Search NASA⌕ Search

SEARCH · Search NASA

Results for “optics space astronomy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Mounting and Alignment of Full-Shell Replicated X-Ray Optics

We are developing grazing-incidence x-ray optics for astronomy. The optics are full-cylinder mirror shells fabricated using electroformed-nickel replication off super-polished mandrels. For space-based applications where weight is at a premium, very-thin-walled, light-weight mirrors are required. Such shells have been fabricated at MSFC with greater than 15 arcsec resolution. The challenge, however, is to preserve this resolution during mounting and assembly. We present here a status report on a mounting and alignment system currently under development at Marshall Space Flight Center to meet this challenge.

Gubarev, Mikhail↗
NASA NTRS1976

Very-wide-field camera. Proposal of Space Astronomy Laboratory for second Spacelab mission

A proposal is made for inclusion of a very wide field camera onboard Spacelab. Its scientific program is outlined: detection and photometry, spectrography, and star and starlike object photography. The optics, receptor, and mechanical structure are described. Scientific and technical constraints are discussed, and a development plan is detailed. The dust contamination of Spacelab using the camera was also studied.

Courtes, G.↗
NASA NTRS1999

Hard X-Ray Measurements of Polycapillary Optics for Astronomy

Results from hard x-ray tests of a polycapillary optic will be presented. A prototype polycapillary optic consisting of about 2500 individual capillary bundles was provided by X-ray Optical Systems, Inc. The optic was tested at the 100m-long stray-light facility at Marshall Space Flight Center over the 8-50 keV energy band using a CZT detector. Significantly improved high-energy response was observed over previous versions. Implications of these results for future balloon and space astronomy missions will also be reviewed.

Kolodziejczak, Jeffery J.↗
NASA NTRS1979

Space optics: Imaging X-ray optics workshop; Proceedings of the Seminar, Huntsville, Ala., May 22-24, 1979

The papers in this volume are broadly based and represent a comprehensive summary of past achievements, new designs, techniques and future plans in space optics. The design, construction, testing and use of grazing incidence optics have played an integral role in the advance of X-ray astronomy. Topics of interest include a cosmic X-ray telescope for ARIES rocket observations, quest for ultrahigh resolution in X-ray optics, optical coating techniques for Wolter-type substrates, astronomical applications of grazing incidence telescopes with polynomial surfaces, and a paraboloidal X-ray telescope mirror for solar coronal spectroscopy.

Weisskopf, M.↗
NASA NTRS2008

Optics Requirements For The Generation-X X-Ray Telescope

US, European, and Japanese space agencies each now operate successful X-ray missions -- NASA s Chandra, ESA s XMM-Newton, and JAXA s Suzaku observatories. Recently these agencies began a collaboration to develop the next major X-ray astrophysics facility -- the International X-ray Observatory (IXO) -- for launch around 2020. IXO will provide an order-of-magnitude increase in effective area, while maintaining good (but not sub-arcsecond) angular resolution. X-ray astronomy beyond IXO will require optics with even larger aperture areas and much better angular resolution. We are currently conducting a NASA strategic mission concept study to identify technology issues and to formulate a technology roadmap for a mission -- Generation-X (Gen-X) -- to provide these capabilities. Achieving large X-ray collecting areas in a space observatory requires extremely lightweight mirrors.

O'Dell, S. .↗
NASA NTRS1984

STS science and applications payloads - An evolving perspective

The present investigation is mainly concerned with a reexamination of the Spacelab payload process. The candidate missions are considered in connection with discipline payloads or laboratories. Attention is given to the Space Biomedical Laboratory (SBL), the Space Plasma Lab (SPL), the Astronomy Research Laboratory (Astro), the Shuttle High Energy Astrophysics Laboratory (SHEAL), the Shuttle Infrared Telescope Facility (SIRTF), the Solar Optical Telescope (SOT), the Materials Sciences Laboratory (MLS), the Environmental Observations Mission (EOM), the Shuttle Radar Lab (SRL), the International Microgravity Laboratory (IML), and the Payload of Opportunity Carrier (POOC). The POOC is a low cost means of placing experiments aboard the Shuttle in the cargo bay.

Sander, M. J.↗
NASA NTRS2006

Fabrication of Extremely Lightweight Mirrors

Further progress in astronomy requires large.(approx. 10m class) space telescopes in all wavelength bands, from IR to X-rays. The enabling of this progress requires optical fabrication technologies that not only can make mirrors that are orders of magnitude less massive than the present ones, but also orders of magnitude less expensive. In the past five years, we have been developing lightweight X-ray mirrors to meet mission requirements of the Constellation-X, which is NASA s next major X-ray observatory scheduled for launch some time in the next decade. In this talk, I will describe in detail a glass forming, or slumping, technique that allows a high-fidelity copying of a mandrel s figure while preserving the microroughness of the float glass surface. In particular, I will address the possibility of applying this technique to making extremely large optical telescopes.

Zhang, William W.↗
NASA NTRS2019

Optical Design of the Origins Space Telescope

This paper discusses the optical design of the Origins Space Telescope. Origins is one of four large missions under study in preparation for the 2020 Decadal Survey in Astronomy and Astrophysics. Sensitive to the mid- and far-infrared spectrum (between 2.8 and 588 μm), Origins sets out to answer a number of important scientific questions by addressing NASA’s three key science goals in astrophysics. The Origins telescope has a 5.9 m diameter primary mirror and operates at f/14. The large on-axis primary consists of 18 ‘keystone’ segments of two different prescriptions arranged in two annuli (six inner and twelve outer segments) that together form a circular aperture in the goal of achieving a symmetric point spread function. To accommodate the 46 x 15 arcminute full field of view of the telescope at the design wavelength of λ = 30 μm, a three-mirror anastigmat configuration is used. The design is diffraction-limited across its instruments’ fields of view. A brief discussion of each of the three baselined instruments within the Instrument Accommodation Module (IAM) is presented: 1) Origins Survey Spectrometer (OSS), 2) Mid-infrared Spectrometer, Camera (MISC) transit spectrometer channel, and 3) Far-Infrared Polarimeter/Imager (FIP). In addition, the up scope options for the observatory are laid out as well including a fourth instrument: the Heterodyne Receiver for Origins (HERO).

Corsetti, James A.↗
NASA NTRS2020

Optical Design of the Origins Space Telescope

The optical design is presented for the Origins Space Telescope, one of four large missions under study in preparation for the 2020 Decadal Survey in Astronomy and Astrophysics is presented. Sensitive to the mid- and far-infrared spectrum (between 2.8 and 588 µm) and set to launch in approximately 2035, Origins sets out to answer a number of important scientific questions by addressing NASA's three key science goals in astrophysics: How does the universe work?, How did we get here, and Are we alone? To do so, Origins seeks to answer three main questions: 1) How do galaxies form stars, build up metals, and grow their central supermassive black holes from reionization to today? 2) How do the conditions for habitability develop during the process of planet formation? 3) Do planets orbiting M-dwarf stars support life?The Origins telescope has a 5.9 m diameter primary mirror and operates at f/14. The large on-axis primary consists of 18 'keystone' segments of two different prescriptions arranged in two annuli (six inner and twelve outer segments) that together form a circular aperture in the goal of achieving a symmetric point spread function. To simplify the design, the telescope will be launched with both the primary mirror segments and the secondary mirror already deployed. To accommodate the 46 x 15 arcminute full field of view of the telescope at the design wavelength of = 30 µm, a three-mirror anastigmat configuration is used. The design is diffraction-limited across its instruments' fields of view. A brief discussion of each of the three baselined instruments within the Instrument Accommodation Module (IAM) is presented: 1) Origins Survey Spectrometer (OSS), 2) Mid-infrared Spectrometer, Camera (MISC) transit spectrometer channel, and 3) Far-Infrared Polarimeter/Imager (FIP). In addition, the upscope options for the observatory are laid out as well, including a fourth instrument: the Heterodyne Receiver for Origins (HERO).

Howard, Joseph↗
NASA NTRS2019

Optical Design of the Origins Space Telescope

This paper discusses the optical design of the Origins Space Telescope. Origins is one of four large missions under study in preparation for the 2020 Decadal Survey in Astronomy and Astrophysics. Sensitive to the mid- and far-infrared spectrum (between 2.8 and 588 μm), Origins sets out to answer a number of important scientific questions by addressing NASA’s three key science goals in astrophysics. The Origins telescope has a 5.9 m diameter primary mirror and operates at f/14. The large on-axis primary consists of 18 ‘keystone’ segments of two different prescriptions arranged in two annuli (six inner and twelve outer segments) that together form a circular aperture in the goal of achieving a symmetric point spread function. To accommodate the 46 x 15 arcminute full field of view of the telescope at the design wavelength of λ = 30 μm, a three-mirror anastigmat configuration is used. The design is diffraction-limited across its instruments’ fields of view. A brief discussion of each of the three baselined instruments within the Instrument Accommodation Module (IAM) is presented: 1) Origins Survey Spectrometer (OSS), 2) Mid-infrared Spectrometer, Camera (MISC) transit spectrometer channel, and 3) Far-Infrared Polarimeter/Imager (FIP). In addition, the upscope options for the observatory are laid out as well including a fourth instrument: the Heterodyne Receiver for Origins (HERO).

James A Corsetti↗
NASA NTRS2002

Comparison of Stress Relief Procedures for Cryogenic Aluminum Mirrors

The Infrared Multi-Object Spectrograph (IRMOS) is a facility instrument for the Kitt Peak National Observatory Mayall Telescope (3.8 meter) and an engineering prototype for a potential design for the Next Generation Space Telescope/Multi-Object Spectrograph. IRMOS is a low-to mid-resolution (R = lambda/delta-lambda = 300-3800), near-IR (0.8-2.5 micron) spectrograph which produces simultaneous spectra of approximately 100 objects in its 2.8 x 2.0 arcmin field of view using a commercial MEMS multimirror array device. The instrument operating temperature is 80 K and the design is athermal --- the optical bench and mirrors are machined from aluminum 6061-T651. In spite of its baseline mechanical stress relief, aluminum 6061-T651 harbors some residual stress, which, unless relieved during fabrication, may relieve and distort mirror figure to unacceptable levels at the operating temperature. Other cryogenic instruments using aluminum mirrors for both ground-based and space IR astronomy have employed a variety of heat treatment formulae, with mixed results. We present the results of a test program designed to empirically determine the best stress relief procedure for the IRMOS mirrors. Identical test mirrors with spherical and flat optical prescriptions are processed with five different heat treatment formulae from the literature and compared to samples with out any additional processing. After figuring via diamond turning, the mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for several thermal cycles. The heat treatment procedure for the mirrors that yielded the least and most repeatable change in figure error and radius is applied to the IRMOS mirror blanks. We correlate the results of our optical testing with heat treatment and metallographic data.

Ohl, Raymond G.↗
NASA NTRS1990

Thermal performance of a five year lifetime superfluid helium dewar for SIRTF

The Space Infrared Telescope Facility (SIRTF) is a 1 m class cryogenically cooled observatory for infrared astronomy. The SIRTF cryogenic system has to satisfy the five year mission lifetime requirement as well as to provide sufficient cooling for the science instruments and optical system. A 4000 cu dm superfluid helium dewar has been selected for the current baseline cryogenic system which represents the largest superfluid helium dewar proposed to date for a long lifetime space-borne application. This paper discusses the design and predicted performance of the current cryogenic system, as well as its comparison with IRAS and other space-borne superfluid helium dewars currently under development.

Lee, J. H.↗
NASA NTRS1986

Preliminary measurements of very low dark currents in MLA/SWIR HgCdTe/DRO arrays

In infrared astronomy observations, one of the key detector performance parameters is the dark current which, together with the optics, establishes the fundamental limit of a space-based instrument. This technical note summarizes an effort to measure dark current performance of the MLA/Short Wave Infrared photovoltaic HgCdTe array (2.5 micron cutoff) at temperatures from 65 to 120 K. The preliminary results indicate that dark current decreased systematically to 100 K, then the value became measurement-limited at about 3.0 E-18 A/pixel, or 19 electrons/sec/pixel.

Yang, B. T.↗
NASA NTRS1995

A scientific assessment of a new technology orbital telescope

As part of a program designed to test the Alpha chemical laser weapons system in space, the Ballistic Missile Defense Organization (BMDO) developed components of an agile, lightweight, 4-meter telescope, equipped with an advanced active-optics system. BMDO had proposed to make space available in the telescope's focal plane for instrumentation optimized for scientific applications in astrophysics and planetary astronomy for a potential flight mission. Such a flight mission could be undertaken if new or additional sponsorship can be found. Despite this uncertainty, BMDO requested assistance in defining the instrumentation and other design aspects necessary to enhance the scientific value of a pointing and tracking mission. In response to this request, the Space Studies Board established the Task Group on BMDO New Technology Orbital Observatory (TGBNTOO) and charged it to: (1) provide instrumentation, data management, and science-operations advice to BMDO to optimize the scientific value of a 4-meter mission; and (2) support a space studies board assessment of the relative scientific merit of the program. This report deals with the first of these tasks, assisting the Advanced Technology Demonstrator's (ATD's) program scientific potential. Given the potential scientific aspects of the 4-meter telescope, this project is referred to as the New Technology Orbital Telescope (NTOT), or as the ATD/NTOT, to emphasize its dual-use character. The task group's basic conclusion is that the ATD/NTOT mission does have the potential for contributing in a major way to astronomical goals.

Source record↗
NASA NTRS2002

SIM white light on-board processing algorithms

Interferometry in optical astronomy is an important and growing field of astronomical observation. A number of stellar interferometers have come online over the past several years, and several more are due to be operational in the near future. In addition, space based interferometers are also planned missions of NASA's Origins program, including the Space Interferometry Mission (SIM), the focus of the present paper. The fundamental measurement made by each of these interferometers is the white light fringe measurement to determine the optical pathlength delay between the two arms of the interferometer. SIM makes white light measurements with three independent interferometers observing three different objects. Two of these are the "guide" interferometers that observe bright objects (approximately 7th magnitude) to track the rigid body motion of the instrument. The third interferometer, the "science" interferometer, observes the science targets of interest.

interferometry↗
NASA NTRS1990

Research and technology, 1990: Goddard Space Flight Center

Goddard celebrates 1990 as a banner year in space based astronomy. From above the Earth's obscuring atmosphere, four major orbiting observatories examined the heavens at wavelengths that spanned the electromagnetic spectrum. In the infrared and microwave, the Cosmic Background Explorer (COBE), measured the spectrum and angular distribution of the cosmic background radiation to extraordinary precision. In the optical and UV, the Hubble Space Telescope has returned spectacular high resolution images and spectra of a wealth of astronomical objects. The Goddard High Resolution Spectrograph has resolved dozens of UV spectral lines which are as yet unidentified because they have never before been seen in any astronomical spectrum. In x rays, the Roentgen Satellite has begun returning equally spectacular images of high energy objects within our own and other galaxies.

Source record↗
NASA NTRS2018

Interstellar PAHs: From Ground to Space, Expanding Spectroscopic Frontiers

Recent progress in astrochemistry and in our understanding of the Molecular Universe has been driven by new detector technologies and advances in ground-, airborne- and space astronomy coupled to new, innovative approaches in molecular spectroscopy. The search for the complex carbon-based molecules (PAHs, Fullerenes, nanoparticles) thought to be responsible for the ubiquitous infrared emission bands (UIBs) and optical absorption bands (DIBs) that are observed in various regions of the interstellar medium of local- and extragalactic environments illustrates the progress in spectroscopy techniques that has been driven by astronomy. Recent progresses reached in this domain will be discussed together with the laboratory techniques that have been developed to measure the spectra of laboratory analogs of cosmic molecules in the UV Visible-NIR range under experimental conditions that attempt to reproduce the interstellar conditions.

Laboratory astrophysics and astrochemistry↗
NASA NTRS2002

Studies of Dust Emission as Measured by DIRBE and IRAS

The main activity supported by this grant was to make the dust reddening map more useful for optical and microwave astronomy, and to increase our understanding of interstellar dust in general. We completed all the major objectives of the proposal, and we are eagerly awaiting the launch of Space Infrared Telescope Facility (SIRTF) so that we can check one of our most controversial conclusions. According to the ADS abstract service, the above paper has been cited 895 times. A number of authors have claimed the SFD98 dust maps are miscalibrated, but recent work suggests that the calibration is correct. The primary goal of this ADP grant was to determine the microwave / sum-mm spectrum of interstellar dust emission by cross-correlating the Far Infrared Absolute Spectrophotometer (FIRAS) spectra with a model based on the SFD98 dust map. Because of temperature variation, large (factor of two) variations are observed in submillimeter / 100 micron ratio, so a careful accounting of dust temperature data, based on Diffuse Infrared Background Experiment (DIRBE) 100 and 240 micron channels, was required. Even this improvement was unable to reduce the chi(sup 2) per degree of freedom below 30. Further study revealed that a two-component model, with the two components having different (but reasonable) optical properties, achieved a decrease in chi(sup 2) to less than 2, five times better than the next best fit in the literature. The resulting model uses density and temperature estimates based on DIRBE data, with only four global parameters fit using the FIRAS data. This dramatic reduction in chi(sup 2) using only four fit parameters may indicate that the model is physically correct, but in any case, it is an acceptable phenomenological model. We have released the appropriate data and software on our website (http://astro.berkeley.edu/dust) to allow users to compute the interstellar dust emission between from 100-3000 GHz (or 100 micron 3 mm) with approx. 15% precision. The paper describing these efforts appeared in ApJ 524, 867. This paper has to date been cited 24 times.

Davis, Marc↗