SEARCH · Search NASA

Results for “moisture content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Moisture dependence of positron lifetime in Kevlar-49

Because of filamentary character of Kevlar-49 aramid fibers, there is some concern about the moisture uptake and its effect on plastic composites reinforced with Kevlar-49 fibers. As part of continuing studies of positron lifetime in polymers, we have measured positron lifetime spectra in Kevlar-49 fibers as a function of their moisture content. The long lifetime component intensities are rather low, being only of the order of 2-3 percent. The measured values of long component lifetimes at various moisture levels in the specimens are as follows: 2072 +/- 173 ps (dry); 2013 +/- 193 ps (20.7 percent saturation); 1665 +/- 85 ps (25.7 percent saturation); 1745 +/- 257 ps (32.1 percent saturation); and 1772 +/- 217 ps (100 percent saturation). It is apparent that the long component lifetime at first decreases and then increases as the specimen moisture content increases. These results have been compared with those inferred from Epon-815 and Epon-815/K-49 composite data.

Singh, Jag J.↗

NASA NTRS1982

A numerical simulation of soil temperature and moisture variations for a bare field

The diurnal variations of soil temperature and moisture content were simulated for a bare agricultural field in the San Joaquin Valley in California. The simulation pertained to the first 72 hours of drying, from saturation, of a sandy, clay loam soil. The results were compared with measurements of soil temperature and moisture content made at the field. Calculated and measured values of soil temperature trends agreed in general, but model results of moisture trends did not replicate observed diurnal effects evident at depths 4 centimeters or more below the surface.

Schieldge, J. P.↗

NASA NTRS1974

Hydrologic applications of ERTS-1 data collection system in central Arizona

The Earth Resources Technology Satellite (ERTS-1) Data Collection System (DCS) was used to relay hydrologic data (streamflow rates, precipitation amounts, soil and air temperature, and snow-moisture content) from remote sites in central Arizona to those responsible for reservoir management. The ERTS-DCS was utilized to furnish near-real time information on snow-moisture content and streamflow rates to the Salt River Project for use in the management and operation of reservoirs on the Salt and Verde Rivers. The Salt River Project, aided by near-real time hydrologic data furnished by both microwave and ERTS-telemetry, was successful in predicting the volume of runoff into the reservoirs. Serious flooding in the downstream Phoenix metropolitan area was prevented by prudent water management.

Schumann, H. H.↗

NASA NTRS1976

Moisture transport in composites

The moisture distribution and moisture content of composite materials exposed to humid air or to water are discussed. Expressions are presented for estimating the weight gain of both single and multilayered composites when the moisture content and the temperature of the environment are constant. The parameters needed for solving problems in the time varying environmental conditions are specified, and a numerical approach for the solution of such problems is indicated.

Springer, G. S.↗

NASA NTRS1974

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. Data from five Skylab passes were combined to give a composite relationship between the S194 antennae temperature and soil moisture content in the surface to one inch layer. The five data sets were comparable and resulted in a correlation coefficient of -0.97. The regression equation was used to predict soil moisture content across the United States for one particular pass on August 5, 1973.

Eagleman, J. R.↗

NASA NTRS1997

Use of Ultrasonic Technology for Soil Moisture Measurement

In an effort to improve existing soil moisture measurement techniques or find new techniques using physics principles, a new technique is presented in this paper using ultrasonic techniques. It has been found that ultrasonic velocity changes as the moisture content changes. Preliminary values of velocities are 676.1 m/s in dry soil and 356.8 m/s in 100% moist soils. Intermediate values can be calibrated to give exact values for the moisture content in an unknown sample.

Choi, J.↗

NASA NTRS1997

Analyses of 1994 Typhoons in the Taiwan Region Using Satellite Data

Taiwan is situated in the prevalent typhoon track in the northwestern Pacific. On average, about one third of the island total annual precipitation is due to typhoons, with the other two third being contributed by the summer monsoon, or Meiyu, and wintertime large scale frontal rainfall. While the typhoons bring the needed moisture for agricultural consumption and industrial utilization, heavy rainfall associated with typhoons often result in large scale flooding and land slide. The prediction of the typhoon track and its severity is therefore a high priority topic both for operation and research. The severity of a typhoon can be defined in terms of the wind strength and the moisture content. The Special Sensor Microwave/Imager (SSM/I) on board of the Defense Meteorological Satellite Program (DMSP) satellites measures microwave radiation in 19.4, 22.2, 37, and 85.5 GHz. These measurements provide an opportunity to estimate parameters such as surface wind speed, water vapor and cloud water contents, and rainfall rate over oceans. In 1994, Taiwan experienced an above normal frequency of typhoon hits, five typhoons hit the island in two months. In this report, estimates of the moisture content of these typhoons are made based on the SSM/I measurements. An assessment of the relative strength of the typhoons are made with analyzed data.

Chang, A. T. C.↗

NASA NTRS1990

Implementation of Sensor and Control Designs for Bioregenerative Systems

The goal of the Spring 1990 EGM 4001 Design class was to design, fabricate, and test sensors and control systems for a closed loop life support system (CLLSS). The designs investigated were to contribute to the development of NASA's Controlled Ecological Life Support System (CELSS) at Kennedy Space Center (KSC). Designs included a seed moisture content sensor, a porous medium wetness sensor, a plant health sensor, and a neural network control system. The seed group focused on the design and implementation of a sensor that could detect the moisture content of a seed batch. The porous medium wetness group concentrated on the development of a sensor to monitor the amount of nutrient solution within a porous plate incorporating either infrared reflectance or thermal conductance properties. The plant health group examined the possibility of remotely monitoring the health of the plants within the Biomass Production Chamber (BPC) using infrared reflectance properties. Finally, the neural network group concentrated on the ability to use parallel processing in order to control a robot arm and analyze the data from the health sensor to detect regions of a plant.

Rodriguez, Pedro R.↗

NASA NTRS1974

Moisture detection from Skylab

Five sets of data are described which relate the Skylab S193 radiometer and scatterometer data and S194 L-band radiometer temperature to soil moisture content of test sites in Texas and Kansas. Although the analysis of the S193 data are incomplete, analysis of the L-band radiometer data show that it is highly correlated with the soil moisture content of the surface layers of soil. Various correlations and predictions based on the relationship are described in this paper.

Eagleman, J. R.↗

NASA NTRS2001

NASA Rodent Foodbar: Long Term Effects in Swiss Webster Mice

Swiss Webster male and female mice (150 of each) were fed NASA Rodent Foodbar for more than 110 days to test the diet's nutritional adequacy for use in future long-term studies aboard the International Space Station. Mice were grouped three to a cage (one cage = one sample) and cages were assigned to either Foodbar or Purina Chow #5001 (control) diet groups. Body weights, food intake, and water intake were obtained throughout the study. There were no significant differences in body weights between male Foodbar fed and Chow fed males (p=0.58), and at 15 weeks into the female mouse study there appear to be no significant body weight differences. Both male and female Foodbar fed groups consumed more food and less water than their Chow controls, both factors thought to be attributable to the high moisture content of the Foodbars (26% versus 10% for Chow). All differences in gross food and water consumption had p-values of less than 0.01. When food and water intake were adjusted for the moisture content in the food, both male and female Foodbar fed animals consumed less food, but still had a lower water intake rate than their controls. (p is less than 0.01). Preliminary analysis on blood samples from male and female halfway point dissections suggests differences in glucose and fat metabolism. In both male and female Foodbar fed animals, blood glucose values were significantly lower (p is less than 0.01) but there were no significant differences in cholesterol levels (p=0.51). In Foodbar fed females, triglycerides were significantly higher (p is less than 0.01). These data suggest that Foodbars allow for normal growth in Swiss Webster mice, but affect some blood chemistry parameters.

Santiago, D. L.↗

NASA NTRS1977

Surface materials of the Viking landing sites

In the present paper, the soil characteristics at the Viking sites are discussed in terms of bulk density, particle size, angle of internal friction, cohesion, and moisture content. At the Viking Lander-1 site, there is a relatively weak drift material, along with more cohesive materials of a rocky area, and rocks. A variety of materials are present also at the Lander-2 site. Moisture content is low as compared to terrestrial soils. Current estimates of some of the physical properties are tabulated and discussed.

Moore, H. J.↗

NASA NTRS1993

Soil moisture retrieval in the Oberpfaffenhofen testsite using MAC Europe AIRSAR data

Soil moisture content is an important parameter in many disciplines of science like hydrology, meteorology, agriculture and others. Microwave remote sensing technique has a high potential in measuring the dielectric constant of soils, which is strongly governed by the soil moisture. Much excellent work has been done on investigating the relationship between backscattering coefficient and soil moisture. Most of these studies are measured in a laboratory or are carried out with a multitemporal data set. This means, that the variation in the backscattering coefficient is only related to the soil moisture because all other parameters influencing the backscattering like surface roughness, vegetation cover, plant geometry, phenology of plants and row direction are kept constant. In this study the sensitivity of the backscattering coefficient to soil moisture of corn fields is investigated. In the framework of the MAC-Europe Campaign in June 1991, the NASA/JPL three-frequency polarimetric AIRSAR system collected data over the test site Oberpfaffenhofen. The AIRSAR campaign in Oberpfaffenhofen was complemented with intensive ground truth measurements. The sampled corn fields are nearly in the range of the same incidence angle (approximately 20 deg) and belong to different soil types. The evaluation was carried out at a single data set. The results show that the backscattering, measured at P-band, can be described with only two parameters very well. The main parameter influencing the backscattering is the soil moisture content; the second subordinated parameter is the row direction.

Wever, Tobias↗

NASA NTRS1984

Soil moisture from temperature measurements at the Earth's surface, update

Soil moisture budgets at the Earth's surface were investigated based on soil and atmospheric temperature variations. A number of data sets were plotted and statistically analyzed in order to accentuate the existence and the characteristics of mesoscale soil temperature extrema variations and their relations to other parameters. The correlations between diurnal temperature extrema for air and soil in drought and non-drought periods appear to follow different characteristic patterns, allowing an inference of soil moisture content from temperature data. The recovery of temperature extrema after a precipitation event also follows a characteristic power curve rise between two limiting values which is an indicator of evaporation rates. If these indicators are applied universally to regional temperature data, soil moisture content or drought conditions can be inferred directly from temperature measurements.

Welker, J. E.↗

NASA NTRS1987

Measuring and modeling the backscattering cross section of a leaf

Leaves are a significant feature of any vegetation canopy, and for remote sensing purposes it is important to develop an effective model for predicting the scattering from a leaf. From measurements of the X band backscattering cross section of a coleus leaf in varying stages of dryness, it is shown that a uniform resistive sheet constitutes such a model for a planar leaf. The scattering is determined by the (complex) resistivity which is, in turn, entirely specified by the gravimetric moisture content of the leaf. Using an available asymptotic expression for the scattering from a rectangular resistive plate which includes, as a special case, a metallic plate whose resistivity is zero, the computed backscattering cross sections for both principal polarizations are found to be in excellent agreement with data measured for rectangular sections of leaves with different moisture contents. If the resistivity is sufficiently large, the asymptotic expressions do not differ significantly from the physical optics ones, and for naturally shaped leaves as well as rectangular sections, the physical optics approximation in conjunction with the resistive sheet model faithfully reproduces the dominant feataures of the scattering patterns under all moisture conditions.

Senior, T. B. A.↗

NASA NTRS1978

Prediction of moisture and temperature changes in composites during atmospheric exposure

The effects of variations in diffusion coefficients, surface properties of the composite, panel tilt, ground reflection, and geographical location on the moisture concentration profiles and average moisture content of composite laminates were studied analytically. A heat balance which included heat input due to direct and sky diffuse solar radiation, ground reflection, and heat loss due to reradiation and convection was used to determine the temperature of composites during atmospheric exposure. The equilibrium moisture content was assumed proportional to the relative humidity of the air in the boundary layer of the composite. Condensation on the surface was neglected. Histograms of composite temperatures were determined and compared with those for the ambient environment.

Tompkins, S. S.↗

NASA NTRS1980

Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials

The paper presents results of experiments in which the thermal expansion and swelling behavior of an epoxy resin system and two graphite/epoxy composite systems exposed to water were measured. It was found that the cured epoxy resin swells by an amount slightly less than the volume of the absorbed water and that the swelling efficiency of the water varies with the moisture content of the polymer. Additionally, the thermal expansion of cured epoxy resin that is saturated with water is observed to be more than twice that of dry resin. Results also indicate that cured resin that is saturated with 7.1% water at 95 C will rapidly increase in moisture content to 8.5% when placed in 1 C water. The mechanism for this phenomenon, termed reverse thermal effect, is described in terms of a slightly modified free-volume theory in conjunction with the theory of polar molecule interaction. Nearly identical behavior was observed in two graphite/epoxy composite systems, thus establishing that this behavior may be common to all cured epoxy resins.

Adamson, M. J.↗

NASA NTRS1981

Survey of in-situ and remote sensing methods for soil moisture determination

General methods for determining the moisture content in the surface layers of the soil based on in situ or point measurements, soil water models and remote sensing observations are surveyed. In situ methods described include gravimetric techniques, nuclear techniques based on neutron scattering or gamma-ray attenuation, electromagnetic techniques, tensiometric techniques and hygrometric techniques. Soil water models based on column mass balance treat soil moisture contents as a result of meteorological inputs (precipitation, runoff, subsurface flow) and demands (evaporation, transpiration, percolation). The remote sensing approaches are based on measurements of the diurnal range of surface temperature and the crop canopy temperature in the thermal infrared, measurements of the radar backscattering coefficient in the microwave region, and measurements of microwave emission or brightness temperature. Advantages and disadvantages of the various methods are pointed out, and it is concluded that a successful monitoring system must incorporate all of the approaches considered.

Schmugge, T. J.↗

NASA NTRS1977

Analytical study of effects of surface and environmental thermal properties on moisture in composites

The influence of surface and environmental thermal properties on the moisture absorption in fiber-reinforced polymeric-resin-matrix composite materials which have been subjected to convection and solar radiation was studied. Predicted moisture contents based on the conditions at the heated surface and in the ambient air were compared for both short term and long term exposures over a wide range of values for emittance, solar absorptance, convective heat transfer coefficient, solar radiation, ambient temperature, and orientation of the surface with respect to the sun. The calculations showed that absorptance and heat transfer coefficient have significant effects on the moisture content.

Tompkins, S. S.↗