Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Optical fields in porous polylactide matrices

Optical fields induced by laser light inside porous polymer matrices (scaffolds) under stimulating effect on cells are investigated. The spectra of light scattering coefficients and anisotropy factors of porous polylactide scaffolds in the visible and near-IR ranges are determined by numerical simulation based on experimental data obtained using a double integrating sphere. Studies are conducted for dry and wet scaffolds fabricated by supercritical fluid foaming and surface-selective laser sintering. The Monte Carlo method is used to calculate the fluence rate distribution under the assumptions of the Henyey – Greenstein phase scattering function and the model phase function of scattering on spherical cavities. It is shown that th e fluence rate distribution mainly depends on the scattering coefficient and the mean cosine of the deflection angle (g-factor). The results obtained are of great practical importance for tissue engineering based on the use of polymeric porous scaffolds with cells to replace tissue defects; they can be used to determine the dose range for laser stimulation of cells. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Using block-copolymer nanolithography as a tool to sensitively evaluate variation in chemical dry etching rates of semiconductor materials with sub-5 nm resolution

Ion implantation is a robust and established method to customize the electronic properties of Si. However, fabricating doped, ultrafine semiconductor nanostructures can be challenging. Ion implantation has well-established effects on the dry etch rates of Si, which becomes increasingly consequential as the target dimension shrinks below a few tens of nanometers. While dry etching arrays of block copolymer-templated nanoscale holes (pitch = 37.5 nm, diameter ~25 nm) into p-type, n-type, and undoped Si, we observed that the lateral etch rate was notably larger for the n-type regions than p-type or undoped regions. By doing image analyses on high resolution electron micrographs of the nanostructured hole arrays, we were able to extract the porosity and average radii of the holes with subnanometer sensitivity and compare the relative etch rates between different doping conditions. We found that degenerately doped n-type silicon consistently etches between approximately 17% and 27% faster in the lateral direction than p-type Si, resulting in significantly larger porosity and, consequently, less mechanical stability. Here, we demonstrate that top-down dimensional analysis of a densely packed porous nanostructure is a robust method for assessing extremely small differences in the lateral, chemical etch rate of doped Si to a degree of sensitivity that was previously unachievable. The minute, dense-packed nature of block copolymer self-assembled nanostructures is shown to be ideal for this application. This proposed method could be useful for designing fabrication processes for heterogeneous nanostructures, as slight dry etch rate variations that may be within process tolerance at the micrometer-scale appear to have nontrivial consequences at the nanometer scale.

42 ENGINEERING↗
DOE OSTI2025

Systematic study of radioluminescence and light propagation effects in scintillating nanoguide materials

Nanoguide optical waveguides are thermally processed materials based on polymers that have different refractive indices. Scintillating versions of these materials have been under development since 2019 and feature PMMA as the low refractive index constituent and Organic Glass Scintillator-polymer blends as the high index component. Characterization efforts to date have focused on the functional characteristics of nanoguide pertaining to its envisioned use in high-resolution transmission radiography applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanical Actuation via Homeomorphic Transformations of Topological Solitons within Polymer Coatings

Abstract Topological solitons are currently under investigation for their exotic properties, especially in nonlinear physics, optics, and material sciences. However, challenges of robust generation and limited stability over time have hindered their practical uses. To address this issue, an approach is developed to form structured arrays of solitons in films of polymerizable liquid crystals. Their complex molecular architecture is preserved by in situ photopolymerization forming a stable liquid crystal network. Most excitingly, their properties are advanced to include responsiveness functions. When thermally actuated, these topological solitons mediate the reconfiguration of surface topographies. Complex shape changes occur depending on the intrinsic complex spatial distribution of the director, which may even lead to full shape inversion and topographical changes as high as ≈40% of the initial thickness. Conversely, the shape changes provide information on the initial director profile, which is consistent with the mathematical model. The soliton‐containing polymer coatings are applicable in multiple domains, ranging from tunable optics to haptics, and from shape‐coupled sensing systems to temperature‐coupled heat management.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Use of a Multiple Hydride Donor To Achieve an n-Doped Polymer with High Solvent Resistance

We report the ability to insolubilize doped semiconducting polymer layers can help enable the fabrication of efficient multilayer solution-processed electronic and optoelectronic devices. Here, we present a promising approach to simultaneously n-dope and largely insolubilize conjugated polymer films using tetrakis[{4-(1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)phenoxy}methyl]methane (tetrakis-O-DMBI-H), which consists of four 2,3-dihydro-1H-benzoimidazole (DMBI-H) n-dopant moieties covalently linked to one another. Doping a thiophene-fused benzodifurandione-based oligo(p-phenylenevinylene)-co-thiophene polymer (TBDOPV-T) with tetrakis-O-DMBI-H results in a highly n-doped film with bulk conductivity of 15 S cm –1 . Optical absorption spectra provide evidence for film retention of ~93% after immersion in o-dichlorobenzene for 5 min. The optical absorption signature of the charge carriers in the n-doped polymer decreases only slightly more than that of the neutral polymer under these conditions, indicating that the exposure to solvent also results in negligible dedoping of the film. Moreover, thermal treatment studies on a tetrakis-O-DMBI-H-doped TBDOPV-T film in contact with another undoped polymer film indicate immobilization of the molecular dopant in TBDOPV-T. This is attributed to the multiple electrostatic interactions between each dopant tetracation and up to four nearby anionic doped polymer segments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Recent Progress in Transparent Conductive Materials for Photovoltaics

Transparent conducting materials (TCMs) are essential components for a variety of optoelectronic devices, such as photovoltaics, displays and touch screens. In recent years, extensive efforts have been made to develop TCMs with both high electrical conductivity and optical transmittance. Based on material types, they can be mainly categorized into the following classes: metal oxides, metal nanowire networks, carbon-material-based TCMs (graphene and carbon nanotube networks) and conjugated conductive polymers (PEDOT:PSS). This review will discuss the fundamental electrical and optical properties, typical fabrication methods and the applications in solar cells for each class of TCMs and highlight the current challenges and potential future research directions.

14 SOLAR ENERGY↗
DOE OSTI2023

Exciton Binding Energy in Organic Polymers: Experimental Considerations and Tuning Prospects

Discrepancies in reported values of exciton binding energy (E b ) for organic semiconductors (OSs) necessitate a comprehensive study. Traditionally, E b is defined as the difference between the transport gap (E t ) and the optical gap (E opt ). Here, the E b values of PBnDT‐TAZ polymer variants are determined using two commonly employed methods: a combination of ultraviolet photoemission spectroscopy and low‐energy inverse photoemission spectroscopy (UPS‐LEIPS) and solid‐state cyclic voltammetry (CV). E b values obtained by UPS‐LEIPS show low dispersion and no clear correlation with the polymer structure and thedielectric properties. In contrast, CV reveals a larger dispersion (200 meV‐1 eV) and an apparent qualitative E b ‐molecular structure correlation, as the lowest E b values are observed for oligo‐ethylene glycol side chains. This discrepancy is discussed by examining the implications of the traditional definition of E b . Additionally, the impact of both intrinsic and extrinsic factors contributing to the derived experimental values of E t is discussed. The differences in intrinsic and extrinsic factors highlight the context‐dependent nature of measurement when drawing global conclusions. Notably, the observed E b trend derived from CV is not intrinsic to the pure materials but likely linked to electrolyte swelling and associated changes in dielectric environment, suggesting that high‐efficiency single‐material organic photovoltaics with low E b may be possible via high dielectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Conducting polymer-based electrochemical sensors: Progress, challenges, and future perspectives

Conducting polymers are promising due to their unique properties, such as excellent electrical and optical properties, physical and chemical stability, high conductivity, and effective redox properties with high-temperature stability and biocompatibility. Due to these properties, conducting polymers are useful in diverse applications like sensors, batteries, oil industries, biosensors, biomedicines, catalysis, cancer treatment, etc. This review article aims to discuss the recent trends and analysis of conducting polymer-based electrochemical sensors in diverse areas with all required sensor characteristics, such as the derived limit of detection, utilized techniques for the sensing analysis and derived linear dynamic range with the stability of the sensors. Conducting polymers and their nanocomposites-based electrochemical sensors have demonstrated exceptional capabilities towards detecting various biomolecules, heavy metals, pesticides, and viruses like SARS-COV-2. Incorporation of redox mediators, use of conducting hydrogels, and molecular imprinting are promising strategies for better performance of the derived sensor. The article has demonstrated the existing challenges and limitations and provided solutions in the field. In the future, conducting polymers-based electrochemical sensors can be utilized in wearable sensors and integrated with IoT devices for better reach in real-time applications. They can also be made more accessible with precise control and data output by following specific methodologies. Utilizing green and sustainable conducting polymers can be crucial in advancing eco-friendly practices in the future. Conducting polymer-based electrochemical sensors has affectivity in neurochemical and pathogen sensing, which is essential for brain function and mental health.

42 ENGINEERING↗
DOE OSTI2024

Waveguides for neurostimulation in the cochlea

Introduction Optical stimulation has been suggested for neural stimulation to improve cochlear implants. Light allows for more spatially selective activation of neuron populations than electrical current, offering more independent frequency bands along the spiral ganglion. These bands are available to encode acoustic information with anticipated better frequency resolution, improving cochlear implant user performance in noisy listening environments, tonal languages, and music perception. Methods Optical cochlear implants (oCIs) can deliver light either directly via small emitters within the cochlea or via waveguides from external optical sources. We investigated three waveguide designs made from OrmoComp ® , a polymer that cures through ultraviolet (UV) radiation. Waveguides were fabricated via injection molding and coated using dip-coating or thermal reflow, or through aspiration of OrmoComp ® into polyimide tubing that served as the cladding of the waveguide. The choice of fabrication technique directly determined the waveguides' total diameter: thermal reflow yielded ≈940 μm, dip-coating produced ≈306 μm, and aspiration resulted in ≈132 μm core diameter waveguides. Given the human cochlea's small size, we focused on analyzing the 306-μm and 132-μm waveguides, evaluating their optical performance (propagation and bending losses) and mechanical properties (bending stiffness and insertion forces). Furthermore, we evaluated some of these designs in in-vivo guinea pigs experiments. Results For the 100-μm core diameter waveguides, the propagation losses were 12.34 ± 1.26, 1.18 ± 0.88, 1.49 ± 0.58, and 3.43 ± 0.68 dB/cm at 534, 1,375, 1,460, and 1,550 nm, respectively. The respective bending losses at a 2 mm radius of curvature were 5.50 ± 1.32, 0.56 ± 0.26, 0.79 ± 0.18, and 0.64 ± 0.23 dB, and at 1 mm 8.54 ± 1.30, 2.05 ± 0.84, 2.11 ± 0.50, and 1.44 ± 0.37 dB. The bending stiffness of a 1 mm segment of the 100-μm-diameter waveguides was 18.9 ± 2.2 N/m. Insertion forces for the 100-μm-diameter waveguides into an acrylic human-size scala tympani model were < 25 mN. For the waveguides with 306 and 940 μm total diameter, the propagation losses ranged between 0.43 and 2.40 dB/cm at 534, 680, 1,375, and 1,550 nm, between 2.19 and 3.78 dB/cm at 450 and 1,460 nm. Bending losses for 360 degrees at 1,375 nm were 5.0, 2.4, and 0.46 for a bending radius of 2.5-, 3-, and 4-mm. Discussion Our study demonstrated that the polymer OrmoComp ® is suitable for fabricating waveguides to transmit near-infrared radiation. In-vivo experiments showed optically evoked auditory responses originating from optical stimulation in the guinea pigs' first cochlear turn while radiation was delivered. Incoming experiments will focus on evaluating long-term performance of these waveguides in guinea pigs and cats. This study will be designed to provide insights into the waveguides' performance and biocompatibility over extended periods, essential for their potential clinical application in future oCIs.

Kim, Matthew↗
DOE OSTI2021

Damage detection through Förster Resonance Energy Transfer in mechanoresponsive polymer nanocomposites

Polymer nanocomposites offer design solutions to control and tune optical, conductive, topological, and thermomechanical properties of advanced and multifunctional materials. Because of their ubiquitous nature, methodologies to diagnose failure or structural changes in the nanocomposites are of significant interest. Herein, we report a nanocomposite system loaded with quantum dots and coumarin-modified carbon nanotubes that transduce mechanical force into fluorescence at a strain, for the first time, as low as 7.5%. Our comprehensive studies detail the optical, morphological, and thermomechanical properties of these nanocomposites to establish the fundamental reason behind the activation of fluorescence. Here our results indicate that bare carbon nanotubes can irreversibly quench the fluorescence from quantum dots and that the coumarin-modified carbon nanotubes mitigate the quenching through Förster Resonance Energy Transfer. Next, the application of force to the sample changes the quantum dot-carbon nanotube spacing as well as the carbon nanotube morphology to activate fluorescence in the nanocomposite. Overall, this force activation of fluorescence can serve as a general strategy for the development of a new class of mechano-responsive nanocomposites that impart polymeric materials with desirable functionalities including damage sensing and mechanical strength.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-efficiency stretchable light-emitting polymers from thermally activated delayed fluorescence

Stretchable light-emitting materials are the key components for realizing skin-like displays and optical biostimulation. All the stretchable emitters reported to date, to the best of our knowledge, have been based on electroluminescent polymers that only harness singlet excitons, limiting their theoretical quantum yield to 25%. Here we present a design concept for imparting stretchability onto electroluminescent polymers that can harness all the excitons through thermally activated delayed fluorescence, thereby reaching a near-unity theoretical quantum yield. We show that our design strategy of inserting flexible, linear units into a polymer backbone can substantially increase the mechanical stretchability without affecting the underlying electroluminescent processes. As a result, our synthesized polymer achieves a stretchability of 125%, with an external quantum efficiency of 10%. Additionally, we demonstrate a fully stretchable organic light-emitting diode, confirming that the proposed stretchable thermally activated delayed fluorescence polymers provide a path towards simultaneously achieving desirable electroluminescent and mechanical characteristics, including high efficiency, brightness, switching speed and stretchability as well as low driving voltage.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polymer Inhibitors Enable >900 cm2 Dynamic Windows Based on Reversible Metal Electrodeposition with High Solar Modulation

Dynamic windows with adjustable tint give users control over the flow of light and heat to decrease the carbon footprint of buildings and improve the occupants’ comfort. Despite the benefits of dynamic windows, they are rarely deployed in buildings because the existing technology cannot achieve fast and colour-neutral tinting at an agreeable cost. Reversible metal electrodeposition is a promising approach to solve these problems. Here, we demonstrate the use of polymer inhibitors to reversibly deposit metal films with controlled morphology in dynamic windows. The windows that employ the polymer inhibitor can readily tint to below 0.001% visible transmittance in less than 3 min and exhibit high infrared reflectance (>70%), colour-neutral transmittance (C*<5) and an ultrawide range of optical and solar modulation (..delta..Tvis=0.76 and ..delta..SHGC=0.56). The polymer inhibitors also increase the efficiency and improve the durability of the windows and enable construction of >900 cm2 dynamic windows with fast response and excellent uniformity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polaron absorption in aligned conjugated polymer films: breakdown of adiabatic treatments and going beyond the conventional mid-gap state model

This study provides the first experimental polarized intermolecular and intramolecular optical absorption components of field-induced polarons in regioregular poly(3-hexylthiophene-2,5-diyl), rr-P3HT, a polymer semiconductor. Highly aligned rr-P3HT thin films were prepared by a high temperature shear-alignment process that orients polymer backbones along the shearing direction. rr-P3HT in-plane molecular orientation was measured by electron diffraction, and out-of-plane orientation was measured through series of synchrotron X-ray scattering techniques. Then, with molecular orientation quantified, polarized charge modulation spectroscopy was used to probe mid-IR polaron absorption in the ℏω = 0.075 — 0.75 eV range and unambiguously assign intermolecular and intramolecular optical absorption components of hole polarons in rr-P3HT. This data represents the first experimental quantification of these polarized components and allowed long-standing theoretical predictions to be compared to experimental results. The experimental data is discrepant with predictions of polaron absorption based on an adiabatic framework that works under the Born–Oppenheimer approximation, but the data is entirely consistent with a more recent nonadiabatic treatment of absorption based on a modified Holstein Hamiltonian. This nonadiabatic treatment was used to show that both intermolecular and intramolecular polaron coherence break down at length scales significantly smaller than estimated structural coherence in either direction. Importantly, this strongly suggests that polaron delocalization is fundamentally limited by energetic disorder in rr-P3HT.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Liquid Crystal Films as Active Substrates for Nanoparticle Control

Organizing nanoparticles in a controlled way allows us to monitor their optical properties. It is particularly interesting to organize them on top of liquid crystal films to take advantage, in a second step, of the easy actuation of liquid crystals with external parameters such as temperature, electric fields, and so forth. We show that despite their fluidity, nematic and smectic films allow the formation of well-ordered hexagonal domains of gold spherical nanoparticles (AuNPs) at their surface, but we also show that both nematic films and AuNP domains impact each other. Using optical microscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM), and spectrophotometry, we compare nematic, polymer-stabilized nematic, and smectic films with AuNP domains made of NPs of diameter 6 nm. On the liquid crystal films, depressions are revealed below the AuNP domains, whereas the AuNP domains appear well-organized but with a hexagonal period shortened with respect to AuNP monolayers formed on hard substrates. We interpret these features by the anchoring tilt imposed by the AuNP domains on the liquid crystal molecules. The smectic-A layers characteristic of the nematic surface transform into smecticC layers, which induce the formation of depression. Here, the energy penalty associated with the local smectic-A/smectic-C transition induces the shortening of the AuNP domain period in order to decrease the AuNP domain surface. The observed large depth of the polymer-stabilized nematic depressions below AuNP domains may be explained either by an increased size of the polymer-stabilized smectic layers close to the surface or by an increased number of polymer-stabilized smectic liquid crystal smectic layers close to the surface with respect to pure nematic films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-pressure elasticity and equation of state of the fluoroelastomer Viton® A-500

Viton® A is a semi-crystalline copolymer of polyvinylidene fluoride and hexafluoropropylene used in various engineering applications due to its mechanical properties and chemical inertness. In situ ultrasonic spectroscopy and x-ray radiography measurements were performed in a Paris–Edinburgh press to measure the pressure dependence of the transverse and longitudinal acoustic velocity of the fluoroelastomer A-500 from 2.7 to 5.7 GPa at 296 K. In addition, we performed high-pressure Brillouin scattering measurements to obtain acoustic velocities from ambient pressure to 5.7 GPa to supplement the ultrasonic measurements, especially at low pressures. The acoustic velocities were then used to calculate a pressure–volume (P–V) equation of state, the bulk and shear moduli, and the Poisson's ratio. These quantities are compared with the reported pressure-dependent properties of related polymers over this range of pressures.

Acoustical properties↗
DOE OSTI2020

Direct Evidence of Graphene-Induced Molecular Reorientation in Polymer Films

For the first time, direct evidence of graphene-induced molecular reorientation in polymer films using polarization modulated infrared reflection absorption spectroscopy (PMIRRAS) are presented. By creating favorable electrostatic interactions, graphene-polymer interfaces can be controlled by varying polymer and solvent composition. After trans of unmodified graphene from copper onto a polymer substrate, polymer chain rearrangement relative to the orientation at the polymer-copper interface is observed using PM-IRRAS. Transfer success is characterized using both optical transmission measurements and Raman spectroscopy to quantify the transfer fidelity, i.e. graphene coverage fraction. Taken together, oxygencontaining poly(ethylene-co-vinyl acetate) shows more polymer chain rearrangement and better graphene coverage compared to oxygen-free polyethylene. Polymer composition seems to dominate graphene-polymer interactions while solvent choice has a smaller effect on transfer quality. These results are the first direct measurement of this effect and point towards the possibility of engineering graphene-polymer interactions for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Large Area Transfer of Bismuth‐Based Layered Oxide Thin Films Using a Flexible Polymer Transfer Method

Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO 3 ) and lanthanum aluminate (LaAlO 3 ) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer. In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr 3 Al 2 O 6 is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO 3 ) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Precise Control of Noncovalent Interactions in Semiconducting Polymers for High-Performance Organic Field-Effect Transistors

Performed through side-chain engineering or by incorporating intramolecular locking units, the directionality and dynamic nature of noncovalent interactions are particularly attractive for the design of novel semiconducting materials in a wide variety of applications. This work investigates the nature and position of hydrogen bonding (intra- versus intermolecular), with the objective of developing a rational approach to the design of new semiconducting materials with improved properties in the solid state. To control the polymer chains’ self-assembly, a π-conjugated polymer incorporating a moiety capable of generating intramolecular hydrogen bonding is evaluated against a polymer that allows for intermolecular hydrogen bonding. Characterization through various techniques, optical spectroscopies, grazing incidence wide-angle x-ray scattering, and solution small-angle neutron scattering showed that intramolecular hydrogen bonds resulted in materials with improved crystallinity and higher effective conjugation in the solid state. Additionally, the effect of the noncovalent interaction configuration on the optoelectronic properties was analyzed in organic field-effect transistor fabrication. Devices prepared from the materials with intramolecular hydrogen bonds showed significantly higher performance, with three orders of magnitude higher charge mobility than their counterparts fabricated from polymers with intermolecular hydrogen bonds. These results confirm the importance of chemical design on polymer structures and offer a novel route for the design of high-efficiency semiconducting polymers for next-generation electronics.

36 MATERIALS SCIENCE↗