Search NASA⌕ Search

SEARCH · Search NASA

Results for “output feedback”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Design of localizer capture and track hold for a transport airplane - An H(infinity)/LTR approach

The authors describe the design of a lateral track-hold control law in a localizer capture and track autopilot using a procedure based on H(infinity)-optimization and loop transfer recovery. The recovery of the achievable performance using output feedback from a satisfactory track-hold design obtained in an H(infinity)-optimization is demonstrated. Simulation for a lateral track command is presented along with robustness properties of the output feedback design. Results indicate that the recovery of achievable performance must be carefully traded-off against control bandwidth limitation.

Chen, B. M.↗
NASA NTRS1976

A linear-quadratic-Gaussian control problem with innovations-feedthrough solution

The structure of the separation-theorem solution to the standard linear-quadratic-Gaussian (LQG) control problem does not involve direct output feedback as a consequence of the form of the performance index. It is shown that the performance index may be generalized in a natural fashion so that the optimal control law involves output feedback or, equivalently, innovations feedthrough (IF). Applications where this formulation may be advantageous are indicated through an examination of properties of the IF control law.

Platzman, L. K.↗
NASA NTRS1983

Active flutter control using discrete optimal constrained dynamic compensators

A method for synthesizing digital active flutter suppression controllers using the concept of optimal output feedback is presented. A recently developd convergent algorithm is employed to determine constrained control law parameters that minimize an infinite-time discrete quadratic performance index. Low-order compensator dynamics are included in the control law and the compensator parameters are computed along with the output feedback gain as part of the optimization process. An input noise adjustment procedure is used to improve the stability margins of the digital active flutter controller. Results from investigations into sample rate variation, prefilter pole variation, and effects of varying flight condtions are discussed. The study indicates that a digital control law which accommodates computation delay can stabilize the wing with reasonable rms performance and adequate stability margins.

Broussard, J. R.↗
NASA NTRS1988

A parametric LQ approach to multiobjective control system design

The synthesis of a constant parameter output feedback control law of constrained structure is set in a multiple objective linear quadratic regulator (MOLQR) framework. The use of intuitive objective functions such as model-following ability and closed-loop trajectory sensitivity, allow multiple objective decision making techniques, such as the surrogate worth tradeoff method, to be applied. For the continuous-time deterministic problem with an infinite time horizon, dynamic compensators as well as static output feedback controllers can be synthesized using a descent Anderson-Moore algorithm modified to impose linear equality constraints on the feedback gains by moving in feasible directions. Results of three different examples are presented, including a unique reformulation of the sensitivity reduction problem.

Kyr, Douglas E.↗
NASA NTRS1988

A parametric LQ approach to multiobjective control system design

The synthesis of a constant parameter output feedback control law of constrained structure is set in a multiple-objective linear quadratic regulator (MOLQR) framework. The use of intuitive objective functions such as model-following ability and closed-loop trajectory sensitivity allows multiple-objective decision-making techniques, such as the surrogate worth tradeoff method, to be applied. For the continuous-time deterministic problem with an infinite time horizon, dynamic compensators as well as static output feedback controllers can be synthesized using a descent Anderson-Moore algorithm modified to impose linear equality constraints on the feedback gains by moving in feasible directions. Results of three different examples are presented, including a unique reformulation of the sensitivity reduction problem.

Kyr, Doug↗
NASA NTRS1987

Fixed order compensator design based on frequency shaped cost functionals

This paper treats the design of fixed order compensators using frequency shaped cost functionals. The formulation is done in an output feedback setting which exploits an observer canonical form to represent the compensator dynamics. The major advantages of the design approach are that the order of the compensator is fixed by the design process, and it is not necessary to realize the frequency shaping dynamics as an integral part of the compensator design. This avoids the two-step approach of full state feedback design followed by the design of an observer, which in the case of a full order observer requires a compensator of order n + nf where n is the order of the plant and nf is the order of the frequency shaping realization. The formulation also precludes the use of direct feedback of the plant output, thus reducing the effect of sensor noise and improving the robustness to high frequency unmodeled dynamics. A structural vibration model describing the fast dynamics of a lightweight flexible arm is used as an example to illustrate the design procedure.

Calise, Anthony J.↗
NASA NTRS1989

Design Of Combined Stochastic Feedforward/Feedback Control

Methodology accommodates variety of control structures and design techniques. In methodology for combined stochastic feedforward/feedback control, main objectives of feedforward and feedback control laws seen clearly. Inclusion of error-integral feedback, dynamic compensation, rate-command control structure, and like integral element of methodology. Another advantage of methodology flexibility to develop variety of techniques for design of feedback control with arbitrary structures to obtain feedback controller: includes stochastic output feedback, multiconfiguration control, decentralized control, or frequency and classical control methods. Control modes of system include capture and tracking of localizer and glideslope, crab, decrab, and flare. By use of recommended incremental implementation, control laws simulated on digital computer and connected with nonlinear digital simulation of aircraft and its systems.

Halyo, Nesim↗
NASA NTRS1989

Robust fixed order dynamic compensation for large space structure control

A simple formulation for designing fixed order dynamic compensators which are robust to both uncertainty at the plant input and structured uncertainty in the plant dynamics is presented. The emphasis is on designing low order compensators for systems of high order. The formulation is done in an output feedback setting which exploits an observer canonical form to represent the compensator dynamics. The formulation also precludes the use of direct feedback of the plant output. The main contribution lies in defining a method for penalizing the states of the plant and of the compensator, and for choosing the distribution on initial conditions so that the loop transfer matrix approximates that of a full state design. To improve robustness to parameter uncertainty, the formulation avoids the introduction of sensitivity states, which has led to complex formulations in earlier studies where only structured uncertainty has been considered.

Calise, Anthony J.↗
NASA NTRS1980

Asymptotic Eigenstructures

The behavior of the closed loop eigenstructure of a linear system with output feedback is analyzed as a single parameter multiplying the feedback gain is varied. An algorithm is presented that computes the asymptotically infinite eigenstructure, and it is shown how a system with high gain, feedback decouples into single input, single output systems. Then a synthesis algorithm is presented which uses full state feedback to achieve a desired asymptotic eigenstructure.

Thompson, P. M.↗
NASA NTRS1976

Reduced state feedback gain computation

Because application of conventional optimal linear regulator theory to flight controller design requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. Therefore, a stochastic linear model that was developed is presented which accounts for aircraft parameter and initial uncertainty, measurement noise, turbulence, pilot command and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell. Results using a seventh order process show the proposed procedures to be very effective.

Kaufman, H.↗
NASA NTRS1986

Fault tolerant control laws

A systematic procedure for the synthesis of fault tolerant control laws to actuator failure has been presented. Two design methods were used to synthesize fault tolerant controllers: the conventional LQ design method and a direct feedback controller design method SANDY. The latter method is used primarily to streamline the full-state Q feedback design into a practical implementable output feedback controller structure. To achieve robustness to control actuator failure, the redundant surfaces are properly balanced according to their control effectiveness. A simple gain schedule based on the landing gear up/down logic involving only three gains was developed to handle three design flight conditions: Mach .25 and Mach .60 at 5000 ft and Mach .90 at 20,000 ft. The fault tolerant control law developed in this study provides good stability augmentation and performance for the relaxed static stability aircraft. The augmented aircraft responses are found to be invariant to the presence of a failure. Furthermore, single-loop stability margins of +6 dB in gain and +30 deg in phase were achieved along with -40 dB/decade rolloff at high frequency.

Ly, U. L.↗
NASA NTRS1973

Pole and zero placement in multivariable control systems

A method is proposed for designing multivariable systems based on an alternate derivation of Davison's theorem on pole placement and the solution of the nonlinear equations for the feedback gains by the least square error method. Output feedback is used to control a complex dynamical system. The freedom in design, after allocating poles, is used to place zeros and/or satisfy other design objectives. This method results in algorithms which are computationally attractive. However, this is done at a considerable sacrifice in terms of the design freedom available. For a system with m inputs and p outputs only m + p variables are available instead of mp variables.

Sridhar, B.↗
NASA NTRS2010

Data-Based Predictive Control with Multirate Prediction Step

Data-based predictive control is an emerging control method that stems from Model Predictive Control (MPC). MPC computes current control action based on a prediction of the system output a number of time steps into the future and is generally derived from a known model of the system. Data-based predictive control has the advantage of deriving predictive models and controller gains from input-output data. Thus, a controller can be designed from the outputs of complex simulation code or a physical system where no explicit model exists. If the output data happens to be corrupted by periodic disturbances, the designed controller will also have the built-in ability to reject these disturbances without the need to know them. When data-based predictive control is implemented online, it becomes a version of adaptive control. One challenge of MPC is computational requirements increasing with prediction horizon length. This paper develops a closed-loop dynamic output feedback controller that minimizes a multi-step-ahead receding-horizon cost function with multirate prediction step. One result is a reduced influence of prediction horizon and the number of system outputs on the computational requirements of the controller. Another result is an emphasis on portions of the prediction window that are sampled more frequently. A third result is the ability to include more outputs in the feedback path than in the cost function.

Barlow, Jonathan S.↗
NASA NTRS1987

Reducing model uncertainty effects in flexible manipulators through the addition of passive damping

An important issue in the control of practical systems is the effect of model uncertainty on closed loop performance. This is of particular concern when flexible structures are to be controlled, due to the fact that states associated with higher frequency vibration modes are truncated in order to make the control problem tractable. Digital simulations of a single-link manipulator system are employed to demonstrate that passive damping added to the flexible member reduces adverse effects associated with model uncertainty. A controller was designed based on a model including only one flexible mode. This controller was applied to larger order systems to evaluate the effects of modal truncation. Simulations using a Linear Quadratic Regulator (LQR) design assuming full state feedback illustrate the effect of control spillover. Simulations of a system using output feedback illustrate the destabilizing effect of observation spillover. The simulations reveal that the system with passive damping is less susceptible to these effects than the untreated case.

Alberts, T. E.↗
NASA NTRS1990

Multivariable flight control synthesis and literal robustness analysis for an aeroelastic vehicle

An integrated flight/aeroelastic control law is developed analytically for a hypothetical large supersonic transport aircraft in which the first aeroelastic mode frequency of the fuselage (6 rad/sec) is near the short-period mode (2 rad/sec). The approach employed is based on a linear-quadratic-regulator (LQR) formulation (yielding model-following state-feedback gains), followed by asymptotic loop-transfer recovery of LQR robustness (to produce an output-feedback control law). The derivation is outlined, and numerical results comparing the performance and multivariate stability robustness of the present controller with those of a classical controller are presented in graphs. The two controllers are shown to have similar characteristics, even with respect to the sources of limitations on robustness.

Schmidt, David K.↗
NASA NTRS2013

Integrated Model Reduction and Control of Aircraft with Flexible Wings

This paper presents an integrated approach to the modeling and control of aircraft with exible wings. The coupled aircraft rigid body dynamics with a high-order elastic wing model can be represented in a nite dimensional state-space form. Given a set of desired output covariance, a model reduction process is performed by using the weighted Modal Cost Analysis (MCA). A dynamic output feedback controller, which is designed based on the reduced-order model, is developed by utilizing output covariance constraint (OCC) algorithm, and the resulting OCC design weighting matrix is used for the next iteration of the weighted cost analysis. This controller is then validated for full-order evaluation model to ensure that the aircraft's handling qualities are met and the uttering motion of the wings suppressed. An iterative algorithm is developed in CONDUIT environment to realize the integration of model reduction and controller design. The proposed integrated approach is applied to NASA Generic Transport Model (GTM) for demonstration.

AEROELASTIC↗
NASA NTRS1988

R-parametrization and its role in classification of linear multivariable feedback systems

A classification of all the compensators that stabilize a given general plant in a linear, time-invariant multi-input, multi-output feedback system is developed. This classification, along with the associated necessary and sufficient conditions for stability of the feedback system, is achieved through the introduction of a new parameterization, referred to as R-Parameterization, which is a dual of the familiar Q-Parameterization. The classification is made to the stability conditions of the compensators and the plant by themselves; and necessary and sufficient conditions are based on the stability of Q and R themselves.

Chen, Robert T. N.↗