields a reasonably matched time history of mix width between less and more resolved grain models. The simulations here also demonstrate the complex interaction history between grain-induced mixing and instability around the fuel–ablator interface, showing, for example, that the grain-induced perturbations typically trigger instability of conduction-driven density gradients in the DT fuel, enhancing mix penetration early in the acceleration of the shell. Furthermore simulating both microscale and nanoscale grains, we find initial evidence for larger mixing in the microscale case of the present model, despite smaller deposited kinetic energy perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2007

Impact of Air Injection on Jet Noise

The objective of this viewgraph presentation is to review the program to determine impact of core fluidic chevrons on noise produced by dual stream jets (i.e., broadband shock noise - supersonic, and mixing noise - subsonic and supersonic). The presentation reviews the sources of jet noise. It shows designs of Generation II Fluidic Chevrons. The injection impacts shock structure and stream disturbances through enhanced mixing. This may impact constructive interference between acoustic sources. The high fan pressures may inhibit mixing produced by core injectors. A fan stream injection may be required for better noise reduction. In future the modification of Gen II nozzles to allow for some azimuthal control: will allow for higher mass flow rates and will allow for shallower injection angles A Flow field study is scheduled for spring, 2008 The conclusions are that injection can reduce well-defined shock noise and injection reduces mixing noise near peak jet noise angle

Henderson, Brenda↗
NASA NTRS2004

Injection Induced Mixing in Flows Separating From Smooth Surfaces

An analytic model for predicting the effect of unsteady local surface injection on the flow separating from a streamlined body at angle of attack is proposed. The model uses the premise that separation control results from enhanced mixing along the shear layer that develops between the main stream and the fluid in the underlying recirculation zone. High-Reynolds-number asymptotic methods are used to connect the unsteady surface injection to an instability wave propagating on the separating shear layer and then to the large-scale coherent structures that produce the increased mixing. The results is a tool that can guide the choice of fluid-actuator parameters to maximize flow-control effectiveness and may also facilitate computer-based numerical experiments.

Adamczyk, John J.↗
NASA NTRS1993

Control of jet noise

This reports describes experiments conducted at the High-Speed Jet Facility at the University of Southern California on supersonic jets. The goal of the study was to develop methods for controlling the noise emitted from supersonic jets by passive and/or active means. Work by Seiner et al (1991) indicates that eddy Mach wave radiation is the dominant noise source in a heated high speed jet. Eddy Mach radiation is caused by turbulent eddies traveling at supersonic speed in the shear layer of the jet. The convection velocity of the eddies decays with increasing distance from the nozzle exit due to the mixing of the jet stream with the ambient fluid. Once the convection speed reaches subsonic velocities, eddy Mach wave radiation ceases. To control noise, a rapid decay of the convection velocity is desired. This may be accomplished by enhanced mixing in the jet. In this study, small aspect ratio rectangular jet nozzles were tested. A flapping mode was noticed in the jets. By amplifying screech components of the jets and destabilizing the jet columns with a collar device, the flapping mode was excited. The result was a rapid decay of the jet velocity. A reduction in eddy Mach radiation in rectangular supersonic jets may be achieved with this device.

Schreck, Stefan↗
NASA NTRS1990

Turbulence enhancement in free shear flows under multifrequency excitation

The interactions of multifrequency wave-packet with the background turbulence in a round jet are studied. The process explains the mechanisms governing the later stages of the laminar-turbulent transitions as well as the effect of multifrequency excitation on turbulent jets. In a multifrequency-excited jet, mixing enhancement was found to be a result of the turbulence enhancement rather than simply the amplification of forced wave components. The excitation waves pump energy from the mean flow to the turbulence, thus enhancing the latter. The high-frequency wave enhance the turbulence close to the jet exit, but the low-frequency waves are most effective further downstream.

Mankbadi, R. R.↗
NASA NTRS1994

Enhancement of acidic gases in biomass burning impacted air masses over Canada

Biomass-burning impacted air masses sampled over central and eastern Canada during the summer of 1990 as part of ABLE 3B contained enhanced mixing ratios of gaseous HNO3, HCOOH, CH3COOH, and what appears to be (COOH)2. These aircraft-based samples were collected from a variety of fresh burning plumes and more aged haze layers from different source regions. Values of the enhancement factor, delta X/delta CO, where X represents an acidic gas, for combustion-impacted air masses sampled both near and farther away from the fires, were relatively uniform. However, comparison of carboxylic acid emission ratios measured in laboratory fires to field plume enhancement factors indicates significant in-plume production of HCOOH. Biomass-burning appears to be an important source of HNO3, HCOOH, and CH3COOH to the troposphere over subarctic Canada.

Lefer, B. L.↗
NASA NTRSDate not supplied

Progress in Simulated Water Well Performance on Mars

Recent studies of human Mars missions considered the impacts of an abundant supply of in-situ, accessible water on these mission scenarios. Discovery of exposed water ice scarps in Martian mid-latitudes has bolstered the evidence for massive amounts of almost pure water in buried deposits in regions considered candidates for these future human missions. This paper describes progress towards adapting a long-standing terrestrial technique for accessing and extracting water from these mid-latitude sources of ice. This approach relies on mechanical drills to access the ice through overlying debris. Once the ice layer has been reached, a technique known as a Rodriguez Well, or Rodwell, is used to melt the ice, store the resulting water in a subsurface cavity until needed, and then pump the water to the surface for use. Previous work by the authors utilized a computer simulation to predict the performance of a Martian Rodwell. This simulation was originally developed to predict performance in terrestrial Polar Regions. Whereas the basic approach is appropriate for a similar well on Mars, several parameters had been empirically derived and required experiments simulating the Martian environment to determine the values appropriate for a Martian Rodwell simulation. These experiments have now been completed and preliminary values have been determined for the empirical parameters. Test results are consistent with a dimensionless Sh(Ra) correlation developed by Bower and Saylor (2009) and based on lab tests of water evaporating from a pool into a large air chamber. They are also consistent with correlations derived by Ingersoll (1970) and by Hecht (2002), based on natural-convection heat transfer. Each of these earlier correlations found Sh~Ra1/3, with the 1/3rd power characteristic of large Ra where the boundary layer over the pool surface is turbulent. A somewhat surprising result was that this power-law was found to extend into a range of Ra where laminar flow would be expected. Another surprising result was found in that instead of following established correlations for natural-convection heat transfer over flat plates, the dimensionless heat-transfer rates (Nu) were much larger and approximately independent of Ra. This suggests that mass transfer from the pool enhances convective heat transfer, possibly by enhanced mixing in the boundary layer. Although this possibility has been suggested in the literature, if it is proven to be true under these conditions it could play an important role in the use of a Rodwell on Mars, where evaporative mass transfer is enhanced relative to terrestrial wells.

Human Mars Mission↗
NASA NTRS1990

Microgravity acoustic mixing for particle cloud combustors

Experimental and theoretical investigations of acoustic mixing procedures designed to uniformly distribute fuel particles in a combustion tube for application in the proposed Particle Cloud Combustion Experiment (PCCE) are described. Two acoustic mixing methods are investigated: mixing in a cylindrical tube using high frequency spinning modes generated by suitably phased, or quadrature speakers, and acoustic premixing in a sphere. Quadrature mixing leads to rapid circumferential circulation of the powder around the tube. Good mixing is observed in the circulating regions. However, because axial inhomogeneities are necessarily present in the acoustic field, this circulation does not extend throughout the tube. Simultaneous operation of the quadrature-speaker set and the axial-speaker was observed to produce considerably enhanced mixing compared to operation of the quadrature-speaker set alone. Mixing experiments using both types of speakers were free of the longitudinal powder drift observed using axial-speakers alone. Vigorous powder mixing was obtained in the sphere for many normal modes: however, in no case was the powder observed to fill the sphere entirely. Theoretical analysis indicated that mixing under steady conditions cannot fill more than a hemisphere except under very unusual conditions. Premixing in a hemisphere may be satisfactory; otherwise, complete mixing in microgravity might be possible by operating the speaker in short bursts. A general conclusion is that acoustic transients are more likely to produce good mixing than steady state conditions. The reason is that in steady conditions, flow structures like nodal planes are possible and often even unavoidable. These tend to separate the mixing region into cells across which powder cannot be transferred. In contrast, transients not only are free of such structures, they also have the characteristics, desirable for mixing, of randomness and disorder. This conclusion is corroborated by mixing experiments using axial waves.

Pla, Frederic↗