Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimisation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Optimisation of the material properties of indium tin oxide layers for use in organic photovoltaics

The influence of indium tin oxide [(In{sub 2}O{sub 3}:Sn), ITO] material properties on the output performance of organic photovoltaic (OPV) devices has been modelled and investigated. In particular, the effect of altering carrier concentration (n), thickness (t), and mobility (μ{sub e}) in ITO films and their impact on the optical performance, parasitic resistances and overall efficiency in OPVs was studied. This enables optimal values of these parameters to be calculated for solar cells made with P3HT:PC{sub 61}BM and PCPDTBT:PC{sub 71}BM active layers. The optimal values of n, t and μ{sub e} are not constant between different OPV active layers and depend on the absorption spectrum of the underlying active layer material system. Consequently, design rules for these optimal values as a function of donor bandgap in bulk-heterojunction active layers have been formulated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InAlN high electron mobility transistor Ti/Al/Ni/Au Ohmic contact optimisation assisted by in-situ high temperature transmission electron microscopy

This paper correlates the micro-structural and electrical characteristics associated with annealing of metallic multi-layers typically used in the formation of Ohmic contacts to InAlN high electron mobility transistors. The multi-layers comprised Ti/Al/Ni/Au and were annealed via rapid thermal processing at temperatures up to 925 °C with electrical current-voltage analysis establishing the onset of Ohmic (linear IV) behaviour at 750–800 °C. In-situ temperature dependent transmission electron microscopy established that metallic diffusion and inter-mixing were initiated near a temperature of 500 °C. Around 800 °C, inter-diffusion of the metal and semiconductor (nitride) was observed, correlating with the onset of Ohmic electrical behaviour. The sheet resistance associated with the InAlN/AlN/GaN interface is highly sensitive to the anneal temperature, with the range depending on the Ti layer thickness. The relationship between contact resistivity and measurement temperature follow that predicted by thermionic field emission for contacts annealed below 850 °C, but deviated above this due to excessive metal-semiconductor inter-diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of thulium fibre laser parameters with generation of pulses by pump modulation

The formation of relaxation pulses of a thulium fibre laser (λ = 1.9 μm) by modulating the power of a pump erbium fibre laser (λ = 1.55 μm) is studied. A theoretical model is developed to find the dependences of pulse duration and peak power on different cavity parameters. The optimal cavity parameters for achieving the minimal pulse duration are determined. The results are confirmed by experimental development of a laser emitting pulses with a duration shorter than 10 ns, a peak power of 1.8 kW and a repetition rate of 50 kHz. (control of radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interstellar laser communication: implementability criterion and optimisation conditions for the addressed signal search and sending

Using new opportunities offered by the construction of large optical telescopes, a laser radiation receiver with an iodine active quantum filter, high-energy iodine lasers with a diffraction-limited beam divergence and the discovery of exoplanets of the Earth type, including those located relatively not far from the Sun, we analyse the implementability of interstellar laser communication under the conditions, when the central spot of the diffraction pattern at the place of the laser signal reception by means of large optical telescopes can be made smaller than the orbit of the planet, and the signals come to the specified point of the orbit not synchronously with the planet motion because of the error in the determination of the distance between the Sun and the star, around which the planet chosen for communication rotates. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimisation of an acoustically antiguiding structure for raising the stimulated Brillouin scattering threshold in optical fibres

Optical fibres having a radially nonuniform acoustically antiguiding structure produced by codoping their core with alumina and germania have been fabricated and investigated. The influence of the shape of the antiguiding acoustic refractive index profile and fibre core diameter on the stimulated Brillouin scattering (SBS) threshold and spectrum in the fibres has been assessed. An increase in SBS threshold by 4.4 dB with respect to a germanosilicate fibre having the same mode field diameter has been demonstrated. (optical fibres)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Target optimisation for the yield of X-rays of desired hardness under femtosecond pulse irradiation

Different regimes of electron acceleration from solid foils and low-density targets are investigated using three-dimensional numerical simulations. The size of the plasma corona is shown to be the main parameter characterising the temperature and number of hot electrons, which determine the yield of X-ray radiation and its hardness. Also studied is the generation of X-ray radiation by laseraccelerated electrons, which bombard the converter target located behind the laser target. (extreme laser radiation: physics and fundamental applications)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimisation of the parameters of a broadband multibeam-pumped optical parametric amplifier

We report the results of the numerical simulation of the output amplifier stage of a high-power laser system based on parametric amplification of femtosecond pulses in an LBO crystal under multibeam pumping. A technique is described for choosing an optimal amplifier configuration with an arbitrary number of pump beams to provide a wide spectral gain band with a minimum loss due to parametric diffraction. The results of simulating the parametric amplification, amplification efficiency, and spatial profile of amplified radiation with allowance for the interference of amplified parasitic beams are presented. A possibility of eliminating the spatial modulation of the amplified radiation intensity, which occurs when using spatial filters, is demonstrated. An increase in the number of pump beams is found to rise the amplified pulse duration, slightly (from 20 to 21 fs) for incoherent pump beams and more significantly (to 25 fs) for coherent beams. The amplification efficiency is reduced from 23% to 21% in the former case and to 11% in the latter case. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of the prism coupling of optical whispering-gallery-mode microcavities

The methods for increasing the coupling efficiency of a prism with spheroidal microcavities, aimed at exciting whispering-gallery modes, have been analytically investigated. Optimal angles of incidence and incident beam parameters are obtained for a spheroidal cavity. The cavity eigenfrequency shift caused by the presence of a prism and the introduced loss by it is calculated. (resonators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of spontaneous four-wave mixing in a ring microcavity

A theory of spontaneous four-wave mixing in a ring microcavity is developed. The rate of emission of biphotons for pulsed and monochromatic pumping with allowance for the dispersion of group velocities is analytically calculated. In the first case, pulses in the form of an increasing exponential are considered, which are optimal for excitation of an individual resonator mode. The behaviour of the group velocity dispersion as a function of the width and height of the waveguide is studied for a specific case of a ring microcavity made of silicon nitride. The results of the numerical calculation are in good agreement with the experimental data. The ring microcavity is made of two types of waveguides: completely etched and half etched. It is found that the latter allow for better control over the parameters in the manufacturing process, making them more predictable. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of the optical scheme of a compact double-pass Nd : YAG amplifier for range finding

It is shown that the use of misalignment and a divergent incident beam in a double-pass Nd : YAG amplifier of a master oscillator – amplifier system used in ranger finding makes it possible both to increase the output pulse energy and to improve the output beam quality. The misalignment suppresses the amplifier self-excitation caused by a finite contrast of the output polariser. The use of a divergent incident beam allows one to increase the efficiency of energy extraction from the amplifier and to decrease the vignetting effect. The experimental results agree with the results of numerical simulation. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of a multi-disk cryogenic amplifier for a high-intensity, high-repetition-rate laser system

Holders of the active elements of a multi-disk multipass amplifier with a liquid-free closed cryogenic cooling cycle are modified. The equilibrium temperature of the active elements is experimentally investigated in relation to the power of diode pumping for the modified crystal holders. The dependence of the gain coefficient on the temperature of the active elements is measured. A small-signal gain of up to 1.2 is obtained in a single pass through the active element. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimisation of parameters of Raman laser pulse compression in a plasma for its implementation using the PEARL laser facility (IAP RAS)

We consider Raman compression of laser pulses in a plasma under the conditions of an experiment planned at the Institute of Applied Physics of the Russian Academy of Sciences on the PEARL laser facility. The analysis is based on the equations describing, among other things, the effect of plasma dispersion and relativistic nonlinearity, as well as the dynamics of the field near the plasma wave breaking threshold. It is shown that the main limiting factors are excessive frequency modulation of the pump pulse and a too low plasma density in which the plasma wave breaking can occur. To reduce the negative influence of these effects, we suggest using an intense and short (on the order of the plasma period) seed laser pulse. Numerical simulation shows the possibility of a hundredfold increase in the intensity of the compressed pulse in comparison with the intensity of the pump pulse at a length of uniform plasma of 2 cm. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Process planning and optimisation of laser cladding considering hydrodynamics and heat dissipation geometry of parts

A hydrodynamic model has been developed, which allows planning the laser cladding process, taking into account the heat dissipation geometry. Typical situations of heat dissipation are considered at 3D parts printing: diffusion into a massive substrate, the edge of a massive part, and a thin wall. The laser power regimes are determined for different heat-dissipation geometries. The possibility of high-quality laser cladding at small turning radii is shown. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of gamma radiation by a subterawatt ultrashort laser pulse: optimisation of preplasma and pulse duration

We report an experimental and numerical study of the acceleration of electrons in a plasma interacting with a subterawatt laser pulse (intensity of ∼3 × 10{sup 18} W cm{sup −2} at a pulse duration of 50 fs). A preplasma layer on the surface of a molybdenum target is formed by an additional laser pulse with a duration of 8 ns and an intensity of ∼2 × 10{sup 12} W cm{sup −2}. It is shown that an increase in the laser pulse duration to 1700 fs at a constant energy (and a proportional decrease in intensity) leads to an increase in the yield of bremsstrahlung γ-radiation by more than an order of magnitude when the nanosecond pulse is ahead of the femtosecond one by 15 − 25 ns. Interferometry data and results of diagnostics of optical and γ-radiation of a plasma demonstrate that the collisional ionisation of atoms by electrons oscillating in the field of such a laser pulse plays an essential role in the formation of electron density profile. The sensitivity of the described effect to the level of amplified spontaneous emission is determined, despite the nanosecond pulse impact. Numerical simulations show that at a large pulse duration, the acceleration of electrons is stipulated by the beaking of plasma waves excited during stimulated Raman scattering of laser radiation. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coordinate parameterisation and spectral method optimisation for Beltrami field solver in stellarator geometry

The numerical solution of the stepped pressure equilibrium (Hudson et al 2012 Phys. Plasmas 19 112502) requires a fast and robust solver to obtain the Beltrami field in three-dimensional geometry such as stellarators. The spectral method implemented in the stepped pressure equilibrium code (SPEC) is efficient when the domain is a hollow torus, but ill-conditioning of the discretised linear equations occurs in the (solid) toroid due to the artificially singular coordinate parameterisation near the axis. Here, we propose an improved choice for the reference axis to prevent coordinates surfaces from overlapping. Then, we examine the parity and asymptotics of the magnetic vector potential near the axis and suggest the use of recombined and rescaled Zernike radial basis functions. The maximum relative error in the magnetic field of the Wendelstein 7-X geometry is shown to reach 10 –9 at high resolution in a series of convergence tests and benchmarks against the boundary integral equation solver for Taylor states. The new method is also reported to significantly improve the accuracy of multi-volume SPEC calculations. A comparison between free-boundary SPEC and the analytical Dommaschk potential is presented with higher-than-usual Fourier resolution. It is illustrated that we are able to resolve low amplitude current sheets when an interface is placed where there is no flux surface in the analytic solution. This was previously concealed because of insufficient numerical resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗