Search NASA⌕ Search

SEARCH · Search NASA

Results for “mixture experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Adsorption kinetics, thermodynamics, and isotherm studies for functionalized lanthanide-chelating resins

Conventional ion exchange resins are widely utilized to remove metals from aqueous solutions, but their limited selectivity precludes dilute ion extraction. This research investigated the adsorption performance of ligand-functionalized resins towards rare earth elements (REE). Functionalized resin particles were synthesized by grafting different ligands (diethylenetriaminepentaacetic dianhydride (DTPADA), phosphonoacetic acid (PAA), or N,N-bis(phosphonomethyl)glycine (BPG)) onto pre-aminated polymeric adsorbents (diameter-0.6 mm). Lanthanide uptake trends were evaluated for the functionalized resins using batch adsorption experiments with a mixture of three REEs (Nd, Gd, and Ho at 0.1–1000 mg/L each). Resin physical-chemical properties were determined by measuring their surface area, ligand concentrations, and acidity constants. The aminated supports contained 4.0 mmol/g primary amines, and ligand densities for the functionalized resins were 0.33 mmol/g (PAA), 0.22 mmol/g (BPG), and 0.42 mmol/g (DTPADA). Kinetic studies revealed that the functionalized resins followed pseudo-second order binding kinetics with rates limited by intraparticle diffusion. Capacity estimates for total REE adsorption based on Langmuir q Max were 0.12 mg/g (amine; ≈ 0.77 µmol/g), 5.0 mg/g (PAA; ≈ 32.16 µmol/g), 3.0 mg/g (BPG; ≈ 19.30 µmol/g), and 2.9 mg/g (DTPADA; ≈ 18.65 µmol/g). Lastly, attaching ligands to the aminated resins greatly improved their REE binding strength and adsorption efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a Structure for Lossless Ion Manipulations (SLIM) High Charge Capacity Array of Traps

Enhancing the sensitivity of low abundance ions in a complex mixture without sacrificing experiment throughput is highly desirable. This work demonstrates a way to greatly improve the sensitivity of ion mobility (IM) selected ions by accumulating them in an array of high-capacity ion traps located inside a novel structures for lossless ion manipulations ion mobility spectrometer (SLIM-IMS) module. The array of ion traps used in this work consisted of seven independently controllable traps. Each trap was 386 mm long and possessed a charge capacity of ~4.5×10 8 charges, with a linear range extending to ~2.5×10 8 charges. Each ion trap could be used to extract a peak (or ions over a mobility range) from an ion mobility separation based on arrival time. Ions could be stored without losses for long times (>100 s) and then released all at once or one trap at a time. It was possible to accumulate large ion populations by extracting and storing ions over repeated IM separations. We report enrichment of up to seven individual ion distributions could be performed using the seven independently controllable ion traps. Additionally, the ion trapping process effectively compressed ion populations into narrow peaks, which provides a greatly improved basis for subsequent ion manipulations. The array of high charge-capacity ion traps provides a flexible addition to SLIM and a powerful tool for IMS-MS applications requiring high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical and thermal conductivities in dense plasmas

Expressions for the electrical and thermal conductivities in dense plasmas are derived combining the Chester-Thellung-Kubo-Greenwood approach and the Kramers approximation. The infrared divergence is removed assuming a Drude-like behaviour. An analytical expression is obtained for the Lorenz number that interpolates between the cold solid-state and the hot plasma phases. An expression for the electrical resistivity is proposed using the Ziman-Evans formula, from which the thermal conductivity can be deduced using the analytical expression for the Lorenz number. The present method can be used to estimate electrical and thermal conductivities of mixtures. Comparisons with experiment and quantum molecular dynamics simulations are done.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen plasma dynamics in the spherical theta pinch plasma target for heavy ion stripping

Due to the superior ability of dense and highly ionised plasmas to ionise penetrating heavy ion beams to degrees beyond those reachable by common gas strippers, many experiments have been performed to find suitable plasma generators for this application. In the field of gas discharges, mainly z-pinch devices have been investigated so far, which are known to be limited by the nonlinear focusing effects of the plasma columns sustaining current and by electrode erosion. The spherical theta pinch has therefore been proposed as a substitution for the z-pinch, promising progress by inductive rather than capacitive coupling and displacement of the outer magnetic field by the dense, diamagnetic discharge plasma. As yet mainly experiments with argon/hydrogen mixture gas have been performed, which is not suitable for the application as a plasma stripper, this paper describes the first detailed analysis of the plasma parameters and dynamics of a hydrogen plasma created by the spherical theta pinch. These include the time integrated and time resolved electron density, the dynamics of the plasma in the discharge vessel, the comparison with the argon dominated plasma, and an outlook to reachable characteristics with similar devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A versatile dual-species Zeeman slower for caesium and ytterbium

We describe the design, construction, and operation of a versatile dual-species Zeeman slower for both Cs and Yb, which is easily adaptable for use with other alkali metals and alkaline earths. With the aid of analytic models and numerical simulation of decelerator action, we highlight several real-world problems affecting the performance of a slower and discuss effective solutions. To capture Yb into a magneto-optical trap (MOT), we use the broad {sup 1}S{sub 0} to {sup 1}P{sub 1} transition at 399 nm for the slower and the narrow {sup 1}S{sub 0} to {sup 3}P{sub 1} intercombination line at 556 nm for the MOT. The Cs MOT and slower both use the D2 line (6{sup 2}S{sub 1/2} to 6{sup 2}P{sub 3/2}) at 852 nm. The slower can be switched between loading Yb or Cs in under 0.1 s. We demonstrate that within a few seconds the Zeeman slower loads more than 10{sup 9} Yb atoms and 10{sup 8} Cs atoms into their respective MOTs. These are ideal starting numbers for further experiments on ultracold mixtures and molecules.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Catalytic Depolymerization and Upgrading of Lignin for Vanillin Production: Cooperative Research and Development Final Report, CRADA Number CRD-14-545

Examine catalytic conversion of lignin using multifunctional catalysts that are able to depolymerize and oxidize lignin to a vanillin-rich stream. Examine separation processes for isolation of vanillin from product mixtures. Conduct preliminary experiments to determine if deconstructed lignin streams can be metabolized by Pseudomonas putida.

09 BIOMASS FUELS↗

Thermal Property Characterization of Molten Salt Reactor–Relevant Salts

The thermochemical and thermophysical properties of molten salt systems are necessary input for the design, licensing, and deployment of molten salt reactor concepts. The thermochemical and thermophysical property measurement capabilities being used and developed at Oak Ridge National Laboratory (ORNL) include liquid density, volumetric thermal expansion, viscosity, vapor pressure, phase behavior, and heat capacity and thermal conductivity measurement capabilities. Properties of eutectic LiF-NaF-KF (FLiNaK) and NaCl-KCl are being measured to validate the measurement techniques to be used to provide data to reactor developers and to better quantify the uncertainty of measurements. This report summarizes the status of thermal conductivity, viscosity, specific heat capacity, and density. A method for property estimation using Redlich Kister expansion is also described. This technique will be used to help validate measured properties and to guide future experiments by targeting mixtures or components for which data are uncertain or lacking.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fluid physics

Three-dimensional viscous disturbances, shock structure of helium-argon mixtures, and magnetohydrodynamic experiments with large interaction parameter

MAGNETOHYDRODYNAMIC STABILITY↗

Shock synthesis of amino acids in simulated primitive environments.

A single pulse shock tube of a uniform bore was used in the experiments. The reaction mixture consisted of 3.3 per cent methane, 11 per cent ethane, and 5.6 per cent ammonia, diluted with ultra-pure argon. The formation of glycine, alanine, valine, and leucine under conditions of shock heating was observed. Thermodynamic relations are discussed together with questions of conversion efficiency.

Bar-Nun, A.↗

Organic molecules in the atmosphere of Jupiter

Organic synthesis in the primitive solar system was simulated by Fischer Tropsch type experiments. Particular attention was given to the formation of lower molecular weight hydrocarbons. In a gas flow experiment, a gas mixture of H2 and CO was introduced into a heated reaction tube at a constant flow rate and passed through a catalyst (powdered Canyon Diablo). The products that emerged were directly analyzed by gas chromatography. The results of 21 runs under various gas mixing rations, reaction temperatures, and gas-catalyst contact times showed the predominance of the saturated hydrocarbon formation at C sub 4 and C sub 5 over the unsaturated ones. Saturate/unsaturate ratios were mostly less than 0.4 and none showed over 0.7.

Ponnamperuma, C. A.↗

Active heat exchange system development for latent heat thermal energy storage

Alternative mechanizations of active heat exchange concepts were analyzed for use with heat of fusion Phase Change Materials (PCM's) in the temperature range of 250 C to 350 C for solar and conventional power plant applications. Over 24 heat exchange concepts were reviewed, and eight were selected for detailed assessment. Two candidates were chosen for small-scale experimentation: a coated tube and shell that exchanger, and a direct contact reflux boiler. A dilute eutectic mixture of sodium nitrate and sodium hydroxide was selected as the PCM from over fifty inorganic salt mixtures investigated. Preliminary experiments with various tube coatings indicated that a nickel or chrome plating of Teflon or Ryton coating had promise of being successful. An electroless nickel plating was selected for further testing. A series of tests with nickel-plated heat transfer tubes showed that the solidifying sodium nitrate adhered to the tubes and the experiment failed to meet the required discharge heat transfer rate of 10 kW(t). Testing of the reflux boiler is under way.

Lefrois, R. T.↗

Laboratory simulations of the pyrolytic release experiments - An interim report

During its operation on Mars the pyrolytic release experiment (PR) detected the fixation of small amounts of CO2 and/or CO. Laboratory simulations of the experimental conditions were made in an attempt to substantiate the previous conclusion that these reactions were chemical rather than biological. After pretreatment and incubation under various conditions, pyrolytic analysis was used to indicate the extent of surface catalyzed conversion of (C-14)O2 or (C-14)O to (C-14)-organic compounds. This abiotic synthesis was detected in experiments with three iron oxides, viz. hematite, magnetite and maghemite. When the incubation atmosphere was supplemented with water vapor, the levels of synthesis were in a range comparable to that detected in the Viking PR tests. An abiotic synthesis was also detected in experiments with a mixture of clays and minerals (Mars analog soil) or with montmorillonite artificially enriched in iron. With either substratum the reaction appeared to be the result of a photocatalytic synthesis of (C-14)-organics from (C-14)O and surface hydroxyl groups. This process was not dependent on the presence of water vapor in the incubation atmosphere. Although a duplication of the Viking data has not been achieved, these findings support the abiotic interpretation of the PR results.

Hubbard, J. S.↗

Run-time parallelization and scheduling of loops

The class of problems that can be effectively compiled by parallelizing compilers is discussed. This is accomplished with the doconsider construct which would allow these compilers to parallelize many problems in which substantial loop-level parallelism is available but cannot be detected by standard compile-time analysis. We describe and experimentally analyze mechanisms used to parallelize the work required for these types of loops. In each of these methods, a new loop structure is produced by modifying the loop to be parallelized. We also present the rules by which these loop transformations may be automated in order that they be included in language compilers. The main application area of the research involves problems in scientific computations and engineering. The workload used in our experiment includes a mixture of real problems as well as synthetically generated inputs. From our extensive tests on the Encore Multimax/320, we have reached the conclusion that for the types of workloads we have investigated, self-execution almost always performs better than pre-scheduling. Further, the improvement in performance that accrues as a result of global topological sorting of indices as opposed to the less expensive local sorting, is not very significant in the case of self-execution.

Saltz, Joel H.↗

STS-73 Flight Day 9

On this ninth day of the STS-73 sixteen day mission, the crew Cmdr. Kenneth Bowersox, Pilot Kent Rominger, Payload Specialists Albert Sacco and Fred Leslie, and Mission Specialists Kathryn Thornton, Catherine 'Cady' Coleman, and Michael Lopez-Alegria are shown performing several of the spaceborne experiments onboard the United States Microgravity Lab-2 (USML-2). The experiments shown include the Surface Tension Driven Convection Experiment (STDCE) and the Protein Crystal Growth (PCG) experiment with different types of solution mixtures used. The imagery of the experiments inside the Spacelab were downlinked to Mission Control with the High-Packed Digital Television (HI-PAC) system.

Source record↗

Saltation Impact as a Means for Raising Dust on Mars

Experiments were conducted under atmospheric pressures appropriate for Earth and Mars to determine the efficiency of sand in saltation as a means for raising dust into the atmosphere under wind speeds which would otherwise be too low for dust entrainment. Experiments involving intimate mixtures of sand and dust (1:1 ratio by mass) showed that after an initial flurry of activity of a few seconds duration, the bed stabilized with little movement of either sand or dust. In contrast, sands set into saltation upwind fro= dust beds were efficient in injecting the dust into suspension, with low-pressure Martian conditions being some five times more efficient than terrestrial conditions. This result is attributed to the higher kinetic energies of the saltating grains on Mars, which is a consequence of the higher velocities of the grains. These results suggest that sands saltating across dust beds on Mars are an effective means for setting dust into suspension.

Greeley, Ronald↗

Did the Pre-RNA World Rest Upon DNA Molecules?

The isolation of a DNA sequence that catalyzes the ligation of oligodeoxynucleotides via the formation of 3' - 5' phosphodiester linkage significance in selection experiments has been reported. Ball recently used this to discuss the possibility that natural DNA molecules may have formed in the primitive Earth leading to the origin of life. As noted by Ferris and Usher, if metabolic pathways evolved backwards, it could be argued that the biosynthesis of 2-deoxyribose from ribose suggests that RNA came from DNA. As summarized elsewhere, there are several properties of deoxyribose which could be interpreted to support the possibility that DNA-like molecules arose prior to the RNA world. For example, 2-deoxyribose is slightly more soluble than ribose (which may have been an advantage in a drying pool scenario), may have been more reactive under possible prebiotic conditions (it forms a nucleoside approx. 150 times faster than ribose with the alternative base urazole at 25 C), while it decomposes in solution (approximately 2.6 times more slowly than ribose at 100 C). Other advantages of DNA over RNA are that it has one fewer chiral center, has a greater stability at the 8.2 pH value of the current oceans, and does not has the 2'5' and 3'5' ambiguity in polymerizations. Yet, there is strong molecular biological and biochemical evidence that RNA was featured in the biology well before the last common ancestor. The presence of sugar acids, including both ribo- and deoxysugar acids, in the 4.6 Ga old Murchison meteorite suggest that both may have been available in the primitive Earth, derived from the accretion of extraterrestrial sources and/or from endogenous processes involving formaldehyde and its derivatives. However, the abiotic synthesis of deoxyribose, ribose, and other sugars from glyceraldehyde and acetaldehyde under alkaline conditions is inefficient and unespecific. Although sugars are labile compounds, the role of cyanamide or borate minerals in the stabilization of the cyclic forms of ribose and other pentoses has recently been demonstrated. Nonetheless, the assumption either RNA or DNA was the first genetic material needs to be supplemented by laboratory models demonstrating that the prebiotic synthesis of activated beta-D-(deoxy)ribonucleotides and their polymers was feasible. As of today such evidence is lacking, and there is no convincing synthesis of any nucleotide, since all model experiments produce complex mixtures of products in which there is no preferential synthesis of chiral D-nucleotides. This strongly suggests that both DNA and RNA may have been preceded by pairing structures much simpler than extant nucleic acids. It is doubtful that DNA molecules, or indeed other (de0xy)ribofuranoid oligonucleotides formed the basis of these as yet undescribed pre-RNA worlds.

Lazcano, Antonio↗

Racemization and the origin of optically active organic compounds in living organisms

The organic compounds synthesized in prebiotic experiments are racemic mixtures. A number of proposals have been offered to explain how asymmetric organic compounds formed on the Earth before life arose, with the influence of chiral weak nuclear interactions being the most frequent proposal. This and other proposed asymmetric syntheses give only sight enantiomeric excess and any slight excess will be degraded by racemization. This applies particularly to amino acids where half-lives of 10(5)-10(6) years are to be expected at temperatures characteristic of the Earth's surface. Since the generation of chiral molecules could not have been a significant process under geological conditions, the origins of this asymmetry must have occurred at the time of the origin of life or shortly thereafter. It is possible that the compounds in the first living organisms were prochiral rather than chiral; this is unlikely for amino acids, but it is possible for the monomers of RNA-like molecules.

NASA Discipline Exobiology↗

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan's stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30-160 K) were collected from 50 cm1 to 11,700 cm1 (200-0.85 m). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in pre- viously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and < 140 K. Our findings corro- borate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan's observed Haystack emission feature. In order to understand and identify the Haystack cloud, we have initiated co-de- position experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited ternary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co- condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan's stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Nna-Mvondo, Delphine↗